3.6.11.5 stable review patch. If anyone has any objections, please let me know. ------------------ From: Josef Ahmad [ Upstream commit e6f34cea56f5b95498070eaa9f4aa3ba4a9e4f62 ] i2c_dw_xfer_msg() pushes a number of bytes to transmit/receive to/from the bus into the TX FIFO. For master-rx transactions, the maximum amount of data that can be received is calculated depending solely on TX and RX FIFO load. This is racy - TX FIFO may contain master-rx data yet to be processed, which will eventually land into the RX FIFO. This data is not taken into account and the function may request more data than the controller is actually capable of storing. This patch ensures the driver takes into account the outstanding master-rx data in TX FIFO to prevent RX FIFO overrun. Signed-off-by: Josef Ahmad Acked-by: Mika Westerberg Signed-off-by: Wolfram Sang Cc: stable@kernel.org Signed-off-by: Steven Rostedt --- drivers/i2c/busses/i2c-designware-core.c | 11 ++++++++++- drivers/i2c/busses/i2c-designware-core.h | 2 ++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 7b8ebbe..37b1221 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -413,8 +413,14 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) { if (msgs[dev->msg_write_idx].flags & I2C_M_RD) { + + /* avoid rx buffer overrun */ + if (rx_limit - dev->rx_outstanding <= 0) + break; + dw_writel(dev, 0x100, DW_IC_DATA_CMD); rx_limit--; + dev->rx_outstanding++; } else dw_writel(dev, *buf++, DW_IC_DATA_CMD); tx_limit--; buf_len--; @@ -467,8 +473,10 @@ i2c_dw_read(struct dw_i2c_dev *dev) rx_valid = dw_readl(dev, DW_IC_RXFLR); - for (; len > 0 && rx_valid > 0; len--, rx_valid--) + for (; len > 0 && rx_valid > 0; len--, rx_valid--) { *buf++ = dw_readl(dev, DW_IC_DATA_CMD); + dev->rx_outstanding--; + } if (len > 0) { dev->status |= STATUS_READ_IN_PROGRESS; @@ -526,6 +534,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) dev->msg_err = 0; dev->status = STATUS_IDLE; dev->abort_source = 0; + dev->rx_outstanding = 0; ret = i2c_dw_wait_bus_not_busy(dev); if (ret < 0) diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 9c1840e..e761ad1 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -60,6 +60,7 @@ * @adapter: i2c subsystem adapter node * @tx_fifo_depth: depth of the hardware tx fifo * @rx_fifo_depth: depth of the hardware rx fifo + * @rx_outstanding: current master-rx elements in tx fifo */ struct dw_i2c_dev { struct device *dev; @@ -88,6 +89,7 @@ struct dw_i2c_dev { u32 master_cfg; unsigned int tx_fifo_depth; unsigned int rx_fifo_depth; + int rx_outstanding; }; #define ACCESS_SWAP 0x00000001 -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/