| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130516063546.GD14863@intel.com>
Date: Thu, 16 May 2013 12:05:46 +0530
From: Vinod Koul <vinod.koul@...el.com>
To: Lee Jones <lee.jones@...aro.org>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
balbi@...com, linux-usb@...r.kernel.org,
linux-crypto@...r.kernel.org, davem@...emloft.net,
herbert@...dor.hengli.com.au, arnd@...db.de,
linus.walleij@...ricsson.com, srinidhi.kasagar@...ricsson.com
Subject: Re: [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to
d40_phy_cfg()
On Wed, May 15, 2013 at 10:51:25AM +0100, Lee Jones wrote:
> All configuration left in d40_phy_cfg() is runtime configurable and
> there is already a call into it from d40_runtime_config(), so let's
> rely on that.
>
> Acked-by: Vinod Koul <vnod.koul@...el.com>
That needs up update!
> Acked-by: Arnd Bergmann <arnd@...db.de>
> Signed-off-by: Lee Jones <lee.jones@...aro.org>
> ---
> drivers/dma/ste_dma40.c | 14 +++---
> drivers/dma/ste_dma40_ll.c | 101 +++++++++++++++++++++-----------------------
> drivers/dma/ste_dma40_ll.h | 3 +-
> 3 files changed, 58 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
> index 759293e..b7fe46b 100644
> --- a/drivers/dma/ste_dma40.c
> +++ b/drivers/dma/ste_dma40.c
> @@ -2043,6 +2043,14 @@ static int d40_config_memcpy(struct d40_chan *d40c)
> } else if (dma_has_cap(DMA_MEMCPY, cap) &&
> dma_has_cap(DMA_SLAVE, cap)) {
> d40c->dma_cfg = dma40_memcpy_conf_phy;
> +
> + /* Generate interrrupt at end of transfer or relink. */
> + d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS);
> +
> + /* Generate interrupt on error. */
> + d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
> + d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
> +
> } else {
> chan_err(d40c, "No memcpy\n");
> return -EINVAL;
> @@ -2496,9 +2504,6 @@ static int d40_alloc_chan_resources(struct dma_chan *chan)
> }
>
> pm_runtime_get_sync(d40c->base->dev);
> - /* Fill in basic CFG register values */
> - d40_phy_cfg(&d40c->dma_cfg, &d40c->src_def_cfg,
> - &d40c->dst_def_cfg, chan_is_logical(d40c));
>
> d40_set_prio_realtime(d40c);
>
> @@ -2862,8 +2867,7 @@ static int d40_set_runtime_config(struct dma_chan *chan,
> if (chan_is_logical(d40c))
> d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
> else
> - d40_phy_cfg(cfg, &d40c->src_def_cfg,
> - &d40c->dst_def_cfg, false);
> + d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg);
>
> /* These settings will take precedence later */
> d40c->runtime_addr = config_addr;
> diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
> index 435a223..ab5a2a7 100644
> --- a/drivers/dma/ste_dma40_ll.c
> +++ b/drivers/dma/ste_dma40_ll.c
> @@ -50,63 +50,58 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg,
>
> }
>
> -/* Sets up SRC and DST CFG register for both logical and physical channels */
> -void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
> - u32 *src_cfg, u32 *dst_cfg, bool is_log)
> +void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
> {
> u32 src = 0;
> u32 dst = 0;
>
> - if (!is_log) {
> - /* Physical channel */
> - if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) ||
> - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> - /* Set master port to 1 */
> - src |= 1 << D40_SREG_CFG_MST_POS;
> - src |= D40_TYPE_TO_EVENT(cfg->dev_type);
> -
> - if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> - src |= 1 << D40_SREG_CFG_PHY_TM_POS;
> - else
> - src |= 3 << D40_SREG_CFG_PHY_TM_POS;
> - }
> - if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) ||
> - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> - /* Set master port to 1 */
> - dst |= 1 << D40_SREG_CFG_MST_POS;
> - dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
> -
> - if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> - dst |= 1 << D40_SREG_CFG_PHY_TM_POS;
> - else
> - dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
> - }
> - /* Interrupt on end of transfer for destination */
> - dst |= 1 << D40_SREG_CFG_TIM_POS;
> -
> - /* Generate interrupt on error */
> - src |= 1 << D40_SREG_CFG_EIM_POS;
> - dst |= 1 << D40_SREG_CFG_EIM_POS;
> -
> - /* PSIZE */
> - if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
> - src |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> - src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
> - }
> - if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
> - dst |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> - dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
> - }
> -
> - /* Element size */
> - src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS;
> - dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS;
> -
> - /* Set the priority bit to high for the physical channel */
> - if (cfg->high_priority) {
> - src |= 1 << D40_SREG_CFG_PRI_POS;
> - dst |= 1 << D40_SREG_CFG_PRI_POS;
> - }
> + if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) ||
> + (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> + /* Set master port to 1 */
> + src |= 1 << D40_SREG_CFG_MST_POS;
> + src |= D40_TYPE_TO_EVENT(cfg->dev_type);
> +
> + if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> + src |= 1 << D40_SREG_CFG_PHY_TM_POS;
> + else
> + src |= 3 << D40_SREG_CFG_PHY_TM_POS;
> + }
> + if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) ||
> + (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
> + /* Set master port to 1 */
> + dst |= 1 << D40_SREG_CFG_MST_POS;
> + dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
> +
> + if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
> + dst |= 1 << D40_SREG_CFG_PHY_TM_POS;
> + else
> + dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
> + }
> + /* Interrupt on end of transfer for destination */
> + dst |= 1 << D40_SREG_CFG_TIM_POS;
> +
> + /* Generate interrupt on error */
> + src |= 1 << D40_SREG_CFG_EIM_POS;
> + dst |= 1 << D40_SREG_CFG_EIM_POS;
> +
> + /* PSIZE */
> + if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
> + src |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> + src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
> + }
> + if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
> + dst |= 1 << D40_SREG_CFG_PHY_PEN_POS;
> + dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
> + }
> +
> + /* Element size */
> + src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS;
> + dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS;
> +
> + /* Set the priority bit to high for the physical channel */
> + if (cfg->high_priority) {
> + src |= 1 << D40_SREG_CFG_PRI_POS;
> + dst |= 1 << D40_SREG_CFG_PRI_POS;
> }
>
> if (cfg->src_info.big_endian)
> diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h
> index fdde8ef..1b47312 100644
> --- a/drivers/dma/ste_dma40_ll.h
> +++ b/drivers/dma/ste_dma40_ll.h
> @@ -432,8 +432,7 @@ enum d40_lli_flags {
>
> void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
> u32 *src_cfg,
> - u32 *dst_cfg,
> - bool is_log);
> + u32 *dst_cfg);
>
> void d40_log_cfg(struct stedma40_chan_cfg *cfg,
> u32 *lcsp1,
> --
> 1.7.10.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists