linux-kernel - [PATCH v2 2/3] video: xilinxfb: Do not use out

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <a15de155a3f32fc1416833df1b281db05d347541.1369906849.git.michal.simek@xilinx.com>
Date:	Thu, 30 May 2013 11:41:01 +0200
From:	Michal Simek <michal.simek@...inx.com>
To:	linux-kernel@...r.kernel.org
Cc:	Michal Simek <monstr@...str.eu>,
	Michal Simek <michal.simek@...inx.com>,
	Florian Tobias Schandinat <FlorianSchandinat@....de>,
	linux-fbdev@...r.kernel.org
Subject: [PATCH v2 2/3] video: xilinxfb: Do not use out_be32 IO function

out_be32 IO function is not supported by ARM.
It is only available for PPC and Microblaze.

Remove all out_be32 references and start to use __raw_writel
function.

Signed-off-by: Michal Simek <michal.simek@...inx.com>
---
Changes in v2: None

 drivers/video/xilinxfb.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index aecd15d..000185a 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -57,7 +57,7 @@
  * In case of direct PLB access the second control register will be at
  * an offset of 4 as compared to the DCR access where the offset is 1
  * i.e. REG_CTRL. So this is taken care in the function
- * xilinx_fb_out_be32 where it left shifts the offset 2 times in case of
+ * xilinx_fb_out32 where it left shifts the offset 2 times in case of
  * direct PLB access.
  */
 #define NUM_REGS	2
@@ -150,11 +150,11 @@ struct xilinxfb_drvdata {
  * To perform the read/write on the registers we need to check on
  * which bus its connected and call the appropriate write API.
  */
-static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset,
+static void xilinx_fb_out32(struct xilinxfb_drvdata *drvdata, u32 offset,
 				u32 val)
 {
 	if (drvdata->flags & PLB_ACCESS_FLAG)
-		out_be32(drvdata->regs + (offset << 2), val);
+		__raw_writel(val, drvdata->regs + (offset << 2));
 #ifdef CONFIG_PPC_DCR
 	else
 		dcr_write(drvdata->dcr_host, offset, val);
@@ -197,7 +197,7 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
 	switch (blank_mode) {
 	case FB_BLANK_UNBLANK:
 		/* turn on panel */
-		xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
+		xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
 		break;

 	case FB_BLANK_NORMAL:
@@ -205,7 +205,7 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
 	case FB_BLANK_HSYNC_SUSPEND:
 	case FB_BLANK_POWERDOWN:
 		/* turn off panel */
-		xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
+		xilinx_fb_out32(drvdata, REG_CTRL, 0);
 	default:
 		break;

@@ -280,13 +280,13 @@ static int xilinxfb_assign(struct device *dev,
 	memset_io((void __iomem *)drvdata->fb_virt, 0, fbsize);

 	/* Tell the hardware where the frame buffer is */
-	xilinx_fb_out_be32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
+	xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys);

 	/* Turn on the display */
 	drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
 	if (pdata->rotate_screen)
 		drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
-	xilinx_fb_out_be32(drvdata, REG_CTRL,
+	xilinx_fb_out32(drvdata, REG_CTRL,
 					drvdata->reg_ctrl_default);

 	/* Fill struct fb_info */
@@ -345,7 +345,7 @@ err_cmap:
 		iounmap(drvdata->fb_virt);

 	/* Turn off the display */
-	xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
+	xilinx_fb_out32(drvdata, REG_CTRL, 0);

 err_fbmem:
 	if (drvdata->flags & PLB_ACCESS_FLAG)
@@ -381,7 +381,7 @@ static int xilinxfb_release(struct device *dev)
 		iounmap(drvdata->fb_virt);

 	/* Turn off the display */
-	xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
+	xilinx_fb_out32(drvdata, REG_CTRL, 0);

 	/* Release the resources, as allocated based on interface */
 	if (drvdata->flags & PLB_ACCESS_FLAG) {
--
1.8.2.3


Content of type "application/pgp-signature" skipped