| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1371029027-9100-3-git-send-email-george.cherian@ti.com>
Date: Wed, 12 Jun 2013 14:53:46 +0530
From: George Cherian <george.cherian@...com>
To: <linux-usb@...r.kernel.org>
CC: <balbi@...com>, <linux-omap@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <gregkh@...uxfoundation.org>,
George Cherian <george.cherian@...com>
Subject: [PATCH v2 2/3] usb: dwc3: omap: Intialize the register offset values for OMAP5 and AM437x
This patch Initializes the register offset values depending
on the X_MAJOR of USBOTGSS_REVISION register. Also adds register
offset defines and new debug register defines.
X_MAJOR is 2 for both OMAP5 and AM437x. But both have different glue register
layout. Differentiate AM437x using dt compatible.
Register offsets are cached in dwc3_omap struct for reg reads and writes.
Signed-off-by: George Cherian <george.cherian@...com>
---
drivers/usb/dwc3/dwc3-omap.c | 57 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index a354b4c..f204d18 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -61,21 +61,38 @@
#define USBOTGSS_REVISION 0x0000
#define USBOTGSS_SYSCONFIG 0x0010
#define USBOTGSS_IRQ_EOI 0x0020
+#define USBOTGSS_EOI_OFFSET 0x0008
#define USBOTGSS_IRQSTATUS_RAW_0 0x0024
#define USBOTGSS_IRQSTATUS_0 0x0028
#define USBOTGSS_IRQENABLE_SET_0 0x002c
#define USBOTGSS_IRQENABLE_CLR_0 0x0030
+#define USBOTGSS_IRQ0_OFFSET 0x0004
#define USBOTGSS_IRQSTATUS_RAW_1 0x0034
#define USBOTGSS_IRQSTATUS_1 0x0038
#define USBOTGSS_IRQENABLE_SET_1 0x003c
#define USBOTGSS_IRQENABLE_CLR_1 0x0040
+#define USBOTGSS_IRQSTATUS_EOI_MISC 0x0030
+#define USBOTGSS_IRQSTATUS_RAW_MISC 0x0034
+#define USBOTGSS_IRQSTATUS_MISC 0x0038
+#define USBOTGSS_IRQENABLE_SET_MISC 0x003c
+#define USBOTGSS_IRQENABLE_CLR_MISC 0x0040
+#define USBOTGSS_IRQMISC_OFFSET 0x03fc
#define USBOTGSS_UTMI_OTG_CTRL 0x0080
#define USBOTGSS_UTMI_OTG_STATUS 0x0084
+#define USBOTGSS_UTMI_OTG_OFFSET 0x0480
+#define USBOTGSS_TXFIFO_DEPTH 0x0508
+#define USBOTGSS_RXFIFO_DEPTH 0x050c
#define USBOTGSS_MMRAM_OFFSET 0x0100
#define USBOTGSS_FLADJ 0x0104
#define USBOTGSS_DEBUG_CFG 0x0108
#define USBOTGSS_DEBUG_DATA 0x010c
+#define USBOTGSS_DEV_EBC_EN 0x0110
+#define USBOTGSS_DEBUG_OFFSET 0x0600
+/* REVISION REGISTER */
+#define USBOTGSS_REVISION_XMAJOR(reg) ((reg >> 8) & 0x7)
+#define USBOTGSS_REVISION_XMAJOR1 1
+#define USBOTGSS_REVISION_XMAJOR2 2
/* SYSCONFIG REGISTER */
#define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16)
@@ -300,6 +317,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
int irq;
int utmi_mode = 0;
+ int x_major;
u32 reg;
@@ -356,6 +374,42 @@ static int dwc3_omap_probe(struct platform_device *pdev)
return ret;
}
+ reg = dwc3_omap_readl(omap->base, USBOTGSS_REVISION);
+ omap->revision = reg;
+ x_major = USBOTGSS_REVISION_XMAJOR(reg);
+
+ /* Differentiate between OMAP5,AM437x and others*/
+ switch (x_major) {
+ case USBOTGSS_REVISION_XMAJOR1:
+ case USBOTGSS_REVISION_XMAJOR2:
+ omap->irq_eoi_offset = 0;
+ omap->irq0_offset = 0;
+ omap->irqmisc_offset = 0;
+ omap->utmi_otg_offset = 0;
+ omap->debug_offset = 0;
+ break;
+ default:
+ /* Default to the latest revision */
+ omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
+ omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
+ omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
+ omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
+ omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
+ break;
+ }
+
+ /* For OMAP5(ES2.0) and AM437x x_major is 2 even though there are
+ * changes in wrapper registers, Using dt compatible for aegis
+ */
+
+ if (of_device_is_compatible(node, "ti,am437x-dwc3")) {
+ omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
+ omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
+ omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
+ omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
+ omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
+ }
+
reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
of_property_read_u32(node, "utmi-mode", &utmi_mode);
@@ -412,6 +466,9 @@ static const struct of_device_id of_dwc3_match[] = {
{
.compatible = "ti,dwc3"
},
+ {
+ .compatible = "ti,am437x-dwc3"
+ },
{ },
};
MODULE_DEVICE_TABLE(of, of_dwc3_match);
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists