linux-kernel - [PATCH v3 0/1] i2c: omap: correct usage of the interrupt enable register

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1369988788-23987-1-git-send-email-oleksandr.dmytryshyn@ti.com>
Date:	Fri, 31 May 2013 11:26:27 +0300
From:	Oleksandr Dmytryshyn <oleksandr.dmytryshyn@...com>
To:	Tony Lindgren <tony@...mide.com>, Wolfram Sang <wsa@...-dreams.de>
CC:	<linux-omap@...r.kernel.org>, <linux-i2c@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>
Subject: [PATCH v3 0/1] i2c: omap: correct usage of the interrupt enable register

I've just renamed OMAP_I2C_INTERRUPTS_MASK to the
OMAP_I2C_IP_V2_INTERRUPTS_MASK.

If the i2c controller during suspend will generate an interrupt, it
can lead to unpredictable behaviour in the kernel.

Based on the logic of the kernel code interrupts from i2c should be
prohibited during suspend. Kernel writes 0 to the I2C_IE register in
the omap_i2c_runtime_suspend() function. In the other side kernel
writes saved interrupt flags to the I2C_IE register in
omap_i2c_runtime_resume() function. I.e. interrupts should be disabled
during suspend.

This works for chips with version1 registers scheme. Interrupts are
disabled during suspend. For chips with version2 scheme registers
writting 0 to the I2C_IE register does nothing (because now the
I2C_IRQENABLE_SET register is located at this address). This register
is used to enable interrupts. For disabling interrupts
I2C_IRQENABLE_CLR register should be used.

Because the registers I2C_IRQENABLE_SET and I2C_IE have the same
addresses, the interrupt enabling procedure is unchanged.

I've checked that interrupts in the i2c controller are still enabled
after writting 0 to the I2C_IE register. But with my patch interrupts
are disabled in the omap_i2c_runtime_suspend() function. 

This has been working up until now because we've just been lucky. 

Next patch fixes it.

Patch is based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tag: v3.10-rc2

Verified on OMAP4430.

Oleksandr Dmytryshyn (1):
  i2c: omap: correct usage of the interrupt enable register

 drivers/i2c/busses/i2c-omap.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

-- 
1.8.2.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/