linux-kernel - [PATCH] usb: xhci: Disable runtime PM suspend for quirky controllers.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1369419177-23281-1-git-send-email-shawnn@chromium.org>
Date:	Fri, 24 May 2013 11:12:57 -0700
From:	Shawn Nematbakhsh <shawnn@...omium.org>
To:	linux-usb@...r.kernel.org
Cc:	Sarah Sharp <sarah.a.sharp@...ux.intel.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	linux-kernel@...r.kernel.org, Julius Werner <jwerner@...omium.org>,
	Shawn Nematbakhsh <shawnn@...omium.org>
Subject: [PATCH] usb: xhci: Disable runtime PM suspend for quirky controllers.

If a USB controller with XHCI_RESET_ON_RESUME goes to runtime suspend,
a reset will be performed upon runtime resume. Any previously suspended
devices attached to the controller will be re-enumerated at this time.
This will cause problems, for example, if an open system call on the
device triggered the resume (the open call will fail).

Note that this change is only relevant when persist_enabled is not set
for USB devices.

Signed-off-by: Shawn Nematbakhsh <shawnn@...omium.org>
---
 drivers/usb/host/xhci.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b4aa79d..7455156 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4687,6 +4687,12 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
 
 	get_quirks(dev, xhci);
 
+	/* If we are resetting upon resume, we must disable runtime PM.
+	 * Otherwise, an open() syscall to a device on our runtime suspended
+	 * controller will trigger controller reset and device re-enumeration */
+	if (xhci->quirks & XHCI_RESET_ON_RESUME)
+		pm_runtime_get_noresume(dev);
+
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
 	if (retval)
-- 
1.7.12.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/