| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1371139562-305-4-git-send-email-james.hogan@imgtec.com>
Date: Thu, 13 Jun 2013 17:06:00 +0100
From: James Hogan <james.hogan@...tec.com>
To: Mike Turquette <mturquette@...aro.org>,
<linux-arm-kernel@...ts.infradead.org>
CC: Stephen Boyd <sboyd@...eaurora.org>,
<linux-kernel@...r.kernel.org>,
Saravana Kannan <skannan@...eaurora.org>,
Doug Anderson <dianders@...omium.org>,
James Hogan <james.hogan@...tec.com>
Subject: [PATCH v5 3/5] clk: add support for clock reparent on set_rate
Add core support to allow clock implementations to select the best
parent clock when rounding a rate, e.g. the one which can provide the
closest clock rate to that requested. This is by way of adding a new
clock op, determine_rate(), which is like round_rate() but has an extra
parameter to allow the clock implementation to optionally select a
different parent clock. The core then takes care of reparenting the
clock when setting the rate.
The parent change takes place with the help of some new private data
members. struct clk::new_parent specifies a clock's new parent (NULL
indicates no change), and struct clk::new_child specifies a clock's new
child (whose new_parent member points back to it). The purpose of these
are to allow correct walking of the future tree for notifications prior
to actually reparenting any clocks, specifically to skip child clocks
who are being reparented to another clock (they will be notified via the
new parent), and to include any new child clock. These pointers are set
by clk_calc_subtree(), and the new_child pointer gets cleared when a
child is actually reparented to avoid duplicate POST_RATE_CHANGE
notifications.
Each place where round_rate() is called, determine_rate() is checked
first and called in preference. This restructures a few of the call
sites to simplify the logic into if/else blocks.
Signed-off-by: James Hogan <james.hogan@...tec.com>
Reviewed-by: Stephen Boyd <sboyd@...eaurora.org>
Cc: Mike Turquette <mturquette@...aro.org>
Cc: linux-arm-kernel@...ts.infradead.org
---
Changes in v5:
* Updated clock hardware characteristics table in documentation.
Changes in v4:
* (not included Stephen Boyd's Reviewed-by due to changes)
* replace __clk_set_parent_no_recalc with __clk_set_parent.
* never pass NULL to determine_rate's best_parent_clk parameter, and
slight refactor of __clk_round_rate to use local copy of clk->parent.
* a few new comments around use of clk::new_child.
Changes in v3:
* rebased on v3.10-rc1.
* store new_parent_index in struct clk too (calculated from
clk_fetch_parent_index, and passed through __clk_set_parent_no_recalc
to __clk_set_parent).
* allow determine_rate to satisfy recalc_rate check in __clk_init.
Documentation/clk.txt | 46 ++++++++------
drivers/clk/clk.c | 142 +++++++++++++++++++++++++++++--------------
include/linux/clk-private.h | 3 +
include/linux/clk-provider.h | 7 +++
4 files changed, 132 insertions(+), 66 deletions(-)
diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index b9911c2..1c8406a 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -70,6 +70,10 @@ the operations defined in clk.h:
unsigned long parent_rate);
long (*round_rate)(struct clk_hw *hw, unsigned long,
unsigned long *);
+ long (*determine_rate)(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_clk);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
int (*set_rate)(struct clk_hw *hw, unsigned long);
@@ -179,26 +183,28 @@ mandatory, a cell marked as "n" implies that either including that
callback is invalid or otherwise unnecessary. Empty cells are either
optional or must be evaluated on a case-by-case basis.
- clock hardware characteristics
- -----------------------------------------------------------
- | gate | change rate | single parent | multiplexer | root |
- |------|-------------|---------------|-------------|------|
-.prepare | | | | | |
-.unprepare | | | | | |
- | | | | | |
-.enable | y | | | | |
-.disable | y | | | | |
-.is_enabled | y | | | | |
- | | | | | |
-.recalc_rate | | y | | | |
-.round_rate | | y | | | |
-.set_rate | | y | | | |
- | | | | | |
-.set_parent | | | n | y | n |
-.get_parent | | | n | y | n |
- | | | | | |
-.init | | | | | |
- -----------------------------------------------------------
+ clock hardware characteristics
+ -----------------------------------------------------------
+ | gate | change rate | single parent | multiplexer | root |
+ |------|-------------|---------------|-------------|------|
+.prepare | | | | | |
+.unprepare | | | | | |
+ | | | | | |
+.enable | y | | | | |
+.disable | y | | | | |
+.is_enabled | y | | | | |
+ | | | | | |
+.recalc_rate | | y | | | |
+.round_rate | | y [1] | | | |
+.determine_rate | | y [1] | | | |
+.set_rate | | y | | | |
+ | | | | | |
+.set_parent | | | n | y | n |
+.get_parent | | | n | y | n |
+ | | | | | |
+.init | | | | | |
+ -----------------------------------------------------------
+[1] either one of round_rate or determine_rate is required.
Finally, register your clock at run-time with a hardware-specific
registration function. This function simply populates struct clk_foo's
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 06d2b5e..52abc3f 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -888,21 +888,24 @@ EXPORT_SYMBOL_GPL(clk_enable);
unsigned long __clk_round_rate(struct clk *clk, unsigned long rate)
{
unsigned long parent_rate = 0;
+ struct clk *parent;
if (!clk)
return 0;
- if (!clk->ops->round_rate) {
- if (clk->flags & CLK_SET_RATE_PARENT)
- return __clk_round_rate(clk->parent, rate);
- else
- return clk->rate;
- }
-
- if (clk->parent)
- parent_rate = clk->parent->rate;
-
- return clk->ops->round_rate(clk->hw, rate, &parent_rate);
+ parent = clk->parent;
+ if (parent)
+ parent_rate = parent->rate;
+
+ if (clk->ops->determine_rate)
+ return clk->ops->determine_rate(clk->hw, rate, &parent_rate,
+ &parent);
+ else if (clk->ops->round_rate)
+ return clk->ops->round_rate(clk->hw, rate, &parent_rate);
+ else if (clk->flags & CLK_SET_RATE_PARENT)
+ return __clk_round_rate(clk->parent, rate);
+ else
+ return clk->rate;
}
/**
@@ -1055,6 +1058,10 @@ static u8 clk_fetch_parent_index(struct clk *clk, struct clk *parent)
static void clk_reparent(struct clk *clk, struct clk *new_parent)
{
+ /* avoid duplicate POST_RATE_CHANGE notifications */
+ if (new_parent->new_child == clk)
+ new_parent->new_child = NULL;
+
hlist_del(&clk->child_node);
if (new_parent)
@@ -1175,18 +1182,25 @@ out:
return ret;
}
-static void clk_calc_subtree(struct clk *clk, unsigned long new_rate)
+static void clk_calc_subtree(struct clk *clk, unsigned long new_rate,
+ struct clk *new_parent, u8 p_index)
{
struct clk *child;
clk->new_rate = new_rate;
+ clk->new_parent = new_parent;
+ clk->new_parent_index = p_index;
+ /* include clk in new parent's PRE_RATE_CHANGE notifications */
+ clk->new_child = NULL;
+ if (new_parent && new_parent != clk->parent)
+ new_parent->new_child = clk;
hlist_for_each_entry(child, &clk->children, child_node) {
if (child->ops->recalc_rate)
child->new_rate = child->ops->recalc_rate(child->hw, new_rate);
else
child->new_rate = new_rate;
- clk_calc_subtree(child, child->new_rate);
+ clk_calc_subtree(child, child->new_rate, NULL, 0);
}
}
@@ -1197,50 +1211,63 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate)
static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate)
{
struct clk *top = clk;
+ struct clk *old_parent, *parent;
unsigned long best_parent_rate = 0;
unsigned long new_rate;
+ u8 p_index = 0;
/* sanity */
if (IS_ERR_OR_NULL(clk))
return NULL;
/* save parent rate, if it exists */
- if (clk->parent)
- best_parent_rate = clk->parent->rate;
-
- /* never propagate up to the parent */
- if (!(clk->flags & CLK_SET_RATE_PARENT)) {
- if (!clk->ops->round_rate) {
- clk->new_rate = clk->rate;
- return NULL;
- }
- new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
+ parent = old_parent = clk->parent;
+ if (parent)
+ best_parent_rate = parent->rate;
+
+ /* find the closest rate and parent clk/rate */
+ if (clk->ops->determine_rate) {
+ new_rate = clk->ops->determine_rate(clk->hw, rate,
+ &best_parent_rate,
+ &parent);
+ } else if (clk->ops->round_rate) {
+ new_rate = clk->ops->round_rate(clk->hw, rate,
+ &best_parent_rate);
+ } else if (!parent || !(clk->flags & CLK_SET_RATE_PARENT)) {
+ /* pass-through clock without adjustable parent */
+ clk->new_rate = clk->rate;
+ return NULL;
+ } else {
+ /* pass-through clock with adjustable parent */
+ top = clk_calc_new_rates(parent, rate);
+ new_rate = parent->new_rate;
goto out;
}
- /* need clk->parent from here on out */
- if (!clk->parent) {
- pr_debug("%s: %s has NULL parent\n", __func__, clk->name);
+ /* some clocks must be gated to change parent */
+ if (parent != old_parent &&
+ (clk->flags & CLK_SET_PARENT_GATE) && clk->prepare_count) {
+ pr_debug("%s: %s not gated but wants to reparent\n",
+ __func__, clk->name);
return NULL;
}
- if (!clk->ops->round_rate) {
- top = clk_calc_new_rates(clk->parent, rate);
- new_rate = clk->parent->new_rate;
-
- goto out;
+ /* try finding the new parent index */
+ if (parent) {
+ p_index = clk_fetch_parent_index(clk, parent);
+ if (p_index == clk->num_parents) {
+ pr_debug("%s: clk %s can not be parent of clk %s\n",
+ __func__, parent->name, clk->name);
+ return NULL;
+ }
}
- new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate);
-
- if (best_parent_rate != clk->parent->rate) {
- top = clk_calc_new_rates(clk->parent, best_parent_rate);
-
- goto out;
- }
+ if ((clk->flags & CLK_SET_RATE_PARENT) && parent &&
+ best_parent_rate != parent->rate)
+ top = clk_calc_new_rates(parent, best_parent_rate);
out:
- clk_calc_subtree(clk, new_rate);
+ clk_calc_subtree(clk, new_rate, parent, p_index);
return top;
}
@@ -1252,7 +1279,7 @@ out:
*/
static struct clk *clk_propagate_rate_change(struct clk *clk, unsigned long event)
{
- struct clk *child, *fail_clk = NULL;
+ struct clk *child, *tmp_clk, *fail_clk = NULL;
int ret = NOTIFY_DONE;
if (clk->rate == clk->new_rate)
@@ -1265,9 +1292,19 @@ static struct clk *clk_propagate_rate_change(struct clk *clk, unsigned long even
}
hlist_for_each_entry(child, &clk->children, child_node) {
- clk = clk_propagate_rate_change(child, event);
- if (clk)
- fail_clk = clk;
+ /* Skip children who will be reparented to another clock */
+ if (child->new_parent && child->new_parent != clk)
+ continue;
+ tmp_clk = clk_propagate_rate_change(child, event);
+ if (tmp_clk)
+ fail_clk = tmp_clk;
+ }
+
+ /* handle the new child who might not be in clk->children yet */
+ if (clk->new_child) {
+ tmp_clk = clk_propagate_rate_change(clk->new_child, event);
+ if (tmp_clk)
+ fail_clk = tmp_clk;
}
return fail_clk;
@@ -1285,6 +1322,10 @@ static void clk_change_rate(struct clk *clk)
old_rate = clk->rate;
+ /* set parent */
+ if (clk->new_parent && clk->new_parent != clk->parent)
+ __clk_set_parent(clk, clk->new_parent, clk->new_parent_index);
+
if (clk->parent)
best_parent_rate = clk->parent->rate;
@@ -1299,8 +1340,16 @@ static void clk_change_rate(struct clk *clk)
if (clk->notifier_count && old_rate != clk->rate)
__clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
- hlist_for_each_entry(child, &clk->children, child_node)
+ hlist_for_each_entry(child, &clk->children, child_node) {
+ /* Skip children who will be reparented to another clock */
+ if (child->new_parent && child->new_parent != clk)
+ continue;
clk_change_rate(child);
+ }
+
+ /* handle the new child who might not be in clk->children yet */
+ if (clk->new_child)
+ clk_change_rate(clk->new_child);
}
/**
@@ -1552,8 +1601,9 @@ int __clk_init(struct device *dev, struct clk *clk)
/* check that clk_ops are sane. See Documentation/clk.txt */
if (clk->ops->set_rate &&
- !(clk->ops->round_rate && clk->ops->recalc_rate)) {
- pr_warning("%s: %s must implement .round_rate & .recalc_rate\n",
+ !((clk->ops->round_rate || clk->ops->determine_rate) &&
+ clk->ops->recalc_rate)) {
+ pr_warning("%s: %s must implement .round_rate or .determine_rate in addition to .recalc_rate\n",
__func__, clk->name);
ret = -EINVAL;
goto out;
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
index dd7adff..8138c94 100644
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -33,8 +33,11 @@ struct clk {
const char **parent_names;
struct clk **parents;
u8 num_parents;
+ u8 new_parent_index;
unsigned long rate;
unsigned long new_rate;
+ struct clk *new_parent;
+ struct clk *new_child;
unsigned long flags;
unsigned int enable_count;
unsigned int prepare_count;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index feff375..308f13a 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -79,6 +79,10 @@ struct clk_hw;
* @round_rate: Given a target rate as input, returns the closest rate actually
* supported by the clock.
*
+ * @determine_rate: Given a target rate as input, returns the closest rate
+ * actually supported by the clock, and optionally the parent clock
+ * that should be used to provide the clock rate.
+ *
* @get_parent: Queries the hardware to determine the parent of a clock. The
* return value is a u8 which specifies the index corresponding to
* the parent clock. This index can be applied to either the
@@ -126,6 +130,9 @@ struct clk_ops {
unsigned long parent_rate);
long (*round_rate)(struct clk_hw *hw, unsigned long,
unsigned long *);
+ long (*determine_rate)(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_clk);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
int (*set_rate)(struct clk_hw *hw, unsigned long,
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists