linux-kernel - [PATCH v4 2/7] video: xilinxfb: Do not name out

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <38b90d7403129a10b33641aa71102e38c51bd34a.1370254386.git.michal.simek@xilinx.com>
Date:	Mon,  3 Jun 2013 12:13:17 +0200
From:	Michal Simek <michal.simek@...inx.com>
To:	linux-kernel@...r.kernel.org
Cc:	Michal Simek <monstr@...str.eu>,
	Michal Simek <michal.simek@...inx.com>,
	Arnd Bergmann <arnd@...db.de>, Timur Tabi <timur@...i.org>,
	Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
	Tomi Valkeinen <tomi.valkeinen@...com>,
	linux-fbdev@...r.kernel.org
Subject: [PATCH v4 2/7] video: xilinxfb: Do not name out_be32 in function name

out_be32 IO function is not supported by ARM.
It is only available for PPC and Microblaze.
Because this driver can be used on ARM let's
remove out_be32 from function name.

Signed-off-by: Michal Simek <michal.simek@...inx.com>
---
Changes in v4: None
Changes in v3:
- Remove out_be IO name from function name
- Change patch subject from "Do not use out_be32 IO function"
  to "Do not name out_be32 in function name"

Changes in v2: None

 drivers/video/xilinxfb.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index aecd15d..c9b442b 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -57,7 +57,7 @@
  * In case of direct PLB access the second control register will be at
  * an offset of 4 as compared to the DCR access where the offset is 1
  * i.e. REG_CTRL. So this is taken care in the function
- * xilinx_fb_out_be32 where it left shifts the offset 2 times in case of
+ * xilinx_fb_out32 where it left shifts the offset 2 times in case of
  * direct PLB access.
  */
 #define NUM_REGS	2
@@ -150,7 +150,7 @@ struct xilinxfb_drvdata {
  * To perform the read/write on the registers we need to check on
  * which bus its connected and call the appropriate write API.
  */
-static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset,
+static void xilinx_fb_out32(struct xilinxfb_drvdata *drvdata, u32 offset,
 				u32 val)
 {
 	if (drvdata->flags & PLB_ACCESS_FLAG)
@@ -197,7 +197,7 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
 	switch (blank_mode) {
 	case FB_BLANK_UNBLANK:
 		/* turn on panel */
-		xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
+		xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
 		break;

 	case FB_BLANK_NORMAL:
@@ -205,7 +205,7 @@ xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
 	case FB_BLANK_HSYNC_SUSPEND:
 	case FB_BLANK_POWERDOWN:
 		/* turn off panel */
-		xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
+		xilinx_fb_out32(drvdata, REG_CTRL, 0);
 	default:
 		break;

@@ -280,13 +280,13 @@ static int xilinxfb_assign(struct device *dev,
 	memset_io((void __iomem *)drvdata->fb_virt, 0, fbsize);

 	/* Tell the hardware where the frame buffer is */
-	xilinx_fb_out_be32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
+	xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys);

 	/* Turn on the display */
 	drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
 	if (pdata->rotate_screen)
 		drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
-	xilinx_fb_out_be32(drvdata, REG_CTRL,
+	xilinx_fb_out32(drvdata, REG_CTRL,
 					drvdata->reg_ctrl_default);

 	/* Fill struct fb_info */
@@ -345,7 +345,7 @@ err_cmap:
 		iounmap(drvdata->fb_virt);

 	/* Turn off the display */
-	xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
+	xilinx_fb_out32(drvdata, REG_CTRL, 0);

 err_fbmem:
 	if (drvdata->flags & PLB_ACCESS_FLAG)
@@ -381,7 +381,7 @@ static int xilinxfb_release(struct device *dev)
 		iounmap(drvdata->fb_virt);

 	/* Turn off the display */
-	xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
+	xilinx_fb_out32(drvdata, REG_CTRL, 0);

 	/* Release the resources, as allocated based on interface */
 	if (drvdata->flags & PLB_ACCESS_FLAG) {
--
1.8.2.3


Content of type "application/pgp-signature" skipped