[ 0.000000] Linux version 3.10.0-rc3-00087-g1e2448e (kbuild@xian) (gcc version 4.7.2 (Debian 4.7.2-4) ) #72 Tue May 28 03:37:53 CST 2013 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] UMC UMC UMC UMC [ 0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init. [ 0.000000] CPU: Your system may be unstable. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000093bff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000093c00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x100000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdab0-0x000fdabf] mapped at [400fdab0] [ 0.000000] mpc: fdac0-fdbec [ 0.000000] initial memory mapped: [mem 0x00000000-0x033fffff] [ 0.000000] Base memory trampoline at [4008f000] 8f000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x0e000000-0x0e3fffff] [ 0.000000] [mem 0x0e000000-0x0e3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x08000000-0x0dffffff] [ 0.000000] [mem 0x08000000-0x0dffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x07ffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x07ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0e400000-0x0fffdfff] [ 0.000000] [mem 0x0e400000-0x0fbfffff] page 2M [ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k [ 0.000000] BRK [0x02de8000, 0x02de8fff] PGTABLE [ 0.000000] cma: dma_contiguous_reserve(limit 00000000) [ 0.000000] cma: dma_contiguous_reserve: reserving 16 MiB for global area [ 0.000000] cma: dma_declare_contiguous(size 1000000, base 00000000, limit 00000000) [ 0.000000] cma: CMA: reserved 16 MiB at 0d400000 [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 128212(97%) [ 0.000000] RAMDISK: [mem 0x0e73f000-0x0ffeffff] [ 0.000000] ACPI: RSDP 000fd920 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0fffe550 00038 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0fffe590 01121 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0fffff40 00040 [ 0.000000] ACPI: SSDT 0ffffe40 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0ffffd50 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0ffffd10 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 0ffff6c0 00644 (v01 BXPC BXSSDTPC 00000001 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffa000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] BRK [0x02de9000, 0x02de9fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x0fffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00092fff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65424 [ 0.000000] free_area_init_node: node 0, pgdat 42750660, node_mem_map 4e53f020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3986 pages, LIFO batch:0 [ 0.000000] Normal zone: 480 pages used for memmap [ 0.000000] Normal zone: 61438 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffa000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] mpc: fdac0-fdbec [ 0.000000] MPTABLE: OEM ID: BOCHSCPU [ 0.000000] MPTABLE: Product ID: 0.1 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Lint: type 3, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC LINT 00 [ 0.000000] Lint: type 1, pol 0, trig 0, bus 01, IRQ 00, APIC ID ff, APIC LINT 01 [ 0.000000] Processors: 1 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64912 [ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 branch=arm-jcooper/for-next log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/i386-randconfig-x04-0526/1e2448ecda36ab25b1605978e254fd7b990d2f29/.vmlinuz-2013-05-28-03-39-02-arm-jcooper:for-next:1e2448ecda36ab25b1605978e254fd7b990d2f29-1e2448ecda36ab25b1605978e254fd7b990d2f29-i386-randconfig-x04-0526-6-bay BOOT_IMAGE=/kernel/i386-randconfig-x04-0526/1e2448ecda36ab25b1605978e254fd7b990d2f29/vmlinuz-3.10.0-rc3-00087-g1e2448e [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 178820k/262136k available (17563k kernel code, 82876k reserved, 6333k data, 476k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffcc000 - 0xfffff000 ( 204 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0x507fe000 - 0xff7fe000 (2800 MB) [ 0.000000] lowmem : 0x40000000 - 0x4fffe000 ( 255 MB) [ 0.000000] .init : 0x42757000 - 0x427ce000 ( 476 kB) [ 0.000000] .data : 0x42126f95 - 0x42756590 (6333 kB) [ 0.000000] .text : 0x41000000 - 0x42126f95 (17563 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] CPU 0 irqstacks, hard=4c802000 soft=4c804000 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3567 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] ------------------------ [ 0.000000] | Locking API testsuite: [ 0.000000] ---------------------------------------------------------------------------- [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] recursive read-lock: | ok | | ok | [ 0.000000] recursive read-lock #2: | ok | | ok | [ 0.000000] mixed read-write-lock: | ok | | ok | [ 0.000000] mixed write-read-lock: | ok | | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/123: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/123: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/132: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/132: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/213: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/213: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/231: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/231: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/312: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/312: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/321: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/321: ok | ok | ok | [ 0.000000] hard-irq read-recursion/123: ok | [ 0.000000] soft-irq read-recursion/123: ok | [ 0.000000] hard-irq read-recursion/132: ok | [ 0.000000] soft-irq read-recursion/132: ok | [ 0.000000] hard-irq read-recursion/213: ok | [ 0.000000] soft-irq read-recursion/213: ok | [ 0.000000] hard-irq read-recursion/231: ok | [ 0.000000] soft-irq read-recursion/231: ok | [ 0.000000] hard-irq read-recursion/312: ok | [ 0.000000] soft-irq read-recursion/312: ok | [ 0.000000] hard-irq read-recursion/321: ok | [ 0.000000] soft-irq read-recursion/321: ok | [ 0.000000] ------------------------------------------------------- [ 0.000000] Good, all 218 testcases passed! | [ 0.000000] --------------------------------- [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] ODEBUG: selftest passed [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2992.474 MHz processor [ 0.020001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.94 BogoMIPS (lpj=29924740) [ 0.021424] pid_max: default: 32768 minimum: 301 [ 0.022105] Mount-cache hash table entries: 512 [ 0.023431] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.023431] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.023431] tlb_flushall_shift: -1 [ 0.025269] CPU: GenuineIntel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.032639] ACPI: Core revision 20130328 [ 0.036418] ACPI: All ACPI Tables successfully acquired [ 0.037168] ACPI: setting ELCR to 0200 (from 0c00) [ 0.038090] Performance Events: Getting VERSION: 50014 [ 0.039173] Getting VERSION: 50014 [ 0.039635] Getting ID: 0 [ 0.040012] Getting ID: f000000 [ 0.040448] Getting LVT0: 8700 [ 0.040864] Getting LVT1: 8400 [ 0.041354] enabled ExtINT on CPU#0 [ 0.041854] Using local APIC timer interrupts. [ 0.041854] calibrating APIC timer ... [ 0.050000] ... lapic delta = 6250011 [ 0.050000] ... PM-Timer delta = 357956 [ 0.050000] ... PM-Timer result ok [ 0.050000] ..... delta 6250011 [ 0.050000] ..... mult: 268435928 [ 0.050000] ..... calibration result: 10000017 [ 0.050000] ..... CPU clock speed is 2992.5015 MHz. [ 0.050000] ..... host bus clock speed is 1000.0017 MHz. [ 0.050000] xor: measuring software checksum speed [ 0.140003] pIII_sse : 9271.200 MB/sec [ 0.240003] prefetch64-sse: 11521.200 MB/sec [ 0.240601] xor: using function: prefetch64-sse (11521.200 MB/sec) [ 0.241415] atomic64 test passed for i386+ platform with CX8 and with SSE [ 0.242340] cma: cma_init_reserved_areas() [ 0.242888] cma: cma_create_area(base 0000d400, count 1000) [ 0.244682] cma: cma_create_area: returned 4c83b9c0 [ 0.245512] NET: Registered protocol family 16 [ 0.247438] i2c-core: driver [dummy] registered [ 0.249049] ACPI: bus type PCI registered [ 0.249589] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.250191] PCI: PCI BIOS revision 2.10 entry at 0xfc78c, last bus=0 [ 0.251033] PCI: Using configuration type 1 for base access [ 0.270746] bio: create slab at 0 [ 0.440010] raid6: mmxx1 3912 MB/s [ 0.610007] raid6: mmxx2 4259 MB/s [ 0.780023] raid6: sse1x1 2595 MB/s [ 0.950013] raid6: sse1x2 3317 MB/s [ 1.120003] raid6: sse2x1 4632 MB/s [ 1.290006] raid6: sse2x2 5908 MB/s [ 1.290504] raid6: using algorithm sse2x2 (5908 MB/s) [ 1.291173] raid6: using intx1 recovery algorithm [ 1.291855] i2c-core: driver [max7300] registered [ 1.292490] i2c-core: driver [pcf857x] registered [ 1.293134] i2c-core: driver [sx150x] registered [ 1.293864] ACPI: Added _OSI(Module Device) [ 1.294422] ACPI: Added _OSI(Processor Device) [ 1.295016] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.295635] ACPI: Added _OSI(Processor Aggregator Device) [ 1.297746] ACPI: EC: Look up EC in DSDT [ 1.304131] ACPI: Interpreter enabled [ 1.304628] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 1.305880] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 1.307156] ACPI: (supports S0 S3 S5) [ 1.307645] ACPI: Using PIC for interrupt routing [ 1.308304] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.321878] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.322780] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 1.324618] pci_bus 0000:00: dev 03, created physical slot 3 [ 1.325430] acpiphp: Slot [3] registered [ 1.326033] pci_bus 0000:00: dev 04, created physical slot 4 [ 1.326803] acpiphp: Slot [4] registered [ 1.327379] pci_bus 0000:00: dev 05, created physical slot 5 [ 1.328148] acpiphp: Slot [5] registered [ 1.328729] pci_bus 0000:00: dev 06, created physical slot 6 [ 1.329515] acpiphp: Slot [6] registered [ 1.330054] pci_bus 0000:00: dev 07, created physical slot 7 [ 1.330821] acpiphp: Slot [7] registered [ 1.331396] pci_bus 0000:00: dev 08, created physical slot 8 [ 1.332162] acpiphp: Slot [8] registered [ 1.332743] pci_bus 0000:00: dev 09, created physical slot 9 [ 1.333504] acpiphp: Slot [9] registered [ 1.334107] pci_bus 0000:00: dev 0a, created physical slot 10 [ 1.334901] acpiphp: Slot [10] registered [ 1.335486] pci_bus 0000:00: dev 0b, created physical slot 11 [ 1.336262] acpiphp: Slot [11] registered [ 1.336854] pci_bus 0000:00: dev 0c, created physical slot 12 [ 1.337627] acpiphp: Slot [12] registered [ 1.338220] pci_bus 0000:00: dev 0d, created physical slot 13 [ 1.339024] acpiphp: Slot [13] registered [ 1.339608] pci_bus 0000:00: dev 0e, created physical slot 14 [ 1.340020] acpiphp: Slot [14] registered [ 1.340611] pci_bus 0000:00: dev 0f, created physical slot 15 [ 1.341390] acpiphp: Slot [15] registered [ 1.341976] pci_bus 0000:00: dev 10, created physical slot 16 [ 1.342756] acpiphp: Slot [16] registered [ 1.343366] pci_bus 0000:00: dev 11, created physical slot 17 [ 1.344147] acpiphp: Slot [17] registered [ 1.344737] pci_bus 0000:00: dev 12, created physical slot 18 [ 1.345516] acpiphp: Slot [18] registered [ 1.346103] pci_bus 0000:00: dev 13, created physical slot 19 [ 1.346882] acpiphp: Slot [19] registered [ 1.347479] pci_bus 0000:00: dev 14, created physical slot 20 [ 1.348282] acpiphp: Slot [20] registered [ 1.348867] pci_bus 0000:00: dev 15, created physical slot 21 [ 1.350020] acpiphp: Slot [21] registered [ 1.350603] pci_bus 0000:00: dev 16, created physical slot 22 [ 1.351379] acpiphp: Slot [22] registered [ 1.351968] pci_bus 0000:00: dev 17, created physical slot 23 [ 1.352743] acpiphp: Slot [23] registered [ 1.353347] pci_bus 0000:00: dev 18, created physical slot 24 [ 1.354129] acpiphp: Slot [24] registered [ 1.354716] pci_bus 0000:00: dev 19, created physical slot 25 [ 1.355485] acpiphp: Slot [25] registered [ 1.356075] pci_bus 0000:00: dev 1a, created physical slot 26 [ 1.356850] acpiphp: Slot [26] registered [ 1.357434] pci_bus 0000:00: dev 1b, created physical slot 27 [ 1.358235] acpiphp: Slot [27] registered [ 1.358821] pci_bus 0000:00: dev 1c, created physical slot 28 [ 1.359590] acpiphp: Slot [28] registered [ 1.360055] pci_bus 0000:00: dev 1d, created physical slot 29 [ 1.360830] acpiphp: Slot [29] registered [ 1.361415] pci_bus 0000:00: dev 1e, created physical slot 30 [ 1.362197] acpiphp: Slot [30] registered [ 1.362808] pci_bus 0000:00: dev 1f, created physical slot 31 [ 1.363591] acpiphp: Slot [31] registered [ 1.364139] PCI host bridge to bus 0000:00 [ 1.364691] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.365413] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.366226] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.367044] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.367947] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff] [ 1.368851] pci_bus 0000:00: scanning bus [ 1.369430] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 1.370032] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 [ 1.371540] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 1.373030] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 1.375563] pci 0000:00:01.1: reg 20: [io 0xc1e0-0xc1ef] [ 1.377369] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 1.378182] pci 0000:00:01.3: calling acpi_pm_check_blacklist+0x0/0x50 [ 1.379503] pci 0000:00:01.3: calling quirk_piix4_acpi+0x0/0x130 [ 1.380020] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 1.380981] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 1.381994] pci 0000:00:01.3: calling pci_fixup_piix4_acpi+0x0/0x10 [ 1.383073] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 1.387412] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 1.389181] pci 0000:00:02.0: reg 14: [mem 0xfebe4000-0xfebe4fff] [ 1.394086] pci 0000:00:02.0: reg 30: [mem 0xfebc0000-0xfebcffff pref] [ 1.395491] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 [ 1.396955] pci 0000:00:03.0: reg 10: [io 0xc1c0-0xc1df] [ 1.398267] pci 0000:00:03.0: reg 14: [mem 0xfebe5000-0xfebe5fff] [ 1.402700] pci 0000:00:03.0: reg 30: [mem 0xfebd0000-0xfebdffff pref] [ 1.404041] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000 [ 1.405474] pci 0000:00:04.0: reg 10: [mem 0xfeb80000-0xfeb9ffff] [ 1.406870] pci 0000:00:04.0: reg 14: [io 0xc000-0xc03f] [ 1.410601] pci 0000:00:04.0: reg 30: [mem 0xfeba0000-0xfebbffff pref] [ 1.411756] pci 0000:00:05.0: [8086:2668] type 00 class 0x040300 [ 1.412942] pci 0000:00:05.0: reg 10: [mem 0xfebe0000-0xfebe3fff] [ 1.416121] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 1.417587] pci 0000:00:06.0: reg 10: [io 0xc040-0xc07f] [ 1.418903] pci 0000:00:06.0: reg 14: [mem 0xfebe6000-0xfebe6fff] [ 1.423112] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 1.424574] pci 0000:00:07.0: reg 10: [io 0xc080-0xc0bf] [ 1.425898] pci 0000:00:07.0: reg 14: [mem 0xfebe7000-0xfebe7fff] [ 1.430402] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 1.431863] pci 0000:00:08.0: reg 10: [io 0xc0c0-0xc0ff] [ 1.433184] pci 0000:00:08.0: reg 14: [mem 0xfebe8000-0xfebe8fff] [ 1.437432] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 1.438891] pci 0000:00:09.0: reg 10: [io 0xc100-0xc13f] [ 1.440004] pci 0000:00:09.0: reg 14: [mem 0xfebe9000-0xfebe9fff] [ 1.444244] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000 [ 1.445711] pci 0000:00:0a.0: reg 10: [io 0xc140-0xc17f] [ 1.447027] pci 0000:00:0a.0: reg 14: [mem 0xfebea000-0xfebeafff] [ 1.451338] pci 0000:00:0b.0: [1af4:1001] type 00 class 0x010000 [ 1.452801] pci 0000:00:0b.0: reg 10: [io 0xc180-0xc1bf] [ 1.454117] pci 0000:00:0b.0: reg 14: [mem 0xfebeb000-0xfebebfff] [ 1.458340] pci 0000:00:0c.0: [8086:25ab] type 00 class 0x088000 [ 1.459486] pci 0000:00:0c.0: reg 10: [mem 0xfebec000-0xfebec00f] [ 1.462426] pci_bus 0000:00: fixups for bus [ 1.462983] pci_bus 0000:00: bus scan returning with max=00 [ 1.463718] pci_bus 0000:00: on NUMA node 0 [ 1.464282] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 1.466508] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 1.467603] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 1.468685] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 1.470240] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 1.471315] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0 [ 1.472682] ACPI: Enabled 16 GPEs in block 00 to 0F [ 1.473376] acpi root: \_SB_.PCI0 notify handler is installed [ 1.474210] Found 1 acpi root devices [ 1.475099] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.476165] vgaarb: loaded [ 1.476529] vgaarb: bridge control possible 0000:00:02.0 [ 1.477501] i2c-core: driver [88PM80X] registered [ 1.478152] Error: Driver '88PM80X' is already registered, aborting... [ 1.479027] i2c-core: driver [wm831x] registered [ 1.479654] i2c-core: driver [tps6507x] registered [ 1.480022] i2c-core: driver [tps65217] registered [ 1.480704] i2c-core: driver [mc13xxx] registered [ 1.481338] i2c-core: driver [da903x] registered [ 1.481968] i2c-core: driver [max77686] registered [ 1.482620] i2c-core: driver [max77693] registered [ 1.483267] i2c-core: driver [max8907] registered [ 1.483911] i2c-core: driver [max8925] registered [ 1.484551] i2c-core: driver [pcf50633] registered [ 1.485199] i2c-core: driver [ab3100] registered [ 1.485835] i2c-core: driver [tps6586x] registered [ 1.486511] i2c-core: driver [tps65090] registered [ 1.487160] i2c-core: driver [palmas] registered [ 1.487788] i2c-core: driver [lm3533] registered [ 1.488418] i2c-core: driver [as3711] registered [ 1.489315] SCSI subsystem initialized [ 1.490083] libata version 3.00 loaded. [ 1.490741] ACPI: bus type USB registered [ 1.491333] usbcore: registered new interface driver usbfs [ 1.492086] usbcore: registered new interface driver hub [ 1.492860] usbcore: registered new device driver usb [ 1.493641] i2c-core: driver [tca6416-keypad] registered [ 1.494379] i2c-core: driver [tca8418_keypad] registered [ 1.495149] Linux video capture interface: v2.00 [ 1.495816] pps_core: LinuxPPS API ver. 1 registered [ 1.496472] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.497682] PTP clock support registered [ 1.498243] EDAC MC: Ver: 3.0.0 [ 1.499232] wmi: Mapper loaded [ 1.499728] PCI: Using ACPI for IRQ routing [ 1.500008] PCI: pci_cache_line_size set to 64 bytes [ 1.500702] pci 0000:00:01.1: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0) [ 1.501774] pci 0000:00:01.1: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0) [ 1.502767] pci 0000:00:01.1: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0) [ 1.503846] pci 0000:00:01.1: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0) [ 1.504837] pci 0000:00:01.1: BAR 4: reserving [io 0xc1e0-0xc1ef flags 0x40101] (d=0, p=0) [ 1.505954] pci 0000:00:02.0: BAR 0: reserving [mem 0xfc000000-0xfdffffff flags 0x42208] (d=0, p=0) [ 1.507142] pci 0000:00:02.0: BAR 1: reserving [mem 0xfebe4000-0xfebe4fff flags 0x40200] (d=0, p=0) [ 1.508338] pci 0000:00:03.0: BAR 0: reserving [io 0xc1c0-0xc1df flags 0x40101] (d=0, p=0) [ 1.509435] pci 0000:00:03.0: BAR 1: reserving [mem 0xfebe5000-0xfebe5fff flags 0x40200] (d=0, p=0) [ 1.510015] pci 0000:00:04.0: BAR 0: reserving [mem 0xfeb80000-0xfeb9ffff flags 0x40200] (d=0, p=0) [ 1.511201] pci 0000:00:04.0: BAR 1: reserving [io 0xc000-0xc03f flags 0x40101] (d=0, p=0) [ 1.512301] pci 0000:00:05.0: BAR 0: reserving [mem 0xfebe0000-0xfebe3fff flags 0x40200] (d=0, p=0) [ 1.513494] pci 0000:00:06.0: BAR 0: reserving [io 0xc040-0xc07f flags 0x40101] (d=0, p=0) [ 1.514602] pci 0000:00:06.0: BAR 1: reserving [mem 0xfebe6000-0xfebe6fff flags 0x40200] (d=0, p=0) [ 1.515793] pci 0000:00:07.0: BAR 0: reserving [io 0xc080-0xc0bf flags 0x40101] (d=0, p=0) [ 1.516891] pci 0000:00:07.0: BAR 1: reserving [mem 0xfebe7000-0xfebe7fff flags 0x40200] (d=0, p=0) [ 1.518087] pci 0000:00:08.0: BAR 0: reserving [io 0xc0c0-0xc0ff flags 0x40101] (d=0, p=0) [ 1.520010] pci 0000:00:08.0: BAR 1: reserving [mem 0xfebe8000-0xfebe8fff flags 0x40200] (d=0, p=0) [ 1.521203] pci 0000:00:09.0: BAR 0: reserving [io 0xc100-0xc13f flags 0x40101] (d=0, p=0) [ 1.522298] pci 0000:00:09.0: BAR 1: reserving [mem 0xfebe9000-0xfebe9fff flags 0x40200] (d=0, p=0) [ 1.523496] pci 0000:00:0a.0: BAR 0: reserving [io 0xc140-0xc17f flags 0x40101] (d=0, p=0) [ 1.524590] pci 0000:00:0a.0: BAR 1: reserving [mem 0xfebea000-0xfebeafff flags 0x40200] (d=0, p=0) [ 1.525783] pci 0000:00:0b.0: BAR 0: reserving [io 0xc180-0xc1bf flags 0x40101] (d=0, p=0) [ 1.526877] pci 0000:00:0b.0: BAR 1: reserving [mem 0xfebeb000-0xfebebfff flags 0x40200] (d=0, p=0) [ 1.528069] pci 0000:00:0c.0: BAR 0: reserving [mem 0xfebec000-0xfebec00f flags 0x40200] (d=0, p=0) [ 1.529409] e820: reserve RAM buffer [mem 0x00093c00-0x0009ffff] [ 1.530014] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 1.531412] NET: Registered protocol family 23 [ 1.532057] NET: Registered protocol family 8 [ 1.532637] NET: Registered protocol family 20 [ 1.533685] nfc: nfc_init: NFC Core ver 0.1 [ 1.534305] NET: Registered protocol family 39 [ 1.536166] Switching to clocksource hpet [ 1.536894] pnp: PnP ACPI init [ 1.537344] ACPI: bus type PNP registered [ 1.537988] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.538997] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.538997] cfg80211: Calling CRDA to update world regulatory domain [ 1.538997] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.538997] pnp 00:03: [dma 2] [ 1.538997] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.538997] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.538997] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.538997] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.540145] pnp: PnP ACPI: found 7 devices [ 1.540694] ACPI: bus type PNP unregistered [ 1.541248] INFO_MDMA: LNW DMA Driver Version 1.1.0 [ 1.577308] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.578054] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.578796] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.579624] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff] [ 1.580475] NET: Registered protocol family 1 [ 1.581094] pci 0000:00:00.0: calling quirk_natoma+0x0/0x30 [ 1.581834] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.582614] pci 0000:00:00.0: calling quirk_passive_release+0x0/0x80 [ 1.583505] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.584289] pci 0000:00:01.0: calling quirk_isa_dma_hangs+0x0/0x30 [ 1.585105] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.585960] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xd0 [ 1.586753] pci 0000:00:02.0: Boot video device [ 1.587376] pci 0000:00:04.0: calling quirk_e100_interrupt+0x0/0x1d0 [ 1.588312] PCI: CLS 0 bytes, default 64 [ 1.589097] Trying to unpack rootfs image as initramfs... [ 2.468158] Freeing initrd memory: 25284k freed [ 2.561400] DMA-API: preallocated 65536 debug entries [ 2.562104] DMA-API: debugging enabled by kernel config [ 2.564156] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 2.565002] apm: overridden by ACPI. [ 2.565527] microcode: no support for this CPU vendor [ 2.566486] cryptomgr_test (18) used greatest stack depth: 7160 bytes left [ 2.567687] PCLMULQDQ-NI instructions are not detected. [ 2.568859] rcu-torture:--- Start of test: nreaders=2 nfakewriters=4 stat_interval=60 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0 stall_cpu_holdoff=10 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0 [ 2.573970] VFS: Disk quotas dquot_6.5.2 [ 2.574541] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.575845] jffs2: version 2.2. (NAND) [ 2.576915] JFS: nTxBlock = 1722, nTxLock = 13780 [ 2.578553] NILFS version 2 loaded [ 2.579018] OCFS2 1.5.0 [ 2.579530] ocfs2: Registered cluster interface o2cb [ 2.580189] OCFS2 DLMFS 1.5.0 [ 2.580661] OCFS2 User DLM kernel interface loaded [ 2.581304] OCFS2 Node Manager 1.5.0 [ 2.582217] OCFS2 DLM 1.5.0 [ 2.582693] bio: create slab at 1 [ 2.584262] Btrfs loaded [ 2.584662] msgmni has been set to 430 [ 2.585639] cryptomgr_test (46) used greatest stack depth: 6832 bytes left [ 2.586920] cryptomgr_test (50) used greatest stack depth: 6752 bytes left [ 2.587911] cryptomgr_test (51) used greatest stack depth: 6696 bytes left [ 2.589138] cryptomgr_test (53) used greatest stack depth: 6672 bytes left [ 2.591565] cryptomgr_test (63) used greatest stack depth: 6596 bytes left [ 2.593223] cryptomgr_test (68) used greatest stack depth: 6504 bytes left [ 2.594379] alg: No test for crc32 (crc32-table) [ 2.595155] alg: No test for stdrng (krng) [ 2.602284] NET: Registered protocol family 38 [ 2.602963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.603948] io scheduler noop registered (default) [ 2.604585] io scheduler deadline registered [ 2.605153] io scheduler cfq registered [ 2.605825] xz_dec_test: module loaded [ 2.606328] xz_dec_test: Create a device node with 'mknod xz_dec_test c 251 0' and write .xz files to it. [ 2.608108] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.608856] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8 [ 2.609772] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 2.610795] cpcihp_generic: not configured, disabling. [ 2.611506] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.615843] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed [ 2.616755] i2c-core: driver [adp8860_bl] registered [ 2.617429] i2c-core: driver [adp8870_bl] registered [ 2.618208] i2c-core: driver [lm3630_bl] registered [ 2.618877] i2c-core: driver [lm3639_bl] registered [ 2.619546] i2c-core: driver [lp855x] registered [ 2.620348] rivafb_setup START [ 2.620992] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 2.622701] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xfc000000 [ 2.623922] CL Picasso4: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer [ 2.624927] cirrusfb 0000:00:02.0: could not register fb device; err = -38! [ 2.625869] cirrusfb: probe of 0000:00:02.0 failed with error -38 [ 2.626768] usbcore: registered new interface driver udlfb [ 2.628614] GHES: HEST is not enabled! [ 2.629121] ERST DBG: ERST support is disabled. [ 2.630965] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 2.631737] PCI: setting IRQ 11 as level-triggered [ 2.632393] virtio-pci 0000:00:03.0: enabling bus mastering [ 2.633195] virtio-pci 0000:00:03.0: setting latency timer to 64 [ 2.635256] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 2.636023] PCI: setting IRQ 10 as level-triggered [ 2.636684] virtio-pci 0000:00:06.0: enabling bus mastering [ 2.637443] virtio-pci 0000:00:06.0: setting latency timer to 64 [ 2.639436] virtio-pci 0000:00:07.0: enabling bus mastering [ 2.640205] virtio-pci 0000:00:07.0: setting latency timer to 64 [ 2.642330] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 2.643145] virtio-pci 0000:00:08.0: enabling bus mastering [ 2.643901] virtio-pci 0000:00:08.0: setting latency timer to 64 [ 2.646621] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 2.647396] virtio-pci 0000:00:09.0: enabling bus mastering [ 2.648161] virtio-pci 0000:00:09.0: setting latency timer to 64 [ 2.650026] virtio-pci 0000:00:0a.0: enabling bus mastering [ 2.650790] virtio-pci 0000:00:0a.0: setting latency timer to 64 [ 2.652734] virtio-pci 0000:00:0b.0: enabling bus mastering [ 2.653538] virtio-pci 0000:00:0b.0: setting latency timer to 64 [ 2.682597] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.985511] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 2.986453] ac.o: No PCI boards found. [ 2.986956] ac.o: For an ISA board you must supply memory and irq parameters. [ 2.987892] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 2.988751] Non-volatile memory driver v1.3 [ 2.989314] toshiba: not a supported Toshiba laptop [ 2.990089] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 2.990791] smapi::smapi_init, ERROR invalid usSmapiID [ 2.991475] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 2.992683] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 2.993670] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 2.994508] Linux agpgart interface v0.103 [ 2.995565] SyncLink PC Card driver $Revision: 4.34 $, tty major#246 [ 2.996523] i2c-core: driver [st33zp24_i2c] registered [ 2.997211] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets [ 2.998716] intelfb: Version 0.9.6 [ 3.003362] brd: module loaded [ 3.006047] loop: module loaded [ 3.006485] Compaq SMART2 Driver (v 2.6.0) [ 3.007224] MM: desc_per_page = 128 [ 3.008803] vda: unknown partition table [ 3.010295] vdb: unknown partition table [ 3.011784] vdc: unknown partition table [ 3.013359] vdd: unknown partition table [ 3.014888] vde: unknown partition table [ 3.016318] vdf: unknown partition table [ 3.017278] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 3.018169] i2c-core: driver [ad_dpot] registered [ 3.018850] i2c-core: driver [bmp085] registered [ 3.019587] i2c-core: driver [bh1780] registered [ 3.020212] i2c-core: driver [apds990x] registered [ 3.020927] i2c-core: driver [ds1682] registered [ 3.021559] i2c-core: driver [hmc6352] registered [ 3.022272] i2c-core: driver [eeprom] registered [ 3.022937] i2c-core: driver [lis3lv02d_i2c] registered [ 3.023668] Guest personality initialized and is inactive [ 3.024448] VMCI host device registered (name=vmci, major=10, minor=61) [ 3.025321] Initialized host personality [ 3.025973] i2c-core: driver [htcpld-chip] registered [ 3.026686] i2c-core: driver [arizona] registered [ 3.027326] i2c-core: driver [wm8994] registered [ 3.027989] i2c-core: driver [adp5520] registered [ 3.028782] usbcore: registered new interface driver viperboard [ 3.029578] i2c-core: driver [retu-mfd] registered [ 3.030496] Loading iSCSI transport class v2.0-870. [ 3.031480] rdac: device handler registered [ 3.032088] hp_sw: device handler registered [ 3.032663] emc: device handler registered [ 3.033242] alua: device handler registered [ 3.034058] bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.14 (Mar 08, 2013) [ 3.035207] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 3.035946] Detecting Adaptec I2O RAID controllers... [ 3.036784] Adaptec aacraid driver 1.2-0[30200]-ms [ 3.038106] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 3.039050] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0 [ 3.040048] scsi: Detection failed (no card) [ 3.040881] iscsi: registered transport (qla4xxx) [ 3.041537] QLogic iSCSI HBA Driver [ 3.042010] Brocade BFA FC/FCOE SCSI driver - version: 3.1.2.1 [ 3.042868] csiostor: Chelsio FCoE driver 1.0.0 [ 3.043729] DC390: clustering now enabled by default. If you get problems load [ 3.044682] with "disable_clustering=1" and report to maintainers [ 3.045622] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013 [ 3.046562] mpt2sas version 14.100.00.00 loaded [ 3.047339] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 3.048205] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 3.049144] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 3.050134] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 3.051064] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012) [ 3.052046] iscsi: registered transport (bnx2i) [ 3.052725] iscsi: registered transport (be2iscsi) [ 3.053405] In beiscsi_module_init, tt=426bf7a0 [ 3.054148] VMware PVSCSI driver - version 1.0.2.0-k [ 3.054833] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 3.055735] osst :I: Tape driver with OnStream support version 0.99.4 [ 3.055735] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 3.058046] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 3.059541] SSFDC read-only Flash Translation layer [ 3.060192] mtdoops: mtd device (mtddev=name/number) must be supplied [ 3.061120] Failed to ioremap_nocache [ 3.061772] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.063034] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.064258] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.065480] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.066701] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.067924] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 3.069154] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit), 128MiB, page size: 512, OOB size: 16 [ 3.070747] flash size: 128 MiB [ 3.071172] page size: 512 bytes [ 3.071610] OOB area size: 16 bytes [ 3.072075] sector size: 16 KiB [ 3.072501] pages number: 262144 [ 3.072964] pages per sector: 32 [ 3.073400] bus width: 8 [ 3.073748] bits in sector size: 14 [ 3.074212] bits in page size: 9 [ 3.074650] bits in OOB size: 4 [ 3.075072] flash size with OOB: 135168 KiB [ 3.075631] page address bytes: 4 [ 3.076074] sector address bytes: 3 [ 3.076543] options: 0x42 [ 3.077511] Scanning device for bad blocks [ 3.108217] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 3.109037] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 3.110476] ftl_cs: FTL header not found. [ 3.111975] libphy: Fixed MDIO Bus: probed [ 3.112628] arcnet loaded. [ 3.113037] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 3.113946] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 3.114926] arcnet: raw mode (`r') encapsulation support loaded. [ 3.115743] arcnet: COM90xx chipset support [ 3.416787] S3: No ARCnet cards found. [ 3.417302] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 3.418249] E-mail me if you actually test this driver, please! [ 3.419026] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 3.420089] arcnet: RIM I (entirely mem-mapped) support [ 3.420782] E-mail me if you actually test the RIM I driver, please! [ 3.421619] Given: node 00h, shmem 0h, irq 0 [ 3.422182] No autoprobe for RIM I; you must specify the shmem and irq! [ 3.423339] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 3.424063] Copyright (c) 2007 Atheros Corporation. [ 3.424905] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012) [ 3.425950] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11) [ 3.427626] v1.01-e (2.4 port) Sep-11-2006 Donald Becker [ 3.427626] http://www.scyld.com/network/drivers.html [ 3.429460] sky2: driver version 1.30 [ 3.430398] tehuti: Tehuti Networks(R) Network Driver, 7.29.3 [ 3.431157] tehuti: Options: hw_csum [ 3.431673] tlan: ThunderLAN driver v1.17 [ 3.432233] tlan: 0 devices installed, PCI: 0 EISA: 0 [ 3.433126] mkiss: AX.25 Multikiss, Hans Albas PE1AYX [ 3.433797] AX.25: 6pack driver, Revision: 0.3.0 [ 3.434406] YAM driver version 0.8 by F1OAT/F6FBB [ 3.436082] AX.25: bpqether driver version 004 [ 3.436680] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 3.436680] baycom_ser_fdx: version 0.10 [ 3.438991] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA [ 3.439751] hdlcdrv: version 0.8 [ 3.440181] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 3.440181] baycom_ser_hdx: version 0.10 [ 3.442484] usbcore: registered new interface driver irda-usb [ 3.443709] usbcore: registered new interface driver mcs7780 [ 3.444484] usbcore: registered new interface driver ksdazzle-sir [ 3.445287] PPP generic driver version 2.4.2 [ 3.446050] PPP BSD Compression module registered [ 3.446683] PPP Deflate Compression module registered [ 3.447354] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). [ 3.448298] hdlc: HDLC support module revision 1.22 [ 3.448964] x25_asy: X.25 async: version 0.00 ALPHA (dynamic channels, max=256) [ 3.449966] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org. [ 3.450789] LAPB Ethernet driver version 0.02 [ 3.451406] airo(): Probing for PCI adapters [ 3.452084] airo(): Finished probing for PCI adapters [ 3.452825] Loaded prism54 driver, version 1.2 [ 3.453458] usbcore: registered new interface driver rtl8187 [ 3.454454] usbcore: registered new interface driver rndis_wlan [ 3.455260] usbcore: registered new interface driver zd1201 [ 3.456105] usbcore: registered new interface driver usb8xxx [ 3.456924] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 3.457688] Copyright(c) 2003-2013 Intel Corporation [ 3.458397] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:d [ 3.459319] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 3.460114] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds [ 3.461317] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 3.462228] usbcore: registered new interface driver ath9k_htc [ 3.463055] usbcore: registered new interface driver carl9170 [ 3.463840] usbcore: registered new interface driver ar5523 [ 3.464710] mac80211_hwsim: Initializing radio 0 [ 3.465642] cfg80211: Updating information on frequency 2412 MHz with regulatory rule: [ 3.466679] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.467661] cfg80211: Updating information on frequency 2417 MHz with regulatory rule: [ 3.468696] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.469674] cfg80211: Updating information on frequency 2422 MHz with regulatory rule: [ 3.470710] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.471694] cfg80211: Updating information on frequency 2427 MHz with regulatory rule: [ 3.472730] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.473754] cfg80211: Updating information on frequency 2432 MHz with regulatory rule: [ 3.474798] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.475789] cfg80211: Updating information on frequency 2437 MHz with regulatory rule: [ 3.476828] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.477811] cfg80211: Updating information on frequency 2442 MHz with regulatory rule: [ 3.478848] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.479830] cfg80211: Updating information on frequency 2447 MHz with regulatory rule: [ 3.480868] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.481846] cfg80211: Updating information on frequency 2452 MHz with regulatory rule: [ 3.482916] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.483901] cfg80211: Updating information on frequency 2457 MHz with regulatory rule: [ 3.484938] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.485918] cfg80211: Updating information on frequency 2462 MHz with regulatory rule: [ 3.486985] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.487968] cfg80211: Updating information on frequency 2467 MHz with regulatory rule: [ 3.489004] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.489983] cfg80211: Updating information on frequency 2472 MHz with regulatory rule: [ 3.491019] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) [ 3.492001] cfg80211: Updating information on frequency 2484 MHz with regulatory rule: [ 3.493069] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) [ 3.494053] cfg80211: Updating information on frequency 5180 MHz with regulatory rule: [ 3.495091] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 3.496077] cfg80211: Updating information on frequency 5200 MHz with regulatory rule: [ 3.497133] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 3.498119] cfg80211: Updating information on frequency 5220 MHz with regulatory rule: [ 3.499154] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 3.500137] cfg80211: Updating information on frequency 5240 MHz with regulatory rule: [ 3.501172] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 3.502152] cfg80211: Disabling freq 5260 MHz [ 3.502731] cfg80211: Disabling freq 5280 MHz [ 3.503340] cfg80211: Disabling freq 5300 MHz [ 3.503926] cfg80211: Disabling freq 5320 MHz [ 3.504506] cfg80211: Disabling freq 5500 MHz [ 3.505081] cfg80211: Disabling freq 5520 MHz [ 3.505660] cfg80211: Disabling freq 5540 MHz [ 3.506235] cfg80211: Disabling freq 5560 MHz [ 3.506815] cfg80211: Disabling freq 5580 MHz [ 3.507390] cfg80211: Disabling freq 5600 MHz [ 3.507971] cfg80211: Disabling freq 5620 MHz [ 3.508551] cfg80211: Disabling freq 5640 MHz [ 3.509128] cfg80211: Disabling freq 5660 MHz [ 3.509708] cfg80211: Disabling freq 5680 MHz [ 3.510283] cfg80211: Disabling freq 5700 MHz [ 3.510865] cfg80211: Updating information on frequency 5745 MHz with regulatory rule: [ 3.511900] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 3.512908] cfg80211: Updating information on frequency 5765 MHz with regulatory rule: [ 3.513947] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 3.514924] cfg80211: Updating information on frequency 5785 MHz with regulatory rule: [ 3.515961] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 3.516942] cfg80211: Updating information on frequency 5805 MHz with regulatory rule: [ 3.517985] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 3.518971] cfg80211: Updating information on frequency 5825 MHz with regulatory rule: [ 3.520002] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (600 mBi, 2000 mBm) [ 3.521224] ieee80211 phy0: Failed to select rate control algorithm [ 3.522059] ieee80211 phy0: Failed to initialize rate control algorithm [ 3.523495] mac80211_hwsim: ieee80211_register_hw failed (-2) [ 3.524338] ------------[ cut here ]------------ [ 3.524966] WARNING: at /c/kernel-tests/src/linux/include/linux/kref.h:47 kobject_get+0x2f/0x50() [ 3.526130] CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.0-rc3-00087-g1e2448e #72 [ 3.527112] 4247c074 4c827e5c 4210fbd1 4c827e84 410239f4 424793fd 4247c074 0000002f [ 3.528287] 41429f9f 41429f9f 4f098370 426e2f14 4269ff74 4c827e94 41023aad 00000009 [ 3.529462] 00000000 4c827ea0 41429f9f 4f098368 4c827ea8 415b24ef 4c827ebc 415b57bd [ 3.530640] Call Trace: [ 3.530985] [<4210fbd1>] dump_stack+0x16/0x18 [ 3.531592] [<410239f4>] warn_slowpath_common+0x54/0x70 [ 3.532291] [<41429f9f>] ? kobject_get+0x2f/0x50 [ 3.532953] [<41429f9f>] ? kobject_get+0x2f/0x50 [ 3.533583] [<41023aad>] warn_slowpath_null+0x1d/0x20 [ 3.534261] [<41429f9f>] kobject_get+0x2f/0x50 [ 3.534871] [<415b24ef>] get_device+0xf/0x30 [ 3.535453] [<415b57bd>] driver_detach+0x4d/0xc0 [ 3.536084] [<415b48de>] bus_remove_driver+0x5e/0xb0 [ 3.536757] [<415b6007>] driver_unregister+0x57/0xa0 [ 3.537423] [<4211e126>] ? mac80211_hwsim_free+0xac/0xb3 [ 3.538143] [<415b759b>] platform_driver_unregister+0xb/0x10 [ 3.538924] [<42788fa6>] init_mac80211_hwsim+0x8cf/0x8e0 [ 3.539642] [<427886d7>] ? wil6210_driver_init+0x16/0x16 [ 3.540365] [<42757abf>] do_one_initcall+0x7e/0x10d [ 3.541028] [<42757c1f>] kernel_init_freeable+0xd1/0x173 [ 3.541744] [<4275747a>] ? loglevel+0x2b/0x2b [ 3.542335] [<421069db>] kernel_init+0xb/0xe0 [ 3.542964] [<42125edb>] ret_from_kernel_thread+0x1b/0x30 [ 3.543697] [<421069d0>] ? rest_init+0x130/0x130 [ 3.544344] ---[ end trace 6849279f42c445d4 ]--- [ 3.544969] ------------[ cut here ]------------ [ 3.545593] WARNING: at /c/kernel-tests/src/linux/fs/sysfs/inode.c:324 sysfs_hash_and_remove+0x2e/0xa0() [ 3.546834] sysfs: can not remove 'driver', no directory [ 3.547539] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.10.0-rc3-00087-g1e2448e #72 [ 3.548644] 424869a0 4c827e18 4210fbd1 4c827e40 410239f4 424869cc 4c827e6c 00000144 [ 3.549821] 4110c66e 4110c66e 00000000 426e2f14 4f09839c 4c827e58 41023a5e 00000009 [ 3.550999] 4c827e50 424869cc 4c827e6c 4c827e84 4110c66e 424869a0 00000144 424869cc [ 3.552182] Call Trace: [ 3.552522] [<4210fbd1>] dump_stack+0x16/0x18 [ 3.553149] [<410239f4>] warn_slowpath_common+0x54/0x70 [ 3.553855] [<4110c66e>] ? sysfs_hash_and_remove+0x2e/0xa0 [ 3.554597] [<4110c66e>] ? sysfs_hash_and_remove+0x2e/0xa0 [ 3.555334] [<41023a5e>] warn_slowpath_fmt+0x2e/0x30 [ 3.556005] [<4110c66e>] sysfs_hash_and_remove+0x2e/0xa0 [ 3.556725] [<4110ed49>] sysfs_remove_link+0x29/0x30 [ 3.557396] [<415b51d8>] driver_sysfs_remove+0x28/0x30 [ 3.558093] [<415b56e6>] __device_release_driver+0x26/0xb0 [ 3.558832] [<415b57f3>] driver_detach+0x83/0xc0 [ 3.559456] [<415b48de>] bus_remove_driver+0x5e/0xb0 [ 3.560130] [<415b6007>] driver_unregister+0x57/0xa0 [ 3.560803] [<4211e126>] ? mac80211_hwsim_free+0xac/0xb3 [ 3.561528] [<415b759b>] platform_driver_unregister+0xb/0x10 [ 3.562287] [<42788fa6>] init_mac80211_hwsim+0x8cf/0x8e0 [ 3.563073] [<427886d7>] ? wil6210_driver_init+0x16/0x16 [ 3.563793] [<42757abf>] do_one_initcall+0x7e/0x10d [ 3.564453] [<42757c1f>] kernel_init_freeable+0xd1/0x173 [ 3.565173] [<4275747a>] ? loglevel+0x2b/0x2b [ 3.565771] [<421069db>] kernel_init+0xb/0xe0 [ 3.566365] [<42125edb>] ret_from_kernel_thread+0x1b/0x30 [ 3.567095] [<421069d0>] ? rest_init+0x130/0x130 [ 3.567728] ---[ end trace 6849279f42c445d5 ]--- [ 3.568364] ------------[ cut here ]------------ [ 3.568977] kernel BUG at /c/kernel-tests/src/linux/include/linux/mm.h:283! [ 3.569886] invalid opcode: 0000 [#1] [ 3.570404] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.10.0-rc3-00087-g1e2448e #72 [ 3.571514] task: 4c81f000 ti: 4c826000 task.ti: 4c826000 [ 3.572224] EIP: 0060:[<4108e197>] EFLAGS: 00010246 CPU: 0 [ 3.572962] EIP is at __free_pages+0x7/0x40 [ 3.573035] EAX: 4e7202e0 EBX: 4f098370 ECX: 00000000 EDX: 00000000 [ 3.573035] ESI: 4f098368 EDI: 4f0971d0 EBP: 4c827e48 ESP: 4c827e44 [ 3.573035] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 3.573035] CR0: 8005003b CR2: 00000000 CR3: 027d1000 CR4: 00000690 [ 3.573035] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 3.573035] DR6: ffff0ff0 DR7: 00000400 [ 3.573035] Stack: [ 3.573035] 410ad199 4c827e6c 415b1a77 00000246 4c827e74 00000002 4c81f001 4f098370 [ 3.573035] 4269fc80 4f097248 4c827e80 4142a3da 4f098368 426e2f14 4f09839c 4c827ea0 [ 3.573035] 4142a00c 4c81f000 00000001 4f098368 4f098368 426e2f14 4f09839c 4c827ea8 [ 3.573035] Call Trace: [ 3.573035] [<410ad199>] ? kfree+0x59/0x60 [ 3.573035] [<415b1a77>] device_release+0xa7/0xb0 [ 3.573035] [<4142a3da>] kobject_cleanup+0x4a/0x60 [ 3.573035] [<4142a00c>] kobject_put+0x4c/0x50 [ 3.573035] [<415b252f>] put_device+0xf/0x20 [ 3.573035] [<415b581c>] driver_detach+0xac/0xc0 [ 3.573035] [<415b48de>] bus_remove_driver+0x5e/0xb0 [ 3.573035] [<415b6007>] driver_unregister+0x57/0xa0 [ 3.573035] [<4211e126>] ? mac80211_hwsim_free+0xac/0xb3 [ 3.573035] [<415b759b>] platform_driver_unregister+0xb/0x10 [ 3.573035] [<42788fa6>] init_mac80211_hwsim+0x8cf/0x8e0 [ 3.573035] [<427886d7>] ? wil6210_driver_init+0x16/0x16 [ 3.573035] [<42757abf>] do_one_initcall+0x7e/0x10d [ 3.573035] [<42757c1f>] kernel_init_freeable+0xd1/0x173 [ 3.573035] [<4275747a>] ? loglevel+0x2b/0x2b [ 3.573035] [<421069db>] kernel_init+0xb/0xe0 [ 3.573035] [<42125edb>] ret_from_kernel_thread+0x1b/0x30 [ 3.573035] [<421069d0>] ? rest_init+0x130/0x130 [ 3.573035] Code: 90 90 90 90 e8 3b 57 fd ff ff 75 f0 9d 83 c4 10 5b 5e 5f 5d c3 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 90 8b 48 10 85 c9 75 09 <0f> 0b 8d b4 26 00 00 00 00 ff 48 10 0f 94 c1 84 c9 74 1c 55 89 [ 3.573035] EIP: [<4108e197>] __free_pages+0x7/0x40 SS:ESP 0068:4c827e44 [ 3.598981] ---[ end trace 6849279f42c445d6 ]--- [ 3.599610] swapper (1) used greatest stack depth: 5908 bytes left [ 3.600442] tsc: Refined TSC clocksource calibration: 2992.495 MHz [ 3.601259] Switching to clocksource tsc [ 3.601804] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 3.601804] [ 3.603006] Rebooting in 10 seconds..