| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130613175516.GB9768@kroah.com>
Date: Thu, 13 Jun 2013 10:55:16 -0700
From: Greg KH <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>,
torvalds@...ux-foundation.org, stable@...r.kernel.org
Cc: lwn@....net, Jiri Slaby <jslaby@...e.cz>
Subject: Re: Linux 3.9.6
diff --git a/Makefile b/Makefile
index 8818c95..4a40307 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
VERSION = 3
PATCHLEVEL = 9
-SUBLEVEL = 5
+SUBLEVEL = 6
EXTRAVERSION =
-NAME = Unicycling Gorilla
+NAME = Black Squirrel Wakeup Call
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index afed28e..27f3604 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -121,7 +121,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all -DZIMAGE
+asflags-y := -DZIMAGE
# Supply kernel BSS size to the decompressor via a linker symbol.
KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 6179d94..3115e31 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -11,6 +11,7 @@
#include <asm/mach-types.h>
.section ".start", "ax"
+ .arch armv4
__SA1100_start:
diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
index 089c560..92b5689 100644
--- a/arch/arm/boot/compressed/head-shark.S
+++ b/arch/arm/boot/compressed/head-shark.S
@@ -18,6 +18,7 @@
.section ".start", "ax"
+ .arch armv4
b __beginning
__ofw_data: .long 0 @ the number of memory blocks
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fe4d9c3..6938559 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -11,6 +11,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
+ .arch armv7-a
/*
* Debugging stuff
*
diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h
index 968c0a1..209e650 100644
--- a/arch/arm/include/asm/percpu.h
+++ b/arch/arm/include/asm/percpu.h
@@ -30,8 +30,15 @@ static inline void set_my_cpu_offset(unsigned long off)
static inline unsigned long __my_cpu_offset(void)
{
unsigned long off;
- /* Read TPIDRPRW */
- asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory");
+ register unsigned long *sp asm ("sp");
+
+ /*
+ * Read TPIDRPRW.
+ * We want to allow caching the value, so avoid using volatile and
+ * instead use a fake stack read to hazard against barrier().
+ */
+ asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : "Q" (*sp));
+
return off;
}
#define __my_cpu_offset __my_cpu_offset()
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 79282eb..606b9538 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -13,6 +13,7 @@
#include <linux/cpu.h>
#include <linux/cpumask.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/node.h>
@@ -200,6 +201,7 @@ static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {}
* cpu topology table
*/
struct cputopo_arm cpu_topology[NR_CPUS];
+EXPORT_SYMBOL_GPL(cpu_topology);
const struct cpumask *cpu_coregroup_mask(int cpu)
{
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index acb0187..4695d5f 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -41,13 +41,3 @@ void __init qnap_dt_ts219_init(void)
pm_power_off = qnap_tsx1x_power_off;
}
-
-/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */
-static int __init ts219_pci_init(void)
-{
- if (machine_is_ts219())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(ts219_pci_init);
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index fb3245e..6e11f78 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -175,6 +175,7 @@ extern const char *powerpc_base_platform;
#define CPU_FTR_BCTAR LONG_ASM_CONST(0x0100000000000000)
#define CPU_FTR_HAS_PPR LONG_ASM_CONST(0x0200000000000000)
#define CPU_FTR_DAWR LONG_ASM_CONST(0x0400000000000000)
+#define CPU_FTR_DABRX LONG_ASM_CONST(0x0800000000000000)
#ifndef __ASSEMBLY__
@@ -391,19 +392,20 @@ extern const char *powerpc_base_platform;
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_201 | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA | \
CPU_FTR_CP_USE_DCBTZ | CPU_FTR_STCX_CHECKS_ADDRESS | \
- CPU_FTR_HVMODE)
+ CPU_FTR_HVMODE | CPU_FTR_DABRX)
#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_PURR | \
- CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB)
+ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_DABRX)
#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | \
CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD | \
- CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR)
+ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR | \
+ CPU_FTR_DABRX)
#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\
CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -412,7 +414,7 @@ extern const char *powerpc_base_platform;
CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \
CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | \
- CPU_FTR_VMX_COPY | CPU_FTR_HAS_PPR)
+ CPU_FTR_VMX_COPY | CPU_FTR_HAS_PPR | CPU_FTR_DABRX)
#define CPU_FTRS_POWER8 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\
CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -427,14 +429,15 @@ extern const char *powerpc_base_platform;
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_PAUSE_ZERO | CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \
- CPU_FTR_UNALIGNED_LD_STD)
+ CPU_FTR_UNALIGNED_LD_STD | CPU_FTR_DABRX)
#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | \
- CPU_FTR_PURR | CPU_FTR_REAL_LE)
+ CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_DABRX)
#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2)
#define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \
- CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | CPU_FTR_ICSWX)
+ CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | \
+ CPU_FTR_ICSWX | CPU_FTR_DABRX )
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 3d6b410..ccfe2c8 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -29,6 +29,7 @@ struct rtc_time;
struct file;
struct pci_controller;
struct kimage;
+struct pci_host_bridge;
struct machdep_calls {
char *name;
@@ -107,6 +108,8 @@ struct machdep_calls {
void (*pcibios_fixup)(void);
int (*pci_probe_mode)(struct pci_bus *);
void (*pci_irq_fixup)(struct pci_dev *dev);
+ int (*pcibios_root_bridge_prepare)(struct pci_host_bridge
+ *bridge);
/* To setup PHBs when using automatic OF platform driver for PCI */
int (*pci_setup_phb)(struct pci_controller *host);
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 025a130..bb21f5a 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -154,6 +154,8 @@ struct pci_dn {
int pci_ext_config_space; /* for pci devices */
+ int force_32bit_msi:1;
+
struct pci_dev *pcidev; /* back-pointer to the pci device */
#ifdef CONFIG_EEH
struct eeh_dev *edev; /* eeh device */
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index fa12ae4..9b315e5 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -30,6 +30,7 @@
#include <linux/irq.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/vgaarb.h>
#include <asm/processor.h>
#include <asm/io.h>
@@ -844,6 +845,14 @@ int pci_proc_domain(struct pci_bus *bus)
return 1;
}
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ if (ppc_md.pcibios_root_bridge_prepare)
+ return ppc_md.pcibios_root_bridge_prepare(bridge);
+
+ return 0;
+}
+
/* This header fixup will do the resource fixup for all devices as they are
* probed, but not for bridge ranges
*/
@@ -1725,3 +1734,15 @@ static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl);
+
+static void fixup_vga(struct pci_dev *pdev)
+{
+ u16 cmd;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+ if ((cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) || !vga_default_device())
+ vga_set_default_device(pdev);
+
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_DISPLAY_VGA, 8, fixup_vga);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 16e77a8..9600c36 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -392,7 +392,8 @@ static inline int __set_dabr(unsigned long dabr, unsigned long dabrx)
static inline int __set_dabr(unsigned long dabr, unsigned long dabrx)
{
mtspr(SPRN_DABR, dabr);
- mtspr(SPRN_DABRX, dabrx);
+ if (cpu_has_feature(CPU_FTR_DABRX))
+ mtspr(SPRN_DABRX, dabrx);
return 0;
}
#else
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 1c22b2d..29857c6 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1151,7 +1151,7 @@ void alignment_exception(struct pt_regs *regs)
local_irq_enable();
if (tm_abort_check(regs, TM_CAUSE_ALIGNMENT | TM_CAUSE_PERSISTENT))
- goto bail;
+ return;
/* we don't implement logging of alignment exceptions */
if (!(current->thread.align_ctl & PR_UNALIGN_SIGBUS))
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 65362e9..9d858b0 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1528,7 +1528,7 @@ static void perf_event_interrupt(struct pt_regs *regs)
}
}
}
- if ((!found) && printk_ratelimit())
+ if (!found && !nmi && printk_ratelimit())
printk(KERN_WARNING "Can't find PMC that caused IRQ\n");
/*
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 19506f9..b456b15 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -83,7 +83,11 @@ static int pseries_eeh_init(void)
ibm_configure_pe = rtas_token("ibm,configure-pe");
ibm_configure_bridge = rtas_token("ibm,configure-bridge");
- /* necessary sanity check */
+ /*
+ * Necessary sanity check. We needn't check "get-config-addr-info"
+ * and its variant since the old firmware probably support address
+ * of domain/bus/slot/function for EEH RTAS operations.
+ */
if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) {
pr_warning("%s: RTAS service <ibm,set-eeh-option> invalid\n",
__func__);
@@ -102,12 +106,6 @@ static int pseries_eeh_init(void)
pr_warning("%s: RTAS service <ibm,slot-error-detail> invalid\n",
__func__);
return -EINVAL;
- } else if (ibm_get_config_addr_info2 == RTAS_UNKNOWN_SERVICE &&
- ibm_get_config_addr_info == RTAS_UNKNOWN_SERVICE) {
- pr_warning("%s: RTAS service <ibm,get-config-addr-info2> and "
- "<ibm,get-config-addr-info> invalid\n",
- __func__);
- return -EINVAL;
} else if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE &&
ibm_configure_bridge == RTAS_UNKNOWN_SERVICE) {
pr_warning("%s: RTAS service <ibm,configure-pe> and "
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index e5b0847..77b18a2 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -24,6 +24,7 @@ static int query_token, change_token;
#define RTAS_RESET_FN 2
#define RTAS_CHANGE_MSI_FN 3
#define RTAS_CHANGE_MSIX_FN 4
+#define RTAS_CHANGE_32MSI_FN 5
static struct pci_dn *get_pdn(struct pci_dev *pdev)
{
@@ -58,7 +59,8 @@ static int rtas_change_msi(struct pci_dn *pdn, u32 func, u32 num_irqs)
seq_num = 1;
do {
- if (func == RTAS_CHANGE_MSI_FN || func == RTAS_CHANGE_MSIX_FN)
+ if (func == RTAS_CHANGE_MSI_FN || func == RTAS_CHANGE_MSIX_FN ||
+ func == RTAS_CHANGE_32MSI_FN)
rc = rtas_call(change_token, 6, 4, rtas_ret, addr,
BUID_HI(buid), BUID_LO(buid),
func, num_irqs, seq_num);
@@ -392,6 +394,25 @@ static int check_msix_entries(struct pci_dev *pdev)
return 0;
}
+static void rtas_hack_32bit_msi_gen2(struct pci_dev *pdev)
+{
+ u32 addr_hi, addr_lo;
+ int pos;
+
+ /*
+ * We should only get in here for IODA1 configs. This is based on the
+ * fact that we using RTAS for MSIs, we don't have the 32 bit MSI RTAS
+ * support, and we are in a PCIe Gen2 slot.
+ */
+ dev_info(&pdev->dev,
+ "rtas_msi: No 32 bit MSI firmware support, forcing 32 bit MSI\n");
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+ pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_HI, &addr_hi);
+ addr_lo = 0xffff0000 | ((addr_hi >> (48 - 32)) << 4);
+ pci_write_config_dword(pdev, pos + PCI_MSI_ADDRESS_LO, addr_lo);
+ pci_write_config_dword(pdev, pos + PCI_MSI_ADDRESS_HI, 0);
+}
+
static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type)
{
struct pci_dn *pdn;
@@ -399,6 +420,7 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type)
struct msi_desc *entry;
struct msi_msg msg;
int nvec = nvec_in;
+ int use_32bit_msi_hack = 0;
pdn = get_pdn(pdev);
if (!pdn)
@@ -426,12 +448,31 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type)
*/
again:
if (type == PCI_CAP_ID_MSI) {
- rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec);
+ if (pdn->force_32bit_msi) {
+ rc = rtas_change_msi(pdn, RTAS_CHANGE_32MSI_FN, nvec);
+ if (rc < 0) {
+ /*
+ * We only want to run the 32 bit MSI hack below if
+ * the max bus speed is Gen2 speed
+ */
+ if (pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT)
+ return rc;
+
+ use_32bit_msi_hack = 1;
+ }
+ } else
+ rc = -1;
+
+ if (rc < 0)
+ rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec);
if (rc < 0) {
pr_debug("rtas_msi: trying the old firmware call.\n");
rc = rtas_change_msi(pdn, RTAS_CHANGE_FN, nvec);
}
+
+ if (use_32bit_msi_hack && rc > 0)
+ rtas_hack_32bit_msi_gen2(pdev);
} else
rc = rtas_change_msi(pdn, RTAS_CHANGE_MSIX_FN, nvec);
@@ -512,3 +553,13 @@ static int rtas_msi_init(void)
return 0;
}
arch_initcall(rtas_msi_init);
+
+static void quirk_radeon(struct pci_dev *dev)
+{
+ struct pci_dn *pdn = get_pdn(dev);
+
+ if (pdn)
+ pdn->force_32bit_msi = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon);
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index 0b580f4..5f93856 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -108,3 +108,56 @@ static void fixup_winbond_82c105(struct pci_dev* dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
fixup_winbond_82c105);
+
+int pseries_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ struct device_node *dn, *pdn;
+ struct pci_bus *bus;
+ const uint32_t *pcie_link_speed_stats;
+
+ bus = bridge->bus;
+
+ dn = pcibios_get_phb_of_node(bus);
+ if (!dn)
+ return 0;
+
+ for (pdn = dn; pdn != NULL; pdn = of_get_next_parent(pdn)) {
+ pcie_link_speed_stats = (const uint32_t *) of_get_property(pdn,
+ "ibm,pcie-link-speed-stats", NULL);
+ if (pcie_link_speed_stats)
+ break;
+ }
+
+ of_node_put(pdn);
+
+ if (!pcie_link_speed_stats) {
+ pr_err("no ibm,pcie-link-speed-stats property\n");
+ return 0;
+ }
+
+ switch (pcie_link_speed_stats[0]) {
+ case 0x01:
+ bus->max_bus_speed = PCIE_SPEED_2_5GT;
+ break;
+ case 0x02:
+ bus->max_bus_speed = PCIE_SPEED_5_0GT;
+ break;
+ default:
+ bus->max_bus_speed = PCI_SPEED_UNKNOWN;
+ break;
+ }
+
+ switch (pcie_link_speed_stats[1]) {
+ case 0x01:
+ bus->cur_bus_speed = PCIE_SPEED_2_5GT;
+ break;
+ case 0x02:
+ bus->cur_bus_speed = PCIE_SPEED_5_0GT;
+ break;
+ default:
+ bus->cur_bus_speed = PCI_SPEED_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 9a3dda0..b79393d 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -60,4 +60,8 @@ extern int dlpar_detach_node(struct device_node *);
/* Snooze Delay, pseries_idle */
DECLARE_PER_CPU(long, smt_snooze_delay);
+/* PCI root bridge prepare function override for pseries */
+struct pci_host_bridge;
+int pseries_root_bridge_prepare(struct pci_host_bridge *bridge);
+
#endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 8bcc9ca..bf34cc9 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -466,6 +466,8 @@ static void __init pSeries_setup_arch(void)
else
ppc_md.enable_pmcs = power4_enable_pmcs;
+ ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare;
+
if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
long rc;
if ((rc = pSeries_enable_reloc_on_exc()) != H_SUCCESS) {
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index fd80015..39a1c71 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -1063,11 +1063,12 @@ static inline pte_t ptep_modify_prot_start(struct mm_struct *mm,
unsigned long address,
pte_t *ptep)
{
+ pgste_t pgste;
pte_t pte;
mm->context.flush_mm = 1;
if (mm_has_pgste(mm))
- pgste_get_lock(ptep);
+ pgste = pgste_get_lock(ptep);
pte = *ptep;
if (!mm_exclusive(mm))
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 901177d..1dc3d7c 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -617,7 +617,9 @@ int pcibios_add_device(struct pci_dev *dev)
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
- data = phys_to_virt(pa_data);
+ data = ioremap(pa_data, sizeof(*rom));
+ if (!data)
+ return -ENOMEM;
if (data->type == SETUP_PCI) {
rom = (struct pci_setup_rom *)data;
@@ -634,6 +636,7 @@ int pcibios_add_device(struct pci_dev *dev)
}
}
pa_data = data->next;
+ iounmap(data);
}
return 0;
}
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 22c800a..96c4e85 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -17,6 +17,7 @@
#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/irq_work.h>
+#include <linux/tick.h>
#include <asm/paravirt.h>
#include <asm/desc.h>
@@ -436,6 +437,13 @@ static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
cpu_bringup();
+ /*
+ * commit 4b0c0f294 (tick: Cleanup NOHZ per cpu data on cpu down)
+ * clears certain data that the cpu_idle loop (which called us
+ * and that we return from) expects. The only way to get that
+ * data back is to call:
+ */
+ tick_nohz_idle_enter();
}
#else /* !CONFIG_HOTPLUG_CPU */
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index 557e58d..391010a 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -269,11 +269,13 @@ int acpi_bus_init_power(struct acpi_device *device)
if (result)
return result;
} else if (state == ACPI_STATE_UNKNOWN) {
- /* No power resources and missing _PSC? Try to force D0. */
+ /*
+ * No power resources and missing _PSC? Cross fingers and make
+ * it D0 in hope that this is what the BIOS put the device into.
+ * [We tried to force D0 here by executing _PS0, but that broke
+ * Toshiba P870-303 in a nasty way.]
+ */
state = ACPI_STATE_D0;
- result = acpi_dev_pm_explicit_set(device, state);
- if (result)
- return result;
}
device->power.state = state;
return 0;
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 313f959..81a9335 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -447,6 +447,22 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13 - 2000 Notebook PC"),
},
},
+ {
+ .callback = video_ignore_initial_backlight,
+ .ident = "HP Pavilion g6 Notebook PC",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion g6 Notebook PC"),
+ },
+ },
+ {
+ .callback = video_ignore_initial_backlight,
+ .ident = "HP Pavilion m4",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion m4 Notebook PC"),
+ },
+ },
{}
};
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index 57a8774..bb5939b 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -347,11 +347,11 @@ static u32 get_cur_val(const struct cpumask *mask)
switch (per_cpu(acfreq_data, cpumask_first(mask))->cpu_feature) {
case SYSTEM_INTEL_MSR_CAPABLE:
cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
- cmd.addr.msr.reg = MSR_IA32_PERF_STATUS;
+ cmd.addr.msr.reg = MSR_IA32_PERF_CTL;
break;
case SYSTEM_AMD_MSR_CAPABLE:
cmd.type = SYSTEM_AMD_MSR_CAPABLE;
- cmd.addr.msr.reg = MSR_AMD_PERF_STATUS;
+ cmd.addr.msr.reg = MSR_AMD_PERF_CTL;
break;
case SYSTEM_IO_CAPABLE:
cmd.type = SYSTEM_IO_CAPABLE;
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 1734fee..71bf4ec 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -1566,10 +1566,12 @@ static void dma_tc_handle(struct d40_chan *d40c)
return;
}
- if (d40_queue_start(d40c) == NULL)
+ if (d40_queue_start(d40c) == NULL) {
d40c->busy = false;
- pm_runtime_mark_last_busy(d40c->base->dev);
- pm_runtime_put_autosuspend(d40c->base->dev);
+
+ pm_runtime_mark_last_busy(d40c->base->dev);
+ pm_runtime_put_autosuspend(d40c->base->dev);
+ }
d40_desc_remove(d40d);
d40_desc_done(d40c, d40d);
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index a6a8643..8bcce78 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -1054,7 +1054,7 @@ EXPORT_SYMBOL(drm_vblank_off);
*/
void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
{
- /* vblank is not initialized (IRQ not installed ?) */
+ /* vblank is not initialized (IRQ not installed ?), or has been freed */
if (!dev->num_crtcs)
return;
/*
@@ -1076,6 +1076,10 @@ void drm_vblank_post_modeset(struct drm_device *dev, int crtc)
{
unsigned long irqflags;
+ /* vblank is not initialized (IRQ not installed ?), or has been freed */
+ if (!dev->num_crtcs)
+ return;
+
if (dev->vblank_inmodeset[crtc]) {
spin_lock_irqsave(&dev->vbl_lock, irqflags);
dev->vblank_disable_allowed = 1;
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
index 2590cac..8d07078 100644
--- a/drivers/gpu/drm/gma500/framebuffer.c
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -772,8 +772,8 @@ void psb_modeset_init(struct drm_device *dev)
for (i = 0; i < dev_priv->num_pipe; i++)
psb_intel_crtc_init(dev, i, mode_dev);
- dev->mode_config.max_width = 2048;
- dev->mode_config.max_height = 2048;
+ dev->mode_config.max_width = 4096;
+ dev->mode_config.max_height = 4096;
psb_setup_outputs(dev);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 73cb479..db2cff3 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -91,14 +91,11 @@ i915_gem_wait_for_error(struct i915_gpu_error *error)
{
int ret;
-#define EXIT_COND (!i915_reset_in_progress(error))
+#define EXIT_COND (!i915_reset_in_progress(error) || \
+ i915_terminally_wedged(error))
if (EXIT_COND)
return 0;
- /* GPU is already declared terminally dead, give up. */
- if (i915_terminally_wedged(error))
- return -EIO;
-
/*
* Only wait 10 seconds for the gpu reset to complete to avoid hanging
* userspace. If it takes that long something really bad is going on and
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c2d173a..2ab65b4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7960,6 +7960,21 @@ static void intel_set_config_restore_state(struct drm_device *dev,
}
}
+static bool
+is_crtc_connector_off(struct drm_crtc *crtc, struct drm_connector *connectors,
+ int num_connectors)
+{
+ int i;
+
+ for (i = 0; i < num_connectors; i++)
+ if (connectors[i].encoder &&
+ connectors[i].encoder->crtc == crtc &&
+ connectors[i].dpms != DRM_MODE_DPMS_ON)
+ return true;
+
+ return false;
+}
+
static void
intel_set_config_compute_mode_changes(struct drm_mode_set *set,
struct intel_set_config *config)
@@ -7967,7 +7982,11 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set,
/* We should be able to check here if the fb has the same properties
* and then just flip_or_move it */
- if (set->crtc->fb != set->fb) {
+ if (set->connectors != NULL &&
+ is_crtc_connector_off(set->crtc, *set->connectors,
+ set->num_connectors)) {
+ config->mode_changed = true;
+ } else if (set->crtc->fb != set->fb) {
/* If we have no fb then treat it as a full mode set */
if (set->crtc->fb == NULL) {
DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
@@ -7979,8 +7998,9 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set,
} else if (set->fb->bits_per_pixel !=
set->crtc->fb->bits_per_pixel) {
config->mode_changed = true;
- } else
+ } else {
config->fb_changed = true;
+ }
}
if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index e0d6985..e2ca9c1 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -803,10 +803,10 @@ static const struct dmi_system_id intel_no_lvds[] = {
},
{
.callback = intel_no_lvds_dmi_callback,
- .ident = "Hewlett-Packard HP t5740e Thin Client",
+ .ident = "Hewlett-Packard HP t5740",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP t5740e Thin Client"),
+ DMI_MATCH(DMI_PRODUCT_NAME, " t5740"),
},
},
{
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index d6df786..cdd78ca 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1770,7 +1770,7 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
* Assume that the preferred modes are
* arranged in priority order.
*/
- intel_ddc_get_modes(connector, intel_sdvo->i2c);
+ intel_ddc_get_modes(connector, &intel_sdvo->ddc);
if (list_empty(&connector->probed_modes) == false)
goto end;
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index 713dd70..407e257 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1041,13 +1041,14 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
else
hi_pri_lvl = 5;
- WREG8(0x1fde, 0x06);
- WREG8(0x1fdf, hi_pri_lvl);
+ WREG8(MGAREG_CRTCEXT_INDEX, 0x06);
+ WREG8(MGAREG_CRTCEXT_DATA, hi_pri_lvl);
} else {
+ WREG8(MGAREG_CRTCEXT_INDEX, 0x06);
if (mdev->reg_1e24 >= 0x01)
- WREG8(0x1fdf, 0x03);
+ WREG8(MGAREG_CRTCEXT_DATA, 0x03);
else
- WREG8(0x1fdf, 0x04);
+ WREG8(MGAREG_CRTCEXT_DATA, 0x04);
}
}
return 0;
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index 4552d4a..6cf2b52 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -667,6 +667,8 @@ atombios_digital_setup(struct drm_encoder *encoder, int action)
int
atombios_get_encoder_mode(struct drm_encoder *encoder)
{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct drm_connector *connector;
struct radeon_connector *radeon_connector;
@@ -693,7 +695,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */
if (drm_detect_hdmi_monitor(radeon_connector->edid) &&
- radeon_audio)
+ radeon_audio &&
+ !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */
return ATOM_ENCODER_MODE_HDMI;
else if (radeon_connector->use_digital)
return ATOM_ENCODER_MODE_DVI;
@@ -704,7 +707,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
case DRM_MODE_CONNECTOR_HDMIA:
default:
if (drm_detect_hdmi_monitor(radeon_connector->edid) &&
- radeon_audio)
+ radeon_audio &&
+ !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */
return ATOM_ENCODER_MODE_HDMI;
else
return ATOM_ENCODER_MODE_DVI;
@@ -718,7 +722,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
(dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
return ATOM_ENCODER_MODE_DP;
else if (drm_detect_hdmi_monitor(radeon_connector->edid) &&
- radeon_audio)
+ radeon_audio &&
+ !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */
return ATOM_ENCODER_MODE_HDMI;
else
return ATOM_ENCODER_MODE_DVI;
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 0ea6bdf..f8e36ac 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -3728,6 +3728,12 @@ static int evergreen_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = r600_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -3876,10 +3882,6 @@ int evergreen_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
@@ -3944,8 +3946,7 @@ void evergreen_fini(struct radeon_device *rdev)
void evergreen_pcie_gen2_enable(struct radeon_device *rdev)
{
- u32 link_width_cntl, speed_cntl, mask;
- int ret;
+ u32 link_width_cntl, speed_cntl;
if (radeon_pcie_gen2 == 0)
return;
@@ -3960,11 +3961,8 @@ void evergreen_pcie_gen2_enable(struct radeon_device *rdev)
if (ASIC_IS_X2(rdev))
return;
- ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask);
- if (ret != 0)
- return;
-
- if (!(mask & DRM_PCIE_SPEED_50))
+ if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) &&
+ (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT))
return;
speed_cntl = RREG32_PCIE_P(PCIE_LC_SPEED_CNTL);
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 0a32d89..d7968b8 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1711,6 +1711,12 @@ static int cayman_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = r600_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -1857,10 +1863,6 @@ int cayman_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
ring->ring_obj = NULL;
r600_ring_init(rdev, ring, 1024 * 1024);
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 4973bff..d0314ec 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -3869,6 +3869,12 @@ static int r100_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r100_irq_set(rdev);
rdev->config.r100.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -4024,9 +4030,6 @@ int r100_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index c60350e..b9b776f 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -1382,6 +1382,12 @@ static int r300_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r100_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -1516,9 +1522,6 @@ int r300_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index 6fce2eb..4e796ec 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -265,6 +265,12 @@ static int r420_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r100_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -411,10 +417,6 @@ int r420_init(struct radeon_device *rdev)
if (r) {
return r;
}
- r = radeon_irq_kms_init(rdev);
- if (r) {
- return r;
- }
/* Memory manager */
r = radeon_bo_init(rdev);
if (r) {
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index f795a4e..e1aece7 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -194,6 +194,12 @@ static int r520_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
rs600_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -297,9 +303,6 @@ int r520_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 0740db3..bac1e2ac 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2940,6 +2940,12 @@ static int r600_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = r600_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -3094,10 +3100,6 @@ int r600_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
@@ -4351,8 +4353,6 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev)
{
u32 link_width_cntl, lanes, speed_cntl, training_cntl, tmp;
u16 link_cntl2;
- u32 mask;
- int ret;
if (radeon_pcie_gen2 == 0)
return;
@@ -4371,11 +4371,8 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev)
if (rdev->family <= CHIP_R600)
return;
- ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask);
- if (ret != 0)
- return;
-
- if (!(mask & DRM_PCIE_SPEED_50))
+ if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) &&
+ (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT))
return;
speed_cntl = RREG32_PCIE_P(PCIE_LC_SPEED_CNTL);
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index 73051ce..233a9b9 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -417,6 +417,12 @@ static int rs400_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r100_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -535,9 +541,6 @@ int rs400_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 46fa1b0..670b555 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -923,6 +923,12 @@ static int rs600_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
rs600_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -1047,9 +1053,6 @@ int rs600_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 5706d2a..fad6633 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -628,6 +628,12 @@ static int rs690_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
rs600_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -753,9 +759,6 @@ int rs690_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index ffcba73..21c7d7b 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -532,6 +532,12 @@ static int rv515_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
rs600_irq_set(rdev);
rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
/* 1M ring buffer */
@@ -662,9 +668,6 @@ int rv515_init(struct radeon_device *rdev)
r = radeon_fence_driver_init(rdev);
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
/* Memory manager */
r = radeon_bo_init(rdev);
if (r)
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index d63fe1d..c872d2b 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -1041,6 +1041,12 @@ static int rv770_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = r600_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -1180,10 +1186,6 @@ int rv770_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
@@ -1238,8 +1240,6 @@ static void rv770_pcie_gen2_enable(struct radeon_device *rdev)
{
u32 link_width_cntl, lanes, speed_cntl, tmp;
u16 link_cntl2;
- u32 mask;
- int ret;
if (radeon_pcie_gen2 == 0)
return;
@@ -1254,11 +1254,8 @@ static void rv770_pcie_gen2_enable(struct radeon_device *rdev)
if (ASIC_IS_X2(rdev))
return;
- ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask);
- if (ret != 0)
- return;
-
- if (!(mask & DRM_PCIE_SPEED_50))
+ if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) &&
+ (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT))
return;
DRM_INFO("enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0\n");
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index aefefd5..a964a96 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -4374,6 +4374,12 @@ static int si_startup(struct radeon_device *rdev)
}
/* Enable IRQ */
+ if (!rdev->irq.installed) {
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ }
+
r = si_irq_init(rdev);
if (r) {
DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -4534,10 +4540,6 @@ int si_init(struct radeon_device *rdev)
if (r)
return r;
- r = radeon_irq_kms_init(rdev);
- if (r)
- return r;
-
ring = &rdev->ring[RADEON_RING_TYPE_GFX_INDEX];
ring->ring_obj = NULL;
r600_ring_init(rdev, ring, 1024 * 1024);
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 71bcba8a..1468be8 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -332,26 +332,68 @@ static int adm1021_detect(struct i2c_client *client,
man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID);
+ if (man_id < 0 || dev_id < 0)
+ return -ENODEV;
+
if (man_id == 0x4d && dev_id == 0x01)
type_name = "max1617a";
else if (man_id == 0x41) {
if ((dev_id & 0xF0) == 0x30)
type_name = "adm1023";
- else
+ else if ((dev_id & 0xF0) == 0x00)
type_name = "adm1021";
+ else
+ return -ENODEV;
} else if (man_id == 0x49)
type_name = "thmc10";
else if (man_id == 0x23)
type_name = "gl523sm";
else if (man_id == 0x54)
type_name = "mc1066";
- /* LM84 Mfr ID in a different place, and it has more unused bits */
- else if (conv_rate == 0x00
- && (config & 0x7F) == 0x00
- && (status & 0xAB) == 0x00)
- type_name = "lm84";
- else
- type_name = "max1617";
+ else {
+ int lte, rte, lhi, rhi, llo, rlo;
+
+ /* extra checks for LM84 and MAX1617 to avoid misdetections */
+
+ llo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(0));
+ rlo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(1));
+
+ /* fail if any of the additional register reads failed */
+ if (llo < 0 || rlo < 0)
+ return -ENODEV;
+
+ lte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(0));
+ rte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(1));
+ lhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(0));
+ rhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(1));
+
+ /*
+ * Fail for negative temperatures and negative high limits.
+ * This check also catches read errors on the tested registers.
+ */
+ if ((s8)lte < 0 || (s8)rte < 0 || (s8)lhi < 0 || (s8)rhi < 0)
+ return -ENODEV;
+
+ /* fail if all registers hold the same value */
+ if (lte == rte && lte == lhi && lte == rhi && lte == llo
+ && lte == rlo)
+ return -ENODEV;
+
+ /*
+ * LM84 Mfr ID is in a different place,
+ * and it has more unused bits.
+ */
+ if (conv_rate == 0x00
+ && (config & 0x7F) == 0x00
+ && (status & 0xAB) == 0x00) {
+ type_name = "lm84";
+ } else {
+ /* fail if low limits are larger than high limits */
+ if ((s8)llo > lhi || (s8)rlo > rhi)
+ return -ENODEV;
+ type_name = "max1617";
+ }
+ }
pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n",
type_name, i2c_adapter_id(adapter), client->addr);
diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c
index a884252..e76d4ac 100644
--- a/drivers/iio/frequency/adf4350.c
+++ b/drivers/iio/frequency/adf4350.c
@@ -212,7 +212,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq)
(pdata->r2_user_settings & (ADF4350_REG2_PD_POLARITY_POS |
ADF4350_REG2_LDP_6ns | ADF4350_REG2_LDF_INT_N |
ADF4350_REG2_CHARGE_PUMP_CURR_uA(5000) |
- ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x9)));
+ ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x3)));
st->regs[ADF4350_REG3] = pdata->r3_user_settings &
(ADF4350_REG3_12BIT_CLKDIV(0xFFF) |
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index b289915..8ff1a2d 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -279,7 +279,7 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
s64 raw64 = raw;
int ret;
- ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_SCALE);
+ ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_OFFSET);
if (ret == 0)
raw64 += offset;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 5427787..563771f 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -988,7 +988,6 @@ int pci_setup_device(struct pci_dev *dev)
dev->sysdata = dev->bus->sysdata;
dev->dev.parent = dev->bus->bridge;
dev->dev.bus = &pci_bus_type;
- dev->dev.type = &pci_dev_type;
dev->hdr_type = hdr_type & 0x7f;
dev->multifunction = !!(hdr_type & 0x80);
dev->error_state = pci_channel_io_normal;
@@ -1208,6 +1207,7 @@ struct pci_dev *alloc_pci_dev(void)
return NULL;
INIT_LIST_HEAD(&dev->bus_list);
+ dev->dev.type = &pci_dev_type;
return dev;
}
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 1a779bb..72184cc 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -679,7 +679,7 @@ static int hp_wmi_rfkill_setup(struct platform_device *device)
}
rfkill_init_sw_state(gps_rfkill,
hp_wmi_get_sw_state(HPWMI_GPS));
- rfkill_set_hw_state(bluetooth_rfkill,
+ rfkill_set_hw_state(gps_rfkill,
hp_wmi_get_hw_state(HPWMI_GPS));
err = rfkill_register(gps_rfkill);
if (err)
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index e8d7768..1e04b79 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -196,9 +196,9 @@ static void dwc3_pci_remove(struct pci_dev *pci)
{
struct dwc3_pci *glue = pci_get_drvdata(pci);
+ platform_device_unregister(glue->dwc3);
platform_device_unregister(glue->usb2_phy);
platform_device_unregister(glue->usb3_phy);
- platform_device_unregister(glue->dwc3);
pci_set_drvdata(pci, NULL);
pci_disable_device(pci);
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 82e160e..bab9630 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1637,10 +1637,20 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
dep = dwc->eps[epnum];
- dwc3_free_trb_pool(dep);
- if (epnum != 0 && epnum != 1)
+ /*
+ * Physical endpoints 0 and 1 are special; they form the
+ * bi-directional USB endpoint 0.
+ *
+ * For those two physical endpoints, we don't allocate a TRB
+ * pool nor do we add them the endpoints list. Due to that, we
+ * shouldn't do these two operations otherwise we would end up
+ * with all sorts of bugs when removing dwc3.ko.
+ */
+ if (epnum != 0 && epnum != 1) {
+ dwc3_free_trb_pool(dep);
list_del(&dep->endpoint.ep_list);
+ }
kfree(dep);
}
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 010f686..5a00ef3 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -213,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask)
}
static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 };
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
/* carryover low/fullspeed bandwidth that crosses uframe boundries */
static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fd26470e428..905f38c 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1827,6 +1827,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
spin_unlock_irqrestore(&xhci->lock, flags);
+ if (!xhci->rh_bw)
+ goto no_bw;
+
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
for (i = 0; i < num_ports; i++) {
struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
@@ -1845,6 +1848,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
}
+no_bw:
xhci->num_usb2_ports = 0;
xhci->num_usb3_ports = 0;
xhci->num_active_eps = 0;
@@ -2256,6 +2260,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
u32 page_size, temp;
int i;
+ INIT_LIST_HEAD(&xhci->lpm_failed_devs);
+ INIT_LIST_HEAD(&xhci->cancel_cmd_list);
+
page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
for (i = 0; i < 16; i++) {
@@ -2334,7 +2341,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
if (!xhci->cmd_ring)
goto fail;
- INIT_LIST_HEAD(&xhci->cancel_cmd_list);
xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
(unsigned long long)xhci->cmd_ring->first_seg->dma);
@@ -2445,8 +2451,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
if (xhci_setup_port_arrays(xhci, flags))
goto fail;
- INIT_LIST_HEAD(&xhci->lpm_failed_devs);
-
/* Enable USB 3.0 device notifications for function remote wake, which
* is necessary for allowing USB 3.0 devices to do remote wakeup from
* U3 (device suspend).
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1a30c38..cc24e39 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -221,6 +221,14 @@ static void xhci_pci_remove(struct pci_dev *dev)
static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ /*
+ * Systems with the TI redriver that loses port status change events
+ * need to have the registers polled during D3, so avoid D3cold.
+ */
+ if (xhci_compliance_mode_recovery_timer_quirk_check())
+ pdev->no_d3cold = true;
return xhci_suspend(xhci);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 53b8f89..82b0809 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -466,7 +466,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
* Systems:
* Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
*/
-static bool compliance_mode_recovery_timer_quirk_check(void)
+bool xhci_compliance_mode_recovery_timer_quirk_check(void)
{
const char *dmi_product_name, *dmi_sys_vendor;
@@ -517,7 +517,7 @@ int xhci_init(struct usb_hcd *hcd)
xhci_dbg(xhci, "Finished xhci_init\n");
/* Initializing Compliance Mode Recovery Data If Needed */
- if (compliance_mode_recovery_timer_quirk_check()) {
+ if (xhci_compliance_mode_recovery_timer_quirk_check()) {
xhci->quirks |= XHCI_COMP_MODE_QUIRK;
compliance_mode_recovery_timer_init(xhci);
}
@@ -952,6 +952,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct usb_hcd *secondary_hcd;
int retval = 0;
+ bool comp_timer_running = false;
/* Wait a bit if either of the roothubs need to settle from the
* transition into bus suspend.
@@ -989,6 +990,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
/* If restore operation fails, re-initialize the HC during resume */
if ((temp & STS_SRE) || hibernated) {
+
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ !(xhci_all_ports_seen_u0(xhci))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n");
+ }
+
/* Let the USB core know _both_ roothubs lost power. */
usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
@@ -1031,6 +1039,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
retval = xhci_init(hcd->primary_hcd);
if (retval)
return retval;
+ comp_timer_running = true;
+
xhci_dbg(xhci, "Start the primary HCD\n");
retval = xhci_run(hcd->primary_hcd);
if (!retval) {
@@ -1072,7 +1082,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
* to suffer the Compliance Mode issue again. It doesn't matter if
* ports have entered previously to U0 before system's suspension.
*/
- if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
compliance_mode_recovery_timer_init(xhci);
/* Re-enable port polling. */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 6358271..bde9f22 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1853,4 +1853,7 @@ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
+/* xHCI quirks */
+bool xhci_compliance_mode_recovery_timer_quirk_check(void);
+
#endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 1ce1fcf..6f26fd8 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1232,7 +1232,6 @@ void musb_host_tx(struct musb *musb, u8 epnum)
void __iomem *mbase = musb->mregs;
struct dma_channel *dma;
bool transfer_pending = false;
- static bool use_sg;
musb_ep_select(mbase, epnum);
tx_csr = musb_readw(epio, MUSB_TXCSR);
@@ -1463,9 +1462,9 @@ done:
* NULL.
*/
if (!urb->transfer_buffer)
- use_sg = true;
+ qh->use_sg = true;
- if (use_sg) {
+ if (qh->use_sg) {
/* sg_miter_start is already done in musb_ep_program */
if (!sg_miter_next(&qh->sg_miter)) {
dev_err(musb->controller, "error: sg list empty\n");
@@ -1484,9 +1483,9 @@ done:
qh->segsize = length;
- if (use_sg) {
+ if (qh->use_sg) {
if (offset + length >= urb->transfer_buffer_length)
- use_sg = false;
+ qh->use_sg = false;
}
musb_ep_select(mbase, epnum);
@@ -1552,7 +1551,6 @@ void musb_host_rx(struct musb *musb, u8 epnum)
bool done = false;
u32 status;
struct dma_channel *dma;
- static bool use_sg;
unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG;
musb_ep_select(mbase, epnum);
@@ -1878,12 +1876,12 @@ void musb_host_rx(struct musb *musb, u8 epnum)
* NULL.
*/
if (!urb->transfer_buffer) {
- use_sg = true;
+ qh->use_sg = true;
sg_miter_start(&qh->sg_miter, urb->sg, 1,
sg_flags);
}
- if (use_sg) {
+ if (qh->use_sg) {
if (!sg_miter_next(&qh->sg_miter)) {
dev_err(musb->controller, "error: sg list empty\n");
sg_miter_stop(&qh->sg_miter);
@@ -1913,8 +1911,8 @@ finish:
urb->actual_length += xfer_len;
qh->offset += xfer_len;
if (done) {
- if (use_sg)
- use_sg = false;
+ if (qh->use_sg)
+ qh->use_sg = false;
if (urb->status == -EINPROGRESS)
urb->status = status;
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 5a9c8fe..738f7eb 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -74,6 +74,7 @@ struct musb_qh {
u16 frame; /* for periodic schedule */
unsigned iso_idx; /* in urb->iso_frame_desc[] */
struct sg_mapping_iter sg_miter; /* for highmem in PIO mode */
+ bool use_sg; /* to track urb using sglist */
};
/* map from control or bulk queue head to the first qh on that ring */
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 4775f82..513d45f 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -43,7 +43,7 @@
#define DRIVER_NAME "ark3116"
/* usb timeout of 1 second */
-#define ARK_TIMEOUT (1*HZ)
+#define ARK_TIMEOUT 1000
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x6547, 0x0232) },
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index ba7352e..9b145d3 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -65,6 +65,7 @@ static const struct usb_device_id id_table_earthmate[] = {
static const struct usb_device_id id_table_cyphidcomrs232[] = {
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ } /* Terminating entry */
};
@@ -78,6 +79,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
{ } /* Terminating entry */
};
@@ -230,6 +232,12 @@ static struct usb_serial_driver * const serial_drivers[] = {
* Cypress serial helper functions
*****************************************************************************/
+/* FRWD Dongle hidcom needs to skip reset and speed checks */
+static inline bool is_frwd(struct usb_device *dev)
+{
+ return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
+ (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
+}
static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
{
@@ -239,6 +247,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
if (unstable_bauds)
return new_rate;
+ /* FRWD Dongle uses 115200 bps */
+ if (is_frwd(port->serial->dev))
+ return new_rate;
+
/*
* The general purpose firmware for the Cypress M8 allows for
* a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -449,7 +461,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port)
return -ENOMEM;
}
- usb_reset_configuration(serial->dev);
+ /* Skip reset for FRWD device. It is a workaound:
+ device hangs if it receives SET_CONFIGURE in Configured
+ state. */
+ if (!is_frwd(serial->dev))
+ usb_reset_configuration(serial->dev);
priv->cmd_ctrl = 0;
priv->line_control = 0;
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 67cf608..b461311 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -24,6 +24,10 @@
#define VENDOR_ID_CYPRESS 0x04b4
#define PRODUCT_ID_CYPHIDCOM 0x5500
+/* FRWD Dongle - a GPS sports watch */
+#define VENDOR_ID_FRWD 0x6737
+#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001
+
/* Powercom UPS, chip CY7C63723 */
#define VENDOR_ID_POWERCOM 0x0d9f
#define PRODUCT_ID_UPS 0x0002
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 266ece7..e8e2837 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -931,8 +931,8 @@ static int ftdi_get_icount(struct tty_struct *tty,
static int ftdi_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
-static int ftdi_chars_in_buffer(struct tty_struct *tty);
-static int ftdi_get_modem_status(struct tty_struct *tty,
+static bool ftdi_tx_empty(struct usb_serial_port *port);
+static int ftdi_get_modem_status(struct usb_serial_port *port,
unsigned char status[2]);
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
@@ -968,7 +968,7 @@ static struct usb_serial_driver ftdi_sio_device = {
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
- .chars_in_buffer = ftdi_chars_in_buffer,
+ .tx_empty = ftdi_tx_empty,
};
static struct usb_serial_driver * const serial_drivers[] = {
@@ -2092,27 +2092,18 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
}
-static int ftdi_chars_in_buffer(struct tty_struct *tty)
+static bool ftdi_tx_empty(struct usb_serial_port *port)
{
- struct usb_serial_port *port = tty->driver_data;
- int chars;
unsigned char buf[2];
int ret;
- chars = usb_serial_generic_chars_in_buffer(tty);
- if (chars)
- goto out;
-
- /* Check if hardware buffer is empty. */
- ret = ftdi_get_modem_status(tty, buf);
+ ret = ftdi_get_modem_status(port, buf);
if (ret == 2) {
if (!(buf[1] & FTDI_RS_TEMT))
- chars = 1;
+ return false;
}
-out:
- dev_dbg(&port->dev, "%s - %d\n", __func__, chars);
- return chars;
+ return true;
}
/* old_termios contains the original termios settings and tty->termios contains
@@ -2304,10 +2295,9 @@ no_c_cflag_changes:
* Returns the number of status bytes retrieved (device dependant), or
* negative error code.
*/
-static int ftdi_get_modem_status(struct tty_struct *tty,
+static int ftdi_get_modem_status(struct usb_serial_port *port,
unsigned char status[2])
{
- struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned char *buf;
int len;
@@ -2372,7 +2362,7 @@ static int ftdi_tiocmget(struct tty_struct *tty)
unsigned char buf[2];
int ret;
- ret = ftdi_get_modem_status(tty, buf);
+ ret = ftdi_get_modem_status(port, buf);
if (ret < 0)
return ret;
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 4c5c23f..7f4342b 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -264,6 +264,37 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
}
EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer);
+void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ unsigned int bps;
+ unsigned long period;
+ unsigned long expire;
+
+ bps = tty_get_baud_rate(tty);
+ if (!bps)
+ bps = 9600; /* B0 */
+ /*
+ * Use a poll-period of roughly the time it takes to send one
+ * character or at least one jiffy.
+ */
+ period = max_t(unsigned long, (10 * HZ / bps), 1);
+ period = min_t(unsigned long, period, timeout);
+
+ dev_dbg(&port->dev, "%s - timeout = %u ms, period = %u ms\n",
+ __func__, jiffies_to_msecs(timeout),
+ jiffies_to_msecs(period));
+ expire = jiffies + timeout;
+ while (!port->serial->type->tx_empty(port)) {
+ schedule_timeout_interruptible(period);
+ if (signal_pending(current))
+ break;
+ if (time_after(jiffies, expire))
+ break;
+ }
+}
+EXPORT_SYMBOL_GPL(usb_serial_generic_wait_until_sent);
+
static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
int index, gfp_t mem_flags)
{
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 38f2489..f26decd 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2033,8 +2033,6 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
- int ret;
-
if (edge_port == NULL)
return 0;
@@ -2042,16 +2040,22 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
chars = kfifo_len(&edge_port->write_fifo);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- if (!chars) {
- ret = tx_active(edge_port);
- if (ret > 0)
- chars = ret;
- }
-
dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
return chars;
}
+static bool edge_tx_empty(struct usb_serial_port *port)
+{
+ struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+ int ret;
+
+ ret = tx_active(edge_port);
+ if (ret > 0)
+ return false;
+
+ return true;
+}
+
static void edge_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
@@ -2622,6 +2626,7 @@ static struct usb_serial_driver edgeport_1port_device = {
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
+ .tx_empty = edge_tx_empty,
.break_ctl = edge_break,
.read_int_callback = edge_interrupt_callback,
.read_bulk_callback = edge_bulk_in_callback,
@@ -2653,6 +2658,7 @@ static struct usb_serial_driver edgeport_2port_device = {
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
+ .tx_empty = edge_tx_empty,
.break_ctl = edge_break,
.read_int_callback = edge_interrupt_callback,
.read_bulk_callback = edge_bulk_in_callback,
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index ff77027..5687e26 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -289,7 +289,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
usb_bulk_msg(serial->dev,
usb_sndbulkpipe(serial->dev,
port->bulk_out_endpointAddress), buf,
- count, &actual, HZ * 1);
+ count, &actual, 1000);
if (status != IUU_OPERATION_OK)
dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);
@@ -309,7 +309,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
usb_bulk_msg(serial->dev,
usb_rcvbulkpipe(serial->dev,
port->bulk_in_endpointAddress), buf,
- count, &actual, HZ * 1);
+ count, &actual, 1000);
if (status != IUU_OPERATION_OK)
dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 1fd1935..34ed26e 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1594,7 +1594,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
d_details = s_priv->device_details;
device_port = port->number - port->serial->minor;
- outcont_urb = d_details->outcont_endpoints[port->number];
+ outcont_urb = d_details->outcont_endpoints[device_port];
this_urb = p_priv->outcont_urb;
dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe));
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index e0ebec3..0923689 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -40,7 +40,7 @@
#define DRIVER_DESC "Moschip USB Serial Driver"
/* default urb timeout */
-#define MOS_WDR_TIMEOUT (HZ * 5)
+#define MOS_WDR_TIMEOUT 5000
#define MOS_MAX_PORT 0x02
#define MOS_WRITE 0x0E
@@ -228,11 +228,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
__u8 requesttype = (__u8)0xc0;
__u16 index = get_reg_index(reg);
__u16 value = get_reg_value(reg, serial_portnum);
- int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
- index, data, 1, MOS_WDR_TIMEOUT);
- if (status < 0)
+ u8 *buf;
+ int status;
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+ index, buf, 1, MOS_WDR_TIMEOUT);
+ if (status == 1)
+ *data = *buf;
+ else if (status < 0)
dev_err(&usbdev->dev,
"mos7720: usb_control_msg() failed: %d", status);
+ kfree(buf);
+
return status;
}
@@ -1633,7 +1644,7 @@ static void change_port_settings(struct tty_struct *tty,
mos7720_port->shadowMCR |= (UART_MCR_XONANY);
/* To set hardware flow control to the specified *
* serial port, in SP1/2_CONTROL_REG */
- if (port->number)
+ if (port_number)
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
else
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
@@ -1992,7 +2003,7 @@ static int mos7720_startup(struct usb_serial *serial)
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
+ (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
/* start the interrupt urb */
ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
@@ -2035,7 +2046,7 @@ static void mos7720_release(struct usb_serial *serial)
/* wait for synchronous usb calls to return */
if (mos_parport->msg_pending)
wait_for_completion_timeout(&mos_parport->syncmsg_compl,
- MOS_WDR_TIMEOUT);
+ msecs_to_jiffies(MOS_WDR_TIMEOUT));
parport_remove_port(mos_parport->pp);
usb_set_serial_data(serial, NULL);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index b8051fa..2c14a31 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2255,13 +2255,21 @@ static int mos7840_ioctl(struct tty_struct *tty,
static int mos7810_check(struct usb_serial *serial)
{
int i, pass_count = 0;
+ u8 *buf;
__u16 data = 0, mcr_data = 0;
__u16 test_pattern = 0x55AA;
+ int res;
+
+ buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+ if (!buf)
+ return 0; /* failed to identify 7810 */
/* Store MCR setting */
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER,
- &mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ if (res == VENDOR_READ_LENGTH)
+ mcr_data = *buf;
for (i = 0; i < 16; i++) {
/* Send the 1-bit test pattern out to MCS7810 test pin */
@@ -2271,9 +2279,12 @@ static int mos7810_check(struct usb_serial *serial)
MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
/* Read the test pattern back */
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
- VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ res = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ,
+ MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+ VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ if (res == VENDOR_READ_LENGTH)
+ data = *buf;
/* If this is a MCS7810 device, both test patterns must match */
if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001)
@@ -2287,6 +2298,8 @@ static int mos7810_check(struct usb_serial *serial)
MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
0, MOS_WDR_TIMEOUT);
+ kfree(buf);
+
if (pass_count == 16)
return 1;
@@ -2296,11 +2309,17 @@ static int mos7810_check(struct usb_serial *serial)
static int mos7840_calc_num_ports(struct usb_serial *serial)
{
__u16 data = 0x00;
+ u8 *buf;
int mos7840_num_ports;
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
- VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+ if (buf) {
+ usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+ VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ data = *buf;
+ kfree(buf);
+ }
if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 ||
serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) {
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 87181be..9162db2 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -250,13 +250,7 @@ static void option_instat_callback(struct urb *urb);
#define ZTE_PRODUCT_MF622 0x0001
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
-#define ZTE_PRODUCT_CDMA_TECH 0xfffe
-#define ZTE_PRODUCT_AC8710 0xfff1
-#define ZTE_PRODUCT_AC2726 0xfff5
-#define ZTE_PRODUCT_AC8710T 0xffff
#define ZTE_PRODUCT_MC2718 0xffe8
-#define ZTE_PRODUCT_AD3812 0xffeb
-#define ZTE_PRODUCT_MC2716 0xffed
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
@@ -495,18 +489,10 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = {
.reserved = BIT(4),
};
-static const struct option_blacklist_info zte_ad3812_z_blacklist = {
- .sendsetup = BIT(0) | BIT(1) | BIT(2),
-};
-
static const struct option_blacklist_info zte_mc2718_z_blacklist = {
.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
};
-static const struct option_blacklist_info zte_mc2716_z_blacklist = {
- .sendsetup = BIT(1) | BIT(2) | BIT(3),
-};
-
static const struct option_blacklist_info huawei_cdc12_blacklist = {
.reserved = BIT(1) | BIT(2),
};
@@ -593,6 +579,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */
+ .driver_info = (kernel_ulong_t) &net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
@@ -797,7 +785,6 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
- { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
@@ -1199,16 +1186,9 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+ /* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
- .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
- .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 59b32b7..bd794b4 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -118,6 +118,7 @@ static const struct usb_device_id id_table[] = {
{USB_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */
{USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */
{USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */
+ {USB_DEVICE(0x0AF0, 0x8120)}, /* Option GTM681W */
/* non Gobi Qualcomm serial devices */
{USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)}, /* Sierra Wireless MC7700 Device Management */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 5d9b178..42de53c 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -379,6 +379,22 @@ static int serial_chars_in_buffer(struct tty_struct *tty)
return count;
}
+static void serial_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial *serial = port->serial;
+
+ dev_dbg(tty->dev, "%s\n", __func__);
+
+ if (!port->serial->type->wait_until_sent)
+ return;
+
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ port->serial->type->wait_until_sent(tty, timeout);
+ mutex_unlock(&serial->disc_mutex);
+}
+
static void serial_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
@@ -1204,6 +1220,7 @@ static const struct tty_operations serial_ops = {
.unthrottle = serial_unthrottle,
.break_ctl = serial_break,
.chars_in_buffer = serial_chars_in_buffer,
+ .wait_until_sent = serial_wait_until_sent,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
.get_icount = serial_get_icount,
@@ -1329,6 +1346,8 @@ static void fixup_generic(struct usb_serial_driver *device)
set_to_generic_if_null(device, close);
set_to_generic_if_null(device, write_room);
set_to_generic_if_null(device, chars_in_buffer);
+ if (device->tx_empty)
+ set_to_generic_if_null(device, wait_until_sent);
set_to_generic_if_null(device, read_bulk_callback);
set_to_generic_if_null(device, write_bulk_callback);
set_to_generic_if_null(device, disconnect);
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 1129aa7..c24ee17 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -566,10 +566,19 @@ static int treo_attach(struct usb_serial *serial)
*/
#define COPY_PORT(dest, src) \
do { \
+ int i; \
+ \
+ for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \
+ dest->read_urbs[i] = src->read_urbs[i]; \
+ dest->read_urbs[i]->context = dest; \
+ dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \
+ } \
dest->read_urb = src->read_urb; \
dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\
dest->bulk_in_buffer = src->bulk_in_buffer; \
+ dest->bulk_in_size = src->bulk_in_size; \
dest->interrupt_in_urb = src->interrupt_in_urb; \
+ dest->interrupt_in_urb->context = dest; \
dest->interrupt_in_endpointAddress = \
src->interrupt_in_endpointAddress;\
dest->interrupt_in_buffer = src->interrupt_in_buffer; \
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index b9fca35..347caad 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -649,7 +649,7 @@ static void firm_setup_port(struct tty_struct *tty)
struct whiteheat_port_settings port_settings;
unsigned int cflag = tty->termios.c_cflag;
- port_settings.port = port->number + 1;
+ port_settings.port = port->number - port->serial->minor + 1;
/* get the byte size */
switch (cflag & CSIZE) {
diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
index 39ee737..fca4c75 100644
--- a/drivers/usb/serial/zte_ev.c
+++ b/drivers/usb/serial/zte_ev.c
@@ -41,9 +41,6 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
int len;
unsigned char *buf;
- if (port->number != 0)
- return -ENODEV;
-
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -53,7 +50,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0001, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st cmd and recieve data */
@@ -65,7 +62,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 3 cmd */
@@ -84,7 +81,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4 cmd */
@@ -95,7 +92,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 5 cmd */
@@ -107,7 +104,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 6 cmd */
@@ -126,7 +123,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
kfree(buf);
@@ -166,9 +163,6 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
int len;
unsigned char *buf;
- if (port->number != 0)
- return;
-
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return;
@@ -178,7 +172,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0002, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */
@@ -186,7 +180,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 3st cmd and recieve data */
@@ -198,7 +192,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4 cmd */
@@ -217,7 +211,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 5 cmd */
@@ -228,7 +222,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 6 cmd */
@@ -240,7 +234,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 7 cmd */
@@ -259,7 +253,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 8 cmd */
@@ -270,7 +264,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
kfree(buf);
@@ -279,11 +273,29 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
}
static const struct usb_device_id id_table[] = {
- { USB_DEVICE(0x19d2, 0xffff) }, /* AC8700 */
- { USB_DEVICE(0x19d2, 0xfffe) },
- { USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */
+ /* AC8710, AC8710T */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) },
+ /* AC8700 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) },
+ /* MG880 */
+ { USB_DEVICE(0x19d2, 0xfffd) },
+ { USB_DEVICE(0x19d2, 0xfffc) },
+ { USB_DEVICE(0x19d2, 0xfffb) },
+ /* AC2726, AC8710_V3 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfff1, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(0x19d2, 0xfff6) },
+ { USB_DEVICE(0x19d2, 0xfff7) },
+ { USB_DEVICE(0x19d2, 0xfff8) },
+ { USB_DEVICE(0x19d2, 0xfff9) },
+ { USB_DEVICE(0x19d2, 0xffee) },
+ /* AC2716, MC2716 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) },
+ /* AD3812 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(0x19d2, 0xffec) },
{ USB_DEVICE(0x05C6, 0x3197) },
{ USB_DEVICE(0x05C6, 0x6000) },
+ { USB_DEVICE(0x05C6, 0x9008) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 21b3a29..6c4b480 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3332,8 +3332,8 @@ build_unc_path_to_root(const struct smb_vol *vol,
pos = full_path + unc_len;
if (pplen) {
- *pos++ = CIFS_DIR_SEP(cifs_sb);
- strncpy(pos, vol->prepath, pplen);
+ *pos = CIFS_DIR_SEP(cifs_sb);
+ strncpy(pos + 1, vol->prepath, pplen);
pos += pplen;
}
diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c
index 63b1f54..3d7fb59 100644
--- a/fs/ecryptfs/file.c
+++ b/fs/ecryptfs/file.c
@@ -294,6 +294,12 @@ static int ecryptfs_release(struct inode *inode, struct file *file)
static int
ecryptfs_fsync(struct file *file, loff_t start, loff_t end, int datasync)
{
+ int rc;
+
+ rc = filemap_write_and_wait(file->f_mapping);
+ if (rc)
+ return rc;
+
return vfs_fsync(ecryptfs_file_to_lower(file), datasync);
}
diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index 9f9dbec..5d325c5 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -109,10 +109,14 @@ static void hpfs_write_failed(struct address_space *mapping, loff_t to)
{
struct inode *inode = mapping->host;
+ hpfs_lock(inode->i_sb);
+
if (to > inode->i_size) {
truncate_pagecache(inode, to, inode->i_size);
hpfs_truncate(inode);
}
+
+ hpfs_unlock(inode->i_sb);
}
static int hpfs_write_begin(struct file *file, struct address_space *mapping,
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 1819b59..73afb19 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -267,6 +267,8 @@ struct usb_serial_driver {
struct usb_serial_port *port, struct ktermios *old);
void (*break_ctl)(struct tty_struct *tty, int break_state);
int (*chars_in_buffer)(struct tty_struct *tty);
+ void (*wait_until_sent)(struct tty_struct *tty, long timeout);
+ bool (*tx_empty)(struct usb_serial_port *port);
void (*throttle)(struct tty_struct *tty);
void (*unthrottle)(struct tty_struct *tty);
int (*tiocmget)(struct tty_struct *tty);
@@ -325,6 +327,8 @@ extern void usb_serial_generic_close(struct usb_serial_port *port);
extern int usb_serial_generic_resume(struct usb_serial *serial);
extern int usb_serial_generic_write_room(struct tty_struct *tty);
extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
+extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty,
+ long timeout);
extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
extern void usb_serial_generic_throttle(struct tty_struct *tty);
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 14d7758..d93dcb1 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -195,8 +195,12 @@ void local_bh_enable_ip(unsigned long ip)
EXPORT_SYMBOL(local_bh_enable_ip);
/*
- * We restart softirq processing for at most 2 ms,
- * and if need_resched() is not set.
+ * We restart softirq processing for at most MAX_SOFTIRQ_RESTART times,
+ * but break the loop if need_resched() is set or after 2 ms.
+ * The MAX_SOFTIRQ_TIME provides a nice upper bound in most cases, but in
+ * certain cases, such as stop_machine(), jiffies may cease to
+ * increment and so we need the MAX_SOFTIRQ_RESTART limit as
+ * well to make sure we eventually return from this method.
*
* These limits have been established via experimentation.
* The two things to balance is latency against fairness -
@@ -204,6 +208,7 @@ EXPORT_SYMBOL(local_bh_enable_ip);
* should not be able to lock up the box.
*/
#define MAX_SOFTIRQ_TIME msecs_to_jiffies(2)
+#define MAX_SOFTIRQ_RESTART 10
asmlinkage void __do_softirq(void)
{
@@ -212,6 +217,7 @@ asmlinkage void __do_softirq(void)
unsigned long end = jiffies + MAX_SOFTIRQ_TIME;
int cpu;
unsigned long old_flags = current->flags;
+ int max_restart = MAX_SOFTIRQ_RESTART;
/*
* Mask out PF_MEMALLOC s current task context is borrowed for the
@@ -265,7 +271,8 @@ restart:
pending = local_softirq_pending();
if (pending) {
- if (time_before(jiffies, end) && !need_resched())
+ if (time_before(jiffies, end) && !need_resched() &&
+ --max_restart)
goto restart;
wakeup_softirqd();
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 9a0bc98..183df62 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -826,6 +826,14 @@ static int timekeeping_suspend(void)
read_persistent_clock(&timekeeping_suspend_time);
+ /*
+ * On some systems the persistent_clock can not be detected at
+ * timekeeping_init by its return value, so if we see a valid
+ * value returned, update the persistent_clock_exists flag.
+ */
+ if (timekeeping_suspend_time.tv_sec || timekeeping_suspend_time.tv_nsec)
+ persistent_clock_exist = true;
+
write_seqlock_irqsave(&tk->lock, flags);
timekeeping_forward_now(tk);
timekeeping_suspended = 1;
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index d74500b..222b6de 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -772,6 +772,8 @@ static void set_pin_eapd(struct hda_codec *codec, hda_nid_t pin, bool enable)
return;
if (codec->inv_eapd)
enable = !enable;
+ if (spec->keep_eapd_on && !enable)
+ return;
snd_hda_codec_update_cache(codec, pin, 0,
AC_VERB_SET_EAPD_BTLENABLE,
enable ? 0x02 : 0x00);
@@ -3671,6 +3673,36 @@ static void update_automute_all(struct hda_codec *codec)
snd_hda_gen_mic_autoswitch(codec, NULL);
}
+/* call appropriate hooks */
+static void call_hp_automute(struct hda_codec *codec, struct hda_jack_tbl *jack)
+{
+ struct hda_gen_spec *spec = codec->spec;
+ if (spec->hp_automute_hook)
+ spec->hp_automute_hook(codec, jack);
+ else
+ snd_hda_gen_hp_automute(codec, jack);
+}
+
+static void call_line_automute(struct hda_codec *codec,
+ struct hda_jack_tbl *jack)
+{
+ struct hda_gen_spec *spec = codec->spec;
+ if (spec->line_automute_hook)
+ spec->line_automute_hook(codec, jack);
+ else
+ snd_hda_gen_line_automute(codec, jack);
+}
+
+static void call_mic_autoswitch(struct hda_codec *codec,
+ struct hda_jack_tbl *jack)
+{
+ struct hda_gen_spec *spec = codec->spec;
+ if (spec->mic_autoswitch_hook)
+ spec->mic_autoswitch_hook(codec, jack);
+ else
+ snd_hda_gen_mic_autoswitch(codec, jack);
+}
+
/*
* Auto-Mute mode mixer enum support
*/
@@ -3805,9 +3837,7 @@ static int check_auto_mute_availability(struct hda_codec *codec)
snd_printdd("hda-codec: Enable HP auto-muting on NID 0x%x\n",
nid);
snd_hda_jack_detect_enable_callback(codec, nid, HDA_GEN_HP_EVENT,
- spec->hp_automute_hook ?
- spec->hp_automute_hook :
- snd_hda_gen_hp_automute);
+ call_hp_automute);
spec->detect_hp = 1;
}
@@ -3820,9 +3850,7 @@ static int check_auto_mute_availability(struct hda_codec *codec)
snd_printdd("hda-codec: Enable Line-Out auto-muting on NID 0x%x\n", nid);
snd_hda_jack_detect_enable_callback(codec, nid,
HDA_GEN_FRONT_EVENT,
- spec->line_automute_hook ?
- spec->line_automute_hook :
- snd_hda_gen_line_automute);
+ call_line_automute);
spec->detect_lo = 1;
}
spec->automute_lo_possible = spec->detect_hp;
@@ -3864,9 +3892,7 @@ static bool auto_mic_check_imux(struct hda_codec *codec)
snd_hda_jack_detect_enable_callback(codec,
spec->am_entry[i].pin,
HDA_GEN_MIC_EVENT,
- spec->mic_autoswitch_hook ?
- spec->mic_autoswitch_hook :
- snd_hda_gen_mic_autoswitch);
+ call_mic_autoswitch);
return true;
}
diff --git a/sound/pci/hda/hda_generic.h b/sound/pci/hda/hda_generic.h
index 009b57b..aee3238 100644
--- a/sound/pci/hda/hda_generic.h
+++ b/sound/pci/hda/hda_generic.h
@@ -205,6 +205,7 @@ struct hda_gen_spec {
unsigned int multi_cap_vol:1; /* allow multiple capture xxx volumes */
unsigned int inv_dmic_split:1; /* inverted dmic w/a for conexant */
unsigned int own_eapd_ctl:1; /* set EAPD by own function */
+ unsigned int keep_eapd_on:1; /* don't turn off EAPD automatically */
unsigned int vmaster_mute_enum:1; /* add vmaster mute mode enum */
unsigned int indep_hp:1; /* independent HP supported */
unsigned int prefer_hp_amp:1; /* enable HP amp for speaker if any */
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index c35338a..9a9a032 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -136,6 +136,7 @@ static struct via_spec *via_new_spec(struct hda_codec *codec)
spec->codec_type = VT1708S;
spec->no_pin_power_ctl = 1;
spec->gen.indep_hp = 1;
+ spec->gen.keep_eapd_on = 1;
spec->gen.pcm_playback_hook = via_playback_pcm_hook;
return spec;
}
@@ -231,9 +232,14 @@ static void vt1708_update_hp_work(struct hda_codec *codec)
static void set_widgets_power_state(struct hda_codec *codec)
{
+#if 0 /* FIXME: the assumed connections don't match always with the
+ * actual routes by the generic parser, so better to disable
+ * the control for safety.
+ */
struct via_spec *spec = codec->spec;
if (spec->set_widgets_power_state)
spec->set_widgets_power_state(codec);
+#endif
}
static void update_power_state(struct hda_codec *codec, hda_nid_t nid,
@@ -478,7 +484,9 @@ static int via_suspend(struct hda_codec *codec)
/* Fix pop noise on headphones */
int i;
for (i = 0; i < spec->gen.autocfg.hp_outs; i++)
- snd_hda_set_pin_ctl(codec, spec->gen.autocfg.hp_pins[i], 0);
+ snd_hda_codec_write(codec, spec->gen.autocfg.hp_pins[i],
+ 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ 0x00);
}
return 0;
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index ca4739c..e5c7f9f 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -886,6 +886,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval,
case USB_ID(0x046d, 0x0808):
case USB_ID(0x046d, 0x0809):
case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
+ case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */
case USB_ID(0x046d, 0x0991):
/* Most audio usb devices lie about volume resolution.
* Most Logitech webcams have res = 384.
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index c39f898..1c719d8 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -215,7 +215,13 @@
.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
},
{
- USB_DEVICE(0x046d, 0x0990),
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .idVendor = 0x046d,
+ .idProduct = 0x0990,
+ .bInterfaceClass = USB_CLASS_AUDIO,
+ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.vendor_name = "Logitech, Inc.",
.product_name = "QuickCam Pro 9000",
@@ -1714,7 +1720,11 @@ YAMAHA_DEVICE(0x7010, "UB99"),
USB_DEVICE_VENDOR_SPEC(0x0582, 0x0108),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.ifnum = 0,
- .type = QUIRK_MIDI_STANDARD_INTERFACE
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = & (const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0007,
+ .in_cables = 0x0007
+ }
}
},
{
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists