| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20130521134935.d18c3f5c23485fb5ddabc365@canb.auug.org.au>
Date: Tue, 21 May 2013 13:49:35 +1000
From: Stephen Rothwell <sfr@...b.auug.org.au>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-arch@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>,
Doug Thompson <dougthompson@...ssion.com>,
linux-edac@...r.kernel.org, Bjorn Helgaas <bhelgaas@...gle.com>,
linux-pci@...r.kernel.org, linux-pcmcia@...ts.infradead.org,
Hans Verkuil <hans.verkuil@...co.com>,
Steven Whitehouse <swhiteho@...hat.com>,
cluster-devel@...hat.com, Arnd Bergmann <arnd@...db.de>,
Pavel Machek <pavel@....cz>, "Rafael J. Wysocki" <rjw@...k.pl>,
linux-pm@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>, linux-mm@...ck.org,
Russell King <linux@....linux.org.uk>,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH] Finally eradicate CONFIG_HOTPLUG
Ever since commit 45f035ab9b8f ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off. Remove all the remaining references to it.
Cc: linux-arch@...r.kernel.org
Cc: Russell King <linux@....linux.org.uk>
Cc: linux-arm-kernel@...ts.infradead.org
Cc: Doug Thompson <dougthompson@...ssion.com>
Cc: linux-edac@...r.kernel.org
Cc: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: linux-pci@...r.kernel.org
Cc: linux-pcmcia@...ts.infradead.org
Cc: Hans Verkuil <hans.verkuil@...co.com>
Cc: Steven Whitehouse <swhiteho@...hat.com>
Cc: cluster-devel@...hat.com
Cc: Arnd Bergmann <arnd@...db.de>
Cc: Pavel Machek <pavel@....cz>
Cc: "Rafael J. Wysocki" <rjw@...k.pl>
Cc: linux-pm@...r.kernel.org
Cc: Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-mm@...ck.org
Signed-off-by: Stephen Rothwell <sfr@...b.auug.org.au>
---
Documentation/ABI/testing/sysfs-bus-pci | 5 +----
Documentation/SubmitChecklist | 2 +-
Documentation/cpu-hotplug.txt | 2 +-
Documentation/hwmon/submitting-patches | 3 +--
Documentation/kbuild/kconfig.txt | 2 +-
Documentation/usb/hotplug.txt | 6 +++---
arch/arm/Kconfig | 2 +-
arch/arm/kernel/module.c | 8 --------
arch/arm/kernel/vmlinux.lds.S | 4 ----
arch/arm/mach-ixp4xx/Kconfig | 1 -
arch/blackfin/Kconfig | 2 +-
arch/cris/arch-v32/drivers/Kconfig | 1 -
arch/ia64/Kconfig | 1 -
arch/mips/Kconfig | 2 +-
arch/parisc/Kconfig | 1 -
arch/powerpc/Kconfig | 2 +-
arch/powerpc/mm/tlb_hash64.c | 4 ++--
arch/s390/Kconfig | 1 -
arch/sh/Kconfig | 2 +-
arch/sparc/Kconfig | 1 -
arch/x86/Kconfig | 2 +-
drivers/base/Kconfig | 2 --
drivers/char/pcmcia/Kconfig | 2 +-
drivers/edac/Kconfig | 2 +-
drivers/pci/Kconfig | 2 --
drivers/pci/hotplug/Kconfig | 2 +-
drivers/pcmcia/Kconfig | 1 -
drivers/staging/media/go7007/go7007.txt | 1 -
fs/gfs2/Kconfig | 5 ++---
include/asm-generic/vmlinux.lds.h | 20 --------------------
init/Kconfig | 3 ---
kernel/power/Kconfig | 1 -
mm/Kconfig | 2 +-
33 files changed, 22 insertions(+), 75 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 1ce5ae3..5210a51 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -64,7 +64,6 @@ Description:
Writing a non-zero value to this attribute will
force a rescan of all PCI buses in the system, and
re-discover previously removed devices.
- Depends on CONFIG_HOTPLUG.
What: /sys/bus/pci/devices/.../msi_irqs/
Date: September, 2011
@@ -90,7 +89,6 @@ Contact: Linux PCI developers <linux-pci@...r.kernel.org>
Description:
Writing a non-zero value to this attribute will
hot-remove the PCI device and any of its children.
- Depends on CONFIG_HOTPLUG.
What: /sys/bus/pci/devices/.../pci_bus/.../rescan
Date: May 2011
@@ -99,7 +97,7 @@ Description:
Writing a non-zero value to this attribute will
force a rescan of the bus and all child buses,
and re-discover devices removed earlier from this
- part of the device tree. Depends on CONFIG_HOTPLUG.
+ part of the device tree.
What: /sys/bus/pci/devices/.../rescan
Date: January 2009
@@ -109,7 +107,6 @@ Description:
force a rescan of the device's parent bus and all
child buses, and re-discover devices removed earlier
from this part of the device tree.
- Depends on CONFIG_HOTPLUG.
What: /sys/bus/pci/devices/.../reset
Date: July 2009
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index dc0e332..2b7e32d 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -105,5 +105,5 @@ kernel patches.
same time, just various/random combinations of them]:
CONFIG_SMP, CONFIG_SYSFS, CONFIG_PROC_FS, CONFIG_INPUT, CONFIG_PCI,
- CONFIG_BLOCK, CONFIG_PM, CONFIG_HOTPLUG, CONFIG_MAGIC_SYSRQ,
+ CONFIG_BLOCK, CONFIG_PM, CONFIG_MAGIC_SYSRQ,
CONFIG_NET, CONFIG_INET=n (but latter with CONFIG_NET=y)
diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt
index 9f40135..0efd1b9 100644
--- a/Documentation/cpu-hotplug.txt
+++ b/Documentation/cpu-hotplug.txt
@@ -128,7 +128,7 @@ A: When doing make defconfig, Enable CPU hotplug support
"Processor type and Features" -> Support for Hotpluggable CPUs
-Make sure that you have CONFIG_HOTPLUG, and CONFIG_SMP turned on as well.
+Make sure that you have CONFIG_SMP turned on as well.
You would need to enable CONFIG_HOTPLUG_CPU for SMP suspend/resume support
as well.
diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches
index 843751c..4628646 100644
--- a/Documentation/hwmon/submitting-patches
+++ b/Documentation/hwmon/submitting-patches
@@ -27,8 +27,7 @@ increase the chances of your change being accepted.
explicitly below the patch header.
* If your patch (or the driver) is affected by configuration options such as
- CONFIG_SMP or CONFIG_HOTPLUG, make sure it compiles for all configuration
- variants.
+ CONFIG_SMP, make sure it compiles for all configuration variants.
2. Adding functionality to existing drivers
diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt
index 3f429ed..213859e 100644
--- a/Documentation/kbuild/kconfig.txt
+++ b/Documentation/kbuild/kconfig.txt
@@ -165,7 +165,7 @@ Searching in menuconfig:
Example:
/hotplug
This lists all config symbols that contain "hotplug",
- e.g., HOTPLUG, HOTPLUG_CPU, MEMORY_HOTPLUG.
+ e.g., HOTPLUG_CPU, MEMORY_HOTPLUG.
For search help, enter / followed TAB-TAB-TAB (to highlight
<Help>) and Enter. This will tell you that you can also use
diff --git a/Documentation/usb/hotplug.txt b/Documentation/usb/hotplug.txt
index 4c94571..6424b13 100644
--- a/Documentation/usb/hotplug.txt
+++ b/Documentation/usb/hotplug.txt
@@ -33,9 +33,9 @@ you get the best hotplugging when you configure a highly modular system.
KERNEL HOTPLUG HELPER (/sbin/hotplug)
-When you compile with CONFIG_HOTPLUG, you get a new kernel parameter:
-/proc/sys/kernel/hotplug, which normally holds the pathname "/sbin/hotplug".
-That parameter names a program which the kernel may invoke at various times.
+There is a kernel parameter: /proc/sys/kernel/hotplug, which normally
+holds the pathname "/sbin/hotplug". That parameter names a program
+which the kernel may invoke at various times.
The /sbin/hotplug program can be invoked by any subsystem as part of its
reaction to a configuration change, from a thread in that subsystem.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d423d58..b30db02 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1527,7 +1527,7 @@ config NR_CPUS
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
- depends on SMP && HOTPLUG
+ depends on SMP
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 1e9be5d..85c3fb6 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -288,24 +288,16 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
if (strcmp(".ARM.exidx.init.text", secname) == 0)
maps[ARM_SEC_INIT].unw_sec = s;
- else if (strcmp(".ARM.exidx.devinit.text", secname) == 0)
- maps[ARM_SEC_DEVINIT].unw_sec = s;
else if (strcmp(".ARM.exidx", secname) == 0)
maps[ARM_SEC_CORE].unw_sec = s;
else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
maps[ARM_SEC_EXIT].unw_sec = s;
- else if (strcmp(".ARM.exidx.devexit.text", secname) == 0)
- maps[ARM_SEC_DEVEXIT].unw_sec = s;
else if (strcmp(".init.text", secname) == 0)
maps[ARM_SEC_INIT].txt_sec = s;
- else if (strcmp(".devinit.text", secname) == 0)
- maps[ARM_SEC_DEVINIT].txt_sec = s;
else if (strcmp(".text", secname) == 0)
maps[ARM_SEC_CORE].txt_sec = s;
else if (strcmp(".exit.text", secname) == 0)
maps[ARM_SEC_EXIT].txt_sec = s;
- else if (strcmp(".devexit.text", secname) == 0)
- maps[ARM_SEC_DEVEXIT].txt_sec = s;
}
for (i = 0; i < ARM_SEC_MAX; i++)
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index a871b8e..fa25e4e 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -70,10 +70,6 @@ SECTIONS
ARM_EXIT_DISCARD(EXIT_TEXT)
ARM_EXIT_DISCARD(EXIT_DATA)
EXIT_CALL
-#ifndef CONFIG_HOTPLUG
- *(.ARM.exidx.devexit.text)
- *(.ARM.extab.devexit.text)
-#endif
#ifndef CONFIG_MMU
*(.fixup)
*(__ex_table)
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 73a2d90..30e1ebe 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -235,7 +235,6 @@ config IXP4XX_QMGR
config IXP4XX_NPE
tristate "IXP4xx Network Processor Engine support"
select FW_LOADER
- select HOTPLUG
help
This driver supports IXP4xx built-in network coprocessors
and is automatically selected by Ethernet and HSS drivers.
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index a117652..b573827 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -253,7 +253,7 @@ config NR_CPUS
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
- depends on SMP && HOTPLUG
+ depends on SMP
default y
config BF_REV_MIN
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index c55971a..ab725ed 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -617,7 +617,6 @@ config ETRAX_PV_CHANGEABLE_BITS
config ETRAX_CARDBUS
bool "Cardbus support"
depends on ETRAX_ARCH_V32
- select HOTPLUG
help
Enabled the ETRAX Cardbus driver.
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 1a2b774..5a768ad 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -376,7 +376,6 @@ config NR_CPUS
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SMP
- select HOTPLUG
default n
---help---
Say Y here to experiment with turning CPUs off and on. CPUs
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7a58ab9..e433b90 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -962,7 +962,7 @@ config SYS_HAS_EARLY_PRINTK
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
- depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU
+ depends on SMP && SYS_SUPPORTS_HOTPLUG_CPU
help
Say Y here to allow turning CPUs off and on. CPUs can be
controlled through /sys/devices/system/cpu.
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index cad060f..6d0969a 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -254,7 +254,6 @@ config IRQSTACKS
config HOTPLUG_CPU
bool
default y if SMP
- select HOTPLUG
config ARCH_SELECT_MEMORY_MODEL
def_bool y
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c33e3ad..508e3fe 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -341,7 +341,7 @@ config SWIOTLB
config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
- depends on SMP && HOTPLUG && (PPC_PSERIES || \
+ depends on SMP && (PPC_PSERIES || \
PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
---help---
Say Y here to be able to disable and re-enable individual
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 023ec8a..7df1c5e 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -183,8 +183,8 @@ void tlb_flush(struct mmu_gather *tlb)
* since 64K pages may overlap with other bridges when using 64K pages
* with 4K HW pages on IO space.
*
- * Because of that usage pattern, it's only available with CONFIG_HOTPLUG
- * and is implemented for small size rather than speed.
+ * Because of that usage pattern, it is implemented for small size rather
+ * than speed.
*/
void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
unsigned long end)
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2c9789d..d97868b 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -302,7 +302,6 @@ config HOTPLUG_CPU
def_bool y
prompt "Support for hot-pluggable CPUs"
depends on SMP
- select HOTPLUG
help
Say Y here to be able to turn CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu/cpu#.
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8c868cf..1020dd8 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -748,7 +748,7 @@ config NR_CPUS
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP && HOTPLUG
+ depends on SMP
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 9ac9f16..a00cbd3 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -243,7 +243,6 @@ config SECCOMP
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SPARC64 && SMP
- select HOTPLUG
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu/cpu#.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6a154a9..770cf04 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1726,7 +1726,7 @@ config PHYSICAL_ALIGN
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
- depends on SMP && HOTPLUG
+ depends on SMP
---help---
Say Y here to allow turning CPUs off and on. CPUs can be
controlled through /sys/devices/system/cpu.
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 07abd9d..5daa259 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -2,7 +2,6 @@ menu "Generic Driver Options"
config UEVENT_HELPER_PATH
string "path to uevent helper"
- depends on HOTPLUG
default ""
help
Path to uevent helper program forked by the kernel for
@@ -23,7 +22,6 @@ config UEVENT_HELPER_PATH
config DEVTMPFS
bool "Maintain a devtmpfs filesystem to mount at /dev"
- depends on HOTPLUG
help
This creates a tmpfs/ramfs filesystem instance early at bootup.
In this filesystem, the kernel driver core maintains device
diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
index 2a166d5..b27f534 100644
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@@ -3,7 +3,7 @@
#
menu "PCMCIA character devices"
- depends on HOTPLUG && PCMCIA!=n
+ depends on PCMCIA!=n
config SYNCLINK_CS
tristate "SyncLink PC Card support"
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index e443f2c1..a697a64 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -145,7 +145,7 @@ config EDAC_E7XXX
config EDAC_E752X
tristate "Intel e752x (e7520, e7525, e7320) and 3100"
- depends on EDAC_MM_EDAC && PCI && X86 && HOTPLUG
+ depends on EDAC_MM_EDAC && PCI && X86
help
Support for error detection and correction on the Intel
E7520, E7525, E7320 server chipsets.
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 6d51aa6..77497f1 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -55,7 +55,6 @@ config PCI_STUB
config XEN_PCIDEV_FRONTEND
tristate "Xen PCI Frontend"
depends on PCI && X86 && XEN
- select HOTPLUG
select PCI_XEN
select XEN_XENBUS_FRONTEND
default y
@@ -113,7 +112,6 @@ config PCI_IOAPIC
tristate "PCI IO-APIC hotplug support" if X86
depends on PCI
depends on ACPI
- depends on HOTPLUG
default !X86
config PCI_LABEL
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 9fcb87f..bb7ebb2 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -4,7 +4,7 @@
menuconfig HOTPLUG_PCI
tristate "Support for PCI Hotplug"
- depends on PCI && HOTPLUG && SYSFS
+ depends on PCI && SYSFS
---help---
Say Y here if you have a motherboard with a PCI Hotplug controller.
This allows you to add and remove PCI cards while the machine is
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index b90f85b..1c63624 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -4,7 +4,6 @@
menuconfig PCCARD
tristate "PCCard (PCMCIA/CardBus) support"
- depends on HOTPLUG
---help---
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
diff --git a/drivers/staging/media/go7007/go7007.txt b/drivers/staging/media/go7007/go7007.txt
index fcb3e23..dc0026c 100644
--- a/drivers/staging/media/go7007/go7007.txt
+++ b/drivers/staging/media/go7007/go7007.txt
@@ -78,7 +78,6 @@ All vendor-built kernels should already be configured properly. However,
for custom-built kernels, the following options need to be enabled in the
kernel as built-in or modules:
- CONFIG_HOTPLUG - Support for hot-pluggable devices
CONFIG_MODULES - Enable loadable module support
CONFIG_KMOD - Automatic kernel module loading
CONFIG_FW_LOADER - Hotplug firmware loading support
diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig
index eb08c9e..432ea56 100644
--- a/fs/gfs2/Kconfig
+++ b/fs/gfs2/Kconfig
@@ -20,13 +20,12 @@ config GFS2_FS
be found here: http://sources.redhat.com/cluster
The "nolock" lock module is now built in to GFS2 by default. If
- you want to use the DLM, be sure to enable HOTPLUG and IPv4/6
- networking.
+ you want to use the DLM, be sure to enable IPv4/6 networking.
config GFS2_FS_LOCKING_DLM
bool "GFS2 DLM locking"
depends on (GFS2_FS!=n) && NET && INET && (IPV6 || IPV6=n) && \
- HOTPLUG && DLM && CONFIGFS_FS && SYSFS
+ DLM && CONFIGFS_FS && SYSFS
help
Multiple node locking module for GFS2
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index eb58d2d..4f27372 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -68,14 +68,6 @@
* are handled as text/data or they can be discarded (which
* often happens at runtime)
*/
-#ifdef CONFIG_HOTPLUG
-#define DEV_KEEP(sec) *(.dev##sec)
-#define DEV_DISCARD(sec)
-#else
-#define DEV_KEEP(sec)
-#define DEV_DISCARD(sec) *(.dev##sec)
-#endif
-
#ifdef CONFIG_HOTPLUG_CPU
#define CPU_KEEP(sec) *(.cpu##sec)
#define CPU_DISCARD(sec)
@@ -182,8 +174,6 @@
*(.data) \
*(.ref.data) \
*(.data..shared_aligned) /* percpu related */ \
- DEV_KEEP(init.data) \
- DEV_KEEP(exit.data) \
CPU_KEEP(init.data) \
CPU_KEEP(exit.data) \
MEM_KEEP(init.data) \
@@ -372,8 +362,6 @@
/* __*init sections */ \
__init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) { \
*(.ref.rodata) \
- DEV_KEEP(init.rodata) \
- DEV_KEEP(exit.rodata) \
CPU_KEEP(init.rodata) \
CPU_KEEP(exit.rodata) \
MEM_KEEP(init.rodata) \
@@ -416,8 +404,6 @@
*(.text.hot) \
*(.text) \
*(.ref.text) \
- DEV_KEEP(init.text) \
- DEV_KEEP(exit.text) \
CPU_KEEP(init.text) \
CPU_KEEP(exit.text) \
MEM_KEEP(init.text) \
@@ -503,7 +489,6 @@
/* init and exit section handling */
#define INIT_DATA \
*(.init.data) \
- DEV_DISCARD(init.data) \
CPU_DISCARD(init.data) \
MEM_DISCARD(init.data) \
KERNEL_CTORS() \
@@ -511,7 +496,6 @@
*(.init.rodata) \
FTRACE_EVENTS() \
TRACE_SYSCALLS() \
- DEV_DISCARD(init.rodata) \
CPU_DISCARD(init.rodata) \
MEM_DISCARD(init.rodata) \
CLK_OF_TABLES() \
@@ -521,14 +505,11 @@
#define INIT_TEXT \
*(.init.text) \
- DEV_DISCARD(init.text) \
CPU_DISCARD(init.text) \
MEM_DISCARD(init.text)
#define EXIT_DATA \
*(.exit.data) \
- DEV_DISCARD(exit.data) \
- DEV_DISCARD(exit.rodata) \
CPU_DISCARD(exit.data) \
CPU_DISCARD(exit.rodata) \
MEM_DISCARD(exit.data) \
@@ -536,7 +517,6 @@
#define EXIT_TEXT \
*(.exit.text) \
- DEV_DISCARD(exit.text) \
CPU_DISCARD(exit.text) \
MEM_DISCARD(exit.text)
diff --git a/init/Kconfig b/init/Kconfig
index 9d3a788..a5e0917 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1244,9 +1244,6 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
the unaligned access emulation.
see arch/parisc/kernel/unaligned.c for reference
-config HOTPLUG
- def_bool y
-
config HAVE_PCSPKR_PLATFORM
bool
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 5dfdc9e..9c39de0 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -100,7 +100,6 @@ config PM_SLEEP_SMP
depends on SMP
depends on ARCH_SUSPEND_POSSIBLE || ARCH_HIBERNATION_POSSIBLE
depends on PM_SLEEP
- select HOTPLUG
select HOTPLUG_CPU
config PM_AUTOSLEEP
diff --git a/mm/Kconfig b/mm/Kconfig
index e742d06..f5e698e 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -173,7 +173,7 @@ config HAVE_BOOTMEM_INFO_NODE
config MEMORY_HOTPLUG
bool "Allow for memory hot-add"
depends on SPARSEMEM || X86_64_ACPI_NUMA
- depends on HOTPLUG && ARCH_ENABLE_MEMORY_HOTPLUG
+ depends on ARCH_ENABLE_MEMORY_HOTPLUG
depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390)
config MEMORY_HOTPLUG_SPARSE
--
1.8.1
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists