linux-kernel - [PATCH 04/10] usb: phy: ab8500-usb: restart phy during probe

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1368619413-24647-5-git-send-email-fabio.baltieri@linaro.org>
Date:	Wed, 15 May 2013 14:03:27 +0200
From:	Fabio Baltieri <fabio.baltieri@...aro.org>
To:	Felipe Balbi <balbi@...com>
Cc:	Linus Walleij <linus.walleij@...aro.org>,
	Lee Jones <lee.jones@...aro.org>,
	Praveena Nadahally <praveen.nadahally@...ricsson.com>,
	linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
	Sakethram Bommisetti <sakethram.bommisetti@...ricsson.com>,
	Fabio Baltieri <fabio.baltieri@...aro.org>
Subject: [PATCH 04/10] usb: phy: ab8500-usb: restart phy during probe

From: Sakethram Bommisetti <sakethram.bommisetti@...ricsson.com>

Add an ab8500_usb_restart_phy() function called during probe to ensure
that the AB8500 USB phy is initialized properly even when a cable is
connected at probe time.

Without this fix subsequent host reconnections are not detected
properly.

Acked-by: Linus Walleij <linus.walleij@...aro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@...com>
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@...ricsson.com>
Signed-off-by: Fabio Baltieri <fabio.baltieri@...aro.org>
---
 drivers/usb/phy/phy-ab8500-usb.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index cc0d7e5..bbe51cc 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -668,6 +668,33 @@ static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
 	return 0;
 }
 
+static void ab8500_usb_restart_phy(struct ab8500_usb *ab)
+{
+	abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+			AB8500_BIT_PHY_CTRL_DEVICE_EN,
+			AB8500_BIT_PHY_CTRL_DEVICE_EN);
+
+	udelay(100);
+
+	abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+			AB8500_BIT_PHY_CTRL_DEVICE_EN,
+			0);
+
+	abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+			AB8500_BIT_PHY_CTRL_HOST_EN,
+			AB8500_BIT_PHY_CTRL_HOST_EN);
+
+	udelay(100);
+
+	abx500_mask_and_set_register_interruptible(ab->dev,
+			AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+			AB8500_BIT_PHY_CTRL_HOST_EN,
+			0);
+}
+
 static int ab8500_usb_regulator_get(struct ab8500_usb *ab)
 {
 	int err;
@@ -887,6 +914,12 @@ static int ab8500_usb_probe(struct platform_device *pdev)
 	/* Needed to enable ID detection. */
 	ab8500_usb_wd_workaround(ab);
 
+	/*
+	 * This is required for usb-link-status to work properly when a
+	 * cable is connected at boot time.
+	 */
+	ab8500_usb_restart_phy(ab);
+
 	abx500_usb_link_status_update(ab);
 
 	dev_info(&pdev->dev, "revision 0x%2x driver initialized\n", rev);
-- 
1.8.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/