| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1371025140-25376-1-git-send-email-j-keerthy@ti.com>
Date: Wed, 12 Jun 2013 13:49:00 +0530
From: J Keerthy <j-keerthy@...com>
To: <b-cousson@...com>, <devicetree-discuss@...ts.ozlabs.org>
CC: <linux-omap@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<ldewangan@...dia.com>, <grant.likely@...retlab.ca>,
<swarren@...dotorg.org>, <swarren@...dia.com>,
<sameo@...ux.intel.com>, <gg@...mlogic.co.uk>,
<lee.jones@...aro.org>, J Keerthy <j-keerthy@...com>
Subject: [PATCH v4] ARM: dts: OMAP5: Add palmas MFD node and regulator nodes
This patch adds Palmas MFD node and the regulator nodes for OMAP5.
The node definitions are based on: https://lkml.org/lkml/2013/6/6/25
Boot tested on omap5-uevm board.
Signed-off-by: Graeme Gregory <gg@...mlogic.co.uk>
Signed-off-by: J Keerthy <j-keerthy@...com>
---
arch/arm/boot/dts/omap5-uevm.dts | 167 ++++++++++++++++++++++++++++++++++++++
1 files changed, 167 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 927db1e..3d0b7b6 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -8,6 +8,8 @@
/dts-v1/;
#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
model = "TI OMAP5 uEVM board";
@@ -254,6 +256,171 @@
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
+
+ palmas: palmas@48 {
+ reg = <0x48>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N */
+ interrupt-parent = <&gic>;
+ compatible = "ti,palmas";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ palmas_pmic {
+ compatible = "ti,palmas-pmic";
+ interrupt-parent = <&palmas>;
+ interrupts = <14 IRQ_TYPE_NONE>;
+ interrupt-name = "short-irq";
+
+ ti,ldo6-vibrator;
+
+ regulators {
+ smps123_reg: smps123 {
+ regulator-name = "smps123";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ regulator-name = "smps6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ regulator-name = "smps7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ regulator-name = "smps9";
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,smps-range = <0x80>;
+ };
+
+ smps10_reg: smps10 {
+ regulator-name = "smps10";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "ldo8";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
};
&i2c5 {
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists