| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130613171220.GC18119@kroah.com>
Date: Thu, 13 Jun 2013 10:12:20 -0700
From: Greg KH <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>,
torvalds@...ux-foundation.org, stable@...r.kernel.org
Cc: lwn@....net, Jiri Slaby <jslaby@...e.cz>
Subject: Re: Linux 3.4.49
diff --git a/Makefile b/Makefile
index 65c0d7f..a36dada 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 4
-SUBLEVEL = 48
+SUBLEVEL = 49
EXTRAVERSION =
NAME = Saber-toothed Squirrel
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 8752f79..8a811d9 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -83,7 +83,11 @@ static int pseries_eeh_init(void)
ibm_configure_pe = rtas_token("ibm,configure-pe");
ibm_configure_bridge = rtas_token ("ibm,configure-bridge");
- /* necessary sanity check */
+ /*
+ * Necessary sanity check. We needn't check "get-config-addr-info"
+ * and its variant since the old firmware probably support address
+ * of domain/bus/slot/function for EEH RTAS operations.
+ */
if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) {
pr_warning("%s: RTAS service <ibm,set-eeh-option> invalid\n",
__func__);
@@ -102,12 +106,6 @@ static int pseries_eeh_init(void)
pr_warning("%s: RTAS service <ibm,slot-error-detail> invalid\n",
__func__);
return -EINVAL;
- } else if (ibm_get_config_addr_info2 == RTAS_UNKNOWN_SERVICE &&
- ibm_get_config_addr_info == RTAS_UNKNOWN_SERVICE) {
- pr_warning("%s: RTAS service <ibm,get-config-addr-info2> and "
- "<ibm,get-config-addr-info> invalid\n",
- __func__);
- return -EINVAL;
} else if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE &&
ibm_configure_bridge == RTAS_UNKNOWN_SERVICE) {
pr_warning("%s: RTAS service <ibm,configure-pe> and "
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 91357e1..6d2c49b 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -447,6 +447,22 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13 - 2000 Notebook PC"),
},
},
+ {
+ .callback = video_ignore_initial_backlight,
+ .ident = "HP Pavilion g6 Notebook PC",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion g6 Notebook PC"),
+ },
+ },
+ {
+ .callback = video_ignore_initial_backlight,
+ .ident = "HP Pavilion m4",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion m4 Notebook PC"),
+ },
+ },
{}
};
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index c869436..dc33ba5 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -981,7 +981,7 @@ EXPORT_SYMBOL(drm_vblank_off);
*/
void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
{
- /* vblank is not initialized (IRQ not installed ?) */
+ /* vblank is not initialized (IRQ not installed ?), or has been freed */
if (!dev->num_crtcs)
return;
/*
@@ -1003,6 +1003,10 @@ void drm_vblank_post_modeset(struct drm_device *dev, int crtc)
{
unsigned long irqflags;
+ /* vblank is not initialized (IRQ not installed ?), or has been freed */
+ if (!dev->num_crtcs)
+ return;
+
if (dev->vblank_inmodeset[crtc]) {
spin_lock_irqsave(&dev->vbl_lock, irqflags);
dev->vblank_disable_allowed = 1;
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
index 8ea202f..fa74a86 100644
--- a/drivers/gpu/drm/gma500/framebuffer.c
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -782,8 +782,8 @@ void psb_modeset_init(struct drm_device *dev)
for (i = 0; i < dev_priv->num_pipe; i++)
psb_intel_crtc_init(dev, i, mode_dev);
- dev->mode_config.max_width = 2048;
- dev->mode_config.max_height = 2048;
+ dev->mode_config.max_width = 4096;
+ dev->mode_config.max_height = 4096;
psb_setup_outputs(dev);
}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 1ad5906..207180d 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -747,10 +747,10 @@ static const struct dmi_system_id intel_no_lvds[] = {
},
{
.callback = intel_no_lvds_dmi_callback,
- .ident = "Hewlett-Packard HP t5740e Thin Client",
+ .ident = "Hewlett-Packard HP t5740",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP t5740e Thin Client"),
+ DMI_MATCH(DMI_PRODUCT_NAME, " t5740"),
},
},
{
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 1b6b157..aeb9d6e 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1581,7 +1581,7 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
* Assume that the preferred modes are
* arranged in priority order.
*/
- intel_ddc_get_modes(connector, intel_sdvo->i2c);
+ intel_ddc_get_modes(connector, &intel_sdvo->ddc);
if (list_empty(&connector->probed_modes) == false)
goto end;
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index 23e3ea6..ced9370 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -396,6 +396,8 @@ atombios_digital_setup(struct drm_encoder *encoder, int action)
int
atombios_get_encoder_mode(struct drm_encoder *encoder)
{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct drm_connector *connector;
struct radeon_connector *radeon_connector;
@@ -421,7 +423,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */
if (drm_detect_hdmi_monitor(radeon_connector->edid) &&
- radeon_audio)
+ radeon_audio &&
+ !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */
return ATOM_ENCODER_MODE_HDMI;
else if (radeon_connector->use_digital)
return ATOM_ENCODER_MODE_DVI;
@@ -432,7 +435,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
case DRM_MODE_CONNECTOR_HDMIA:
default:
if (drm_detect_hdmi_monitor(radeon_connector->edid) &&
- radeon_audio)
+ radeon_audio &&
+ !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */
return ATOM_ENCODER_MODE_HDMI;
else
return ATOM_ENCODER_MODE_DVI;
@@ -446,7 +450,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
(dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
return ATOM_ENCODER_MODE_DP;
else if (drm_detect_hdmi_monitor(radeon_connector->edid) &&
- radeon_audio)
+ radeon_audio &&
+ !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */
return ATOM_ENCODER_MODE_HDMI;
else
return ATOM_ENCODER_MODE_DVI;
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 6a8776e..300099d 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -3258,6 +3258,12 @@ static int evergreen_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = r600_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -3409,10 +3415,6 @@ int evergreen_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index d706da8..f5387b3 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1614,6 +1614,12 @@ static int cayman_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = r600_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -1744,10 +1750,6 @@ int cayman_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
ring->ring_obj = NULL;
r600_ring_init(rdev, ring, 1024 * 1024);
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index fe33d35..40ed0e5 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -3952,6 +3952,12 @@ static int r100_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r100_irq_set(rdev);
rdev->config.r100.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -4113,9 +4119,6 @@ int r100_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index fa14383..63b53aa 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -1405,6 +1405,12 @@ static int r300_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r100_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -1545,9 +1551,6 @@ int r300_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index f3fcaac..1a9347f 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -265,6 +265,12 @@ static int r420_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r100_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -417,10 +423,6 @@ int r420_init(struct radeon_device *rdev)
if (r) {
return r;
}
- r = radeon_irq_kms_init(rdev);
- if (r) {
- return r;
- }
/* Memory manager */
r = radeon_bo_init(rdev);
if (r) {
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index ebcc15b..57be784 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -194,6 +194,12 @@ static int r520_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
rs600_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -301,9 +307,6 @@ int r520_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index b1ff9cc..8c403d9 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2470,6 +2470,12 @@ int r600_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = r600_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -2624,10 +2630,6 @@ int r600_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index 4cf381b..5099bd3 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -417,6 +417,12 @@ static int rs400_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r100_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -541,9 +547,6 @@ int rs400_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index d25cf86..5248001 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -864,6 +864,12 @@ static int rs600_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
rs600_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -994,9 +1000,6 @@ int rs600_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index f2c3b9d..c46900c 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -628,6 +628,12 @@ static int rs690_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
rs600_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -759,9 +765,6 @@ int rs690_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 43af363..0532bbe 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -386,6 +386,12 @@ static int rv515_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
rs600_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -520,9 +526,6 @@ int rv515_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 591040b..4a3937f 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -1099,6 +1099,12 @@ static int rv770_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = r600_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -1237,10 +1243,6 @@ int rv770_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 2dbd585..e22b460 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -3876,6 +3876,12 @@ static int si_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = si_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -4044,10 +4050,6 @@ int si_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
ring = &rdev->ring[RADEON_RING_TYPE_GFX_INDEX];
ring->ring_obj = NULL;
r600_ring_init(rdev, ring, 1024 * 1024);
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 4394e7e..5653461 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -332,26 +332,68 @@ static int adm1021_detect(struct i2c_client *client,
man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID);
+ if (man_id < 0 || dev_id < 0)
+ return -ENODEV;
+
if (man_id == 0x4d && dev_id == 0x01)
type_name = "max1617a";
else if (man_id == 0x41) {
if ((dev_id & 0xF0) == 0x30)
type_name = "adm1023";
- else
+ else if ((dev_id & 0xF0) == 0x00)
type_name = "adm1021";
+ else
+ return -ENODEV;
} else if (man_id == 0x49)
type_name = "thmc10";
else if (man_id == 0x23)
type_name = "gl523sm";
else if (man_id == 0x54)
type_name = "mc1066";
- /* LM84 Mfr ID in a different place, and it has more unused bits */
- else if (conv_rate == 0x00
- && (config & 0x7F) == 0x00
- && (status & 0xAB) == 0x00)
- type_name = "lm84";
- else
- type_name = "max1617";
+ else {
+ int lte, rte, lhi, rhi, llo, rlo;
+
+ /* extra checks for LM84 and MAX1617 to avoid misdetections */
+
+ llo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(0));
+ rlo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(1));
+
+ /* fail if any of the additional register reads failed */
+ if (llo < 0 || rlo < 0)
+ return -ENODEV;
+
+ lte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(0));
+ rte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(1));
+ lhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(0));
+ rhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(1));
+
+ /*
+ * Fail for negative temperatures and negative high limits.
+ * This check also catches read errors on the tested registers.
+ */
+ if ((s8)lte < 0 || (s8)rte < 0 || (s8)lhi < 0 || (s8)rhi < 0)
+ return -ENODEV;
+
+ /* fail if all registers hold the same value */
+ if (lte == rte && lte == lhi && lte == rhi && lte == llo
+ && lte == rlo)
+ return -ENODEV;
+
+ /*
+ * LM84 Mfr ID is in a different place,
+ * and it has more unused bits.
+ */
+ if (conv_rate == 0x00
+ && (config & 0x7F) == 0x00
+ && (status & 0xAB) == 0x00) {
+ type_name = "lm84";
+ } else {
+ /* fail if low limits are larger than high limits */
+ if ((s8)llo > lhi || (s8)rlo > rhi)
+ return -ENODEV;
+ type_name = "max1617";
+ }
+ }
pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n",
type_name, i2c_adapter_id(adapter), client->addr);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 14d2d71..a60679c 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -236,7 +236,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask)
}
static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 };
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
/* carryover low/fullspeed bandwidth that crosses uframe boundries */
static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index f059222..5080b1d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1845,6 +1845,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
spin_unlock_irqrestore(&xhci->lock, flags);
+ if (!xhci->rh_bw)
+ goto no_bw;
+
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
for (i = 0; i < num_ports; i++) {
struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
@@ -1863,6 +1866,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
}
+no_bw:
xhci->num_usb2_ports = 0;
xhci->num_usb3_ports = 0;
xhci->num_active_eps = 0;
@@ -2274,6 +2278,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
u32 page_size, temp;
int i;
+ INIT_LIST_HEAD(&xhci->lpm_failed_devs);
+ INIT_LIST_HEAD(&xhci->cancel_cmd_list);
+
page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
for (i = 0; i < 16; i++) {
@@ -2352,7 +2359,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
if (!xhci->cmd_ring)
goto fail;
- INIT_LIST_HEAD(&xhci->cancel_cmd_list);
xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
(unsigned long long)xhci->cmd_ring->first_seg->dma);
@@ -2453,8 +2459,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
if (xhci_setup_port_arrays(xhci, flags))
goto fail;
- INIT_LIST_HEAD(&xhci->lpm_failed_devs);
-
/* Enable USB 3.0 device notifications for function remote wake, which
* is necessary for allowing USB 3.0 devices to do remote wakeup from
* U3 (device suspend).
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ec2c89f..0f928b3 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -947,6 +947,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct usb_hcd *secondary_hcd;
int retval = 0;
+ bool comp_timer_running = false;
/* Wait a bit if either of the roothubs need to settle from the
* transition into bus suspend.
@@ -984,6 +985,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
/* If restore operation fails, re-initialize the HC during resume */
if ((temp & STS_SRE) || hibernated) {
+
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ !(xhci_all_ports_seen_u0(xhci))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n");
+ }
+
/* Let the USB core know _both_ roothubs lost power. */
usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
@@ -1026,6 +1034,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
retval = xhci_init(hcd->primary_hcd);
if (retval)
return retval;
+ comp_timer_running = true;
+
xhci_dbg(xhci, "Start the primary HCD\n");
retval = xhci_run(hcd->primary_hcd);
if (!retval) {
@@ -1067,7 +1077,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
* to suffer the Compliance Mode issue again. It doesn't matter if
* ports have entered previously to U0 before system's suspension.
*/
- if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
compliance_mode_recovery_timer_init(xhci);
/* Re-enable port polling. */
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index f99f471..31bfe60 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -49,7 +49,7 @@ static bool debug;
#define DRIVER_NAME "ark3116"
/* usb timeout of 1 second */
-#define ARK_TIMEOUT (1*HZ)
+#define ARK_TIMEOUT 1000
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x6547, 0x0232) },
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index afc886c..270bda8 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -70,6 +70,7 @@ static const struct usb_device_id id_table_earthmate[] = {
static const struct usb_device_id id_table_cyphidcomrs232[] = {
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ } /* Terminating entry */
};
@@ -83,6 +84,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
{ } /* Terminating entry */
};
@@ -243,6 +245,12 @@ static struct usb_serial_driver * const serial_drivers[] = {
* Cypress serial helper functions
*****************************************************************************/
+/* FRWD Dongle hidcom needs to skip reset and speed checks */
+static inline bool is_frwd(struct usb_device *dev)
+{
+ return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
+ (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
+}
static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
{
@@ -252,6 +260,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
if (unstable_bauds)
return new_rate;
+ /* FRWD Dongle uses 115200 bps */
+ if (is_frwd(port->serial->dev))
+ return new_rate;
+
/*
* The general purpose firmware for the Cypress M8 allows for
* a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -465,7 +477,11 @@ static int generic_startup(struct usb_serial *serial)
}
init_waitqueue_head(&priv->delta_msr_wait);
- usb_reset_configuration(serial->dev);
+ /* Skip reset for FRWD device. It is a workaound:
+ device hangs if it receives SET_CONFIGURE in Configured
+ state. */
+ if (!is_frwd(serial->dev))
+ usb_reset_configuration(serial->dev);
priv->cmd_ctrl = 0;
priv->line_control = 0;
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 67cf608..b461311 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -24,6 +24,10 @@
#define VENDOR_ID_CYPRESS 0x04b4
#define PRODUCT_ID_CYPHIDCOM 0x5500
+/* FRWD Dongle - a GPS sports watch */
+#define VENDOR_ID_FRWD 0x6737
+#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001
+
/* Powercom UPS, chip CY7C63723 */
#define VENDOR_ID_POWERCOM 0x0d9f
#define PRODUCT_ID_UPS 0x0002
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c6f8e62..f8a9cd7 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2173,7 +2173,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
cflag = termios->c_cflag;
- if (old_termios == 0)
+ if (!old_termios)
goto no_skip;
if (old_termios->c_cflag == termios->c_cflag
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index f2192d5..53c639c 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -326,7 +326,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
usb_bulk_msg(serial->dev,
usb_sndbulkpipe(serial->dev,
port->bulk_out_endpointAddress), buf,
- count, &actual, HZ * 1);
+ count, &actual, 1000);
if (status != IUU_OPERATION_OK)
dbg("%s - error = %2x", __func__, status);
@@ -349,7 +349,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
usb_bulk_msg(serial->dev,
usb_rcvbulkpipe(serial->dev,
port->bulk_in_endpointAddress), buf,
- count, &actual, HZ * 1);
+ count, &actual, 1000);
if (status != IUU_OPERATION_OK)
dbg("%s - error = %2x", __func__, status);
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index a39ddd1..253bff6 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1705,7 +1705,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
d_details = s_priv->device_details;
device_port = port->number - port->serial->minor;
- outcont_urb = d_details->outcont_endpoints[port->number];
+ outcont_urb = d_details->outcont_endpoints[device_port];
this_urb = p_priv->outcont_urb;
dbg("%s - endpoint %d", __func__, usb_pipeendpoint(this_urb->pipe));
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index bdce820..77d974d 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -44,7 +44,7 @@
#define DRIVER_DESC "Moschip USB Serial Driver"
/* default urb timeout */
-#define MOS_WDR_TIMEOUT (HZ * 5)
+#define MOS_WDR_TIMEOUT 5000
#define MOS_MAX_PORT 0x02
#define MOS_WRITE 0x0E
@@ -234,11 +234,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
__u8 requesttype = (__u8)0xc0;
__u16 index = get_reg_index(reg);
__u16 value = get_reg_value(reg, serial_portnum);
- int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
- index, data, 1, MOS_WDR_TIMEOUT);
- if (status < 0)
+ u8 *buf;
+ int status;
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+ index, buf, 1, MOS_WDR_TIMEOUT);
+ if (status == 1)
+ *data = *buf;
+ else if (status < 0)
dev_err(&usbdev->dev,
"mos7720: usb_control_msg() failed: %d", status);
+ kfree(buf);
+
return status;
}
@@ -1690,7 +1701,7 @@ static void change_port_settings(struct tty_struct *tty,
mos7720_port->shadowMCR |= (UART_MCR_XONANY);
/* To set hardware flow control to the specified *
* serial port, in SP1/2_CONTROL_REG */
- if (port->number)
+ if (port_number)
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
else
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
@@ -2094,7 +2105,7 @@ static int mos7720_startup(struct usb_serial *serial)
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
+ (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
/* start the interrupt urb */
ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
@@ -2139,7 +2150,7 @@ static void mos7720_release(struct usb_serial *serial)
/* wait for synchronous usb calls to return */
if (mos_parport->msg_pending)
wait_for_completion_timeout(&mos_parport->syncmsg_compl,
- MOS_WDR_TIMEOUT);
+ msecs_to_jiffies(MOS_WDR_TIMEOUT));
parport_remove_port(mos_parport->pp);
usb_set_serial_data(serial, NULL);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 386b3ab..5b24260 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -593,6 +593,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */
+ .driver_info = (kernel_ulong_t) &net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 71d6964..b3afd19 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -596,10 +596,19 @@ static int treo_attach(struct usb_serial *serial)
*/
#define COPY_PORT(dest, src) \
do { \
+ int i; \
+ \
+ for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \
+ dest->read_urbs[i] = src->read_urbs[i]; \
+ dest->read_urbs[i]->context = dest; \
+ dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \
+ } \
dest->read_urb = src->read_urb; \
dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\
dest->bulk_in_buffer = src->bulk_in_buffer; \
+ dest->bulk_in_size = src->bulk_in_size; \
dest->interrupt_in_urb = src->interrupt_in_urb; \
+ dest->interrupt_in_urb->context = dest; \
dest->interrupt_in_endpointAddress = \
src->interrupt_in_endpointAddress;\
dest->interrupt_in_buffer = src->interrupt_in_buffer; \
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 171226a..0d06d7c 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -1154,7 +1154,7 @@ static void firm_setup_port(struct tty_struct *tty)
struct whiteheat_port_settings port_settings;
unsigned int cflag = tty->termios->c_cflag;
- port_settings.port = port->number + 1;
+ port_settings.port = port->number - port->serial->minor + 1;
/* get the byte size */
switch (cflag & CSIZE) {
diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index b6df20a..d52703c 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -9,6 +9,8 @@
#include <xen/events.h>
#include <linux/sched.h>
#include "pciback.h"
+#include <linux/ratelimit.h>
+#include <linux/printk.h>
int verbose_request;
module_param(verbose_request, int, 0644);
@@ -136,7 +138,6 @@ int xen_pcibk_enable_msi(struct xen_pcibk_device *pdev,
struct pci_dev *dev, struct xen_pci_op *op)
{
struct xen_pcibk_dev_data *dev_data;
- int otherend = pdev->xdev->otherend_id;
int status;
if (unlikely(verbose_request))
@@ -145,8 +146,9 @@ int xen_pcibk_enable_msi(struct xen_pcibk_device *pdev,
status = pci_enable_msi(dev);
if (status) {
- printk(KERN_ERR "error enable msi for guest %x status %x\n",
- otherend, status);
+ pr_warn_ratelimited(DRV_NAME ": %s: error enabling MSI for guest %u: err %d\n",
+ pci_name(dev), pdev->xdev->otherend_id,
+ status);
op->value = 0;
return XEN_PCI_ERR_op_failed;
}
@@ -224,10 +226,10 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev,
pci_name(dev), i,
op->msix_entries[i].vector);
}
- } else {
- printk(KERN_WARNING DRV_NAME ": %s: failed to enable MSI-X: err %d!\n",
- pci_name(dev), result);
- }
+ } else
+ pr_warn_ratelimited(DRV_NAME ": %s: error enabling MSI-X for guest %u: err %d!\n",
+ pci_name(dev), pdev->xdev->otherend_id,
+ result);
kfree(entries);
op->value = result;
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 72a6cab..f80ca4a 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -299,7 +299,6 @@ ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
size_t cnt, loff_t *ppos);
ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
size_t cnt, loff_t *ppos);
-loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int origin);
int ftrace_regex_release(struct inode *inode, struct file *file);
void __init
@@ -420,6 +419,8 @@ static inline int
ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; }
#endif /* CONFIG_DYNAMIC_FTRACE */
+loff_t ftrace_filter_lseek(struct file *file, loff_t offset, int whence);
+
/* totally disable ftrace - can not re-enable after this */
void ftrace_kill(void);
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index c962d31..e101cf9 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -999,6 +999,19 @@ static __init void ftrace_profile_debugfs(struct dentry *d_tracer)
static struct pid * const ftrace_swapper_pid = &init_struct_pid;
+loff_t
+ftrace_filter_lseek(struct file *file, loff_t offset, int whence)
+{
+ loff_t ret;
+
+ if (file->f_mode & FMODE_READ)
+ ret = seq_lseek(file, offset, whence);
+ else
+ file->f_pos = ret = 1;
+
+ return ret;
+}
+
#ifdef CONFIG_DYNAMIC_FTRACE
#ifndef CONFIG_FTRACE_MCOUNT_RECORD
@@ -2541,7 +2554,7 @@ static void ftrace_filter_reset(struct ftrace_hash *hash)
* routine, you can use ftrace_filter_write() for the write
* routine if @flag has FTRACE_ITER_FILTER set, or
* ftrace_notrace_write() if @flag has FTRACE_ITER_NOTRACE set.
- * ftrace_regex_lseek() should be used as the lseek routine, and
+ * ftrace_filter_lseek() should be used as the lseek routine, and
* release must call ftrace_regex_release().
*/
int
@@ -2625,19 +2638,6 @@ ftrace_notrace_open(struct inode *inode, struct file *file)
inode, file);
}
-loff_t
-ftrace_regex_lseek(struct file *file, loff_t offset, int origin)
-{
- loff_t ret;
-
- if (file->f_mode & FMODE_READ)
- ret = seq_lseek(file, offset, origin);
- else
- file->f_pos = ret = 1;
-
- return ret;
-}
-
static int ftrace_match(char *str, char *regex, int len, int type)
{
int matched = 0;
@@ -3445,7 +3445,7 @@ static const struct file_operations ftrace_filter_fops = {
.open = ftrace_filter_open,
.read = seq_read,
.write = ftrace_filter_write,
- .llseek = ftrace_regex_lseek,
+ .llseek = ftrace_filter_lseek,
.release = ftrace_regex_release,
};
@@ -3453,7 +3453,7 @@ static const struct file_operations ftrace_notrace_fops = {
.open = ftrace_notrace_open,
.read = seq_read,
.write = ftrace_notrace_write,
- .llseek = ftrace_regex_lseek,
+ .llseek = ftrace_filter_lseek,
.release = ftrace_regex_release,
};
@@ -3659,8 +3659,8 @@ static const struct file_operations ftrace_graph_fops = {
.open = ftrace_graph_open,
.read = seq_read,
.write = ftrace_graph_write,
+ .llseek = ftrace_filter_lseek,
.release = ftrace_graph_release,
- .llseek = seq_lseek,
};
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
@@ -4261,7 +4261,7 @@ static const struct file_operations ftrace_pid_fops = {
.open = ftrace_pid_open,
.write = ftrace_pid_write,
.read = seq_read,
- .llseek = seq_lseek,
+ .llseek = ftrace_filter_lseek,
.release = ftrace_pid_release,
};
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index c70f6bf..8298997 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -384,7 +384,7 @@ static const struct file_operations stack_trace_filter_fops = {
.open = stack_trace_filter_open,
.read = seq_read,
.write = ftrace_filter_write,
- .llseek = ftrace_regex_lseek,
+ .llseek = ftrace_filter_lseek,
.release = ftrace_regex_release,
};
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index f008fc7..e075a67 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -822,6 +822,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval,
case USB_ID(0x046d, 0x0808):
case USB_ID(0x046d, 0x0809):
case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
+ case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */
case USB_ID(0x046d, 0x0991):
/* Most audio usb devices lie about volume resolution.
* Most Logitech webcams have res = 384.
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index fa4c2f7..915bc2c 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -157,7 +157,13 @@
.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
},
{
- USB_DEVICE(0x046d, 0x0990),
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .idVendor = 0x046d,
+ .idProduct = 0x0990,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.vendor_name = "Logitech, Inc.",
.product_name = "QuickCam Pro 9000",
@@ -1622,7 +1628,11 @@ YAMAHA_DEVICE(0x7010, "UB99"),
USB_DEVICE_VENDOR_SPEC(0x0582, 0x0108),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.ifnum = 0,
- .type = QUIRK_MIDI_STANDARD_INTERFACE
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = & (const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0007,
+ .in_cables = 0x0007
+ }
}
},
{
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists