lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Tue, 4 Jun 2013 15:49:01 +0200 From: Nicolas Ferre <nicolas.ferre@...el.com> To: Arnd Bergmann <arnd@...db.de>, Alexandre Belloni <alexandre.belloni@...e-electrons.com>, Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com> CC: <linux-arm-kernel@...ts.infradead.org>, Ludovic Desroches <ludovic.desroches@...el.com>, <linux-kernel@...r.kernel.org> Subject: Re: [PATCH v3] ARM: at91: Fix link breakage when !CONFIG_PHYLIB On 27/05/2013 14:42, Arnd Bergmann : > On Monday 27 May 2013 14:05:13 Nicolas Ferre wrote: >> On 27/05/2013 12:48, Alexandre Belloni : >> A v3 is not needed simply for this. Thanks, anyway! >> >> One question though: why not just add >> >> select PHYLIB >> >> In Kconfig entry: >> >> config MACH_SAMA5_DT >> >> ? >> >> (note that I like to play with everybody's nerves ;-)) > > That would make it impossible to build a sama5 kernel without networking > support, which is probably not what you want. > > Jean-Christophe's suggestion to add the inline helper is best. It seems that it has been clearly rejected by David. So the best solution remains to... > Aside from > that, please note that > >>> diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c >>> index 705305e..e9ce541 100644 >>> --- a/arch/arm/mach-at91/board-dt-sama5.c >>> +++ b/arch/arm/mach-at91/board-dt-sama5.c >>> @@ -47,22 +47,24 @@ static int ksz9021rn_phy_fixup(struct phy_device *phy) >>> #define GMII_ERCR 11 >>> #define GMII_ERDWR 12 >>> >>> - /* Set delay values */ >>> - value = GMII_RCCPSR | 0x8000; >>> - phy_write(phy, GMII_ERCR, value); >>> - value = 0xF2F4; >>> - phy_write(phy, GMII_ERDWR, value); >>> - value = GMII_RRDPSR | 0x8000; >>> - phy_write(phy, GMII_ERCR, value); >>> - value = 0x2222; >>> - phy_write(phy, GMII_ERDWR, value); >>> + if (IS_BUILTIN(CONFIG_PHYLIB)) { >>> + /* Set delay values */ >>> + value = GMII_RCCPSR | 0x8000; >>> + phy_write(phy, GMII_ERCR, value); >>> + value = 0xF2F4; >>> + phy_write(phy, GMII_ERDWR, value); >>> + value = GMII_RRDPSR | 0x8000; >>> + phy_write(phy, GMII_ERCR, value); >>> + value = 0x2222; >>> + phy_write(phy, GMII_ERDWR, value); >>> + } >>> >>> return 0; >>> } > > This part of the patch is not actually needed if you > >>> static void __init sama5_dt_device_init(void) >>> { >>> - if (of_machine_is_compatible("atmel,sama5d3xcm")) >>> + if (of_machine_is_compatible("atmel,sama5d3xcm") && IS_BUILTIN(CONFIG_PHYLIB)) >>> phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, >>> ksz9021rn_phy_fixup); > > do this change, or the inline helper. ... simply use this "IS_BUILTIN(CONFIG_PHYLIB)" here -----^^^^^^^^^ (and not above as suggested by Arnd). Jean-Christophe, Alexandre: do you agree with this conclusion? I plan to stack this patch for next at91-fixes batch. Bye, -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists