| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <51971046.3080201@samsung.com>
Date: Sat, 18 May 2013 14:23:18 +0900
From: jonghwa3.lee@...sung.com
To: Amit Daniel Kachhap <amit.daniel@...sung.com>
Cc: linux-pm@...r.kernel.org, Zhang Rui <rui.zhang@...el.com>,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
amit.kachhap@...il.com, Kukjin Kim <kgene.kim@...sung.com>,
Eduardo Valentin <eduardo.valentin@...com>
Subject: Re: [PATCH V4 22/30] thermal: exynos: Add support for exynos5440 TMU
sensor.
On 2013년 05월 14일 18:58, Amit Daniel Kachhap wrote:
> This patch modifies TMU controller to add changes needed to work with
> exynos5440 platform. This sensor registers 3 instance of the tmu controller
> with the thermal zone and hence reports 3 temperature output. This controller
> supports upto five trip points. For critical threshold the driver uses the
> core driver thermal framework for shutdown.
>
> Acked-by: Kukjin Kim <kgene.kim@...sung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@...sung.com>
> ---
> .../devicetree/bindings/thermal/exynos-thermal.txt | 28 ++++++++++++-
> drivers/thermal/samsung/exynos_tmu.c | 43 +++++++++++++++++--
> drivers/thermal/samsung/exynos_tmu.h | 6 +++
> drivers/thermal/samsung/exynos_tmu_data.h | 2 +
> 4 files changed, 72 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> index 535fd0e..970eeba 100644
> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> @@ -6,13 +6,16 @@
> "samsung,exynos4412-tmu"
> "samsung,exynos4210-tmu"
> "samsung,exynos5250-tmu"
> + "samsung,exynos5440-tmu"
> - interrupt-parent : The phandle for the interrupt controller
> -- reg : Address range of the thermal registers
> +- reg : Address range of the thermal registers. For exynos5440-tmu which has 3
> + instances of TMU, 2 set of register has to supplied. First set belongs
> + to each instance of TMU and second set belongs to common TMU registers.
> - interrupts : Should contain interrupt for thermal system
> - clocks : The main clock for TMU device
> - clock-names : Thermal system clock name
>
> -Example:
> +Example 1):
>
> tmu@...C0000 {
> compatible = "samsung,exynos4412-tmu";
> @@ -23,3 +26,24 @@ Example:
> clock-names = "tmu_apbif";
> status = "disabled";
> };
> +
> +Example 2):
> +
> + tmuctrl_0: tmuctrl@...118 {
> + compatible = "samsung,exynos5440-tmu";
> + reg = <0x160118 0x230>, <0x160368 0x10>;
> + interrupts = <0 58 0>;
> + clocks = <&clock 21>;
> + clock-names = "tmu_apbif";
> + };
> +
> +Note: For multi-instance tmu each instance should have an alias correctly
> +numbered in "aliases" node.
> +
> +Example:
> +
> +aliases {
> + tmuctrl0 = &tmuctrl_0;
> + tmuctrl1 = &tmuctrl_1;
> + tmuctrl2 = &tmuctrl_2;
> +};
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 7f7b1cf..7ca9c4d 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -185,9 +185,11 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
> reg->threshold_th0 + i * sizeof(reg->threshold_th0));
>
> writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
> - } else if (data->soc == SOC_ARCH_EXYNOS) {
> + } else if (data->soc == SOC_ARCH_EXYNOS ||
> + data->soc == SOC_ARCH_EXYNOS5440) {
> /* Write temperature code for rising and falling threshold */
> - for (i = 0; i < trigger_levs; i++) {
> + for (i = 0;
> + i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) {
> threshold_code = temp_to_code(data,
> pdata->trigger_levels[i]);
> if (threshold_code < 0) {
> @@ -218,7 +220,30 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
> writel((reg->inten_rise_mask << reg->inten_rise_shift) |
> (reg->inten_fall_mask << reg->inten_fall_shift),
> data->base + reg->tmu_intclear);
> +
> + /* if 5th threshold limit is also present, use TH2 register */
> + i = EXYNOS_MAX_TRIGGER_PER_REG;
> + if (pdata->trigger_levels[i]) {
> + threshold_code = temp_to_code(data,
> + pdata->trigger_levels[i]);
> + if (threshold_code < 0) {
> + ret = threshold_code;
> + goto out;
> + }
> + rising_threshold =
> + threshold_code << reg->threshold_th3_l0_shift;
> + writel(rising_threshold,
> + data->base + reg->threshold_th2);
> + if (pdata->trigger_type[i] == HW_TRIP) {
> + con = readl(data->base + reg->tmu_ctrl);
> + con |= (1 << reg->therm_trip_en_shift);
> + writel(con, data->base + reg->tmu_ctrl);
> + }
> + }
> }
> + /*Clear the PMIN in the common TMU register*/
> + if (reg->tmu_pmin && !data->id)
> + writel(0, data->base_common + reg->tmu_pmin);
> out:
> clk_disable(data->clk);
> mutex_unlock(&data->lock);
> @@ -345,7 +370,14 @@ static void exynos_tmu_work(struct work_struct *work)
> struct exynos_tmu_data, irq_work);
> struct exynos_tmu_platform_data *pdata = data->pdata;
> const struct exynos_tmu_registers *reg = pdata->registers;
> - unsigned int val_irq;
> + unsigned int val_irq, val_type;
> +
> + /* Find which sensor generated this interrupt */
> + if (reg->tmu_irqstatus) {
> + val_type = readl(data->base_common + reg->tmu_irqstatus);
> + if (!((val_type >> data->id) & 0x1))
> + goto out;
I have a question about your implementation for supporting EXYNOS5440.
I don't know exactly how EXYNO5440's tmu is working, but just guess it would be
similar with other EXYNOS series's without number of thermal sensors. (exclusive
register map and threshold level). Due to the multiple number of thermal sensor
in EXYNOS5440, it have multiple thermal zone devices and that's why it just
leave interrupt pin in pending if interrupt is not its, right?
So, my curious is, why we make all platform devices for each of thermal zone
devices? Why don't you just handle all thermal zone devices with one platform
device?
Yes, It's probably right to make multiple devices node to support them, because
it has different physical hardware(sensors). But we have one TMU , don't we?
(Maybe my assumption is wrong, I assume that it has one TMU because it looks
like it has only one irq line.). If I'm right, I think it is better to manage
all thermal zone devices with one platform device. Then, we don't need to leave
irq handler with leaving it pendded like above and also we may not need other
your patches like adding base_common iomem variable.
I'd like to listen your opinion about this.
Thanks,
Jonghwa
> + }
>
> exynos_report_trigger(data->reg_conf);
> mutex_lock(&data->lock);
> @@ -358,7 +390,7 @@ static void exynos_tmu_work(struct work_struct *work)
>
> clk_disable(data->clk);
> mutex_unlock(&data->lock);
> -
> +out:
> enable_irq(data->irq);
> }
>
> @@ -520,7 +552,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
> return ret;
>
> if (pdata->type == SOC_ARCH_EXYNOS ||
> - pdata->type == SOC_ARCH_EXYNOS4210)
> + pdata->type == SOC_ARCH_EXYNOS4210 ||
> + pdata->type == SOC_ARCH_EXYNOS5440)
> data->soc = pdata->type;
> else {
> ret = -EINVAL;
> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
> index 65443d7..9151a30 100644
> --- a/drivers/thermal/samsung/exynos_tmu.h
> +++ b/drivers/thermal/samsung/exynos_tmu.h
> @@ -44,6 +44,7 @@ enum trigger_type {
> enum soc_type {
> SOC_ARCH_EXYNOS4210 = 1,
> SOC_ARCH_EXYNOS,
> + SOC_ARCH_EXYNOS5440,
> };
>
> /**
> @@ -132,6 +133,8 @@ enum soc_type {
> * @emul_temp_shift: shift bits of emulation temperature.
> * @emul_time_shift: shift bits of emulation time.
> * @emul_time_mask: mask bits of emulation time.
> + * @tmu_irqstatus: register to find which TMU generated interrupts.
> + * @tmu_pmin: register to get/set the Pmin value.
> */
> struct exynos_tmu_registers {
> u32 triminfo_data;
> @@ -199,6 +202,9 @@ struct exynos_tmu_registers {
> u32 emul_temp_shift;
> u32 emul_time_shift;
> u32 emul_time_mask;
> +
> + u32 tmu_irqstatus;
> + u32 tmu_pmin;
> };
>
> /**
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
> index 0e2244f..4acf070 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> @@ -91,6 +91,8 @@
> #define EXYNOS_EMUL_DATA_MASK 0xFF
> #define EXYNOS_EMUL_ENABLE 0x1
>
> +#define EXYNOS_MAX_TRIGGER_PER_REG 4
> +
> #if defined(CONFIG_CPU_EXYNOS4210)
> extern struct exynos_tmu_platform_data const exynos4210_default_tmu_data;
> #define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists