[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1368619413-24647-9-git-send-email-fabio.baltieri@linaro.org>
Date: Wed, 15 May 2013 14:03:31 +0200
From: Fabio Baltieri <fabio.baltieri@...aro.org>
To: Felipe Balbi <balbi@...com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Lee Jones <lee.jones@...aro.org>,
Praveena Nadahally <praveen.nadahally@...ricsson.com>,
linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
Fabio Baltieri <fabio.baltieri@...aro.org>
Subject: [PATCH 08/10] usb: phy: ab8500-usb: add flag bits to control driver features
Introduce a "flags" field in "struct ab8500_usb" to allow controlling
driver features and quirks depending on ab8500 chip variant and
revision.
Acked-by: Linus Walleij <linus.walleij@...aro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@...com>
Signed-off-by: Fabio Baltieri <fabio.baltieri@...aro.org>
---
drivers/usb/phy/phy-ab8500-usb.c | 109 ++++++++++++++++++++++++++-------------
1 file changed, 73 insertions(+), 36 deletions(-)
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 9b9a975..4591698 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -121,6 +121,17 @@ enum ab8500_usb_mode {
USB_DEDICATED_CHG
};
+/* Register USB_LINK_STATUS interrupt */
+#define AB8500_USB_FLAG_USE_LINK_STATUS_IRQ (1 << 0)
+/* Register ID_WAKEUP_F interrupt */
+#define AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ (1 << 1)
+/* Register VBUS_DET_F interrupt */
+#define AB8500_USB_FLAG_USE_VBUS_DET_IRQ (1 << 2)
+/* Driver is using the ab-iddet driver*/
+#define AB8500_USB_FLAG_USE_AB_IDDET (1 << 3)
+/* Enable setting regulators voltage */
+#define AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE (1 << 4)
+
struct ab8500_usb {
struct usb_phy phy;
struct device *dev;
@@ -136,6 +147,7 @@ struct ab8500_usb {
int previous_link_status_state;
struct pinctrl *pinctrl;
struct pinctrl_state *pins_sleep;
+ unsigned int flags;
};
static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x)
@@ -174,7 +186,7 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
if (ret)
dev_err(ab->dev, "Failed to enable v-ape\n");
- if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
ab->saved_v_ulpi = regulator_get_voltage(ab->v_ulpi);
if (ab->saved_v_ulpi < 0)
dev_err(ab->dev, "Failed to get v_ulpi voltage\n");
@@ -194,7 +206,7 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
if (ret)
dev_err(ab->dev, "Failed to enable vddulpivio18\n");
- if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
volt = regulator_get_voltage(ab->v_ulpi);
if ((volt != 1300000) && (volt != 1350000))
dev_err(ab->dev, "Vintcore is not set to 1.3V volt=%d\n",
@@ -215,7 +227,7 @@ static void ab8500_usb_regulator_disable(struct ab8500_usb *ab)
regulator_disable(ab->v_ulpi);
/* USB is not the only consumer of Vintcore, restore old settings */
- if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
if (ab->saved_v_ulpi > 0) {
ret = regulator_set_voltage(ab->v_ulpi,
ab->saved_v_ulpi, ab->saved_v_ulpi);
@@ -729,43 +741,52 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev,
int err;
int irq;
- irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS");
- if (irq < 0) {
- dev_err(&pdev->dev, "Link status irq not found\n");
- return irq;
- }
- err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
- ab8500_usb_link_status_irq,
- IRQF_NO_SUSPEND | IRQF_SHARED, "usb-link-status", ab);
- if (err < 0) {
- dev_err(ab->dev, "request_irq failed for link status irq\n");
- return err;
+ if (ab->flags & AB8500_USB_FLAG_USE_LINK_STATUS_IRQ) {
+ irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Link status irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_link_status_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED,
+ "usb-link-status", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for link status irq\n");
+ return err;
+ }
}
- irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
- if (irq < 0) {
- dev_err(&pdev->dev, "ID fall irq not found\n");
- return irq;
- }
- err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
- ab8500_usb_disconnect_irq,
- IRQF_NO_SUSPEND | IRQF_SHARED, "usb-id-fall", ab);
- if (err < 0) {
- dev_err(ab->dev, "request_irq failed for ID fall irq\n");
- return err;
+ if (ab->flags & AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ) {
+ irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "ID fall irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_disconnect_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED,
+ "usb-id-fall", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for ID fall irq\n");
+ return err;
+ }
}
- irq = platform_get_irq_byname(pdev, "VBUS_DET_F");
- if (irq < 0) {
- dev_err(&pdev->dev, "VBUS fall irq not found\n");
- return irq;
- }
- err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
- ab8500_usb_disconnect_irq,
- IRQF_NO_SUSPEND | IRQF_SHARED, "usb-vbus-fall", ab);
- if (err < 0) {
- dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
- return err;
+ if (ab->flags & AB8500_USB_FLAG_USE_VBUS_DET_IRQ) {
+ irq = platform_get_irq_byname(pdev, "VBUS_DET_F");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "VBUS fall irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_disconnect_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED,
+ "usb-vbus-fall", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
+ return err;
+ }
}
return 0;
@@ -888,6 +909,22 @@ static int ab8500_usb_probe(struct platform_device *pdev)
otg->set_host = ab8500_usb_set_host;
otg->set_peripheral = ab8500_usb_set_peripheral;
+ if (is_ab8500(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab8505(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ }
+
+ /* Disable regulator voltage setting for AB8500 <= v2.0 */
+ if (is_ab8500_2p0_or_earlier(ab->ab8500))
+ ab->flags &= ~AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+
platform_set_drvdata(pdev, ab);
ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier);
--
1.8.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists