| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1368684924-1560-1-git-send-email-b35083@freescale.com>
Date: Thu, 16 May 2013 14:15:24 +0800
From: Jingchang Lu <b35083@...escale.com>
To: <linux-kernel@...r.kernel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <john.stultz@...aro.org>,
<tglx@...utronix.de>, <shawn.guo@...aro.org>,
<s.hauer@...gutronix.de>, Jingchang Lu <b35083@...escale.com>
Subject: [PATCH v3] clocksource: add MVF600 pit timer support
Add Freescale Vybrid MVF600 period interrupt timer support.
Signed-off-by: Jingchang Lu <b35083@...escale.com>
---
v3:
move the pit driver to drivers/clocksource.
drivers/clocksource/Kconfig | 5 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/mvf600_pit_timer.c | 224 +++++++++++++++++++++++++++++++++
3 files changed, 230 insertions(+)
create mode 100644 drivers/clocksource/mvf600_pit_timer.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index f151c6c..2808a76 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -85,3 +85,8 @@ config CLKSRC_SAMSUNG_PWM
Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver
for all devicetree enabled platforms. This driver will be
needed only on systems that do not have the Exynos MCT available.
+
+config MVF600_PIT_TIMER
+ bool
+ help
+ Support for Period Interrupt Timer on Freescale Vybrid MVF600 SoC.
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 8d979c7..f471ca3 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_ARCH_BCM) += bcm_kona_timer.o
obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
+obj-$(CONFIG_MVF600_PIT_TIMER) += mvf600_pit_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
diff --git a/drivers/clocksource/mvf600_pit_timer.c b/drivers/clocksource/mvf600_pit_timer.c
new file mode 100644
index 0000000..74f7963
--- /dev/null
+++ b/drivers/clocksource/mvf600_pit_timer.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/sched_clock.h>
+
+/*
+ * 8 timers: pit0 - pit7,
+ * Each takes 0x10 Bytes register sapce
+ */
+#define PITMCR 0x00
+#define PIT0_OFFSET 0x100
+#define PITn_OFFSET(n) (PIT0_OFFSET + 0x10 * (n))
+#define PITLDVAL 0x00
+#define PITCVAL 0x04
+#define PITTCTRL 0x08
+#define PITTFLG 0x0c
+
+#define PITTCTRL_TEN (0x1 << 0)
+#define PITTCTRL_TIE (0x1 << 1)
+#define PITCTRL_CHN (0x1 << 2)
+
+#define PITTFLG_TIF 0x1
+
+static struct clock_event_device clockevent_pit;
+static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+static void __iomem *clksrc_base;
+static void __iomem *clkevt_base;
+static void __iomem *sched_clock_reg;
+static unsigned long pit_cycle_per_jiffy;
+
+static inline void pit_timer_enable(void)
+{
+ __raw_writel(PITTCTRL_TEN | PITTCTRL_TIE, clkevt_base + PITTCTRL);
+}
+
+static inline void pit_timer_disable(void)
+{
+ __raw_writel(0, clkevt_base + PITTCTRL);
+}
+
+static inline void pit_irq_disable(void)
+{
+ unsigned long val;
+
+ val = __raw_readl(clkevt_base + PITTCTRL);
+ val &= ~PITTCTRL_TIE;
+ __raw_writel(val, clkevt_base + PITTCTRL);
+}
+
+static inline void pit_irq_enable(void)
+{
+ unsigned long val;
+
+ val = __raw_readl(clkevt_base + PITTCTRL);
+ val |= PITTCTRL_TIE;
+ __raw_writel(val, clkevt_base + PITTCTRL);
+}
+
+static void pit_irq_acknowledge(void)
+{
+ __raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
+}
+
+static unsigned int pit_read_sched_clock(void)
+{
+ return __raw_readl(sched_clock_reg);
+}
+
+
+static int __init pit_clocksource_init(struct clk *pit_clk)
+{
+ unsigned int c = clk_get_rate(pit_clk);
+
+ sched_clock_reg = clksrc_base + PITCVAL;
+
+ setup_sched_clock(pit_read_sched_clock, 32, c);
+ return clocksource_mmio_init(clksrc_base + PITCVAL, "mvf600-pit", c,
+ 300, 32, clocksource_mmio_readl_down);
+}
+
+/* set clock event */
+static int pit_set_next_event(unsigned long delta,
+ struct clock_event_device *unused)
+{
+ pit_timer_disable();
+ __raw_writel(delta - 1, clkevt_base + PITLDVAL);
+ pit_irq_acknowledge();
+ pit_timer_enable();
+
+ return 0;
+}
+
+static void pit_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ pit_timer_disable();
+ pit_irq_acknowledge();
+
+ /* Remember timer mode */
+ clockevent_mode = mode;
+ local_irq_restore(flags);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+
+ __raw_writel(pit_cycle_per_jiffy - 1, clkevt_base + PITLDVAL);
+ pit_timer_enable();
+
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_RESUME:
+
+ break;
+ default:
+ WARN(1, "%s: unhandled event mode %d\n", __func__, mode);
+ break;
+ }
+}
+
+static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &clockevent_pit;
+
+ pit_irq_acknowledge();
+
+ if (clockevent_mode == CLOCK_EVT_MODE_ONESHOT)
+ pit_timer_disable();
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction pit_timer_irq = {
+ .name = "MVF600 pit timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = pit_timer_interrupt,
+};
+
+static struct clock_event_device clockevent_pit = {
+ .name = "MVF600 pit timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = pit_set_mode,
+ .set_next_event = pit_set_next_event,
+ .rating = 300,
+};
+
+static int __init pit_clockevent_init(struct clk *pit_clk)
+{
+ unsigned int c = clk_get_rate(pit_clk);
+
+ clockevent_pit.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&clockevent_pit, c, 0x100, 0xffffff00);
+
+ return 0;
+}
+
+static void __init pit_timer_init(struct device_node *np)
+{
+ struct clk *pit_clk;
+ void __iomem *timer_base;
+ int irq;
+
+ if (!np) {
+ pr_err("Failed to find MVF600 pit DT node\n");
+ BUG();
+ }
+
+ timer_base = of_iomap(np, 0);
+ WARN_ON(!timer_base);
+
+ /* choose PIT2 as clocksource, PIT3 as clockevent dev */
+ clksrc_base = timer_base + PITn_OFFSET(2);
+ clkevt_base = timer_base + PITn_OFFSET(3);
+
+ irq = irq_of_parse_and_map(np, 0);
+
+ pit_clk = of_clk_get(np, 0);
+ if (IS_ERR(pit_clk)) {
+ pr_err("Vybrid MVF600 pit timer: unable to get clk\n");
+ return;
+ }
+
+ clk_prepare_enable(pit_clk);
+
+ pit_cycle_per_jiffy = clk_get_rate(pit_clk)/(HZ);
+
+ __raw_writel(0x0, timer_base + PITMCR);
+
+ __raw_writel(0, clkevt_base + PITTCTRL);
+ __raw_writel(0xffffffff, clkevt_base + PITLDVAL);
+
+ __raw_writel(0, clksrc_base + PITTCTRL);
+ __raw_writel(0xffffffff, clksrc_base + PITLDVAL);
+ __raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL);
+
+ pit_clocksource_init(pit_clk);
+
+ setup_irq(irq, &pit_timer_irq);
+
+ pit_clockevent_init(pit_clk);
+}
+
+CLOCKSOURCE_OF_DECLARE(mvf600, "fsl,mvf600-pit", pit_timer_init);
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists