| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1371131025-12200-5-git-send-email-maxime.ripard@free-electrons.com>
Date: Thu, 13 Jun 2013 15:43:45 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Shawn Guo <shawn.guo@...aro.org>
Cc: Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Brian Lilly <brian@...stalfontz.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>
Subject: [PATCH 4/4] ARM: mxs: dt: Add Crystalfontz CFA-10057 device tree
From: Brian Lilly <brian@...stalfontz.com>
The CFA-10057 is a breakout board for the CFA-10036 that has Ethernet,
USB and a 4.3" LCD screen on it.
Signed-off-by: Brian Lilly <brian@...stalfontz.com>
Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx28-cfa10057.dts | 191 +++++++++++++++++++++++++++++++++++
arch/arm/mach-mxs/mach-mxs.c | 3 +-
3 files changed, 194 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/imx28-cfa10057.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e26c504..1560a09 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx28-cfa10037.dtb \
imx28-cfa10049.dtb \
imx28-cfa10055.dtb \
+ imx28-cfa10057.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
imx28-sps1.dtb \
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
new file mode 100644
index 0000000..2da713c
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -0,0 +1,191 @@
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+ model = "Crystalfontz CFA-10057 Board";
+ compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
+
+ apb@...00000 {
+ apbh@...00000 {
+ pinctrl@...18000 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&hog_pins_cfa10057
+ &hog_pins_cfa10057_pullup>;
+
+ hog_pins_cfa10057: hog-10057@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ hog_pins_cfa10057_pullup: hog-10057-pullup@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
+ 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
+ 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
+ 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+ 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+ 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+ 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+ 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+ 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+ 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+ 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+ 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+ 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+ 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+ 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+ 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+ 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+ 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+ 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+ 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+ 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_pins_cfa10057: lcdif-evk@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@...30000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_18bit_pins_cfa10057
+ &lcdif_pins_cfa10057>;
+ display = <&display>;
+ status = "okay";
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <30000000>;
+ hactive = <480>;
+ vactive = <800>;
+ hfront-porch = <12>;
+ hback-porch = <2>;
+ vfront-porch = <5>;
+ vback-porch = <3>;
+ hsync-len = <2>;
+ vsync-len = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+ };
+ };
+
+ apbx@...40000 {
+ lradc@...50000 {
+ fsl,lradc-touchscreen-wires = <4>;
+ status = "okay";
+ };
+
+ pwm: pwm@...64000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pins_b>;
+ status = "okay";
+ };
+
+ i2c1: i2c@...5a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
+ usbphy1: usbphy@...7e000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@...80000 {
+ usb1: usb@...90000 {
+ vbus-supply = <®_usb1_vbus>;
+ pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb1_vbus: usb1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 7 1>;
+ };
+ };
+
+ ahb@...80000 {
+ mac0: ethernet@...f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-reset-gpios = <&gpio2 21 0>;
+ phy-reset-duration = <100>;
+ status = "okay";
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 3 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ };
+};
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 60b26c6..77280c6 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -365,7 +365,8 @@ static void __init mxs_machine_init(void)
apx4devkit_init();
else if (of_machine_is_compatible("crystalfontz,cfa10037") ||
of_machine_is_compatible("crystalfontz,cfa10049") ||
- of_machine_is_compatible("crystalfontz,cfa10055"))
+ of_machine_is_compatible("crystalfontz,cfa10055") ||
+ of_machine_is_compatible("crystalfontz,cfa10057"))
crystalfontz_init();
of_platform_populate(NULL, of_default_bus_match_table,
--
1.8.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists