| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1370935072-21056-3-git-send-email-ravibabu@ti.com>
Date: Tue, 11 Jun 2013 12:47:47 +0530
From: Ravi Babu <ravibabu@...com>
To: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <balbi@...com>, Ravi Babu <ravibabu@...com>
Subject: [PATCH v2 2/7] usb: phy: dsps: adding usbphy driver for am33xx platform
Adds usb-phy driver support for am33xx platform, the host/device
peripheral controller shall get this phy object to control the phy
operations.
Signed-off-by: Ravi Babu <ravibabu@...com>
---
drivers/usb/phy/Kconfig | 9 ++
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy-dsps-usb.c | 236 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 246 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/phy/phy-dsps-usb.c
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 372db48..b55c265 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -85,6 +85,15 @@ config OMAP_USB3
This driver interacts with the "OMAP Control USB Driver" to power
on/off the PHY.
+config DSPS_USB2PHY
+ tristate "DSPS USB2 PHY Driver"
+ depends on SOC_AM33XX
+ help
+ Enable this to support the transceiver that is part of SOC. This
+ phy supports all LS/FS/HS speed and also supports OTG functionality.
+ The USB OTG controller communicates with this phy through stand UTMI
+ interface.
+
config SAMSUNG_USBPHY
tristate "Samsung USB PHY Driver"
help
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 33863c0..0b16fb3 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_NOP_USB_XCEIV) += phy-nop.o
obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o
+obj-$(CONFIG_DSPS_USB2PHY) += phy-dsps-usb.o
obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o
obj-$(CONFIG_SAMSUNG_USB2PHY) += phy-samsung-usb2.o
obj-$(CONFIG_SAMSUNG_USB3PHY) += phy-samsung-usb3.o
diff --git a/drivers/usb/phy/phy-dsps-usb.c b/drivers/usb/phy/phy-dsps-usb.c
new file mode 100644
index 0000000..aae97b3
--- /dev/null
+++ b/drivers/usb/phy/phy-dsps-usb.c
@@ -0,0 +1,236 @@
+/*
+ * phy-dsps-usb.c - TI gs70 based usb phy driver used by usb controller
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/usb/omap_usb.h>
+#include <linux/usb/phy_companion.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+#include <linux/usb/phy.h>
+
+struct dsps_phy {
+ struct usb_phy phy;
+ struct device *dev;
+ struct platform_device *pdev;
+ void __iomem *phy_ctrl;
+ void __iomem *phy_wkup;
+ u8 is_suspended:1;
+ int id;
+};
+
+#define DSPS_USBPHY_CM_PWRDN (1 << 0)
+#define DSPS_USBPHY_OTG_PWRDN (1 << 1)
+#define DSPS_USBPHY_OTGVDET_EN (1 << 19)
+#define DSPS_USBPHY_OTGSESSEND_EN (1 << 20)
+#define DSPS_USB0_WKUP_CTRL_ENABLE (1 << 0)
+#define DSPS_USB1_WKUP_CTRL_ENABLE (1 << 8)
+#define phy_to_dspsphy(x) container_of((x), struct dsps_phy, phy)
+
+static void dsps_usbphy_power(struct usb_phy *phy, bool is_on)
+{
+ struct dsps_phy *dsps_phy = phy_to_dspsphy(phy);
+ u32 val;
+
+ val = readl(dsps_phy->phy_ctrl);
+
+ if (is_on) {
+ val &= ~(DSPS_USBPHY_CM_PWRDN | DSPS_USBPHY_OTG_PWRDN);
+ val |= DSPS_USBPHY_OTGVDET_EN |
+ DSPS_USBPHY_OTGSESSEND_EN;
+ } else
+ val |= DSPS_USBPHY_CM_PWRDN | DSPS_USBPHY_OTG_PWRDN;
+
+ writel(val, dsps_phy->phy_ctrl);
+}
+
+static void dsps_usbphy_wakeup(struct usb_phy *phy, bool enable)
+{
+ struct dsps_phy *dsps_phy = phy_to_dspsphy(phy);
+ int id = dsps_phy->id;
+ u32 val, wkup_flag;
+
+ val = readl(dsps_phy->phy_wkup);
+ wkup_flag = id ? DSPS_USB1_WKUP_CTRL_ENABLE :
+ DSPS_USB0_WKUP_CTRL_ENABLE;
+
+ if (enable)
+ val |= wkup_flag;
+ else
+ val &= ~wkup_flag;
+
+ writel(val, dsps_phy->phy_wkup);
+}
+
+static int dsps_usbphy_suspend(struct usb_phy *x, int suspend)
+{
+ struct dsps_phy *dsps_phy = phy_to_dspsphy(x);
+
+ if (suspend) {
+ if (!pm_runtime_suspended(&dsps_phy->pdev->dev))
+ pm_runtime_put(&dsps_phy->pdev->dev);
+ } else if (!suspend)
+ pm_runtime_get(&dsps_phy->pdev->dev);
+
+ return 0;
+}
+
+static int dsps_usbphy_init(struct usb_phy *phy)
+{
+ /* enable the phy */
+ dsps_usbphy_power(phy, 1);
+
+ return 0;
+}
+
+static void dsps_usbphy_shutdown(struct usb_phy *phy)
+{
+ /* disable the phy */
+ dsps_usbphy_power(phy, 0);
+}
+
+static int dsps_usbphy_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct dsps_phy *phy;
+ struct usb_otg *otg;
+ struct resource *res;
+
+ phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n");
+ return -ENOMEM;
+ }
+
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg) {
+ dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
+ return -ENOMEM;
+ }
+
+ phy->dev = &pdev->dev;
+ phy->pdev = pdev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
+ phy->phy_ctrl = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(phy->phy_ctrl))
+ return PTR_ERR(phy->phy_ctrl);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_wkup");
+ phy->phy_wkup = ioremap(res->start, resource_size(res));
+ if (IS_ERR(phy->phy_wkup))
+ return PTR_ERR(phy->phy_wkup);
+
+ if (np)
+ of_property_read_u32(np, "id", &phy->id);
+
+ phy->phy.dev = phy->dev;
+ phy->phy.label = "dsps-usbphy";
+ phy->phy.otg = otg;
+ phy->phy.type = USB_PHY_TYPE_USB2;
+ phy->phy.init = dsps_usbphy_init;
+ phy->phy.shutdown = dsps_usbphy_shutdown;
+ phy->phy.set_suspend = dsps_usbphy_suspend;
+ otg->phy = &phy->phy;
+
+ usb_add_phy_dev(&phy->phy);
+
+ platform_set_drvdata(pdev, phy);
+
+ pm_runtime_enable(phy->dev);
+
+ return 0;
+}
+
+static int dsps_usbphy_remove(struct platform_device *pdev)
+{
+ struct dsps_phy *phy = platform_get_drvdata(pdev);
+
+ dsps_usbphy_power(&phy->phy, 0);
+ iounmap(phy->phy_wkup);
+ usb_remove_phy(&phy->phy);
+
+ if (!pm_runtime_suspended(&pdev->dev))
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+
+static int dsps_usbphy_runtime_suspend(struct device *dev)
+{
+ struct dsps_phy *dsps_phy = dev_get_drvdata(dev);
+
+ /* suspend usb-phy */
+ dsps_usbphy_power(&dsps_phy->phy, 0);
+ dsps_phy->is_suspended = 1;
+
+ return 0;
+}
+
+static int dsps_usbphy_runtime_resume(struct device *dev)
+{
+ struct dsps_phy *dsps_phy = dev_get_drvdata(dev);
+
+ /* resume usb-phy */
+ dsps_usbphy_power(&dsps_phy->phy, 1);
+ dsps_phy->is_suspended = 0;
+
+ return 0;
+}
+
+static const struct dev_pm_ops dsps_usbphy_pm_ops = {
+ SET_RUNTIME_PM_OPS(dsps_usbphy_runtime_suspend,
+ dsps_usbphy_runtime_resume, NULL)
+};
+
+#define DEV_PM_OPS (&dsps_usbphy_pm_ops)
+#else
+#define DEV_PM_OPS NULL
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id dsps_usbphy_id_table[] = {
+ { .compatible = "ti,dsps-usbphy" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, dsps_usbphy_id_table);
+#endif
+
+static struct platform_driver dsps_usbphy_driver = {
+ .probe = dsps_usbphy_probe,
+ .remove = dsps_usbphy_remove,
+ .driver = {
+ .name = "dsps-usbphy",
+ .owner = THIS_MODULE,
+ .pm = DEV_PM_OPS,
+ .of_match_table = of_match_ptr(dsps_usbphy_id_table),
+ },
+};
+
+module_platform_driver(dsps_usbphy_driver);
+
+MODULE_ALIAS("platform: dsps_usbphy");
+MODULE_AUTHOR("Ravi Babu <ravibabu@...com>");
+MODULE_DESCRIPTION("dsps USB2 phy driver");
+MODULE_LICENSE("GPL v2");
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists