| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1369797042-22174-2-git-send-email-zhangwm@marvell.com>
Date: Wed, 29 May 2013 11:10:42 +0800
From: Neil Zhang <zhangwm@...vell.com>
To: <haojian.zhuang@...il.com>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
CC: Neil Zhang <zhangwm@...vell.com>, Chao Xie <chao.xie@...vell.com>
Subject: [PATCH] ARM: mmp: bring up pxa988 with device tree support
bring up pxa988 with device tree support.
Change-Id: I6fc869b7d5ff8dc6e4eb0042a89429200f7a9fb1
Signed-off-by: Neil Zhang <zhangwm@...vell.com>
Signed-off-by: Chao Xie <chao.xie@...vell.com>
---
arch/arm/boot/dts/pxa988-dkb.dts | 36 ++++++
arch/arm/boot/dts/pxa988.dtsi | 189 +++++++++++++++++++++++++++++
arch/arm/mach-mmp/Kconfig | 27 ++++
arch/arm/mach-mmp/Makefile | 2 +
arch/arm/mach-mmp/common.c | 11 ++-
arch/arm/mach-mmp/common.h | 2 +
arch/arm/mach-mmp/headsmp.S | 104 ++++++++++++++++
arch/arm/mach-mmp/include/mach/addr-map.h | 6 +
arch/arm/mach-mmp/mmpx-dt.c | 74 +++++++++++
arch/arm/mach-mmp/platsmp.c | 163 +++++++++++++++++++++++++
arch/arm/mach-mmp/reset.c | 66 ++++++++++
arch/arm/mach-mmp/reset.h | 29 +++++
drivers/clk/mmp/Makefile | 1 +
13 files changed, 709 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/boot/dts/pxa988-dkb.dts
create mode 100644 arch/arm/boot/dts/pxa988.dtsi
create mode 100644 arch/arm/mach-mmp/headsmp.S
create mode 100644 arch/arm/mach-mmp/mmpx-dt.c
create mode 100644 arch/arm/mach-mmp/platsmp.c
create mode 100644 arch/arm/mach-mmp/reset.c
create mode 100644 arch/arm/mach-mmp/reset.h
diff --git a/arch/arm/boot/dts/pxa988-dkb.dts b/arch/arm/boot/dts/pxa988-dkb.dts
new file mode 100644
index 0000000..2cee3ed
--- /dev/null
+++ b/arch/arm/boot/dts/pxa988-dkb.dts
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2012 Marvell Technology Group Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@...vell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "pxa988.dtsi"
+
+/ {
+ model = "Marvell PXA988 DKB Development Board";
+ compatible = "mrvl,pxa988-dkb", "mrvl,pxa988";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+ };
+
+ memory {
+ reg = <0x00000000 0x10000000>;
+ };
+
+ soc {
+ apb@...00000 {
+ uart1: uart@...17000 {
+ status = "okay";
+ };
+
+ rtc: rtc@...10000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/pxa988.dtsi b/arch/arm/boot/dts/pxa988.dtsi
new file mode 100644
index 0000000..567d33d
--- /dev/null
+++ b/arch/arm/boot/dts/pxa988.dtsi
@@ -0,0 +1,189 @@
+/*
+ * Copyright (C) 2013 Marvell Technology Group Ltd.
+ * Author: Chao Xie <chao.xie@...vell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ i2c0 = &twsi1;
+ i2c1 = &twsi2;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ };
+ };
+
+ gic: interrupt-controller@...fe100 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0xd1dff000 0x1000>,
+ <0xd1dfe100 0x0100>;
+ };
+
+ L2: l2-cache-controller@...fb000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xd1dfb000 0x1000>;
+ arm,data-latency = <2 1 1>;
+ arm,tag-latency = <2 1 1>;
+ arm,pwr-dynamic-clk-gating;
+ arm,pwr-standby-mode;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ local-timer@...fe600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xd1dfe600 0x20>;
+ interrupts = <1 13 0x304>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ axi@...00000 { /* AXI */
+ compatible = "mrvl,axi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4200000 0x00200000>;
+ ranges;
+
+ intc: wakeupgen@...82000 {
+ compatible = "mrvl,mmp-intc";
+ reg = <0xd4282000 0x1000>;
+ mrvl,intc-wakeup = <0x114 0x3
+ 0x144 0x3>;
+ };
+
+ };
+
+ apb@...00000 { /* APB */
+ compatible = "mrvl,apb-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4000000 0x00200000>;
+ ranges;
+
+ timer0: timer@...14000 {
+ compatible = "mrvl,mmp-timer";
+ reg = <0xd4014000 0x100>;
+ interrupts = <0 13 0x4>;
+ };
+
+ uart1: uart@...17000 {
+ compatible = "mrvl,mmp-uart";
+ reg = <0xd4017000 0x1000>;
+ interrupts = <0 27 0x4>;
+ status = "disabled";
+ };
+
+ uart2: uart@...18000 {
+ compatible = "mrvl,mmp-uart";
+ reg = <0xd4018000 0x1000>;
+ interrupts = <0 28 0x4>;
+ status = "disabled";
+ };
+
+ uart3: uart@...36000 {
+ compatible = "mrvl,mmp-uart";
+ reg = <0xd4036000 0x1000>;
+ interrupts = <0 59 0x4>;
+ status = "disabled";
+ };
+
+ gpio@...19000 {
+ compatible = "marvell,mmp-gpio";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4019000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <49>;
+ interrupt-names = "gpio_mux";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ranges;
+
+ gcb0: gpio@...19000 {
+ reg = <0xd4019000 0x4>;
+ };
+
+ gcb1: gpio@...19004 {
+ reg = <0xd4019004 0x4>;
+ };
+
+ gcb2: gpio@...19008 {
+ reg = <0xd4019008 0x4>;
+ };
+
+ gcb3: gpio@...19100 {
+ reg = <0xd4019100 0x4>;
+ };
+ };
+
+ twsi1: i2c@...11000 {
+ compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xd4011000 0x1000>;
+ interrupts = <0 7 0x4>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ twsi2: i2c@...37000 {
+ compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xd4037000 0x1000>;
+ interrupts = <0 54 0x4>;
+ status = "disabled";
+ };
+
+ rtc: rtc@...10000 {
+ compatible = "mrvl,mmp-rtc";
+ reg = <0xd4010000 0x1000>;
+ interrupts = <0 5 0x4>,<0 6 0x4>;
+ interrupt-names = "rtc 1Hz", "rtc alarm";
+ status = "disabled";
+ };
+ pmx: pinmux@...1e000 {
+ compatible = "pinconf-single";
+ reg = <0xd401e000 0x330>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-range-cells = <3>;
+ ranges;
+
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <7>;
+
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index ebdda83..0955191 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -107,6 +107,16 @@ config MACH_MMP2_DT
Include support for Marvell MMP2 based platforms using
the device tree.
+config MACH_MMPX_DT
+ bool "Support no-PJ/PJ4(ARMv7) platforms from device tree"
+ depends on !CPU_MOHAWK && !CPU_PJ4
+ select CPU_PXA988
+ select USE_OF
+ select PINCTRL
+ select PINCTRL_SINGLE
+ help
+ Include support for Marvell MMP2 based platforms using
+ the device tree.
endmenu
config CPU_PXA168
@@ -123,6 +133,23 @@ config CPU_PXA910
help
Select code specific to PXA910
+config CPU_PXA988
+ bool
+ select CPU_V7
+ select ARM_GIC
+ select HAVE_SMP
+ select HAVE_ARM_SCU
+ select LOCAL_TIMERS
+ select HAVE_ARM_TWD
+ select COMMON_CLK
+ select CLKSRC_OF
+ select MIGHT_HAVE_CACHE_L2X0
+ help
+ Say 'Y' here if you want to support the Marvell pxa988-base
+ platforms.
+ PXA988 is an SoC with dual-core Cotex-A9 and comunication
+ processor, code name "Emei".
+
config CPU_MMP2
bool
select COMMON_CLK
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 095c155..e572786 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -8,6 +8,7 @@ obj-y += common.o devices.o time.o irq.o
obj-$(CONFIG_CPU_PXA168) += pxa168.o
obj-$(CONFIG_CPU_PXA910) += pxa910.o
obj-$(CONFIG_CPU_MMP2) += mmp2.o sram.o
+obj-$(CONFIG_CPU_PXA988) += platsmp.o headsmp.o reset.o
ifeq ($(CONFIG_COMMON_CLK), )
obj-y += clock.o
@@ -31,5 +32,6 @@ obj-$(CONFIG_MACH_FLINT) += flint.o
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
obj-$(CONFIG_MACH_MMP_DT) += mmp-dt.o
obj-$(CONFIG_MACH_MMP2_DT) += mmp2-dt.o
+obj-$(CONFIG_MACH_MMPX_DT) += mmpx-dt.o
obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
obj-$(CONFIG_MACH_GPLUGD) += gplugd.o
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index 9292b79..0c621bc 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -11,6 +11,10 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/of_address.h>
#include <asm/page.h>
#include <asm/mach/map.h>
@@ -36,7 +40,12 @@ static struct map_desc standard_io_desc[] __initdata = {
.virtual = (unsigned long)AXI_VIRT_BASE,
.length = AXI_PHYS_SIZE,
.type = MT_DEVICE,
- },
+ }, {
+ .pfn = __phys_to_pfn(MMP_CORE_PERIPH_PHYS_BASE),
+ .virtual = (unsigned long)MMP_CORE_PERIPH_VIRT_BASE,
+ .length = MMP_CORE_PERIPH_PHYS_SIZE,
+ .type = MT_DEVICE,
+ }
};
void __init mmp_map_io(void)
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index 0bdc50b..ea0225f 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -1,5 +1,7 @@
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+extern struct smp_operations mmp_smp_ops;
+
extern void timer_init(int irq);
extern void __init icu_init_irq(void);
diff --git a/arch/arm/mach-mmp/headsmp.S b/arch/arm/mach-mmp/headsmp.S
new file mode 100644
index 0000000..2b6177e
--- /dev/null
+++ b/arch/arm/mach-mmp/headsmp.S
@@ -0,0 +1,104 @@
+/*
+ * linux/arch/arm/mach-mmp/headsmp.S
+ *
+ * Copyright (C) 2012 Marvell, Inc.
+ *
+ * Author: Neil Zhang <zhangwm@...vell.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+#include <asm/cache.h>
+#include <asm/assembler.h>
+#include <mach/addr-map.h>
+
+ __CPUINIT
+
+/*
+ * Marvell specific entry point for secondary CPUs.
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor. We fix this by performing an invalidate, rather than a
+ * clean + invalidate for secondary core, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures.
+ */
+ .align L1_CACHE_SHIFT
+
+
+/*
+ * PXA specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(mmp_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #15
+ adr r4, 1f
+ ldmia r4, {r5, r6}
+ sub r4, r4, r5
+ add r6, r6, r4
+pen: ldr r7, [r6]
+ cmp r7, r0
+ bne pen
+
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(mmp_secondary_startup)
+
+ .align 2
+1: .long .
+ .long pen_release
+
+
+/*
+ * Note: The following code is located into the .data section. This is to
+ * allow sw_reset_flag and cpu_plugin_handler to be accessed with a
+ * relative load while we can't rely on any MMU translation.
+ * Reference from: arch/arm/kernel/sleep.S
+ */
+
+ .data
+ .align
+
+/*
+ * ROM code jumps to this function while waking up from CPU
+ * OFF or software reset state. Physical address of the function is
+ * stored at CA9_WARM_RESET_VECTOR while system is bring up.
+ */
+ENTRY(mmp_cpu_reset_entry)
+ adr r1, mmp_entry_vectors
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #15 @ fetch CPUID
+1:
+ ldr r2, [r1, r0, lsl #2] @ get the handler addr for this core
+ cmp r2, #0
+ movne pc, r2 @ jump to the handler
+ beq 1b
+ENDPROC(mmp_cpu_reset_entry)
+
+ /* Point to the address that save handlers for each core */
+ .global mmp_entry_vectors
+mmp_entry_vectors:
+ .rept CONFIG_NR_CPUS
+ .long 0 @ preserve stack phys ptr here
+ .endr
diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h
index f88a44c..092005b 100644
--- a/arch/arm/mach-mmp/include/mach/addr-map.h
+++ b/arch/arm/mach-mmp/include/mach/addr-map.h
@@ -25,6 +25,10 @@
#define AXI_VIRT_BASE IOMEM(0xfe200000)
#define AXI_PHYS_SIZE 0x00200000
+#define MMP_CORE_PERIPH_PHYS_BASE 0xd1dfe000
+#define MMP_CORE_PERIPH_VIRT_BASE IOMEM(0xfe400000)
+#define MMP_CORE_PERIPH_PHYS_SIZE 0x00002000
+
/* Static Memory Controller - Chip Select 0 and 1 */
#define SMC_CS0_PHYS_BASE 0x80000000
#define SMC_CS0_PHYS_SIZE 0x10000000
@@ -43,4 +47,6 @@
#define CIU_VIRT_BASE (AXI_VIRT_BASE + 0x82c00)
#define CIU_REG(x) (CIU_VIRT_BASE + (x))
+#define SCU_VIRT_BASE (MMP_CORE_PERIPH_VIRT_BASE)
+
#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-mmp/mmpx-dt.c b/arch/arm/mach-mmp/mmpx-dt.c
new file mode 100644
index 0000000..2ebd057
--- /dev/null
+++ b/arch/arm/mach-mmp/mmpx-dt.c
@@ -0,0 +1,74 @@
+/*
+ * linux/arch/arm/mach-mmp/mmpx-dt.c
+ *
+ * Copyright (C) 2012 Marvell Technology Group Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@...vell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/smp_twd.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+#include <mach/regs-apbc.h>
+
+#include "common.h"
+
+/* PXA988 */
+static const struct of_dev_auxdata pxa988_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
+ {}
+};
+
+void __init pxa988_dt_init_timer(void)
+{
+ extern void __init mmp_dt_init_timer(void);
+ /*
+ * Is is a SOC timer, and will be used for broadcasting
+ * when local timers are disabled.
+ */
+ mmp_dt_init_timer();
+
+ clocksource_of_init();
+}
+
+static void __init pxa988_dt_init_machine(void)
+{
+ l2x0_of_init(0x30800000, 0xFE7FFFFF);
+
+ pxa910_clk_init();
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ pxa988_auxdata_lookup, NULL);
+}
+
+static const char *pxa988_dt_board_compat[] __initdata = {
+ "mrvl,pxa988-dkb",
+ NULL,
+};
+
+DT_MACHINE_START(PXA988_DT, "Marvell PXA988 (Device Tree Support)")
+ .smp = smp_ops(mmp_smp_ops),
+ .map_io = mmp_map_io,
+ .init_irq = irqchip_init,
+ .init_time = pxa988_dt_init_timer,
+ .init_machine = pxa988_dt_init_machine,
+ .dt_compat = pxa988_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/platsmp.c b/arch/arm/mach-mmp/platsmp.c
new file mode 100644
index 0000000..5aafde9
--- /dev/null
+++ b/arch/arm/mach-mmp/platsmp.c
@@ -0,0 +1,163 @@
+/*
+ * linux/arch/arm/mach-mmp/platsmp.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <asm/cacheflush.h>
+#include <mach/hardware.h>
+#include <linux/irqchip/arm-gic.h>
+#include <asm/mach-types.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+
+#include <mach/irqs.h>
+#include <mach/addr-map.h>
+
+#include "common.h"
+#include "reset.h"
+
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not. This is necessary for the hotplug code to work reliably.
+ */
+static void __cpuinit write_pen_release(int val)
+{
+ pen_release = val;
+ smp_wmb();
+ __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+ outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
+#ifdef CONFIG_HAVE_ARM_SCU
+static void __iomem *scu_get_base_addr(void)
+{
+ return SCU_VIRT_BASE;
+}
+#endif
+
+static inline unsigned int get_core_count(void)
+{
+ u32 ret = 1;
+#ifdef CONFIG_HAVE_ARM_SCU
+ ret = scu_get_core_count(scu_get_base_addr());
+#endif
+
+ return ret;
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+static void __cpuinit mmp_secondary_init(unsigned int cpu)
+{
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ write_pen_release(-1);
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+static int __cpuinit mmp_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * Avoid timer calibration on slave cpus. Use the value calibrated
+ * on master cpu. Referenced from tegra3
+ */
+ preset_lpj = loops_per_jiffy;
+
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+
+ spin_lock(&boot_lock);
+
+ /*
+ * The secondary processor is waiting to be released from
+ * the holding pen - release it, then wait for it to flag
+ * that it has been released by resetting pen_release.
+ *
+ * Note that "pen_release" is the hardware CPU ID, whereas
+ * "cpu" is Linux's internal ID.
+ */
+ write_pen_release(cpu);
+
+ /* reset the cpu, let it branch to the kernel entry */
+ mmp_cpu_power_up(cpu);
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ smp_rmb();
+ if (pen_release == -1)
+ break;
+
+ udelay(10);
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+static void __init mmp_smp_init_cpus(void)
+{
+ unsigned int i, ncores = get_core_count();
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+}
+
+static void __init mmp_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
+
+ /*
+ * Initialise the present map, which describes the set of CPUs
+ * actually populated at the present time.
+ */
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+
+#ifdef CONFIG_HAVE_ARM_SCU
+ scu_enable(scu_get_base_addr());
+#endif
+
+ mmp_entry_vector_init();
+}
+
+struct smp_operations mmp_smp_ops __initdata = {
+ .smp_init_cpus = mmp_smp_init_cpus,
+ .smp_prepare_cpus = mmp_smp_prepare_cpus,
+ .smp_secondary_init = mmp_secondary_init,
+ .smp_boot_secondary = mmp_boot_secondary,
+};
diff --git a/arch/arm/mach-mmp/reset.c b/arch/arm/mach-mmp/reset.c
new file mode 100644
index 0000000..b47e400
--- /dev/null
+++ b/arch/arm/mach-mmp/reset.c
@@ -0,0 +1,66 @@
+/*
+ * linux/arch/arm/mach-mmp/reset.c
+ *
+ * Author: Neil Zhang <zhangwm@...vell.com>
+ * Copyright: (C) 2012 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
+#include <mach/addr-map.h>
+
+#include "reset.h"
+
+#define PMU_CC2_AP APMU_REG(0x0100)
+#define CIU_CA9_WARM_RESET_VECTOR CIU_REG(0x00d8)
+
+/*
+ * This function is called from boot_secondary to bootup the secondary cpu.
+ */
+void mmp_cpu_power_up(u32 cpu)
+{
+ u32 tmp;
+
+ BUG_ON(cpu == 0);
+
+ tmp = readl(PMU_CC2_AP);
+ if (tmp & CPU_CORE_RST(cpu)) {
+ /* Release secondary core from reset */
+ tmp &= ~(CPU_CORE_RST(cpu)
+ | CPU_DBG_RST(cpu) | CPU_WDOG_RST(cpu));
+ writel(tmp, PMU_CC2_AP);
+ }
+}
+
+void mmp_set_entry_vector(u32 cpu, u32 addr)
+{
+ BUG_ON(cpu >= CONFIG_NR_CPUS);
+
+ mmp_entry_vectors[cpu] = addr;
+ smp_wmb();
+ __cpuc_flush_dcache_area((void *)&mmp_entry_vectors[cpu],
+ sizeof(mmp_entry_vectors[cpu]));
+ outer_clean_range(__pa(&mmp_entry_vectors[cpu]),
+ __pa(&mmp_entry_vectors[cpu + 1]));
+}
+
+void __init mmp_entry_vector_init(void)
+{
+ int cpu;
+
+ /* We will reset from DDR directly by default */
+ writel(__pa(mmp_cpu_reset_entry), CIU_CA9_WARM_RESET_VECTOR);
+
+ for (cpu = 1; cpu < CONFIG_NR_CPUS; cpu++)
+ mmp_set_entry_vector(cpu, __pa(mmp_secondary_startup));
+}
diff --git a/arch/arm/mach-mmp/reset.h b/arch/arm/mach-mmp/reset.h
new file mode 100644
index 0000000..78d5486
--- /dev/null
+++ b/arch/arm/mach-mmp/reset.h
@@ -0,0 +1,29 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/reset.h
+ *
+ * Author: Neil Zhang <zhangwm@...vell.com>
+ * Copyright: (C) 2012 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __RESET_PXA988_H__
+#define __RESET_PXA988_H__
+
+#define CPU_CORE_RST(n) (1 << ((n) * 4 + 16))
+#define CPU_DBG_RST(n) (1 << ((n) * 4 + 18))
+#define CPU_WDOG_RST(n) (1 << ((n) * 4 + 19))
+
+extern u32 mmp_entry_vectors[CONFIG_NR_CPUS];
+
+void mmp_secondary_startup(void);
+void mmp_cpu_reset_entry(void);
+
+void mmp_cpu_power_up(u32 cpu);
+void mmp_set_entry_vector(u32 cpu, u32 addr);
+void __init mmp_entry_vector_init(void);
+
+#endif /* __RESET_PXA988_H__ */
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 392d780..59a3f9f7 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -7,3 +7,4 @@ obj-y += clk-apbc.o clk-apmu.o clk-frac.o
obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
+obj-$(CONFIG_CPU_PXA988) += clk-pxa910.o
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists