| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130608172940.GB10180@dell.arpanet.local>
Date: Sat, 8 Jun 2013 19:29:41 +0200
From: Jon Arne Jørgensen <jonarne@...arne.no>
To: Hans Verkuil <hverkuil@...all.nl>
Cc: Jon Arne Jørgensen <jonarne@...arne.no>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
mchehab@...hat.com, hans.verkuil@...co.com,
prabhakar.csengg@...il.com, g.liakhovetski@....de,
ezequiel.garcia@...e-electrons.com, timo.teras@....fi
Subject: Re: [RFC v2 1/2] saa7115: Implement i2c_board_info.platform_data
On Fri, Jun 07, 2013 at 11:12:47AM +0200, Hans Verkuil wrote:
> On Fri May 31 2013 13:40:25 Jon Arne Jørgensen wrote:
> > Implement i2c_board_info.platform_data handling in the driver so we can
> > make device specific changes to the chips we support.
> >
> > Signed-off-by: Jon Arne Jørgensen <jonarne@...arne.no>
> > ---
> > drivers/media/i2c/saa7115.c | 101 +++++++++++++++++++++++++++++++++++++--
> > drivers/media/i2c/saa711x_regs.h | 8 ++++
> > include/media/saa7115.h | 39 +++++++++++++++
> > 3 files changed, 143 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
> > index d6f589a..4a52b4d 100644
> > --- a/drivers/media/i2c/saa7115.c
> > +++ b/drivers/media/i2c/saa7115.c
> > @@ -216,10 +216,7 @@ static const unsigned char saa7111_init[] = {
> > 0x00, 0x00
> > };
> >
> > -/* SAA7113/GM7113C init codes
> > - * It's important that R_14... R_17 == 0x00
> > - * for the gm7113c chip to deliver stable video
> > - */
> > +/* SAA7113/GM7113C init codes */
> > static const unsigned char saa7113_init[] = {
> > R_01_INC_DELAY, 0x08,
> > R_02_INPUT_CNTL_1, 0xc2,
> > @@ -248,6 +245,35 @@ static const unsigned char saa7113_init[] = {
> > 0x00, 0x00
> > };
> >
> > +/* SAA7113 Init according to the datasheet */
> > +static const unsigned char saa7113_datasheet_init[] = {
> > + R_01_INC_DELAY, 0x08,
> > + R_02_INPUT_CNTL_1, 0xc0,
> > + R_03_INPUT_CNTL_2, 0x33,
> > + R_04_INPUT_CNTL_3, 0x00,
> > + R_05_INPUT_CNTL_4, 0x00,
> > + R_06_H_SYNC_START, 0xe9,
> > + R_07_H_SYNC_STOP, 0x0d,
> > + R_08_SYNC_CNTL, 0x98,
> > + R_09_LUMA_CNTL, 0x01,
> > + R_0A_LUMA_BRIGHT_CNTL, 0x80,
> > + R_0B_LUMA_CONTRAST_CNTL, 0x47,
> > + R_0C_CHROMA_SAT_CNTL, 0x40,
> > + R_0D_CHROMA_HUE_CNTL, 0x00,
> > + R_0E_CHROMA_CNTL_1, 0x01,
> > + R_0F_CHROMA_GAIN_CNTL, 0x2a,
> > + R_10_CHROMA_CNTL_2, 0x00,
> > + R_11_MODE_DELAY_CNTL, 0x0c,
> > + R_12_RT_SIGNAL_CNTL, 0x01,
> > + R_13_RT_X_PORT_OUT_CNTL, 0x00,
> > + R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
> > + R_15_VGATE_START_FID_CHG, 0x00,
> > + R_16_VGATE_STOP, 0x00,
> > + R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
> > +
> > + 0x00, 0x00
> > +};
> > +
> > /* If a value differs from the Hauppauge driver values, then the comment starts with
> > 'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the
> > Hauppauge driver sets. */
> > @@ -1603,6 +1629,64 @@ static const struct v4l2_subdev_ops saa711x_ops = {
> > };
> >
> > /* ----------------------------------------------------------------------- */
> > +static void saa711x_write_platform_data(struct saa711x_state *state,
> > + struct saa7115_platform_data *data)
> > +{
> > + struct v4l2_subdev *sd = &state->sd;
> > + u8 work;
> > +
> > + if (state->ident != V4L2_IDENT_GM7113C)
> > + return;
> > +
> > + if (data->horizontal_time_const) {
> > + work = saa711x_read(sd, R_08_SYNC_CNTL);
> > + work &= ~SAA7113_R_08_HTC_MASK;
> > + work |= ((data->horizontal_time_const >> 1) << 3);
> > + v4l2_dbg(1, debug, sd,
> > + "set R_08 horizontal_time_const: 0x%x\n", work);
> > + saa711x_write(sd, R_08_SYNC_CNTL, work);
> > + }
> > +
> > + if (data->vref_len) {
> > + work = saa711x_read(sd, R_10_CHROMA_CNTL_2);
> > + work &= ~SAA7113_R_10_VRLN_MASK;
> > + work |= (1 << 3);
> > + v4l2_dbg(1, debug, sd, "set R_10 vref_len: 0x%x\n", work);
> > + saa711x_write(sd, R_10_CHROMA_CNTL_2, work);
> > + }
> > +
> > + if (data->output_format != SAA7113_OFTS_STD_ITU_656) {
> > + work = saa711x_read(sd, R_10_CHROMA_CNTL_2);
> > + work &= ~SAA7113_R_10_OFTS_MASK;
> > + work |= (data->output_format << 6);
> > + v4l2_dbg(1, debug, sd, "set R_10 output_format: 0x%x\n", work);
> > + saa711x_write(sd, R_10_CHROMA_CNTL_2, work);
> > + }
> > +
> > + if (data->rt_signal0) {
> > + work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL);
> > + work &= ~SAA7113_R_12_RTS0_MASK;
> > + work |= data->rt_signal0;
> > + v4l2_dbg(1, debug, sd, "set R_12 rt_signal0: 0x%x\n", work);
> > + saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work);
> > + }
> > +
> > + if (data->rt_signal1) {
> > + work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL);
> > + work &= ~SAA7113_R_12_RTS1_MASK;
> > + work |= (data->rt_signal1 << 4);
> > + v4l2_dbg(1, debug, sd, "set R_12 rt_signal1: 0x%x\n", work);
> > + saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work);
> > + }
> > +
> > + if (data->adc_lsb) {
> > + work = saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL);
> > + work &= ~SAA7113_R_13_ADLSB_MASK;
> > + work |= (1 << 7);
> > + v4l2_dbg(1, debug, sd, "set R_13 adc_lsb: 0x%x\n", work);
> > + saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL, work);
> > + }
> > +}
> >
> > /**
> > * saa711x_detect_chip - Detects the saa711x (or clone) variant
> > @@ -1782,7 +1866,10 @@ static int saa711x_probe(struct i2c_client *client,
> > break;
> > case V4L2_IDENT_GM7113C:
> > case V4L2_IDENT_SAA7113:
> > - saa711x_writeregs(sd, saa7113_init);
> > + if (client->dev.platform_data)
> > + saa711x_writeregs(sd, saa7113_datasheet_init);
> > + else
> > + saa711x_writeregs(sd, saa7113_init);
> > break;
> > default:
> > state->crystal_freq = SAA7115_FREQ_32_11_MHZ;
> > @@ -1790,6 +1877,10 @@ static int saa711x_probe(struct i2c_client *client,
> > }
> > if (state->ident > V4L2_IDENT_SAA7111A)
> > saa711x_writeregs(sd, saa7115_init_misc);
> > +
> > + if (client->dev.platform_data)
> > + saa711x_write_platform_data(state, client->dev.platform_data);
> > +
> > saa711x_set_v4lstd(sd, V4L2_STD_NTSC);
> > v4l2_ctrl_handler_setup(hdl);
> >
> > diff --git a/drivers/media/i2c/saa711x_regs.h b/drivers/media/i2c/saa711x_regs.h
> > index 4e5f2eb..57918fe 100644
> > --- a/drivers/media/i2c/saa711x_regs.h
> > +++ b/drivers/media/i2c/saa711x_regs.h
> > @@ -201,6 +201,14 @@
> > #define R_FB_PULSE_C_POS_MSB 0xfb
> > #define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES 0xff
> >
> > +/* SAA7113 bit-masks */
> > +#define SAA7113_R_08_HTC_MASK (0x3 << 3)
> > +#define SAA7113_R_10_VRLN_MASK (0x1 << 3)
> > +#define SAA7113_R_10_OFTS_MASK (0x3 << 6)
> > +#define SAA7113_R_12_RTS0_MASK (0xf << 0)
> > +#define SAA7113_R_12_RTS1_MASK (0xf << 4)
> > +#define SAA7113_R_13_ADLSB_MASK (0x1 << 7)
> > +
> > #if 0
> > /* Those structs will be used in the future for debug purposes */
> > struct saa711x_reg_descr {
> > diff --git a/include/media/saa7115.h b/include/media/saa7115.h
> > index 4079186..d7e1f5a 100644
> > --- a/include/media/saa7115.h
> > +++ b/include/media/saa7115.h
> > @@ -64,5 +64,44 @@
> > #define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */
> > #define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only */
> >
> > +enum saa7113_output_format {
> > + SAA7113_OFTS_STD_ITU_656 = 0x0,
> > + SAA7113_OFTS_VFLAG_BY_VREF = 0x1,
> > + SAA7113_OFTS_VFLAG_BY_DATA_TYPE = 0x2
> > +};
> > +
> > +enum saa7113_horizontal_time_const {
> > + SAA7113_HTC_TV_MODE = 0x1,
> > + SAA7113_HTC_VTR_MODE = 0x3,
> > + SAA7113_HTC_FAST_LOCKING_MODE = 0x7
> > +};
> > +
> > +enum saa7113_rt_signal_cntl {
> > + SAA7113_RTS_ADC_LSB = 0x1,
> > + SAA7113_RTS_GPSW,
> > + SAA7115_RTS_HL,
> > + SAA7113_RTS_VL,
> > + SAA7113_RTS0_DL,
> > + SAA7113_RTS0_PLIN,
> > + SAA7113_RTS0_HREF_HS,
> > + SAA7113_RTS0_HS,
> > + SAA7113_RTS0_HQ,
> > + SAA7113_RTS0_ODD,
> > + SAA7113_RTS0_VS,
> > + SAA7113_RTS0_V123,
> > + SAA7113_RTS0_VGATE,
> > + SAA7113_RTS0_VREF,
> > + SAA7113_RTS0_FID
> > +};
> > +
> > +struct saa7115_platform_data {
> > + bool vref_len;
> > + bool adc_lsb;
> > + enum saa7113_output_format output_format;
> > + enum saa7113_horizontal_time_const horizontal_time_const;
> > + enum saa7113_rt_signal_cntl rt_signal0;
> > + enum saa7113_rt_signal_cntl rt_signal1;
> > +};
>
> Please add comments to the various enums and the struct. It should at least
> refer to the relevant registers in the datasheet and what the default is if
> no pdata is supplied. It is also important to mention which fields are
> saa7113 specific, and which are more generic.
>
Ok, will do.
> I also don't really like the idea of having a second initialization table.
> I prefer that any changes necessary are added to the platform_data. Right
> now specifying pdata has an unexpected side-effect of changing more than
> just what is set in the platform data.
>
You are probably right.
It's just that some of the defaults in the original initialization table
are really strange.
For example R_06 which is set to 0x89 in the table, while the datasheet claims
this value is illegal.
And in register 0x08, "Horizontal time constant" is set to "VTR-mode",
while the datasheet clearly states that the recommended
value is "Fast locking mode".
It's annoying, but I can probably work around my OCD :)
> I know it is a lot of work, but this driver is used in many devices, so we
> have to be careful making changes to it.
>
I do my best to only add new functions/code-paths for the gm7113c chip,
and not touch on the code that's already there.
I'll spin a new patch with more comments, and I'll remove the separate
init table.
And thanks again for the review.
Best regards,
Jon Arne Jørgensen
> Regards,
>
> Hans
>
> > +
> > #endif
> >
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists