[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at /c/kernel-tests/src/tip/mm/percpu.c:292 pcpu_mem_zalloc+0x2f/0x80() [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0-rc4-00064-gf284b773 #57 [ 0.000000] 0000000000000009 ffffffff82133d58 ffffffff81c259e5 ffffffff82133d98 [ 0.000000] ffffffff810818c6 ffffffff82133da8 0000000000000000 0000000000000004 [ 0.000000] 0000000000000082 0000000000000004 0000000000000004 ffffffff82133da8 [ 0.000000] Call Trace: [ 0.000000] [] dump_stack+0x19/0x1b [ 0.000000] [] warn_slowpath_common+0x66/0x90 [ 0.000000] [] warn_slowpath_null+0x15/0x20 [ 0.000000] [] pcpu_mem_zalloc+0x2f/0x80 [ 0.000000] [] pcpu_alloc+0x28d/0xb30 [ 0.000000] [] ? lock_acquired+0x2ae/0x2f0 [ 0.000000] [] ? trace_hardirqs_off_caller+0x38/0xc0 [ 0.000000] [] ? cgroup_pidlist_release+0x50/0x50 [ 0.000000] [] __alloc_percpu+0xb/0x10 [ 0.000000] [] percpu_ref_init+0x2b/0x60 [ 0.000000] [] init_cgroup_css.isra.24+0x30/0xc0 [ 0.000000] [] cgroup_init_subsys+0x79/0xe9 [ 0.000000] [] cgroup_init_early+0x1af/0x1bf [ 0.000000] [] start_kernel+0x1e/0x4a8 [ 0.000000] [] ? memblock_reserve+0x46/0x4b [ 0.000000] [] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [] x86_64_start_kernel+0xec/0xfb [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.000000] PERCPU: allocation failed, size=4 align=4, failed to allocate new chunk [ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 3.10.0-rc4-00064-gf284b773 #57 [ 0.000000] 0000000000000004 ffffffff82133dc8 ffffffff81c259e5 ffffffff82133e78 [ 0.000000] ffffffff81140ee4 0000000000000046 0000000000000004 0000000000000000 [ 0.000000] 0000000000000046 0000000000000004 ffffffff810de45e ffffffff82133e48 [ 0.000000] Call Trace: [ 0.000000] [] dump_stack+0x19/0x1b [ 0.000000] [] pcpu_alloc+0x9f4/0xb30 [ 0.000000] [] ? lock_acquired+0x2ae/0x2f0 [ 0.000000] [] ? trace_hardirqs_off_caller+0x38/0xc0 [ 0.000000] [] ? cgroup_pidlist_release+0x50/0x50 [ 0.000000] [] __alloc_percpu+0xb/0x10 [ 0.000000] [] percpu_ref_init+0x2b/0x60 [ 0.000000] [] init_cgroup_css.isra.24+0x30/0xc0 [ 0.000000] [] cgroup_init_subsys+0x79/0xe9 [ 0.000000] [] cgroup_init_early+0x1af/0x1bf [ 0.000000] [] start_kernel+0x1e/0x4a8 [ 0.000000] [] ? memblock_reserve+0x46/0x4b [ 0.000000] [] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [] x86_64_start_kernel+0xec/0xfb [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] PERCPU: allocation failed, size=4 align=4, failed to allocate new chunk [ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 3.10.0-rc4-00064-gf284b773 #57 [ 0.000000] 0000000000000004 ffffffff82133dc8 ffffffff81c259e5 ffffffff82133e78 [ 0.000000] ffffffff81140ee4 0000000000000046 0000000000000004 0000000000000000 [ 0.000000] 0000000000000046 0000000000000004 ffffffff810de45e ffffffff82133e48 [ 0.000000] Call Trace: [ 0.000000] [] dump_stack+0x19/0x1b [ 0.000000] [] pcpu_alloc+0x9f4/0xb30 [ 0.000000] [] ? lock_acquired+0x2ae/0x2f0 [ 0.000000] [] ? trace_hardirqs_off_caller+0x38/0xc0 [ 0.000000] [] ? cgroup_pidlist_release+0x50/0x50 [ 0.000000] [] __alloc_percpu+0xb/0x10 [ 0.000000] [] percpu_ref_init+0x2b/0x60 [ 0.000000] [] init_cgroup_css.isra.24+0x30/0xc0 [ 0.000000] [] cgroup_init_subsys+0x79/0xe9 [ 0.000000] [] cgroup_init_early+0x1af/0x1bf [ 0.000000] [] start_kernel+0x1e/0x4a8 [ 0.000000] [] ? memblock_reserve+0x46/0x4b [ 0.000000] [] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [] x86_64_start_kernel+0xec/0xfb [ 0.000000] Linux version 3.10.0-rc4-00064-gf284b773 (kbuild@athens) (gcc version 4.7.2 (Debian 4.7.2-4) ) #57 SMP PREEMPT Thu Jun 13 04:58:37 CST 2013 [ 0.000000] Command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-a02-0612/cgroup:review-css-percpu-ref/.vmlinuz-f284b77333b1320491f138b76f11006bbc962569-20130613045909-1-lkp-nex04 branch=cgroup/review-css-percpu-ref BOOT_IMAGE=/kernel/x86_64-randconfig-a02-0612/f284b77333b1320491f138b76f11006bbc962569/vmlinuz-3.10.0-rc4-00064-gf284b773 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdae0-0x000fdaef] mapped at [ffff8800000fdae0] [ 0.000000] mpc: fdaf0-fdbec [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x030a3000, 0x030a3fff] PGTABLE [ 0.000000] BRK [0x030a4000, 0x030a4fff] PGTABLE [ 0.000000] BRK [0x030a5000, 0x030a5fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff] [ 0.000000] [mem 0x0e600000-0x0e7fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff] [ 0.000000] [mem 0x0c000000-0x0e5fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x0bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff] [ 0.000000] [mem 0x0e800000-0x0fdfffff] page 2M [ 0.000000] [mem 0x0fe00000-0x0fffdfff] page 4k [ 0.000000] BRK [0x030a6000, 0x030a6fff] PGTABLE [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 122632(93%) [ 0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff] [ 0.000000] ACPI: RSDP 00000000000fd950 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000000fffe550 00038 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000000fffe590 01121 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 000000000fffff40 00040 [ 0.000000] ACPI: SSDT 000000000ffffe40 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 000000000ffffd50 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000000ffffd10 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 000000000ffff6c0 00644 (v01 BXPC BXSSDTPC 00000001 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5bb000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000000fffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x0fffdfff] [ 0.000000] NODE_DATA [mem 0x0e0af000-0x0e0d5fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:e06f001, boot clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65436 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 960 pages used for memmap [ 0.000000] DMA32 zone: 61438 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5bb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 2, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5ba000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 473 pages/cpu @ffff88000da00000 s1913600 r0 d23808 u2097152 [ 0.000000] pcpu-alloc: s1913600 r0 d23808 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] kvm-clock: cpu 0, msr 0:e06f001, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr da0ce00 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 64391 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-a02-0612/cgroup:review-css-percpu-ref/.vmlinuz-f284b77333b1320491f138b76f11006bbc962569-20130613045909-1-lkp-nex04 branch=cgroup/review-css-percpu-ref BOOT_IMAGE=/kernel/x86_64-randconfig-a02-0612/f284b77333b1320491f138b76f11006bbc962569/vmlinuz-3.10.0-rc4-00064-gf284b773 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 187352k/262136k available (12517k kernel code, 392k absent, 74392k reserved, 7367k data, 3020k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] [ 0.000000] NR_IRQS:262400 nr_irqs:56 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6367 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2261.066 MHz processor [ 0.003333] Calibrating delay loop (skipped) preset value.. 4523.55 BogoMIPS (lpj=7536886) [ 0.006690] pid_max: default: 32768 minimum: 301 [ 0.008559] Security Framework initialized [ 0.010050] AppArmor: AppArmor initialized [ 0.013441] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.017182] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.020259] Mount-cache hash table entries: 256 [ 0.024936] Initializing cgroup subsys memory [ 0.026782] Initializing cgroup subsys devices [ 0.028508] Initializing cgroup subsys freezer [ 0.030045] Initializing cgroup subsys blkio [ 0.036679] Initializing cgroup subsys perf_event [ 0.038336] Initializing cgroup subsys net_prio [ 0.040154] mce: CPU supports 10 MCE banks [ 0.041705] numa_add_cpu cpu 0 node 0: mask now 0 [ 0.043354] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.043354] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.043354] tlb_flushall_shift: 6 [ 0.046900] Freeing SMP alternatives: 32k freed [ 0.053149] ACPI: Core revision 20130328 [ 0.058747] ACPI: All ACPI Tables successfully acquired [ 0.067397] Getting VERSION: 50014 [ 0.070052] Getting VERSION: 50014 [ 0.073364] Getting ID: 0 [ 0.076699] Getting ID: ff000000 [ 0.078353] Getting LVT0: 8700 [ 0.080027] Getting LVT1: 8400 [ 0.081651] enabled ExtINT on CPU#0 [ 0.084992] ENABLING IO-APIC IRQs [ 0.086696] init IO_APIC IRQs [ 0.088593] apic 2 pin 0 not connected [ 0.090051] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.093394] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.096722] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.100061] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.103387] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.106759] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.110057] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.113390] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.120027] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.123405] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.126724] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.130062] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.133391] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.136666] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.136722] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.139999] apic 2 pin 16 not connected [ 0.140021] apic 2 pin 17 not connected [ 0.143369] apic 2 pin 18 not connected [ 0.146666] apic 2 pin 19 not connected [ 0.146688] apic 2 pin 20 not connected [ 0.150021] apic 2 pin 21 not connected [ 0.153354] apic 2 pin 22 not connected [ 0.156666] apic 2 pin 23 not connected [ 0.157949] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.159999] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.159999] Using local APIC timer interrupts. [ 0.159999] calibrating APIC timer ... [ 0.159999] ... lapic delta = 7916497 [ 0.159999] ... PM-Timer delta = 453486 [ 0.159999] APIC calibration not consistent with PM-Timer: 126ms instead of 100ms [ 0.159999] APIC delta adjusted to PM-Timer: 6248796 (7916497) [ 0.159999] TSC delta adjusted to PM-Timer: 226098763 (286440783) [ 0.159999] ..... delta 6248796 [ 0.159999] ..... mult: 268383771 [ 0.159999] ..... calibration result: 3332691 [ 0.159999] ..... CPU clock speed is 2261.0712 MHz. [ 0.159999] ..... host bus clock speed is 999.3024 MHz. [ 0.163667] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.197575] SMP alternatives: lockdep: fixing up alternatives [ 0.200052] smpboot: Booting Node 0, Processors #1 OK [ 0.003333] kvm-clock: cpu 1, msr 0:e06f041, secondary cpu clock [ 0.003333] masked ExtINT on CPU#1 [ 0.003333] numa_add_cpu cpu 1 node 0: mask now 0-1 [ 0.234243] KVM setup async PF for cpu 1 [ 0.234434] Brought up 2 CPUs [ 0.234438] smpboot: Total of 2 processors activated (9047.10 BogoMIPS) [ 0.236666] kvm-stealtime: cpu 1, msr dc0ce00 [ 0.247123] CPU0 attaching sched-domain: [ 0.248616] domain 0: span 0-1 level CPU [ 0.251537] groups: 0 (cpu_power = 960) 1 (cpu_power = 1014) [ 0.256694] CPU1 attaching sched-domain: [ 0.260065] domain 0: span 0-1 level CPU [ 0.263342] groups: 1 (cpu_power = 1014) 0 (cpu_power = 960) [ 0.278959] EVM: security.ima [ 0.280021] EVM: security.capability [ 0.284624] regulator-dummy: no parameters [ 0.287199] NET: Registered protocol family 16 [ 0.294584] ACPI: bus type PCI registered [ 0.296749] PCI: Using configuration type 1 for base access [ 0.333840] bio: create slab at 0 [ 0.340875] ACPI: Added _OSI(Module Device) [ 0.343358] ACPI: Added _OSI(Processor Device) [ 0.345467] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.346690] ACPI: Added _OSI(Processor Aggregator Device) [ 0.354489] ACPI: EC: Look up EC in DSDT [ 0.365619] ACPI: Interpreter enabled [ 0.366697] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.371216] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.376166] ACPI: (supports S0 S3 S5) [ 0.376687] ACPI: Using IOAPIC for interrupt routing [ 0.380097] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.405077] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.406803] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.410022] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.413355] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.416691] acpi PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) [ 0.420023] PCI: root bus 00: using default resources [ 0.423437] PCI host bridge to bus 0000:00 [ 0.425357] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.426688] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.430024] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff] [ 0.433466] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.437475] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.441099] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.447616] pci 0000:00:01.1: reg 20: [io 0xc060-0xc06f] [ 0.451932] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.454088] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.460093] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.467150] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.476739] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 0.483415] pci 0000:00:02.0: reg 14: [mem 0xfebe0000-0xfebe0fff] [ 0.523405] pci 0000:00:02.0: reg 30: [mem 0xfebc0000-0xfebcffff pref] [ 0.533800] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 [ 0.543361] pci 0000:00:03.0: reg 10: [io 0xc040-0xc05f] [ 0.551664] pci 0000:00:03.0: reg 14: [mem 0xfebe1000-0xfebe1fff] [ 0.571687] pci 0000:00:03.0: reg 30: [mem 0xfebd0000-0xfebdffff pref] [ 0.578476] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000 [ 0.589546] pci 0000:00:04.0: reg 10: [mem 0xfeb80000-0xfeb9ffff] [ 0.598245] pci 0000:00:04.0: reg 14: [io 0xc000-0xc03f] [ 0.616690] pci 0000:00:04.0: reg 30: [mem 0xfeba0000-0xfebbffff pref] [ 0.624937] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000 [ 0.631809] pci 0000:00:05.0: reg 10: [mem 0xfebe2000-0xfebe200f] [ 0.650263] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.666198] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.675464] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.683810] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.693406] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.700859] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0 [ 0.709514] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.713389] acpi root: \_SB_.PCI0 notify handler is installed [ 0.720273] Found 1 acpi root devices [ 0.731022] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.733360] vgaarb: loaded [ 0.736686] vgaarb: bridge control possible 0000:00:02.0 [ 0.740538] tps65010: version 2 May 2005 [ 0.770115] tps65010: no chip? [ 0.772731] SCSI subsystem initialized [ 0.773370] ACPI: bus type ATA registered [ 0.777066] libata version 3.00 loaded. [ 0.779450] pps_core: LinuxPPS API ver. 1 registered [ 0.780019] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.786738] PTP clock support registered [ 0.793977] PCI: Using ACPI for IRQ routing [ 0.796696] PCI: pci_cache_line_size set to 64 bytes [ 0.800340] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.803369] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 0.807870] NET: Registered protocol family 23 [ 0.813475] NET: Registered protocol family 8 [ 0.815525] NET: Registered protocol family 20 [ 0.816862] nfc: nfc_init: NFC Core ver 0.1 [ 0.820142] NET: Registered protocol family 39 [ 0.824113] Switching to clocksource kvm-clock [ 0.827468] FS-Cache: Loaded [ 0.829612] AppArmor: AppArmor Filesystem Enabled [ 0.832029] pnp: PnP ACPI init [ 0.833712] ACPI: bus type PNP registered [ 0.850883] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 0.854772] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.857787] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 0.861690] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.877731] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 0.881596] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.884621] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 0.888412] pnp 00:03: [dma 2] [ 0.901984] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.909355] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 0.917509] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.923430] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 0.926958] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.949396] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.952785] pnp: PnP ACPI: found 7 devices [ 0.954789] ACPI: bus type PNP unregistered [ 0.967178] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.969645] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff] [ 0.972626] NET: Registered protocol family 1 [ 0.974886] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.977560] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.980204] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.983000] pci 0000:00:02.0: Boot video device [ 0.985216] PCI: CLS 0 bytes, default 64 [ 1.001161] Trying to unpack rootfs image as initramfs... [ 5.046068] Freeing initrd memory: 23656k freed [ 5.116825] Machine check injector initialized [ 5.120000] Scanning for low memory corruption every 60 seconds [ 5.124939] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64. [ 5.130140] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64. [ 5.157521] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way. [ 5.202146] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 5.204822] PCLMULQDQ-NI instructions are not detected. [ 5.207139] sha512_ssse3: Neither AVX nor SSSE3 is available/usable. [ 5.209708] AVX or AES-NI instructions are not detected. [ 5.211964] AVX instructions are not detected. [ 5.214015] AVX instructions are not detected. [ 5.215956] AVX2 instructions are not detected. [ 5.243933] audit: initializing netlink socket (disabled) [ 5.246558] type=2000 audit(1371066719.243:1): initialized [ 5.296636] VFS: Disk quotas dquot_6.5.2 [ 5.298654] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.315238] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.320966] NTFS driver 2.1.30 [Flags: R/W]. [ 5.323209] EFS: 1.0a - http://aeschi.ch.eu.org/efs/ [ 5.325531] jffs2: version 2.2. [ 5.328527] ROMFS MTD (C) 2007 Red Hat, Inc. [ 5.330750] QNX4 filesystem 0.2.3 registered. [ 5.332748] QNX6 filesystem 1.0.0 registered. [ 5.340573] fuse init (API version 7.22) [ 5.342650] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, debug enabled [ 5.373904] BeFS version: 0.9.3 [ 5.375590] OCFS2 1.5.0 [ 5.377570] ocfs2: Registered cluster interface o2cb [ 5.379708] OCFS2 DLMFS 1.5.0 [ 5.381714] OCFS2 User DLM kernel interface loaded [ 5.384066] OCFS2 Node Manager 1.5.0 [ 5.387062] OCFS2 DLM 1.5.0 [ 5.402479] GFS2 installed [ 5.467947] alg: No test for crc32 (crc32-table) [ 5.470454] alg: No test for stdrng (krng) [ 5.510812] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 5.513486] NET: Registered protocol family 38 [ 5.515628] Key type asymmetric registered [ 5.517759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 5.522531] io scheduler noop registered (default) [ 5.524794] io scheduler deadline registered [ 5.526833] test_string_helpers: Running tests... [ 5.529589] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.532170] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.544147] cr_bllcd: INTEL CARILLO RANCH LPC not found. [ 5.546557] cr_bllcd: Carillo Ranch Backlight Driver Initialized. [ 5.549793] nvidiafb_setup START [ 5.551674] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 5.578186] vmlfb: initializing [ 5.579955] no IO addresses supplied [ 5.582050] hgafb: HGA card not detected. [ 5.584025] hgafb: probe of hgafb.0 failed with error -22 [ 5.587719] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xfc000000 [ 5.591703] CL Picasso4: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer [ 5.608324] cirrusfb 0000:00:02.0: could not register fb device; err = -38! [ 5.611373] cirrusfb: probe of 0000:00:02.0 failed with error -38 [ 5.624587] uvesafb: failed to execute /sbin/v86d [ 5.626794] uvesafb: make sure that the v86d helper is installed and executable [ 5.630285] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 5.633091] uvesafb: vbe_init() failed with -22 [ 5.644341] uvesafb: probe of uvesafb.0 failed with error -22 [ 5.647450] ipmi message handler version 39.2 [ 5.649529] ipmi device interface [ 5.651411] IPMI System Interface driver. [ 5.653519] ipmi_si: Adding default-specified kcs state machine [ 5.667211] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 5.671644] ipmi_si: Interface detection failed [ 5.683558] ipmi_si: Adding default-specified smic state machine [ 5.686341] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 5.703622] ipmi_si: Interface detection failed [ 5.713516] ipmi_si: Adding default-specified bt state machine [ 5.716362] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 5.720806] ipmi_si: Interface detection failed [ 5.730471] ipmi_si: Unable to find any System Interface(s) [ 5.733191] IPMI Watchdog: driver initialized [ 5.735932] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 5.739516] ACPI: Power Button [PWRF] [ 5.764593] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 5.767282] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:3) [ 5.784513] virtio-pci 0000:00:03.0: setting latency timer to 64 [ 5.817444] HDLC line discipline maxframe=4096 [ 5.819559] N_HDLC line discipline registered. [ 5.821841] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 5.824425] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.850924] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.855928] MOXA Intellio family driver version 6.0k [ 5.858389] Initializing Nozomi driver 2.1d [ 5.860509] RocketPort device driver module, version 2.09, 12-June-2003 [ 5.863503] No rocketport ports found; unloading driver [ 5.865788] SyncLink GT [ 5.867222] SyncLink GT, tty major#247 [ 5.869122] SyncLink GT no devices found [ 5.871172] SyncLink MultiPort driver $Revision: 4.38 $ [ 5.881792] SyncLink MultiPort driver $Revision: 4.38 $, tty major#246 [ 5.884751] SyncLink serial driver $Revision: 4.38 $ [ 5.912559] SyncLink serial driver $Revision: 4.38 $, tty major#245 [ 5.915837] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 5.919065] ac.o: No PCI boards found. [ 5.921003] ac.o: For an ISA board you must supply memory and irq parameters. [ 5.937472] Non-volatile memory driver v1.3 [ 5.940149] smapi::smapi_init, ERROR invalid usSmapiID [ 5.942481] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 5.946740] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 5.964882] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 5.967684] Linux agpgart interface v0.103 [ 5.969863] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 5.974009] Hangcheck: Using getrawmonotonic(). [ 5.976608] [drm] Initialized drm 1.1.0 20060810 [ 5.987796] [drm] radeon kernel modesetting enabled. [ 5.992176] [TTM] Zone kernel: Available graphics memory: 105520 kiB [ 5.995045] [TTM] Initializing pool allocator [ 6.007328] [TTM] Initializing DMA pool allocator [ 6.015052] [drm] fb mappable at 0x0 [ 6.016896] [drm] vram aper at 0x0 [ 6.018592] [drm] size 0 [ 6.032491] [drm] fb depth is 24 [ 6.034208] [drm] pitch is 3840 [ 6.035955] cirrusdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer [ 6.039626] [drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0 [ 6.067101] brd: module loaded [ 6.079426] loop: module loaded [ 6.081253] HP CISS Driver (v 3.6.26) [ 6.086905] mtip32xx Version 1.2.6os3 [ 6.089089] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 6.092558] lkdtm: No crash points registered, enable through debugfs [ 6.095837] Phantom Linux Driver, version n0.9.8, init OK [ 6.098865] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 6.102334] c2port c2port0: C2 port uc added [ 6.104300] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 6.108638] Uniform Multi-Platform E-IDE driver [ 6.110907] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) [ 6.113992] piix 0000:00:01.1: not 100% native mode: will probe irqs later [ 6.117073] pci 0000:00:01.1: setting latency timer to 64 [ 6.119719] ide0: BM-DMA at 0xc060-0xc067 [ 6.122180] ide1: BM-DMA at 0xc068-0xc06f [ 6.122614] tsc: Refined TSC clocksource calibration: 2260.997 MHz [ 6.127293] Probing IDE interface ide0... [ 6.670394] Probing IDE interface ide1... [ 7.373867] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive [ 8.023723] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [ 8.026604] hdc: MWDMA2 mode selected [ 8.028692] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 8.030992] ide1 at 0x170-0x177,0x376 on irq 15 [ 8.034643] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 8.053578] ide-gd driver 1.18 [ 8.055126] ide-cd driver 5.00 [ 8.057465] ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache [ 8.060711] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 8.069040] Loading iSCSI transport class v2.0-870. [ 8.079553] rdac: device handler registered [ 8.084355] hp_sw: device handler registered [ 8.086403] emc: device handler registered [ 8.089658] alua: device handler registered [ 8.092946] osst :I: Tape driver with OnStream support version 0.99.4 [ 8.092946] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 8.126165] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 8.148963] SSFDC read-only Flash Translation layer [ 8.167632] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 8.171622] device id = 2440 [ 8.173103] device id = 2480 [ 8.174932] device id = 24c0 [ 8.176465] device id = 24d0 [ 8.178250] device id = 25a1 [ 8.179817] device id = 2670 [ 8.181708] Could not find PAR responsible for SC520CDP Flash Bank #0 [ 8.184699] Trying default address 0x8400000 [ 8.187201] Could not find PAR responsible for SC520CDP Flash Bank #1 [ 8.190610] Trying default address 0x8c00000 [ 8.192929] Could not find PAR responsible for SC520CDP DIL Flash [ 8.195916] Trying default address 0x9400000 [ 8.198077] SC520 CDP flash device: 0x800000 at 0x8400000 [ 8.200687] Failed to ioremap_nocache [ 8.202625] NetSc520 flash device: 0x100000 at 0x200000 [ 8.205179] Failed to ioremap_nocache [ 8.207162] Failed to ioremap_nocache [ 8.209793] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks. [ 8.213879] pmc551: not detected [ 8.217826] ftl_cs: FTL header not found. [ 8.267254] No valid DiskOnChip devices found [ 8.269692] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 8.274194] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 8.285901] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 8.290914] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 8.295585] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 8.300154] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [ 8.304608] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit), 128MiB, page size: 512, OOB size: 16 [ 8.310223] flash size: 128 MiB [ 8.311930] page size: 512 bytes [ 8.314038] OOB area size: 16 bytes [ 8.316027] sector size: 16 KiB [ 8.318234] pages number: 262144 [ 8.320273] pages per sector: 32 [ 8.322051] bus width: 8 [ 8.323645] bits in sector size: 14 [ 8.325444] bits in page size: 9 [ 8.327234] bits in OOB size: 4 [ 8.329006] flash size with OOB: 135168 KiB [ 8.331135] page address bytes: 4 [ 8.332932] sector address bytes: 3 [ 8.336845] options: 0x42 [ 8.343661] Scanning device for bad blocks [ 8.457865] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit": [ 8.463849] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [ 8.473475] ftl_cs: FTL header not found. [ 8.506095] HSI/SSI char device loaded [ 8.509345] spi_ks8995: Micrel KS8995 Ethernet switch SPI driver version 0.1.1 [ 8.512827] vcan: Virtual CAN interface driver [ 8.514934] slcan: serial line CAN interface driver [ 8.517186] slcan: 10 dynamic interface channels. [ 8.519424] mkiss: AX.25 Multikiss, Hans Albas PE1AYX [ 8.534728] YAM driver version 0.8 by F1OAT/F6FBB [ 8.538333] AX.25: bpqether driver version 004 [ 8.540466] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 8.540466] baycom_ser_fdx: version 0.10 [ 8.559443] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA [ 8.561954] hdlcdrv: version 0.8 [ 8.564807] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). [ 8.600997] Generic UIO driver for PCI 2.3 devices version: 0.01.0 [ 8.607834] aoe: AoE v81 initialised. [ 8.610136] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 8.615219] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.617598] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.632085] mousedev: PS/2 mouse device common for all mice [ 8.634495] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0) [ 8.638650] apanel: Fujitsu BIOS signature 'FJKEYINF' not found... [ 8.641817] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 8.644746] evbug: Connected device: input1 (PC Speaker at isa0061/input0) [ 8.648129] I2O subsystem v1.325 [ 8.648979] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 8.649097] evbug: Connected device: input2 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 8.658116] i2o: max drivers = 8 [ 8.673490] I2O Block Device OSM v1.325 [ 8.675937] I2O ProcFS OSM v1.316 [ 8.679546] rtc-test rtc-test.0: rtc core: registered test as rtc0 [ 8.688562] rtc-test rtc-test.1: rtc core: registered test as rtc1 [ 8.692099] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 8.797789] pps pps0: new PPS source ktimer [ 8.799796] pps pps0: ktimer PPS source registered [ 8.802085] Driver for 1-wire Dallas network protocol. [ 8.804679] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 8.807631] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko [ 8.811858] power_supply test_ac: uevent [ 8.813767] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 8.816215] power_supply test_ac: prop ONLINE=1 [ 8.830523] power_supply test_ac: power_supply_changed [ 8.832823] power_supply test_ac: power_supply_changed_work [ 8.835356] power_supply test_ac: uevent [ 8.840075] power_supply test_ac: POWER_SUPPLY_NAME=test_ac [ 8.842443] power_supply test_ac: prop ONLINE=1 [ 8.854496] power_supply test_battery: uevent [ 8.856527] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 8.859375] power_supply test_battery: prop STATUS=Discharging [ 8.861962] power_supply test_battery: prop CHARGE_TYPE=Fast [ 8.864444] power_supply test_battery: prop HEALTH=Good [ 8.866794] power_supply test_battery: prop PRESENT=1 [ 8.878045] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 8.880613] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 8.883295] power_supply test_battery: prop CHARGE_FULL=100 [ 8.895975] power_supply test_battery: prop CHARGE_NOW=50 [ 8.898378] power_supply test_battery: prop CAPACITY=50 [ 8.900744] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 8.903404] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 8.916933] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 8.921690] power_supply test_battery: prop MODEL_NAME=Test battery [ 8.926782] power_supply test_battery: prop MANUFACTURER=Linux [ 8.932539] power_supply test_battery: prop SERIAL_NUMBER=3.10.0-rc4-00064-gf284b773 [ 8.940418] power_supply test_battery: prop TEMP=26 [ 8.948700] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 8.951818] power_supply test_battery: power_supply_changed [ 8.956460] power_supply test_battery: power_supply_changed_work [ 8.962251] power_supply test_battery: uevent [ 8.962918] power_supply test_usb: uevent [ 8.962921] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 8.962932] power_supply test_usb: prop ONLINE=1 [ 8.962970] power_supply test_usb: power_supply_changed [ 8.963031] power_supply test_usb: power_supply_changed_work [ 8.963044] power_supply test_usb: uevent [ 8.963046] power_supply test_usb: POWER_SUPPLY_NAME=test_usb [ 8.963054] power_supply test_usb: prop ONLINE=1 [ 9.006117] power_supply test_battery: POWER_SUPPLY_NAME=test_battery [ 9.009980] power_supply test_battery: prop STATUS=Discharging [ 9.015617] power_supply test_battery: prop CHARGE_TYPE=Fast [ 9.019780] power_supply test_battery: prop HEALTH=Good [ 9.025586] power_supply test_battery: prop PRESENT=1 [ 9.035991] power_supply test_battery: prop TECHNOLOGY=Li-ion [ 9.038561] power_supply test_battery: prop CHARGE_FULL_DESIGN=100 [ 9.041271] power_supply test_battery: prop CHARGE_FULL=100 [ 9.043706] power_supply test_battery: prop CHARGE_NOW=50 [ 9.046109] power_supply test_battery: prop CAPACITY=50 [ 9.051495] power_supply test_battery: prop CAPACITY_LEVEL=Normal [ 9.057534] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600 [ 9.072911] power_supply test_battery: prop TIME_TO_FULL_NOW=3600 [ 9.073153] w83793: Detection failed at check vendor id [ 9.081124] power_supply test_battery: prop MODEL_NAME=Test battery [ 9.094886] power_supply test_battery: prop MANUFACTURER=Linux [ 9.097552] power_supply test_battery: prop SERIAL_NUMBER=3.10.0-rc4-00064-gf284b773 [ 9.101221] power_supply test_battery: prop TEMP=26 [ 9.103458] power_supply test_battery: prop VOLTAGE_NOW=3300 [ 9.111651] w83793: Detection failed at check vendor id [ 9.140138] w83793: Detection failed at check vendor id [ 9.167018] w83793: Detection failed at check vendor id [ 9.184358] i2c i2c-0: w83795: Detection failed at addr 0x2c, check bank [ 9.227302] i2c i2c-0: w83795: Detection failed at addr 0x2d, check bank [ 9.286599] i2c i2c-0: w83795: Detection failed at addr 0x2e, check bank [ 9.316961] i2c i2c-0: w83795: Detection failed at addr 0x2f, check bank [ 9.400177] detect failed, chip not detected! [ 9.427117] detect failed, chip not detected! [ 9.454217] detect failed, chip not detected! [ 9.480158] detect failed, chip not detected! [ 9.506807] detect failed, chip not detected! [ 9.533464] detect failed, chip not detected! [ 9.560944] detect failed, chip not detected! [ 9.587298] detect failed, chip not detected! [ 9.613472] detect failed, chip not detected! [ 9.626815] i2c i2c-0: ADM1025 detection failed at 0x2c [ 9.641838] i2c i2c-0: ADM1025 detection failed at 0x2d [ 9.657372] i2c i2c-0: ADM1025 detection failed at 0x2e [ 9.676986] i2c i2c-0: Detecting device at 0,0x2c with COMPANY: 0xff and VERSTEP: 0xff [ 9.680500] i2c i2c-0: Autodetecting device at 0,0x2c... [ 9.682727] i2c i2c-0: Autodetection failed [ 9.705417] i2c i2c-0: Detecting device at 0,0x2d with COMPANY: 0xff and VERSTEP: 0xff [ 9.709006] i2c i2c-0: Autodetecting device at 0,0x2d... [ 9.711437] i2c i2c-0: Autodetection failed [ 9.735317] i2c i2c-0: Detecting device at 0,0x2e with COMPANY: 0xff and VERSTEP: 0xff [ 9.738882] i2c i2c-0: Autodetecting device at 0,0x2e... [ 9.741263] i2c i2c-0: Autodetection failed [ 10.094591] i2c i2c-0: detect fail: address match, 0x2c [ 10.114513] i2c i2c-0: detect fail: address match, 0x2d [ 10.136066] i2c i2c-0: detect fail: address match, 0x2e [ 10.154715] i2c i2c-0: detect fail: address match, 0x2f [ 10.480264] f71882fg: Not a Fintek device [ 10.482458] f71882fg: Not a Fintek device [ 10.616840] (null): Unknown chip type, skipping [ 10.630152] (null): Unknown chip type, skipping [ 15.703478] i2c i2c-0: LM83 detection failed at 0x18 [ 15.716866] i2c i2c-0: LM83 detection failed at 0x19 [ 15.730176] i2c i2c-0: LM83 detection failed at 0x1a [ 15.743477] i2c i2c-0: LM83 detection failed at 0x29 [ 15.756860] i2c i2c-0: LM83 detection failed at 0x2a [ 15.770163] i2c i2c-0: LM83 detection failed at 0x2b [ 15.783477] i2c i2c-0: LM83 detection failed at 0x4c [ 15.796854] i2c i2c-0: LM83 detection failed at 0x4d [ 15.810191] i2c i2c-0: LM83 detection failed at 0x4e [ 15.830168] i2c i2c-0: Detecting device at 0x2c with COMPANY: 0xff and VERSTEP: 0xff [ 15.840893] i2c i2c-0: Autodetection failed: unsupported version [ 15.863462] i2c i2c-0: Detecting device at 0x2d with COMPANY: 0xff and VERSTEP: 0xff [ 15.867568] i2c i2c-0: Autodetection failed: unsupported version [ 15.890142] i2c i2c-0: Detecting device at 0x2e with COMPANY: 0xff and VERSTEP: 0xff [ 15.894884] i2c i2c-0: Autodetection failed: unsupported version [ 16.140164] i2c i2c-0: detect failed, bad manufacturer id 0xff! [ 16.157097] i2c i2c-0: detect failed, bad manufacturer id 0xff! [ 16.174286] i2c i2c-0: detect failed, bad manufacturer id 0xff! [ 16.320324] i2c i2c-0: MAX1619 detection failed at 0x18 [ 16.346884] i2c i2c-0: MAX1619 detection failed at 0x19 [ 16.373784] i2c i2c-0: MAX1619 detection failed at 0x1a [ 16.400794] i2c i2c-0: MAX1619 detection failed at 0x29 [ 16.427333] i2c i2c-0: MAX1619 detection failed at 0x2a [ 16.453531] i2c i2c-0: MAX1619 detection failed at 0x2b [ 16.480129] i2c i2c-0: MAX1619 detection failed at 0x4c [ 16.506944] i2c i2c-0: MAX1619 detection failed at 0x4d [ 16.534077] i2c i2c-0: MAX1619 detection failed at 0x4e [ 16.707410] pc87360: PC8736x not detected, module not inserted [ 16.716842] thmc50: Probing for THMC50 at 0x2C on bus 0 [ 16.743468] thmc50: Probing for THMC50 at 0x2D on bus 0 [ 16.770124] thmc50: Probing for THMC50 at 0x2E on bus 0 [ 16.870148] i2c i2c-0: w83l785ts: Read 0xff from register 0x40. [ 16.872602] i2c i2c-0: W83L785TS-S detection failed at 0x2e [ 16.886817] i2c i2c-0: W83L786NG detection failed at 0x2e [ 16.900133] i2c i2c-0: W83L786NG detection failed at 0x2f [ 16.903063] cpuidle: using governor ladder [ 16.905039] sdhci: Secure Digital Host Controller Interface driver [ 16.907588] sdhci: Copyright(c) Pierre Ossman [ 16.909662] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 16.912326] wbsd: Copyright(c) Pierre Ossman [ 16.916822] sdhci-pltfm: SDHCI platform and OF driver helper [ 20.626227] (null): enodev DEV ADDR = 0xFF [ 20.631298] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 20.634906] hidraw: raw HID events driver (C) Jiri Kosina [ 20.638751] NET: Registered protocol family 26 [ 20.659226] NET: Registered protocol family 17 [ 20.661467] NET: Registered protocol family 9 [ 20.663431] X.25 for Linux Version 0.2 [ 20.666401] NET: Registered protocol family 6 [ 20.671539] NET: Registered protocol family 11 [ 20.673594] NET: Registered protocol family 3 [ 20.675527] can: controller area network core (rev 20120528 abi 9) [ 20.678235] NET: Registered protocol family 29 [ 20.680153] can: raw protocol (rev 20120528) [ 20.682486] IrCOMM protocol (Dag Brattli) [ 20.686155] 8021q: 802.1Q VLAN Support v1.8 [ 20.688279] 9pnet: Installing 9P2000 support [ 20.690419] NET: Registered protocol family 36 [ 20.693664] batman_adv: B.A.T.M.A.N. advanced 2013.2.0 (compatibility version 14) loaded [ 20.702797] openvswitch: Open vSwitch switching datapath [ 20.711633] [ 20.711633] printing PIC contents [ 20.715759] ... PIC IMR: ffff [ 20.718813] ... PIC IRR: 9013 [ 20.722601] ... PIC ISR: 0000 [ 20.726359] ... PIC ELCR: 0c00 [ 20.729123] printing local APIC contents on CPU#0/0: [ 20.731301] ... APIC ID: 00000000 (0) [ 20.732439] ... APIC VERSION: 00050014 [ 20.732439] ... APIC TASKPRI: 00000000 (00) [ 20.732439] ... APIC PROCPRI: 00000000 [ 20.732439] ... APIC LDR: 01000000 [ 20.732439] ... APIC DFR: ffffffff [ 20.732439] ... APIC SPIV: 000001ff [ 20.732439] ... APIC ISR field: [ 20.732439] 0000000000000000000000000000000000000000000000000000000000000000 [ 20.732439] ... APIC TMR field: [ 20.732439] 0000000000000000000000000000000000000000000000000000000000000000 [ 20.732439] ... APIC IRR field: [ 20.732439] 0000000000000000000000000000000000000000000000000000000000000000 [ 20.732439] ... APIC ESR: 00000000 [ 20.732439] ... APIC ICR: 000008fd [ 20.732439] ... APIC ICR2: 02000000 [ 20.732439] ... APIC LVTT: 000000ef [ 20.732439] ... APIC LVTPC: 00010000 [ 20.732439] ... APIC LVT0: 00010700 [ 20.732439] ... APIC LVT1: 00000400 [ 20.732439] ... APIC LVTERR: 000000fe [ 20.732439] ... APIC TMICT: 008566dc [ 20.732439] ... APIC TMCCT: 001972c8 [ 20.732439] ... APIC TDCR: 00000003 [ 20.732439] [ 20.814438] number of MP IRQ sources: 15. [ 20.822807] number of IO-APIC #2 registers: 24. [ 20.827068] testing the IO APIC....................... [ 20.832651] IO APIC #2...... [ 20.835222] .... register #00: 00000000 [ 20.838416] ....... : physical APIC id: 00 [ 20.842672] ....... : Delivery Type: 0 [ 20.846726] ....... : LTS : 0 [ 20.850774] .... register #01: 00170011 [ 20.854753] ....... : max redirection entries: 17 [ 20.859150] ....... : PRQ implemented: 0 [ 20.863399] ....... : IO APIC version: 11 [ 20.865975] .... register #02: 00000000 [ 20.867913] ....... : arbitration: 00 [ 20.876139] .... IRQ redirection table: [ 20.880148] 1 0 0 0 0 0 0 00 [ 20.884352] 0 0 0 0 0 1 1 31 [ 20.889661] 0 0 0 0 0 1 1 30 [ 20.894063] 0 0 0 0 0 1 1 33 [ 20.898372] 1 0 0 0 0 1 1 34 [ 20.900491] 1 1 0 0 0 1 1 35 [ 20.902599] 0 0 0 0 0 1 1 36 [ 20.907320] 0 0 0 0 0 1 1 37 [ 20.911711] 0 0 0 0 0 1 1 38 [ 20.915963] 0 1 0 0 0 1 1 39 [ 20.920886] 1 1 0 0 0 1 1 3A [ 20.929182] 1 1 0 0 0 1 1 3B [ 20.932390] 0 0 0 0 0 1 1 3C [ 20.934497] 0 0 0 0 0 1 1 3D [ 20.937681] 0 0 0 0 0 1 1 3E [ 20.947100] 0 0 0 0 0 1 1 3F [ 20.951191] 1 0 0 0 0 0 0 00 [ 20.954482] 1 0 0 0 0 0 0 00 [ 20.956989] 1 0 0 0 0 0 0 00 [ 20.960346] 1 0 0 0 0 0 0 00 [ 20.965149] 1 0 0 0 0 0 0 00 [ 20.973599] 1 0 0 0 0 0 0 00 [ 20.975938] 1 0 0 0 0 0 0 00 [ 20.978808] 1 0 0 0 0 0 0 00 [ 20.981022] IRQ to pin mappings: [ 20.982814] IRQ0 -> 0:2 [ 20.988168] IRQ1 -> 0:1 [ 20.989872] IRQ3 -> 0:3 [ 20.995173] IRQ4 -> 0:4 [ 20.997590] IRQ5 -> 0:5 [ 21.002915] IRQ6 -> 0:6 [ 21.005639] IRQ7 -> 0:7 [ 21.007455] IRQ8 -> 0:8 [ 21.012741] IRQ9 -> 0:9 [ 21.014543] IRQ10 -> 0:10 [ 21.019809] IRQ11 -> 0:11 [ 21.021788] IRQ12 -> 0:12 [ 21.023611] IRQ13 -> 0:13 [ 21.025538] IRQ14 -> 0:14 [ 21.032426] IRQ15 -> 0:15 [ 21.034338] .................................... done. [ 21.038398] registered taskstats version 1 [ 21.041935] Key type trusted registered [ 21.048188] Key type encrypted registered [ 21.053781] IMA: No TPM chip found, activating TPM-bypass! [ 21.064116] register_blkdev: cannot get major 3 for hd [ 21.071386] rtc-test rtc-test.0: setting system clock to 2013-06-12 19:52:15 UTC (1371066735) [ 21.081757] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 21.087879] EDD information not available. [ 21.099357] Freeing unused kernel memory: 3020k freed [ 35.125005] CPA self-test: [ 35.126656] 4k 1022 large 126 gb 0 x 1[ffff88000009a000-ffff88000009a000] miss 0 [ 35.365059] 4k 62974 large 5 gb 0 x 1[ffff88000009a000-ffff88000009a000] miss 0 [ 35.540007] 4k 62974 large 5 gb 0 x 1[ffff88000009a000-ffff88000009a000] miss 0 [ 35.544317] ok. [ 86.883187] Unregister pv shared memory for cpu 0 [ 86.885706] Unregister pv shared memory for cpu 1 [ 86.891975] Disabling non-boot CPUs ... [ 86.924849] CPU0 attaching NULL sched-domain. [ 86.926548] CPU1 attaching NULL sched-domain. [ 86.932541] CPU0 attaching NULL sched-domain. [ 86.934992] numa_remove_cpu cpu 1 node 0: mask now 0 [ 86.940352] Restarting system. [ 86.941987] reboot: machine restart Elapsed time: 115