| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130613171106.GB12797@kroah.com>
Date: Thu, 13 Jun 2013 10:11:06 -0700
From: Greg KH <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>,
torvalds@...ux-foundation.org, stable@...r.kernel.org
Cc: lwn@....net, Jiri Slaby <jslaby@...e.cz>
Subject: Re: Linux 3.0.82
diff --git a/Makefile b/Makefile
index 5fdea51..29a38c3 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 0
-SUBLEVEL = 81
+SUBLEVEL = 82
EXTRAVERSION =
NAME = Sneaky Weasel
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 76f0b94..6f42a5d 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -448,6 +448,22 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13 - 2000 Notebook PC"),
},
},
+ {
+ .callback = video_ignore_initial_backlight,
+ .ident = "HP Pavilion g6 Notebook PC",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion g6 Notebook PC"),
+ },
+ },
+ {
+ .callback = video_ignore_initial_backlight,
+ .ident = "HP Pavilion m4",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion m4 Notebook PC"),
+ },
+ },
{}
};
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 2022a5c..3dc3c9e 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -976,7 +976,7 @@ EXPORT_SYMBOL(drm_vblank_off);
*/
void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
{
- /* vblank is not initialized (IRQ not installed ?) */
+ /* vblank is not initialized (IRQ not installed ?), or has been freed */
if (!dev->num_crtcs)
return;
/*
@@ -998,6 +998,10 @@ void drm_vblank_post_modeset(struct drm_device *dev, int crtc)
{
unsigned long irqflags;
+ /* vblank is not initialized (IRQ not installed ?), or has been freed */
+ if (!dev->num_crtcs)
+ return;
+
if (dev->vblank_inmodeset[crtc]) {
spin_lock_irqsave(&dev->vbl_lock, irqflags);
dev->vblank_disable_allowed = 1;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index d1141e8..05aae1c 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1609,7 +1609,7 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
* Assume that the preferred modes are
* arranged in priority order.
*/
- intel_ddc_get_modes(connector, intel_sdvo->i2c);
+ intel_ddc_get_modes(connector, &intel_sdvo->ddc);
if (list_empty(&connector->probed_modes) == false)
goto end;
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 1ad0a88..8178927 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -311,26 +311,68 @@ static int adm1021_detect(struct i2c_client *client,
man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID);
+ if (man_id < 0 || dev_id < 0)
+ return -ENODEV;
+
if (man_id == 0x4d && dev_id == 0x01)
type_name = "max1617a";
else if (man_id == 0x41) {
if ((dev_id & 0xF0) == 0x30)
type_name = "adm1023";
- else
+ else if ((dev_id & 0xF0) == 0x00)
type_name = "adm1021";
+ else
+ return -ENODEV;
} else if (man_id == 0x49)
type_name = "thmc10";
else if (man_id == 0x23)
type_name = "gl523sm";
else if (man_id == 0x54)
type_name = "mc1066";
- /* LM84 Mfr ID in a different place, and it has more unused bits */
- else if (conv_rate == 0x00
- && (config & 0x7F) == 0x00
- && (status & 0xAB) == 0x00)
- type_name = "lm84";
- else
- type_name = "max1617";
+ else {
+ int lte, rte, lhi, rhi, llo, rlo;
+
+ /* extra checks for LM84 and MAX1617 to avoid misdetections */
+
+ llo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(0));
+ rlo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(1));
+
+ /* fail if any of the additional register reads failed */
+ if (llo < 0 || rlo < 0)
+ return -ENODEV;
+
+ lte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(0));
+ rte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(1));
+ lhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(0));
+ rhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(1));
+
+ /*
+ * Fail for negative temperatures and negative high limits.
+ * This check also catches read errors on the tested registers.
+ */
+ if ((s8)lte < 0 || (s8)rte < 0 || (s8)lhi < 0 || (s8)rhi < 0)
+ return -ENODEV;
+
+ /* fail if all registers hold the same value */
+ if (lte == rte && lte == lhi && lte == rhi && lte == llo
+ && lte == rlo)
+ return -ENODEV;
+
+ /*
+ * LM84 Mfr ID is in a different place,
+ * and it has more unused bits.
+ */
+ if (conv_rate == 0x00
+ && (config & 0x7F) == 0x00
+ && (status & 0xAB) == 0x00) {
+ type_name = "lm84";
+ } else {
+ /* fail if low limits are larger than high limits */
+ if ((s8)llo > lhi || (s8)rlo > rhi)
+ return -ENODEV;
+ type_name = "max1617";
+ }
+ }
pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n",
type_name, i2c_adapter_id(adapter), client->addr);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 53192f2..8949b23 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -236,7 +236,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask)
}
static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 };
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
/* carryover low/fullspeed bandwidth that crosses uframe boundries */
static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 18e875b..5cc633e 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -49,7 +49,7 @@ static int debug;
#define DRIVER_NAME "ark3116"
/* usb timeout of 1 second */
-#define ARK_TIMEOUT (1*HZ)
+#define ARK_TIMEOUT 1000
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x6547, 0x0232) },
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index d9906eb..a75cce9 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -96,6 +96,7 @@ static const struct usb_device_id id_table_earthmate[] = {
static const struct usb_device_id id_table_cyphidcomrs232[] = {
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ } /* Terminating entry */
};
@@ -109,6 +110,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
{ } /* Terminating entry */
};
@@ -268,6 +270,12 @@ static struct usb_serial_driver cypress_ca42v2_device = {
* Cypress serial helper functions
*****************************************************************************/
+/* FRWD Dongle hidcom needs to skip reset and speed checks */
+static inline bool is_frwd(struct usb_device *dev)
+{
+ return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
+ (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
+}
static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
{
@@ -277,6 +285,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
if (unstable_bauds)
return new_rate;
+ /* FRWD Dongle uses 115200 bps */
+ if (is_frwd(port->serial->dev))
+ return new_rate;
+
/*
* The general purpose firmware for the Cypress M8 allows for
* a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -490,7 +502,11 @@ static int generic_startup(struct usb_serial *serial)
}
init_waitqueue_head(&priv->delta_msr_wait);
- usb_reset_configuration(serial->dev);
+ /* Skip reset for FRWD device. It is a workaound:
+ device hangs if it receives SET_CONFIGURE in Configured
+ state. */
+ if (!is_frwd(serial->dev))
+ usb_reset_configuration(serial->dev);
priv->cmd_ctrl = 0;
priv->line_control = 0;
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 67cf608..b461311 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -24,6 +24,10 @@
#define VENDOR_ID_CYPRESS 0x04b4
#define PRODUCT_ID_CYPHIDCOM 0x5500
+/* FRWD Dongle - a GPS sports watch */
+#define VENDOR_ID_FRWD 0x6737
+#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001
+
/* Powercom UPS, chip CY7C63723 */
#define VENDOR_ID_POWERCOM 0x0d9f
#define PRODUCT_ID_UPS 0x0002
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 7639cba..45e55e2 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2141,6 +2141,9 @@ static void ftdi_set_termios(struct tty_struct *tty,
cflag = termios->c_cflag;
+ if (!old_termios)
+ goto no_skip;
+
if (old_termios->c_cflag == termios->c_cflag
&& old_termios->c_ispeed == termios->c_ispeed
&& old_termios->c_ospeed == termios->c_ospeed)
@@ -2154,6 +2157,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
(termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
goto no_data_parity_stop_changes;
+no_skip:
/* Set number of data bits, parity, stop bits */
urb_value = 0;
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 6aca631..cf2668e 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -327,7 +327,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
usb_bulk_msg(serial->dev,
usb_sndbulkpipe(serial->dev,
port->bulk_out_endpointAddress), buf,
- count, &actual, HZ * 1);
+ count, &actual, 1000);
if (status != IUU_OPERATION_OK)
dbg("%s - error = %2x", __func__, status);
@@ -350,7 +350,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
usb_bulk_msg(serial->dev,
usb_rcvbulkpipe(serial->dev,
port->bulk_in_endpointAddress), buf,
- count, &actual, HZ * 1);
+ count, &actual, 1000);
if (status != IUU_OPERATION_OK)
dbg("%s - error = %2x", __func__, status);
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index a442352..4f415e28 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1833,7 +1833,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
d_details = s_priv->device_details;
device_port = port->number - port->serial->minor;
- outcont_urb = d_details->outcont_endpoints[port->number];
+ outcont_urb = d_details->outcont_endpoints[device_port];
this_urb = p_priv->outcont_urb;
dbg("%s - endpoint %d", __func__, usb_pipeendpoint(this_urb->pipe));
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 40abedb..703d1fa 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -44,7 +44,7 @@
#define DRIVER_DESC "Moschip USB Serial Driver"
/* default urb timeout */
-#define MOS_WDR_TIMEOUT (HZ * 5)
+#define MOS_WDR_TIMEOUT 5000
#define MOS_MAX_PORT 0x02
#define MOS_WRITE 0x0E
@@ -234,11 +234,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
__u8 requesttype = (__u8)0xc0;
__u16 index = get_reg_index(reg);
__u16 value = get_reg_value(reg, serial_portnum);
- int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
- index, data, 1, MOS_WDR_TIMEOUT);
- if (status < 0)
+ u8 *buf;
+ int status;
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+ index, buf, 1, MOS_WDR_TIMEOUT);
+ if (status == 1)
+ *data = *buf;
+ else if (status < 0)
dev_err(&usbdev->dev,
"mos7720: usb_control_msg() failed: %d", status);
+ kfree(buf);
+
return status;
}
@@ -1700,7 +1711,7 @@ static void change_port_settings(struct tty_struct *tty,
mos7720_port->shadowMCR |= (UART_MCR_XONANY);
/* To set hardware flow control to the specified *
* serial port, in SP1/2_CONTROL_REG */
- if (port->number)
+ if (port_number)
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
else
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
@@ -2113,7 +2124,7 @@ static int mos7720_startup(struct usb_serial *serial)
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
+ (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
/* start the interrupt urb */
ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
@@ -2158,7 +2169,7 @@ static void mos7720_release(struct usb_serial *serial)
/* wait for synchronous usb calls to return */
if (mos_parport->msg_pending)
wait_for_completion_timeout(&mos_parport->syncmsg_compl,
- MOS_WDR_TIMEOUT);
+ msecs_to_jiffies(MOS_WDR_TIMEOUT));
parport_remove_port(mos_parport->pp);
usb_set_serial_data(serial, NULL);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 59c4997..8ea37bc 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -593,6 +593,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */
+ .driver_info = (kernel_ulong_t) &net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 1c11959..189a894 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -600,6 +600,7 @@ static int treo_attach(struct usb_serial *serial)
dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\
dest->bulk_in_buffer = src->bulk_in_buffer; \
dest->interrupt_in_urb = src->interrupt_in_urb; \
+ dest->interrupt_in_urb->context = dest; \
dest->interrupt_in_endpointAddress = \
src->interrupt_in_endpointAddress;\
dest->interrupt_in_buffer = src->interrupt_in_buffer; \
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 59d646d..0ec60cd 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -1209,7 +1209,7 @@ static void firm_setup_port(struct tty_struct *tty)
struct whiteheat_port_settings port_settings;
unsigned int cflag = tty->termios->c_cflag;
- port_settings.port = port->number + 1;
+ port_settings.port = port->number - port->serial->minor + 1;
/* get the byte size */
switch (cflag & CSIZE) {
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 8e4361f..0d704b0 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -933,6 +933,19 @@ static __init void ftrace_profile_debugfs(struct dentry *d_tracer)
static struct pid * const ftrace_swapper_pid = &init_struct_pid;
+static loff_t
+ftrace_filter_lseek(struct file *file, loff_t offset, int whence)
+{
+ loff_t ret;
+
+ if (file->f_mode & FMODE_READ)
+ ret = seq_lseek(file, offset, whence);
+ else
+ file->f_pos = ret = 1;
+
+ return ret;
+}
+
#ifdef CONFIG_DYNAMIC_FTRACE
#ifndef CONFIG_FTRACE_MCOUNT_RECORD
@@ -2299,19 +2312,6 @@ ftrace_notrace_open(struct inode *inode, struct file *file)
inode, file);
}
-static loff_t
-ftrace_regex_lseek(struct file *file, loff_t offset, int origin)
-{
- loff_t ret;
-
- if (file->f_mode & FMODE_READ)
- ret = seq_lseek(file, offset, origin);
- else
- file->f_pos = ret = 1;
-
- return ret;
-}
-
static int ftrace_match(char *str, char *regex, int len, int type)
{
int matched = 0;
@@ -3118,7 +3118,7 @@ static const struct file_operations ftrace_filter_fops = {
.open = ftrace_filter_open,
.read = seq_read,
.write = ftrace_filter_write,
- .llseek = ftrace_regex_lseek,
+ .llseek = ftrace_filter_lseek,
.release = ftrace_regex_release,
};
@@ -3126,7 +3126,7 @@ static const struct file_operations ftrace_notrace_fops = {
.open = ftrace_notrace_open,
.read = seq_read,
.write = ftrace_notrace_write,
- .llseek = ftrace_regex_lseek,
+ .llseek = ftrace_filter_lseek,
.release = ftrace_regex_release,
};
@@ -3335,8 +3335,8 @@ static const struct file_operations ftrace_graph_fops = {
.open = ftrace_graph_open,
.read = seq_read,
.write = ftrace_graph_write,
+ .llseek = ftrace_filter_lseek,
.release = ftrace_graph_release,
- .llseek = seq_lseek,
};
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
@@ -3822,7 +3822,7 @@ static const struct file_operations ftrace_pid_fops = {
.open = ftrace_pid_open,
.write = ftrace_pid_write,
.read = seq_read,
- .llseek = seq_lseek,
+ .llseek = ftrace_filter_lseek,
.release = ftrace_pid_release,
};
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 11a9f86..3c30b3b 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -146,7 +146,13 @@
.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
},
{
- USB_DEVICE(0x046d, 0x0990),
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .idVendor = 0x046d,
+ .idProduct = 0x0990,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.vendor_name = "Logitech, Inc.",
.product_name = "QuickCam Pro 9000",
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists