[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20130524170214.GA30179@sgi.com>
Date: Fri, 24 May 2013 12:02:15 -0500
From: Russ Anderson <rja@....com>
To: Robin Holt <holt@....com>
Cc: Matt Fleming <matt@...sole-pimps.org>,
Matthew Garrett <matthew.garrett@...ula.com>,
matt.fleming@...el.com, linux-efi@...r.kernel.org, x86@...nel.org,
linux-kernel@...r.kernel.org, Ingo Molnar <mingo@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...ux.intel.com>,
Borislav Petkov <bp@...en8.de>
Subject: Re: [regression, bisected] x86: efi: Pass boot services variable
info to runtime code
On Fri, May 24, 2013 at 11:11:11AM -0500, Robin Holt wrote:
> Russ,
>
> Can we open a bug for the BIOS folks and see if we can get this addressed?
I already talked with them. It is not in an area that we
normally change, so if there is a bug may be in the Intel
reference code. More investigation is needed to track down
the actual problem, and that could take help from Intel.
Regardless of that, it is a kernel patch that triggers the
problem. This isn't the first time a kernel change does
the "right thing" but trips across questionable bios/EFI/bootloader
implementation. That still makes it a kernel bug.
I'm still digging to better understand the root problem.
> Robin
>
> On Fri, May 24, 2013 at 08:43:31AM +0100, Matt Fleming wrote:
> > On Thu, 23 May, at 03:32:34PM, Russ Anderson wrote:
> > > efi: mem127: type=4, attr=0xf, range=[0x000000006bb22000-0x000000007ca9c000) (271MB)
> >
> > EFI_BOOT_SERVICES_CODE
> >
> > > efi: mem133: type=5, attr=0x800000000000000f, range=[0x000000007daff000-0x000000007dbff000) (1MB)
> >
> > EFI_RUNTIME_SERVICES_CODE
> >
> > > EFI Variables Facility v0.08 2004-May-17
> > > BUG: unable to handle kernel paging request at 000000007ca95b10
> > > IP: [<ffff88007dbf2140>] 0xffff88007dbf213f
> >
> > This...
> >
> > > Call Trace:
> > > [<ffffffff81139a34>] ? __alloc_pages_nodemask+0x154/0x2f0
> > > [<ffffffff81174f7d>] ? alloc_page_interleave+0x9d/0xa0
> > > [<ffffffff812fe192>] ? put_dec+0x72/0x90
> > > [<ffffffff812f6d53>] ? ida_get_new_above+0xb3/0x220
> > > [<ffffffff812f6174>] ? sub_alloc+0x74/0x1d0
> > > [<ffffffff812f6174>] ? sub_alloc+0x74/0x1d0
> > > [<ffffffff812f6d53>] ? ida_get_new_above+0xb3/0x220
> > > [<ffffffff814c8cc0>] ? create_efivars_bin_attributes+0x150/0x150
> >
> > is junk on the stack.
> >
> > > [<ffffffff810499b3>] ? efi_call3+0x43/0x80
> > > [<ffffffff810492a7>] ? virt_efi_get_next_variable+0x47/0x1c0
> > > [<ffffffff814c8cc0>] ? create_efivars_bin_attributes+0x150/0x150
> > > [<ffffffff814c7b55>] ? efivar_init+0xd5/0x390
> > > [<ffffffff814c8ae0>] ? efivar_update_sysfs_entries+0x90/0x90
> > > [<ffffffff812f906b>] ? kobject_uevent+0xb/0x10
> > > [<ffffffff812f812b>] ? kset_register+0x5b/0x70
> > > [<ffffffff814c8cc0>] ? create_efivars_bin_attributes+0x150/0x150
> > > [<ffffffff814c8d47>] ? efivars_sysfs_init+0x87/0xf0
> > > [<ffffffff8100032a>] ? do_one_initcall+0x15a/0x1b0
> > > [<ffffffff81a17831>] ? do_basic_setup+0xad/0xce
> > > [<ffffffff81a17ae3>] ? kernel_init_freeable+0x291/0x291
> > > [<ffffffff81a3708a>] ? sched_init_smp+0x15b/0x162
> > > [<ffffffff81a17a5f>] ? kernel_init_freeable+0x20d/0x291
> > > [<ffffffff81601eb0>] ? rest_init+0x80/0x80
> > > [<ffffffff81601ebe>] ? kernel_init+0xe/0x180
> > > [<ffffffff8162179c>] ? ret_from_fork+0x7c/0xb0
> > > [<ffffffff81601eb0>] ? rest_init+0x80/0x80
> >
> > Here's the real call stack leading up to the crash.
> >
> > What appears to be happening is that your the EFI runtime services code
> > is calling into the EFI boot services code, which is definitely a bug in
> > your firmware because we're at runtime, but we've seen other machines
> > that do similar things so we usually handle it just fine. However, what
> > makes your case different, and the reason you see the above splat, is
> > that it's using the physical address of the EFI boot services region,
> > not the virtual one we setup with SetVirtualAddressMap(). Which is a
> > second firmware bug. Again, we have seen other machines that access
> > physical addresses after SetVirtualAddressMap(), but until now we
> > haven't had any non-optional code that triggered them.
> >
> > The only reason I can see that the offending commit would introduce this
> > problem is because it calls QueryVariableInfo() at boot time. I notice
> > that your machine is an SGI UV one, is there any chance you could get a
> > firmware fix for this? If possible, it would be also good to confirm
> > that it's this chunk of code in setup_efi_vars(),
> >
> > status = efi_call_phys4(sys_table->runtime->query_variable_info,
> > EFI_VARIABLE_NON_VOLATILE |
> > EFI_VARIABLE_BOOTSERVICE_ACCESS |
> > EFI_VARIABLE_RUNTIME_ACCESS, &store_size,
> > &remaining_size, &var_size);
> >
> > that later makes GetNextVariable() jump to the physical address of the
> > EFI Boot Services region. Because if not, we need to do some more
> > digging.
> >
> > Borislav, how are your 1:1 mapping patches coming along? In theory, once
> > those are merged we can gracefully workaround these kinds of issues.
> >
> > --
> > Matt Fleming, Intel Open Source Technology Center
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@...r.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
--
Russ Anderson, OS RAS/Partitioning Project Lead
SGI - Silicon Graphics Inc rja@....com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists