| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <f05f284653ddf7d812ba0a6bd0e271736e910a37.1369909618.git.michal.simek@xilinx.com>
Date: Thu, 30 May 2013 12:28:06 +0200
From: Michal Simek <michal.simek@...inx.com>
To: linux-kernel@...r.kernel.org
Cc: Michal Simek <monstr@...str.eu>,
Michal Simek <michal.simek@...inx.com>, renner@...-gmbh.de,
Bill Pemberton <wfp5p@...ginia.edu>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
netdev@...r.kernel.org
Subject: [PATCH v2 4/6] net: emaclite: Do not use microblaze and ppc IO functions
Emaclite can be used on ARM zynq where in_be32/out_be32 IO
functions are not present. Use standard __raw_readl/__raw_writel
IO functions instead.
Signed-off-by: Michal Simek <michal.simek@...inx.com>
---
Changes in v2:
- Fix __raw_iowrite() to pass correct parameters
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 138 +++++++++++++-------------
1 file changed, 69 insertions(+), 69 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 93bb14e..9227ed7 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -159,34 +159,32 @@ static void xemaclite_enable_interrupts(struct net_local *drvdata)
u32 reg_data;
/* Enable the Tx interrupts for the first Buffer */
- reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
- reg_data | XEL_TSR_XMIT_IE_MASK);
+ reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET);
+ __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK,
+ drvdata->base_addr + XEL_TSR_OFFSET);
/* Enable the Tx interrupts for the second Buffer if
* configured in HW */
if (drvdata->tx_ping_pong != 0) {
- reg_data = in_be32(drvdata->base_addr +
+ reg_data = __raw_readl(drvdata->base_addr +
XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_TSR_OFFSET,
- reg_data | XEL_TSR_XMIT_IE_MASK);
+ __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK,
+ drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_TSR_OFFSET);
}
/* Enable the Rx interrupts for the first buffer */
- out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
- XEL_RSR_RECV_IE_MASK);
+ __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET);
/* Enable the Rx interrupts for the second Buffer if
* configured in HW */
if (drvdata->rx_ping_pong != 0) {
- out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET,
- XEL_RSR_RECV_IE_MASK);
+ __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr +
+ XEL_BUFFER_OFFSET + XEL_RSR_OFFSET);
}
/* Enable the Global Interrupt Enable */
- out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
+ __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET);
}
/**
@@ -201,37 +199,37 @@ static void xemaclite_disable_interrupts(struct net_local *drvdata)
u32 reg_data;
/* Disable the Global Interrupt Enable */
- out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
+ __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET);
/* Disable the Tx interrupts for the first buffer */
- reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
- reg_data & (~XEL_TSR_XMIT_IE_MASK));
+ reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET);
+ __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK),
+ drvdata->base_addr + XEL_TSR_OFFSET);
/* Disable the Tx interrupts for the second Buffer
* if configured in HW */
if (drvdata->tx_ping_pong != 0) {
- reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET +
XEL_TSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_TSR_OFFSET,
- reg_data & (~XEL_TSR_XMIT_IE_MASK));
+ __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK),
+ drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_TSR_OFFSET);
}
/* Disable the Rx interrupts for the first buffer */
- reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
- reg_data & (~XEL_RSR_RECV_IE_MASK));
+ reg_data = __raw_readl(drvdata->base_addr + XEL_RSR_OFFSET);
+ __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK),
+ drvdata->base_addr + XEL_RSR_OFFSET);
/* Disable the Rx interrupts for the second buffer
* if configured in HW */
if (drvdata->rx_ping_pong != 0) {
- reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET +
XEL_RSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET,
- reg_data & (~XEL_RSR_RECV_IE_MASK));
+ __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK),
+ drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_RSR_OFFSET);
}
}
@@ -351,7 +349,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
byte_count = ETH_FRAME_LEN;
/* Check if the expected buffer is available */
- reg_data = in_be32(addr + XEL_TSR_OFFSET);
+ reg_data = __raw_readl(addr + XEL_TSR_OFFSET);
if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
XEL_TSR_XMIT_ACTIVE_MASK)) == 0) {
@@ -364,7 +362,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
addr = (void __iomem __force *)((u32 __force)addr ^
XEL_BUFFER_OFFSET);
- reg_data = in_be32(addr + XEL_TSR_OFFSET);
+ reg_data = __raw_readl(addr + XEL_TSR_OFFSET);
if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
XEL_TSR_XMIT_ACTIVE_MASK)) != 0)
@@ -375,15 +373,16 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
/* Write the frame to the buffer */
xemaclite_aligned_write(data, (u32 __force *) addr, byte_count);
- out_be32(addr + XEL_TPLR_OFFSET, (byte_count & XEL_TPLR_LENGTH_MASK));
+ __raw_writel((byte_count & XEL_TPLR_LENGTH_MASK),
+ addr + XEL_TPLR_OFFSET);
/* Update the Tx Status Register to indicate that there is a
* frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which
* is used by the interrupt handler to check whether a frame
* has been transmitted */
- reg_data = in_be32(addr + XEL_TSR_OFFSET);
+ reg_data = __raw_readl(addr + XEL_TSR_OFFSET);
reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK);
- out_be32(addr + XEL_TSR_OFFSET, reg_data);
+ __raw_writel(reg_data, addr + XEL_TSR_OFFSET);
return 0;
}
@@ -408,7 +407,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use);
/* Verify which buffer has valid data */
- reg_data = in_be32(addr + XEL_RSR_OFFSET);
+ reg_data = __raw_readl(addr + XEL_RSR_OFFSET);
if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
if (drvdata->rx_ping_pong != 0)
@@ -425,14 +424,14 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
return 0; /* No data was available */
/* Verify that buffer has valid data */
- reg_data = in_be32(addr + XEL_RSR_OFFSET);
+ reg_data = __raw_readl(addr + XEL_RSR_OFFSET);
if ((reg_data & XEL_RSR_RECV_DONE_MASK) !=
XEL_RSR_RECV_DONE_MASK)
return 0; /* No data was available */
}
/* Get the protocol type of the ethernet frame that arrived */
- proto_type = ((ntohl(in_be32(addr + XEL_HEADER_OFFSET +
+ proto_type = ((ntohl(__raw_readl(addr + XEL_HEADER_OFFSET +
XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) &
XEL_RPLR_LENGTH_MASK);
@@ -441,7 +440,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
if (proto_type == ETH_P_IP) {
- length = ((ntohl(in_be32(addr +
+ length = ((ntohl(__raw_readl(addr +
XEL_HEADER_IP_LENGTH_OFFSET +
XEL_RXBUFF_OFFSET)) >>
XEL_HEADER_SHIFT) &
@@ -463,9 +462,9 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
data, length);
/* Acknowledge the frame */
- reg_data = in_be32(addr + XEL_RSR_OFFSET);
+ reg_data = __raw_readl(addr + XEL_RSR_OFFSET);
reg_data &= ~XEL_RSR_RECV_DONE_MASK;
- out_be32(addr + XEL_RSR_OFFSET, reg_data);
+ __raw_writel(reg_data, addr + XEL_RSR_OFFSET);
return length;
}
@@ -492,14 +491,14 @@ static void xemaclite_update_address(struct net_local *drvdata,
xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN);
- out_be32(addr + XEL_TPLR_OFFSET, ETH_ALEN);
+ __raw_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET);
/* Update the MAC address in the EmacLite */
- reg_data = in_be32(addr + XEL_TSR_OFFSET);
- out_be32(addr + XEL_TSR_OFFSET, reg_data | XEL_TSR_PROG_MAC_ADDR);
+ reg_data = __raw_readl(addr + XEL_TSR_OFFSET);
+ __raw_writel(reg_data | XEL_TSR_PROG_MAC_ADDR, addr + XEL_TSR_OFFSET);
/* Wait for EmacLite to finish with the MAC address update */
- while ((in_be32(addr + XEL_TSR_OFFSET) &
+ while ((__raw_readl(addr + XEL_TSR_OFFSET) &
XEL_TSR_PROG_MAC_ADDR) != 0)
;
}
@@ -669,31 +668,32 @@ static irqreturn_t xemaclite_interrupt(int irq, void *dev_id)
u32 tx_status;
/* Check if there is Rx Data available */
- if ((in_be32(base_addr + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK) ||
- (in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET)
+ if ((__raw_readl(base_addr + XEL_RSR_OFFSET) &
+ XEL_RSR_RECV_DONE_MASK) ||
+ (__raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET)
& XEL_RSR_RECV_DONE_MASK))
xemaclite_rx_handler(dev);
/* Check if the Transmission for the first buffer is completed */
- tx_status = in_be32(base_addr + XEL_TSR_OFFSET);
+ tx_status = __raw_readl(base_addr + XEL_TSR_OFFSET);
if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
(tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
- out_be32(base_addr + XEL_TSR_OFFSET, tx_status);
+ __raw_writel(tx_status, base_addr + XEL_TSR_OFFSET);
tx_complete = true;
}
/* Check if the Transmission for the second buffer is completed */
- tx_status = in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
+ tx_status = __raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
(tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
- out_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET,
- tx_status);
+ __raw_writel(tx_status, base_addr + XEL_BUFFER_OFFSET +
+ XEL_TSR_OFFSET);
tx_complete = true;
}
@@ -726,7 +726,7 @@ static int xemaclite_mdio_wait(struct net_local *lp)
/* wait for the MDIO interface to not be busy or timeout
after some time.
*/
- while (in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET) &
+ while (__raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET) &
XEL_MDIOCTRL_MDIOSTS_MASK) {
if (end - jiffies <= 0) {
WARN_ON(1);
@@ -762,17 +762,17 @@ static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg)
* MDIO Address register. Set the Status bit in the MDIO Control
* register to start a MDIO read transaction.
*/
- ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
- out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
- XEL_MDIOADDR_OP_MASK |
- ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
- out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
- ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+ ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET);
+ __raw_writel(XEL_MDIOADDR_OP_MASK |
+ ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg),
+ lp->base_addr + XEL_MDIOADDR_OFFSET);
+ __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK,
+ lp->base_addr + XEL_MDIOCTRL_OFFSET);
if (xemaclite_mdio_wait(lp))
return -ETIMEDOUT;
- rc = in_be32(lp->base_addr + XEL_MDIORD_OFFSET);
+ rc = __raw_readl(lp->base_addr + XEL_MDIORD_OFFSET);
dev_dbg(&lp->ndev->dev,
"xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n",
@@ -809,13 +809,13 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
* Data register. Finally, set the Status bit in the MDIO Control
* register to start a MDIO write transaction.
*/
- ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
- out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
- ~XEL_MDIOADDR_OP_MASK &
- ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
- out_be32(lp->base_addr + XEL_MDIOWR_OFFSET, val);
- out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
- ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+ ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET);
+ __raw_writel(~XEL_MDIOADDR_OP_MASK &
+ ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg),
+ lp->base_addr + XEL_MDIOADDR_OFFSET);
+ __raw_writel(val, lp->base_addr + XEL_MDIOWR_OFFSET);
+ __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK,
+ lp->base_addr + XEL_MDIOCTRL_OFFSET);
return 0;
}
@@ -872,8 +872,8 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
/* Enable the MDIO bus by asserting the enable bit in MDIO Control
* register.
*/
- out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
- XEL_MDIOCTRL_MDIOEN_MASK);
+ __raw_writel(XEL_MDIOCTRL_MDIOEN_MASK,
+ lp->base_addr + XEL_MDIOCTRL_OFFSET);
bus = mdiobus_alloc();
if (!bus) {
@@ -1197,8 +1197,8 @@ static int xemaclite_of_probe(struct platform_device *ofdev)
dev_warn(dev, "No MAC address found\n");
/* Clear the Tx CSR's in case this is a restart */
- out_be32(lp->base_addr + XEL_TSR_OFFSET, 0);
- out_be32(lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, 0);
+ __raw_writel(0, lp->base_addr + XEL_TSR_OFFSET);
+ __raw_writel(0, lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
/* Set the MAC address in the EmacLite device */
xemaclite_update_address(lp, ndev->dev_addr);
--
1.8.2.3
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists