[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.0-rc5 (root@aep-vaio) (gcc version 4.6.3 (Gentoo 4.6.3 p1.11, pie-0.5.2) ) #2 SMP PREEMPT Fri Jun 14 07:54:22 YEKT 2013 [ 0.000000] Command line: root=/dev/vaio/gentoo64a-root rd.luks.uuid=luks-54ed2bf3-fb3d-4442-b8be-2f0cfda6a521 acpiphp.debug=1 initrd=/boot/initramfs.img BOOT_IMAGE=/boot/vmlinuz [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ae3efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009ae3f000-0x000000009aebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Sony Corporation VPCZ23A4R/VAIO, BIOS R1013H5 05/21/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 09B000000 mask FFF000000 uncachable [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 240000000 mask FF0000000 write-back [ 0.000000] 8 base 250000000 mask FF0000000 write-back [ 0.000000] 9 base 25FE00000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x026ba000, 0x026bafff] PGTABLE [ 0.000000] BRK [0x026bb000, 0x026bbfff] PGTABLE [ 0.000000] BRK [0x026bc000, 0x026bcfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25fc00000-0x25fdfffff] [ 0.000000] [mem 0x25fc00000-0x25fdfffff] page 2M [ 0.000000] BRK [0x026bd000, 0x026bdfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25fbfffff] [ 0.000000] [mem 0x25c000000-0x25fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff] [ 0.000000] [mem 0x200000000-0x25bffffff] page 2M [ 0.000000] BRK [0x026be000, 0x026befff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9ae3efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x9adfffff] page 2M [ 0.000000] [mem 0x9ae00000-0x9ae3efff] page 4k [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff] [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x7fac3000-0x7fffefff] [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 Sony) [ 0.000000] ACPI: XSDT 000000009affe120 00094 (v01 Sony VAIO 20120521 01000013) [ 0.000000] ACPI: FACP 000000009affc000 000F4 (v04 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: DSDT 000000009aff0000 08607 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: FACS 000000009af6e000 00040 [ 0.000000] ACPI: ASF! 000000009affd000 000A5 (v32 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: HPET 000000009affb000 00038 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: APIC 000000009affa000 0008C (v02 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: MCFG 000000009aff9000 0003C (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: SLIC 000000009afef000 00176 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: WDAT 000000009afee000 00224 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afed000 00CA6 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: BOOT 000000009afeb000 00028 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe9000 0022B (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: ASPT 000000009afe6000 00034 (v07 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe5000 00846 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe4000 00996 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe3000 00EE8 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25fdfffff] [ 0.000000] NODE_DATA [mem 0x25fdf4000-0x25fdf8fff] [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257400000-ffff88025f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x25fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0008efff] [ 0.000000] node 0: [mem 0x00100000-0x9ae3efff] [ 0.000000] node 0: [mem 0x9afff000-0x9affffff] [ 0.000000] node 0: [mem 0x100000000-0x25fdfffff] [ 0.000000] On node 0 totalpages: 2075598 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 142 pages reserved [ 0.000000] DMA zone: 3982 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9849 pages used for memmap [ 0.000000] DMA32 zone: 630336 pages, LIFO batch:31 [ 0.000000] Normal zone: 22520 pages used for memmap [ 0.000000] Normal zone: 1441280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000 [ 0.000000] PM: Registered nosave memory: 0000000000090000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000009ae3f000 - 000000009aebf000 [ 0.000000] PM: Registered nosave memory: 000000009aebf000 - 000000009afbf000 [ 0.000000] PM: Registered nosave memory: 000000009afbf000 - 000000009afff000 [ 0.000000] PM: Registered nosave memory: 000000009b000000 - 000000009fa00000 [ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025fa00000 s83904 r8192 d22592 u262144 [ 0.000000] pcpu-alloc: s83904 r8192 d22592 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2043023 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/vaio/gentoo64a-root rd.luks.uuid=luks-54ed2bf3-fb3d-4442-b8be-2f0cfda6a521 acpiphp.debug=1 initrd=/boot/initramfs.img BOOT_IMAGE=/boot/vmlinuz [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8074252k/9959424k available (6576k kernel code, 1657032k absent, 228140k reserved, 6466k data, 980k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5855 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] kmemleak: Kernel memory leak detector disabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2793.687 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.37 BogoMIPS (lpj=2793687) [ 0.000122] pid_max: default: 32768 minimum: 301 [ 0.000237] Security Framework initialized [ 0.000823] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002402] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003100] Mount-cache hash table entries: 256 [ 0.003767] Initializing cgroup subsys memory [ 0.003848] Initializing cgroup subsys devices [ 0.003932] Initializing cgroup subsys freezer [ 0.004484] Initializing cgroup subsys blkio [ 0.004543] Initializing cgroup subsys net_prio [ 0.004602] Initializing cgroup subsys hugetlb [ 0.004705] CPU: Physical Processor ID: 0 [ 0.004763] CPU: Processor Core ID: 0 [ 0.004823] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.004919] mce: CPU supports 7 MCE banks [ 0.004985] CPU0: Thermal monitoring enabled (TM1) [ 0.005055] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 5 [ 0.005317] Freeing SMP alternatives: 24k freed [ 0.005383] ACPI: Core revision 20130328 [ 0.016568] ACPI: All ACPI Tables successfully acquired [ 0.028849] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.038929] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07) [ 0.039130] TSC deadline timer enabled [ 0.039145] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.039385] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.039465] ... version: 3 [ 0.039523] ... bit width: 48 [ 0.039581] ... generic registers: 4 [ 0.039638] ... value mask: 0000ffffffffffff [ 0.039697] ... max period: 000000007fffffff [ 0.039756] ... fixed-purpose events: 3 [ 0.039814] ... event mask: 000000070000000f [ 0.049505] SMP alternatives: lockdep: fixing up alternatives [ 0.063156] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.049584] smpboot: Booting Node 0, Processors #1 [ 0.065090] SMP alternatives: lockdep: fixing up alternatives [ 0.065204] #2 [ 0.080552] SMP alternatives: lockdep: fixing up alternatives [ 0.080668] #3 [ 0.093991] Brought up 4 CPUs [ 0.094100] smpboot: Total of 4 processors activated (22349.49 BogoMIPS) [ 0.097721] devtmpfs: initialized [ 0.100300] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes) [ 0.100632] xor: automatically using best checksumming function: [ 0.110083] avx : 20480.000 MB/sec [ 0.110317] NET: Registered protocol family 16 [ 0.110735] ACPI: bus type PCI registered [ 0.110794] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.110928] dca service started, version 1.12.1 [ 0.111045] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.111129] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.133679] PCI: Using configuration type 1 for base access [ 0.135790] bio: create slab at 0 [ 0.152258] raid6: sse2x1 7582 MB/s [ 0.169305] raid6: sse2x2 9320 MB/s [ 0.186358] raid6: sse2x4 10820 MB/s [ 0.186415] raid6: using algorithm sse2x4 (10820 MB/s) [ 0.186475] raid6: using ssse3x2 recovery algorithm [ 0.186610] ACPI: Added _OSI(Module Device) [ 0.186669] ACPI: Added _OSI(Processor Device) [ 0.186728] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.186787] ACPI: Added _OSI(Processor Aggregator Device) [ 0.191452] ACPI: EC: Look up EC in DSDT [ 0.195975] ACPI: Executed 1 blocks of module-level executable AML code [ 0.204580] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.212509] ACPI: SSDT 000000009ae70718 0067C (v01 Sony VAIO 20120521 INTL 20100121) [ 0.213836] ACPI: Dynamic OEM Table Load: [ 0.213973] ACPI: SSDT (null) 0067C (v01 Sony VAIO 20120521 INTL 20100121) [ 0.217817] ACPI: SSDT 000000009ae71a98 00303 (v01 Sony VAIO 20120521 INTL 20100121) [ 0.219202] ACPI: Dynamic OEM Table Load: [ 0.219339] ACPI: SSDT (null) 00303 (v01 Sony VAIO 20120521 INTL 20100121) [ 0.222722] ACPI: SSDT 000000009ae6fd98 00119 (v01 Sony VAIO 20120521 INTL 20100121) [ 0.224054] ACPI: Dynamic OEM Table Load: [ 0.224190] ACPI: SSDT (null) 00119 (v01 Sony VAIO 20120521 INTL 20100121) [ 0.635788] ACPI: Interpreter enabled [ 0.635853] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.636012] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.636198] ACPI: (supports S0 S3 S4 S5) [ 0.636256] ACPI: Using IOAPIC for interrupt routing [ 0.636349] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.637284] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.654374] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.654551] \_SB_.PCI0:_OSC invalid UUID [ 0.654553] _OSC request data:1 8 0 [ 0.655509] PCI host bridge to bus 0000:00 [ 0.655575] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.655637] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.655699] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.655760] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.655823] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] [ 0.655921] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.656132] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 0.656147] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.656156] pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.656162] pci 0000:00:02.0: reg 20: [io 0xa000-0xa03f] [ 0.656350] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.656388] pci 0000:00:16.0: reg 10: [mem 0xd9404000-0xd940400f 64bit] [ 0.656519] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.656702] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.657001] pci 0000:00:1a.0: reg 10: [mem 0xd9409000-0xd94093ff] [ 0.658711] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.658805] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.658976] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.659005] pci 0000:00:1b.0: reg 10: [mem 0xd9400000-0xd9403fff 64bit] [ 0.659143] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.659196] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.659318] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.659461] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.659517] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.659635] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.659783] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.659845] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.659965] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.660110] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.660173] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.660290] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.660436] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.660503] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.660625] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400 [ 0.660776] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.660848] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 0.660980] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.661279] pci 0000:00:1d.0: reg 10: [mem 0xd9408000-0xd94083ff] [ 0.662985] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.663051] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.663171] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100 [ 0.663412] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400 [ 0.663451] pci 0000:00:1f.2: reg 10: [io 0xa088-0xa08f] [ 0.663466] pci 0000:00:1f.2: reg 14: [io 0xa094-0xa097] [ 0.663481] pci 0000:00:1f.2: reg 18: [io 0xa080-0xa087] [ 0.663494] pci 0000:00:1f.2: reg 1c: [io 0xa090-0xa093] [ 0.663509] pci 0000:00:1f.2: reg 20: [io 0xa060-0xa07f] [ 0.663523] pci 0000:00:1f.2: reg 24: [mem 0xd9407000-0xd94077ff] [ 0.663622] pci 0000:00:1f.2: PME# supported from D3hot [ 0.663736] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.663765] pci 0000:00:1f.3: reg 10: [mem 0xd9405000-0xd94050ff 64bit] [ 0.663807] pci 0000:00:1f.3: reg 20: [io 0xa040-0xa05f] [ 0.664277] pci 0000:02:00.0: [8086:0091] type 00 class 0x028000 [ 0.664633] pci 0000:02:00.0: reg 10: [mem 0xd8400000-0xd8401fff 64bit] [ 0.666217] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.666415] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.668158] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.668224] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.668230] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff] [ 0.668240] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.668372] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.668400] pci 0000:03:00.0: reg 10: [mem 0xd7400000-0xd7400fff] [ 0.668608] pci 0000:03:00.0: supports D1 D2 [ 0.668610] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.668661] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.670035] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.670121] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff] [ 0.670127] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff] [ 0.670137] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.670325] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.670362] pci 0000:04:00.0: reg 10: [mem 0xd6400000-0xd6401fff 64bit] [ 0.670559] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.670616] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.670755] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.670819] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff] [ 0.670824] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff] [ 0.670834] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref] [ 0.671025] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.671100] pci 0000:05:00.0: reg 10: [io 0x6000-0x60ff] [ 0.671234] pci 0000:05:00.0: reg 18: [mem 0xd3404000-0xd3404fff 64bit pref] [ 0.671316] pci 0000:05:00.0: reg 20: [mem 0xd3400000-0xd3403fff 64bit pref] [ 0.671686] pci 0000:05:00.0: supports D1 D2 [ 0.671687] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.671822] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.673085] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.673164] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.673169] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff] [ 0.673179] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref] [ 0.673285] pci 0000:00:1c.6: PCI bridge to [bus 08-20] [ 0.673350] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff] [ 0.673356] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff] [ 0.673366] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref] [ 0.673476] \_SB_.PCI0:_OSC invalid UUID [ 0.673477] _OSC request data:1 1f 0 [ 0.673482] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.673558] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.673830] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:08:00 [ 0.673940] acpiphp: Slot [1] registered [ 0.675719] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.676403] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.677030] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.677660] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.678290] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.678965] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.679686] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.680314] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.681707] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.681851] acpi root: \_SB_.PCI0 notify handler is installed [ 0.682002] Found 1 acpi root devices [ 0.682130] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.682527] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.682611] vgaarb: loaded [ 0.682666] vgaarb: bridge control possible 0000:00:02.0 [ 0.682802] SCSI subsystem initialized [ 0.682860] ACPI: bus type ATA registered [ 0.683001] libata version 3.00 loaded. [ 0.683014] ACPI: bus type USB registered [ 0.683096] usbcore: registered new interface driver usbfs [ 0.683169] usbcore: registered new interface driver hub [ 0.683264] usbcore: registered new device driver usb [ 0.683367] PCI: Using ACPI for IRQ routing [ 0.691503] PCI: pci_cache_line_size set to 64 bytes [ 0.691693] e820: reserve RAM buffer [mem 0x0008f400-0x0008ffff] [ 0.691701] e820: reserve RAM buffer [mem 0x9ae3f000-0x9bffffff] [ 0.691703] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff] [ 0.691705] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff] [ 0.692050] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.692468] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.694551] Switching to clocksource hpet [ 0.701194] pnp: PnP ACPI init [ 0.701280] ACPI: bus type PNP registered [ 0.701450] pnp 00:00: [dma 4] [ 0.701504] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.701542] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.701663] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.701715] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.701789] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.701852] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.701914] system 00:04: [io 0xffff] has been reserved [ 0.701974] system 00:04: [io 0xffff] has been reserved [ 0.702034] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.702096] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.702158] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.702220] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.702282] system 00:04: [io 0x2000] has been reserved [ 0.702343] system 00:04: [io 0x2004] has been reserved [ 0.702406] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.702449] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.702515] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.702578] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.702629] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.702688] pnp 00:08: Plug and Play ACPI device, IDs SNY9015 PNP0f13 (active) [ 0.702876] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.702940] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.703003] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.703066] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.703129] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.703193] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.703255] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.703318] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.703384] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.703447] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.703512] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.704302] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved [ 0.704374] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved [ 0.704445] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.704467] pnp: PnP ACPI: found 11 devices [ 0.704527] ACPI: bus type PNP unregistered [ 0.712702] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.712766] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.712834] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff] [ 0.712901] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.712984] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.713046] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff] [ 0.713115] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff] [ 0.713670] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.713754] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.713816] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff] [ 0.713883] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff] [ 0.713950] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref] [ 0.714033] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.714095] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.714162] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff] [ 0.714228] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref] [ 0.714311] pci 0000:00:1c.6: PCI bridge to [bus 08-20] [ 0.714374] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff] [ 0.714441] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff] [ 0.714508] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref] [ 0.715019] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.715021] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.715023] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.715025] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.715027] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.715028] pci_bus 0000:02: resource 1 [mem 0xd8400000-0xd93fffff] [ 0.715030] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.715032] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] [ 0.715033] pci_bus 0000:03: resource 1 [mem 0xd7400000-0xd83fffff] [ 0.715035] pci_bus 0000:03: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.715037] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff] [ 0.715039] pci_bus 0000:04: resource 1 [mem 0xd6400000-0xd73fffff] [ 0.715040] pci_bus 0000:04: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref] [ 0.715042] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] [ 0.715044] pci_bus 0000:05: resource 1 [mem 0xd5400000-0xd63fffff] [ 0.715045] pci_bus 0000:05: resource 2 [mem 0xd3400000-0xd43fffff 64bit pref] [ 0.715047] pci_bus 0000:08: resource 0 [io 0x3000-0x5fff] [ 0.715049] pci_bus 0000:08: resource 1 [mem 0xb0000000-0xcfffffff] [ 0.715050] pci_bus 0000:08: resource 2 [mem 0xd4400000-0xd53fffff 64bit pref] [ 0.715097] NET: Registered protocol family 2 [ 0.715603] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.716088] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 0.719575] TCP: Hash tables configured (established 65536 bind 65536) [ 0.719705] TCP: reno registered [ 0.719811] UDP hash table entries: 4096 (order: 7, 655360 bytes) [ 0.720354] UDP-Lite hash table entries: 4096 (order: 7, 655360 bytes) [ 0.721067] NET: Registered protocol family 1 [ 0.721142] pci 0000:00:02.0: Boot video device [ 0.754828] PCI: CLS 64 bytes, default 64 [ 0.754985] Unpacking initramfs... [ 0.839859] Freeing initrd memory: 5360k freed [ 0.840616] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.840683] software IO TLB [mem 0x96e3f000-0x9ae3f000] (64MB) mapped at [ffff880096e3f000-ffff88009ae3efff] [ 0.840798] Simple Boot Flag at 0x44 set to 0x1 [ 0.841484] audit: initializing netlink socket (disabled) [ 0.841577] type=2000 audit(1371181871.818:1): initialized [ 0.862138] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.864762] VFS: Disk quotas dquot_6.5.2 [ 0.864882] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.865526] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.865883] NILFS version 2 loaded [ 0.866136] bio: create slab at 1 [ 0.866456] Btrfs loaded [ 0.866520] msgmni has been set to 15780 [ 0.867213] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.867303] io scheduler noop registered [ 0.867361] io scheduler deadline registered [ 0.867482] io scheduler cfq registered (default) [ 0.868056] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.868200] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.868263] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 [ 0.868346] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 0.868421] cpcihp_generic: not configured, disabling. [ 0.868501] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.871193] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed [ 0.871665] intel_idle: MWAIT substates: 0x21120 [ 0.871666] intel_idle: v0.4 model 0x2A [ 0.871667] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.871821] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.872099] ACPI: AC Adapter [ADP1] (off-line) [ 0.872393] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.872503] ACPI: Lid Switch [LID0] [ 0.872619] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.872725] ACPI: Power Button [PWRB] [ 0.872897] ACPI: Requesting acpi_cpufreq [ 0.880420] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.880484] ACPI: Thermal Zone [TZ01] (43 C) [ 0.880688] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 0.880934] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.885592] loop: module loaded [ 0.886078] mei_me 0000:00:16.0: setting latency timer to 64 [ 0.886196] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 0.887005] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.887096] ACPI: Battery Slot [BAT1] (battery present) [ 0.887268] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.887359] ACPI: Battery Slot [BAT2] (battery absent) [ 0.891382] Loading iSCSI transport class v2.0-870. [ 0.891586] iscsi: registered transport (tcp) [ 0.891711] ahci 0000:00:1f.2: version 3.0 [ 0.891897] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.891973] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode [ 0.892052] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part apst [ 0.892131] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.893129] scsi0 : ahci [ 0.893406] scsi1 : ahci [ 0.893568] scsi2 : ahci [ 0.893721] scsi3 : ahci [ 0.893870] scsi4 : ahci [ 0.894032] scsi5 : ahci [ 0.894150] ata1: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407100 irq 41 [ 0.894247] ata2: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407180 irq 41 [ 0.894322] ata3: DUMMY [ 0.894377] ata4: DUMMY [ 0.894433] ata5: DUMMY [ 0.894502] ata6: DUMMY [ 0.894789] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.897422] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.897674] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.897933] mousedev: PS/2 mouse device common for all mice [ 0.898453] rtc_cmos 00:05: RTC can wake from S4 [ 0.898758] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.898854] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.899003] Intel P-state driver initializing. [ 0.899082] Intel pstate controlling: cpu 0 [ 0.899217] Intel pstate controlling: cpu 1 [ 0.899296] Intel pstate controlling: cpu 2 [ 0.899371] Intel pstate controlling: cpu 3 [ 0.899658] cpuidle: using governor ladder [ 0.900195] cpuidle: using governor menu [ 0.900259] ledtrig-cpu: registered to indicate activity on CPUs [ 0.900337] hidraw: raw HID events driver (C) Jiri Kosina [ 0.900634] TCP: cubic registered [ 0.900693] Initializing XFRM netlink socket [ 0.900921] NET: Registered protocol family 10 [ 0.901402] NET: Registered protocol family 17 [ 0.901550] Key type dns_resolver registered [ 0.902033] PM: Hibernation image not present or could not be loaded. [ 0.902055] registered taskstats version 1 [ 0.903280] rtc_cmos 00:05: setting system clock to 2013-06-14 03:51:12 UTC (1371181872) [ 0.916752] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.199427] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.199580] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.200473] ata1.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM05S1Q, max UDMA/133 [ 1.200591] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.200732] ata2.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM05S1Q, max UDMA/133 [ 1.200834] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.201348] ata1.00: configured for UDMA/133 [ 1.201442] ata2.00: configured for UDMA/133 [ 1.202438] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5 [ 1.203392] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.203747] sd 0:0:0:0: [sda] Write Protect is off [ 1.203841] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.203930] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5 [ 1.203967] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.204333] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.204621] sd 1:0:0:0: [sdb] Write Protect is off [ 1.204699] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.204745] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.205183] sda: sda1 sda2 [ 1.205405] sda: p2 size 489641984 extends beyond EOD, enabling native capacity [ 1.205526] sdb: unknown partition table [ 1.206455] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.206971] sda: sda1 sda2 [ 1.207133] sda: p2 size 489641984 extends beyond EOD, truncated [ 1.207604] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.208499] Freeing unused kernel memory: 980k freed [ 1.208656] Write protecting the kernel read-only data: 12288k [ 1.211531] Freeing unused kernel memory: 1604k freed [ 1.213740] Freeing unused kernel memory: 1256k freed [ 1.238763] dracut: dracut-027-r3 [ 1.261311] device-mapper: uevent: version 1.0.3 [ 1.261543] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 1.265560] systemd-udevd[168]: starting version 204 [ 1.328501] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.328957] ehci-pci: EHCI PCI platform driver [ 1.329201] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 1.329273] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.329499] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.329632] ehci-pci 0000:00:1a.0: debug port 2 [ 1.333671] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.333736] ehci-pci 0000:00:1a.0: irq 23, io mem 0xd9409000 [ 1.339475] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.340389] hub 1-0:1.0: USB hub found [ 1.340513] hub 1-0:1.0: 2 ports detected [ 1.341159] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.341239] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 [ 1.341268] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 1.341635] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X [ 1.341644] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 1.341650] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.341657] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 1.341664] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 1.342363] xHCI xhci_add_endpoint called for root hub [ 1.342367] xHCI xhci_check_bandwidth called for root hub [ 1.342519] hub 2-0:1.0: USB hub found [ 1.342633] hub 2-0:1.0: 2 ports detected [ 1.343559] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.343653] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 1.343713] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.343724] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.343750] ehci-pci 0000:00:1d.0: debug port 2 [ 1.345256] xHCI xhci_add_endpoint called for root hub [ 1.345259] xHCI xhci_check_bandwidth called for root hub [ 1.345494] hub 3-0:1.0: USB hub found [ 1.345609] hub 3-0:1.0: 2 ports detected [ 1.347665] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.347700] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd9408000 [ 1.353482] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.353825] hub 4-0:1.0: USB hub found [ 1.353896] hub 4-0:1.0: 2 ports detected [ 1.375902] md: bind [ 1.583282] md: bind [ 1.591085] md: bind [ 1.591435] md: bind [ 1.593701] md: raid0 personality registered for level 0 [ 1.594216] md/raid0:md126: md_size is 500129792 sectors. [ 1.594276] md: RAID0 configuration for md126 - 1 zone [ 1.594345] md: zone0=[sda/sdb] [ 1.594525] zone-offset= 0KB, device-offset= 0KB, size= 250065152KB [ 1.594739] md126: detected capacity change from 0 to 256066453504 [ 1.596494] md126: p1 p2 [ 1.642853] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.680609] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x122c00, board id: 1690, fw id: 934878 [ 1.716466] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3 [ 1.758679] hub 1-1:1.0: USB hub found [ 1.758884] hub 1-1:1.0: 6 ports detected [ 1.843448] tsc: Refined TSC clocksource calibration: 2793.652 MHz [ 1.843588] Switching to clocksource tsc [ 1.862126] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.970431] dracut: luksOpen /dev/md126p2 luks-54ed2bf3-fb3d-4442-b8be-2f0cfda6a521 [ 1.977134] hub 4-1:1.0: USB hub found [ 1.977298] hub 4-1:1.0: 8 ports detected [ 2.052767] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.204931] usb 1-1.2: new full-speed USB device number 4 using ehci-pci [ 2.371128] usb 1-1.3: new high-speed USB device number 5 using ehci-pci [ 2.553350] usb 1-1.4: new high-speed USB device number 6 using ehci-pci [ 2.641307] usb 1-1.4: config 1 has an invalid interface number: 8 but max is 3 [ 2.641421] usb 1-1.4: config 1 has no interface number 1 [ 9.171232] sha256_ssse3: Using AVX optimized SHA-256 implementation [ 9.172773] bio: create slab at 2 [ 9.332803] dracut: Scanning devices dm-0 for LVM logical volumes vaio/gentoo64a-root [ 9.343531] dracut: inactive '/dev/vaio/gentoo64a-root' [16.00 GiB] inherit [ 9.343648] dracut: inactive '/dev/vaio/portage' [12.00 GiB] inherit [ 9.343773] dracut: inactive '/dev/vaio/home' [180.00 GiB] inherit [ 9.385518] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 9.397891] dracut: Checking ext4: /dev/vaio/gentoo64a-root [ 9.397985] dracut: issuing e2fsck -a /dev/vaio/gentoo64a-root [ 9.449676] dracut: /dev/vaio/gentoo64a-root: clean, 655115/1048576 files, 3910555/4194304 blocks [ 9.451397] dracut: Mounting /dev/vaio/gentoo64a-root with -o noatime,ro [ 9.455351] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 9.462476] dracut: Mounted root filesystem /dev/mapper/vaio-gentoo64a--root [ 9.476183] dracut: Switching root [ 9.791039] systemd-udevd[630]: starting version 204 [ 9.878506] ACPI Warning: 0x000000000000a040-0x000000000000a05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251) [ 9.878513] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.879322] Linux agpgart interface v0.103 [ 9.882426] [drm] Initialized drm 1.1.0 20060810 [ 9.882563] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251) [ 9.882571] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.882577] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 9.882582] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.882584] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 9.882589] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.882591] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 9.882596] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.882598] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 9.894139] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 9.898142] sony_laptop: Sony Notebook Control Driver v0.6 [ 9.901301] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input4 [ 9.901484] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input5 [ 9.908761] hda_codec: ALC275: SKU not ready 0x411111f0 [ 9.911055] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 9.920662] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 9.920802] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 9.922260] sony_laptop: brightness ignored, must be controlled by ACPI video driver [ 9.924242] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9.924589] r8169 0000:05:00.0: irq 48 for MSI/MSI-X [ 9.925036] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011aba000, 54:42:49:9a:df:1e, XID 0c900800 IRQ 48 [ 9.925038] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 9.925718] rtsx_pci 0000:03:00.0: irq 49 for MSI/MSI-X [ 9.925737] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 49 [ 9.928136] [drm] Memory usable by graphics device = 2048M [ 9.928182] i915 0000:00:02.0: setting latency timer to 64 [ 9.928922] cfg80211: Calling CRDA to update world regulatory domain [ 9.936122] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 9.936125] Copyright(c) 2003-2013 Intel Corporation [ 9.936561] iwlwifi 0000:02:00.0: irq 50 for MSI/MSI-X [ 9.942122] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 9.960415] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 9.960421] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 9.960423] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 9.960426] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled [ 9.960428] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled [ 9.960431] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 9.960559] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 9.975236] i915 0000:00:02.0: irq 51 for MSI/MSI-X [ 9.975261] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 9.975263] [drm] Driver supports precise vblank timestamp query. [ 9.976093] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 9.987203] media: Linux media interface: v0.10 [ 9.990695] Linux video capture interface: v2.00 [ 9.992170] Bluetooth: Core ver 2.16 [ 9.992258] NET: Registered protocol family 31 [ 9.992260] Bluetooth: HCI device and connection manager initialized [ 9.992320] Bluetooth: HCI socket layer initialized [ 9.992324] Bluetooth: L2CAP socket layer initialized [ 9.992337] Bluetooth: SCO socket layer initialized [ 9.994975] usbcore: registered new interface driver btusb [ 9.995102] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 9.996089] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 9.996737] uvcvideo: Found UVC 1.00 device USB2.0 Camera (05c8:0318) [ 9.997830] Error: Driver 'pcspkr' is already registered, aborting... [ 10.002561] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10 [ 10.003194] usbcore: registered new interface driver uvcvideo [ 10.003196] USB Video Class driver (1.1.1) [ 10.010026] usbcore: registered new interface driver usbserial [ 10.011234] usbcore: registered new interface driver usbserial_generic [ 10.011425] usbserial: USB Serial support registered for generic [ 10.014165] usbcore: registered new interface driver qcserial [ 10.014202] usbserial: USB Serial support registered for Qualcomm USB modem [ 10.015317] qcserial 1-1.4:1.0: Qualcomm USB modem converter detected [ 10.018152] usb 1-1.4: Qualcomm USB modem converter now attached to ttyUSB0 [ 10.019573] qcserial 1-1.4:1.2: Qualcomm USB modem converter detected [ 10.020441] usb 1-1.4: Qualcomm USB modem converter now attached to ttyUSB1 [ 10.020450] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 10.020453] [drm] This can cause pipe underruns and display issues. [ 10.020455] [drm] Please upgrade your BIOS to fix this. [ 10.020580] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14 [ 10.021475] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14 [ 10.021915] microcode: CPU0 updated to revision 0x28, date = 2012-04-24 [ 10.021926] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14 [ 10.021943] qcserial 1-1.4:1.3: Qualcomm USB modem converter detected [ 10.021963] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14 [ 10.022195] microcode: CPU1 updated to revision 0x28, date = 2012-04-24 [ 10.022219] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14 [ 10.022257] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14 [ 10.022499] microcode: CPU2 updated to revision 0x28, date = 2012-04-24 [ 10.022509] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14 [ 10.022553] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14 [ 10.022816] microcode: CPU3 updated to revision 0x28, date = 2012-04-24 [ 10.022832] perf_event_intel: PEBS enabled due to microcode update [ 10.022899] usb 1-1.4: Qualcomm USB modem converter now attached to ttyUSB2 [ 10.022906] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 10.035109] fbcon: inteldrmfb (fb0) is primary device [ 10.072988] iTCO_vendor_support: vendor-support=0 [ 10.074032] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 10.074069] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 10.113465] systemd-udevd[657]: renamed network interface eth0 to enp5s0 [ 10.128718] cfg80211: World regulatory domain updated: [ 10.128720] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.128722] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.128723] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.128725] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.128726] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.128727] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.129467] systemd-udevd[660]: renamed network interface wlan0 to wlp2s0 [ 11.743610] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on [ 11.833495] Console: switching to colour frame buffer device 240x67 [ 11.837605] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 11.837607] i915 0000:00:02.0: registered panic notifier [ 11.838065] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.838074] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.838083] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.838092] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.838101] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.838110] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.838118] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.839634] acpi device:3e: registered as cooling_device5 [ 11.839904] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 11.840060] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input11 [ 11.840632] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 12.828670] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 12.908764] EXT4-fs (md126p1): mounted filesystem with ordered data mode. Opts: (null) [ 12.913277] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 12.919400] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 13.368694] microcode: Microcode Update Driver: v2.00 removed. [ 13.856924] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 13.863933] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 14.248385] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 14.255245] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 14.464745] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 16.128442] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.128446] Bluetooth: BNEP filters: protocol multicast [ 16.128456] Bluetooth: BNEP socket layer initialized [ 16.294870] Bluetooth: RFCOMM TTY layer initialized [ 16.294888] Bluetooth: RFCOMM socket layer initialized [ 16.294890] Bluetooth: RFCOMM ver 1.11 [ 16.572822] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 16.574132] zram: Created 4 device(s) ... [ 16.586409] Adding 1572860k swap on /dev/zram0. Priority:10 extents:1 across:1572860k SSFS [ 16.594083] Adding 1572860k swap on /dev/zram1. Priority:10 extents:1 across:1572860k SSFS [ 16.600713] Adding 1572860k swap on /dev/zram2. Priority:10 extents:1 across:1572860k SSFS [ 16.607575] Adding 1572860k swap on /dev/zram3. Priority:10 extents:1 across:1572860k SSFS [ 18.089854] wlp2s0: authenticate with 08:60:6e:cc:a2:94 [ 18.095856] wlp2s0: send auth to 08:60:6e:cc:a2:94 (try 1/3) [ 18.120149] wlp2s0: authenticated [ 18.121447] wlp2s0: associate with 08:60:6e:cc:a2:94 (try 1/3) [ 18.122337] wlp2s0: RX AssocResp from 08:60:6e:cc:a2:94 (capab=0x11 status=0 aid=1) [ 18.126266] wlp2s0: associated [ 18.126684] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 20.707578] fuse init (API version 7.22) [ 20.973482] ata1.00: configured for UDMA/133 [ 20.973489] ata1: EH complete [ 20.974070] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 20.979380] ata2.00: configured for UDMA/133 [ 20.979386] ata2: EH complete [ 20.980084] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 21.128263] EXT4-fs (dm-1): re-mounted. Opts: commit=600 [ 21.137127] EXT4-fs (md126p1): re-mounted. Opts: commit=600 [ 21.139690] EXT4-fs (dm-2): re-mounted. Opts: commit=600 [ 21.169036] EXT4-fs (dm-3): re-mounted. Opts: commit=600 [ 27.135170] ata1.00: configured for UDMA/133 [ 27.135176] ata1: EH complete [ 27.135356] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.139840] ata2.00: configured for UDMA/133 [ 27.139846] ata2: EH complete [ 27.140073] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.164449] EXT4-fs (dm-1): re-mounted. Opts: commit=0 [ 27.168852] EXT4-fs (md126p1): re-mounted. Opts: commit=0 [ 27.171162] EXT4-fs (dm-2): re-mounted. Opts: commit=0 [ 27.181012] EXT4-fs (dm-3): re-mounted. Opts: commit=0 [ 28.429884] ACPI: \_SB_.DOCK: docking [ 28.430091] acpiphp_glue: _handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB [ 28.430168] acpiphp_glue: bus exists... trim [ 28.431135] ACPI: Device does not support D3cold [ 28.431287] ACPI: Device does not support D3cold [ 28.431616] ACPI: Device does not support D3cold [ 28.431711] ACPI: Device does not support D3cold [ 28.432394] ACPI: Device does not support D3cold [ 28.433867] ACPI: Device does not support D3cold [ 28.435039] ACPI: Device does not support D3cold [ 28.435780] ACPI: Device does not support D3cold [ 28.436574] ACPI: Device does not support D3cold [ 28.436674] ACPI: Device does not support D3cold [ 28.436719] ACPI: Device does not support D3cold [ 28.437297] ACPI: Device does not support D3cold [ 28.437395] ACPI: Device does not support D3cold [ 28.437490] ACPI: Device does not support D3cold [ 28.437572] ACPI: Device does not support D3cold [ 28.437640] ACPI: Device does not support D3cold [ 28.437687] ACPI: Device does not support D3cold [ 28.437753] ACPI: Device does not support D3cold [ 28.437804] ACPI: Device does not support D3cold [ 28.437850] ACPI: Device does not support D3cold [ 28.437901] ACPI: Device does not support D3cold [ 28.437946] ACPI: Device does not support D3cold [ 28.437992] ACPI: Device does not support D3cold [ 28.438072] ACPI: Device does not support D3cold [ 28.438907] ACPI: Device does not support D3cold [ 28.440976] ACPI: Device does not support D3cold [ 28.441882] ACPI: Device does not support D3cold [ 28.441950] ACPI: Device does not support D3cold [ 28.442013] ACPI: Device does not support D3cold [ 28.442164] ACPI: Device does not support D3cold [ 28.442270] ACPI: Device does not support D3cold [ 28.450807] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 28.450830] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 28.450848] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 28.450867] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 28.450884] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 28.450902] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 28.450920] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 28.451305] pci 0000:08:00.0: [8086:151b] type 01 class 0x060400 [ 28.451505] pci 0000:08:00.0: supports D1 D2 [ 28.451508] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.453630] pci 0000:0a:00.0: [8086:151b] type 01 class 0x060400 [ 28.453804] pci 0000:0a:00.0: supports D1 D2 [ 28.453807] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.455188] pci 0000:0a:03.0: [8086:151b] type 01 class 0x060400 [ 28.455372] pci 0000:0a:03.0: supports D1 D2 [ 28.455376] pci 0000:0a:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.455635] pci 0000:0a:04.0: [8086:151b] type 01 class 0x060400 [ 28.455812] pci 0000:0a:04.0: supports D1 D2 [ 28.455815] pci 0000:0a:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.456821] pci 0000:08:00.0: PCI bridge to [bus 0a-1d] [ 28.456838] pci 0000:08:00.0: bridge window [io 0x3000-0x5fff] [ 28.456846] pci 0000:08:00.0: bridge window [mem 0xb0000000-0xc03fffff] [ 28.456859] pci 0000:08:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 28.458055] pci 0000:0a:00.0: PCI bridge to [bus 0b] [ 28.458073] pci 0000:0a:00.0: bridge window [mem 0xc0300000-0xc03fffff] [ 28.458246] pci 0000:0a:03.0: PCI bridge to [bus 0c] [ 28.460038] pci 0000:14:00.0: [8086:151b] type 01 class 0x060400 [ 28.460356] pci 0000:14:00.0: supports D1 D2 [ 28.460360] pci 0000:14:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.470119] pci 0000:0a:04.0: PCI bridge to [bus 14-1d] [ 28.470135] pci 0000:0a:04.0: bridge window [io 0x3000-0x5fff] [ 28.470143] pci 0000:0a:04.0: bridge window [mem 0xb0000000-0xc02fffff] [ 28.470157] pci 0000:0a:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 28.470634] pci 0000:15:03.0: [8086:151b] type 01 class 0x060400 [ 28.470931] pci 0000:15:03.0: supports D1 D2 [ 28.470934] pci 0000:15:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.472850] pci 0000:15:04.0: [8086:151b] type 01 class 0x060400 [ 28.473099] pci 0000:15:04.0: supports D1 D2 [ 28.473102] pci 0000:15:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.477246] pci 0000:14:00.0: PCI bridge to [bus 15-1d] [ 28.477268] pci 0000:14:00.0: bridge window [io 0x3000-0x5fff] [ 28.477278] pci 0000:14:00.0: bridge window [mem 0xb0000000-0xc02fffff] [ 28.477296] pci 0000:14:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 28.478524] pci 0000:16:00.0: [1002:6740] type 00 class 0x030000 [ 28.478588] pci 0000:16:00.0: reg 10: [mem 0x00000000-0x0fffffff 64bit pref] [ 28.478639] pci 0000:16:00.0: reg 18: [mem 0x00000000-0x0001ffff 64bit] [ 28.478669] pci 0000:16:00.0: reg 20: [io 0x0000-0x00ff] [ 28.478735] pci 0000:16:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 28.478925] pci 0000:16:00.0: supports D1 D2 [ 28.481436] vgaarb: device added: PCI:0000:16:00.0,decodes=io+mem,owns=none,locks=none [ 28.481455] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 28.481456] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:16:00.0 [ 28.481566] pci 0000:16:00.1: [1002:aa90] type 00 class 0x040300 [ 28.481636] pci 0000:16:00.1: reg 10: [mem 0x00000000-0x00003fff 64bit] [ 28.481965] pci 0000:16:00.1: supports D1 D2 [ 28.482261] pci 0000:15:03.0: PCI bridge to [bus 16] [ 28.482280] pci 0000:15:03.0: bridge window [io 0x5000-0x5fff] [ 28.482291] pci 0000:15:03.0: bridge window [mem 0xc0200000-0xc02fffff] [ 28.482309] pci 0000:15:03.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 28.483523] pci 0000:17:00.0: [8086:151b] type 01 class 0x060400 [ 28.483870] pci 0000:17:00.0: supports D1 D2 [ 28.483873] pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.486275] pci 0000:15:04.0: PCI bridge to [bus 17-1d] [ 28.486292] pci 0000:15:04.0: bridge window [io 0x3000-0x4fff] [ 28.486301] pci 0000:15:04.0: bridge window [mem 0xc0000000-0xc01fffff] [ 28.486317] pci 0000:15:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 28.486603] pci 0000:18:00.0: [8086:151b] type 01 class 0x060400 [ 28.486954] pci 0000:18:00.0: supports D1 D2 [ 28.486957] pci 0000:18:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.488888] pci 0000:18:01.0: [8086:151b] type 01 class 0x060400 [ 28.489255] pci 0000:18:01.0: supports D1 D2 [ 28.489259] pci 0000:18:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.489476] pci 0000:18:02.0: [8086:151b] type 01 class 0x060400 [ 28.489794] pci 0000:18:02.0: supports D1 D2 [ 28.489795] pci 0000:18:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.490001] pci 0000:18:03.0: [8086:151b] type 01 class 0x060400 [ 28.490355] pci 0000:18:03.0: supports D1 D2 [ 28.490357] pci 0000:18:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.490570] pci 0000:18:04.0: [8086:151b] type 01 class 0x060400 [ 28.490884] pci 0000:18:04.0: supports D1 D2 [ 28.490886] pci 0000:18:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.491232] pci 0000:17:00.0: PCI bridge to [bus 18-1d] [ 28.491256] pci 0000:17:00.0: bridge window [io 0x3000-0x4fff] [ 28.491270] pci 0000:17:00.0: bridge window [mem 0xc0000000-0xc01fffff] [ 28.491293] pci 0000:17:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 28.491615] pci 0000:19:00.0: [10ec:8168] type 00 class 0x020000 [ 28.491681] pci 0000:19:00.0: reg 10: [io 0x0000-0x00ff] [ 28.491793] pci 0000:19:00.0: reg 18: [mem 0x00000000-0x00000fff 64bit pref] [ 28.491861] pci 0000:19:00.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref] [ 28.492169] pci 0000:19:00.0: supports D1 D2 [ 28.492173] pci 0000:19:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 28.492470] pci 0000:18:00.0: PCI bridge to [bus 19] [ 28.492491] pci 0000:18:00.0: bridge window [io 0x4000-0x4fff] [ 28.492521] pci 0000:18:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 28.492797] pci 0000:1a:00.0: [11ab:6121] type 00 class 0x01018f [ 28.492855] pci 0000:1a:00.0: reg 10: [io 0x8000-0x8007] [ 28.492895] pci 0000:1a:00.0: reg 14: [io 0x8040-0x8043] [ 28.492936] pci 0000:1a:00.0: reg 18: [io 0x8200-0x8207] [ 28.492975] pci 0000:1a:00.0: reg 1c: [io 0x8800-0x8803] [ 28.493016] pci 0000:1a:00.0: reg 20: [io 0x900000-0x90000f] [ 28.493056] pci 0000:1a:00.0: reg 24: [mem 0x00800000-0x008003ff] [ 28.493335] pci 0000:1a:00.0: supports D1 [ 28.493338] pci 0000:1a:00.0: PME# supported from D0 D1 D3hot [ 28.495931] pci 0000:18:01.0: PCI bridge to [bus 1a] [ 28.495957] pci 0000:18:01.0: bridge window [io 0x3000-0x3fff] [ 28.495971] pci 0000:18:01.0: bridge window [mem 0xc0100000-0xc01fffff] [ 28.498611] pci 0000:1b:00.0: [1033:0194] type 00 class 0x0c0330 [ 28.498697] pci 0000:1b:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit] [ 28.499200] pci 0000:1b:00.0: PME# supported from D0 D3hot D3cold [ 28.501787] pci 0000:18:02.0: PCI bridge to [bus 1b] [ 28.501823] pci 0000:18:02.0: bridge window [mem 0xc0000000-0xc00fffff] [ 28.502117] pci 0000:18:03.0: PCI bridge to [bus 1c] [ 28.502423] pci 0000:18:04.0: PCI bridge to [bus 1d] [ 28.503063] pci 0000:08:00.0: BAR 15: can't assign mem pref (size 0x28000000) [ 28.503067] pci 0000:08:00.0: BAR 14: assigned [mem 0xb0000000-0xc06fffff] [ 28.503071] pci 0000:08:00.0: BAR 13: can't assign io (size 0xb000) [ 28.503078] pci 0000:0a:04.0: BAR 15: can't assign mem pref (size 0x20000000) [ 28.503082] pci 0000:0a:00.0: BAR 14: assigned [mem 0xb0000000-0xb01fffff] [ 28.503085] pci 0000:0a:00.0: BAR 15: assigned [mem 0xb0200000-0xb03fffff 64bit pref] [ 28.503089] pci 0000:0a:03.0: BAR 14: assigned [mem 0xb0400000-0xb05fffff] [ 28.503092] pci 0000:0a:03.0: BAR 15: assigned [mem 0xb0600000-0xb07fffff 64bit pref] [ 28.503107] pci 0000:0a:04.0: BAR 14: can't assign mem (size 0x10300000) [ 28.503110] pci 0000:0a:00.0: BAR 13: can't assign io (size 0x1000) [ 28.503112] pci 0000:0a:03.0: BAR 13: can't assign io (size 0x1000) [ 28.503115] pci 0000:0a:04.0: BAR 13: can't assign io (size 0x8000) [ 28.503120] pci 0000:0a:00.0: PCI bridge to [bus 0b] [ 28.503133] pci 0000:0a:00.0: bridge window [mem 0xb0000000-0xb01fffff] [ 28.503140] pci 0000:0a:00.0: bridge window [mem 0xb0200000-0xb03fffff 64bit pref] [ 28.503152] pci 0000:0a:03.0: PCI bridge to [bus 0c] [ 28.503162] pci 0000:0a:03.0: bridge window [mem 0xb0400000-0xb05fffff] [ 28.503169] pci 0000:0a:03.0: bridge window [mem 0xb0600000-0xb07fffff 64bit pref] [ 28.503184] pci 0000:14:00.0: BAR 15: can't assign mem pref (size 0x20000000) [ 28.503187] pci 0000:14:00.0: BAR 14: can't assign mem (size 0x10300000) [ 28.503190] pci 0000:14:00.0: BAR 13: can't assign io (size 0x7000) [ 28.503196] pci 0000:15:03.0: BAR 15: can't assign mem pref (size 0x18000000) [ 28.503201] pci 0000:15:03.0: BAR 14: can't assign mem (size 0x200000) [ 28.503205] pci 0000:15:04.0: BAR 14: can't assign mem (size 0xa00000) [ 28.503209] pci 0000:15:04.0: BAR 15: can't assign mem pref (size 0xa00000) [ 28.503212] pci 0000:15:03.0: BAR 13: can't assign io (size 0x1000) [ 28.503215] pci 0000:15:04.0: BAR 13: can't assign io (size 0x6000) [ 28.503222] pci 0000:16:00.0: BAR 0: can't assign mem pref (size 0x10000000) [ 28.503225] pci 0000:16:00.0: BAR 2: can't assign mem (size 0x20000) [ 28.503228] pci 0000:16:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 28.503231] pci 0000:16:00.1: BAR 0: can't assign mem (size 0x4000) [ 28.503236] pci 0000:16:00.0: BAR 4: can't assign io (size 0x100) [ 28.503241] pci 0000:15:03.0: PCI bridge to [bus 16] [ 28.503278] pci 0000:17:00.0: BAR 14: can't assign mem (size 0xa00000) [ 28.503283] pci 0000:17:00.0: BAR 15: can't assign mem pref (size 0xa00000) [ 28.503286] pci 0000:17:00.0: BAR 13: can't assign io (size 0x5000) [ 28.503295] pci 0000:18:00.0: BAR 14: can't assign mem (size 0x200000) [ 28.503298] pci 0000:18:00.0: BAR 15: can't assign mem pref (size 0x200000) [ 28.503301] pci 0000:18:01.0: BAR 14: can't assign mem (size 0x200000) [ 28.503304] pci 0000:18:01.0: BAR 15: can't assign mem pref (size 0x200000) [ 28.503306] pci 0000:18:02.0: BAR 14: can't assign mem (size 0x200000) [ 28.503309] pci 0000:18:02.0: BAR 15: can't assign mem pref (size 0x200000) [ 28.503312] pci 0000:18:03.0: BAR 14: can't assign mem (size 0x200000) [ 28.503314] pci 0000:18:03.0: BAR 15: can't assign mem pref (size 0x200000) [ 28.503317] pci 0000:18:04.0: BAR 14: can't assign mem (size 0x200000) [ 28.503320] pci 0000:18:04.0: BAR 15: can't assign mem pref (size 0x200000) [ 28.503323] pci 0000:18:00.0: BAR 13: can't assign io (size 0x1000) [ 28.503325] pci 0000:18:01.0: BAR 13: can't assign io (size 0x1000) [ 28.503328] pci 0000:18:02.0: BAR 13: can't assign io (size 0x1000) [ 28.503331] pci 0000:18:03.0: BAR 13: can't assign io (size 0x1000) [ 28.503333] pci 0000:18:04.0: BAR 13: can't assign io (size 0x1000) [ 28.503340] pci 0000:19:00.0: BAR 4: can't assign mem pref (size 0x4000) [ 28.503343] pci 0000:19:00.0: BAR 2: can't assign mem pref (size 0x1000) [ 28.503346] pci 0000:19:00.0: BAR 0: can't assign io (size 0x100) [ 28.503350] pci 0000:18:00.0: PCI bridge to [bus 19] [ 28.503401] pci 0000:1a:00.0: BAR 5: can't assign mem (size 0x400) [ 28.503404] pci 0000:1a:00.0: BAR 4: can't assign io (size 0x10) [ 28.503407] pci 0000:1a:00.0: BAR 0: can't assign io (size 0x8) [ 28.503409] pci 0000:1a:00.0: BAR 2: can't assign io (size 0x8) [ 28.503412] pci 0000:1a:00.0: BAR 1: can't assign io (size 0x4) [ 28.503415] pci 0000:1a:00.0: BAR 3: can't assign io (size 0x4) [ 28.503419] pci 0000:18:01.0: PCI bridge to [bus 1a] [ 28.503468] pci 0000:1b:00.0: BAR 0: can't assign mem (size 0x2000) [ 28.503472] pci 0000:18:02.0: PCI bridge to [bus 1b] [ 28.503520] pci 0000:18:03.0: PCI bridge to [bus 1c] [ 28.503568] pci 0000:18:04.0: PCI bridge to [bus 1d] [ 28.503617] pci 0000:17:00.0: PCI bridge to [bus 18-1d] [ 28.503691] pci 0000:15:04.0: PCI bridge to [bus 17-1d] [ 28.503727] pci 0000:14:00.0: PCI bridge to [bus 15-1d] [ 28.503760] pci 0000:0a:04.0: PCI bridge to [bus 14-1d] [ 28.503782] pci 0000:08:00.0: PCI bridge to [bus 0a-1d] [ 28.503792] pci 0000:08:00.0: bridge window [mem 0xb0000000-0xc06fffff] [ 28.503825] pci 0000:08:00.0: no hotplug settings from platform [ 28.503842] pci 0000:0a:00.0: no hotplug settings from platform [ 28.503858] pci 0000:0a:03.0: no hotplug settings from platform [ 28.503874] pci 0000:0a:04.0: no hotplug settings from platform [ 28.503895] pci 0000:14:00.0: no hotplug settings from platform [ 28.503920] pci 0000:15:03.0: no hotplug settings from platform [ 28.503949] pci 0000:16:00.0: no hotplug settings from platform [ 28.503978] pci 0000:16:00.1: no hotplug settings from platform [ 28.504004] pci 0000:15:04.0: no hotplug settings from platform [ 28.504034] pci 0000:17:00.0: no hotplug settings from platform [ 28.504068] pci 0000:18:00.0: no hotplug settings from platform [ 28.504119] pci 0000:19:00.0: no hotplug settings from platform [ 28.504152] pci 0000:18:01.0: no hotplug settings from platform [ 28.504190] pci 0000:1a:00.0: no hotplug settings from platform [ 28.504224] pci 0000:18:02.0: no hotplug settings from platform [ 28.504263] pci 0000:1b:00.0: no hotplug settings from platform [ 28.504299] pci 0000:18:03.0: no hotplug settings from platform [ 28.504334] pci 0000:18:04.0: no hotplug settings from platform [ 28.505548] pcieport 0000:08:00.0: irq 52 for MSI/MSI-X [ 28.506257] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:0a:00 [ 28.507996] acpiphp: Slot [1-1] registered [ 28.508042] acpiphp_glue: found ACPI PCI Hotplug slot 2 at PCI 0000:0a:03 [ 28.508067] acpiphp: Slot [2] registered [ 28.508090] acpiphp_glue: found ACPI PCI Hotplug slot 3 at PCI 0000:0a:04 [ 28.508170] acpiphp: Slot [3] registered [ 28.508395] pcieport 0000:0a:00.0: irq 53 for MSI/MSI-X [ 28.508694] pcieport 0000:0a:03.0: irq 54 for MSI/MSI-X [ 28.509877] pcieport 0000:0a:04.0: irq 55 for MSI/MSI-X [ 28.510233] pcieport 0000:14:00.0: irq 56 for MSI/MSI-X [ 28.511514] pcieport 0000:15:03.0: irq 57 for MSI/MSI-X [ 28.512879] pcieport 0000:15:04.0: irq 58 for MSI/MSI-X [ 28.513464] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:16:00 [ 28.514698] acpiphp: Slot [1-2] registered [ 28.514745] acpiphp_glue: sibling found, but _SUN doesn't match! [ 28.515205] hda-intel 0000:16:00.1: Handle VGA-switcheroo audio client [ 28.515241] ------------[ cut here ]------------ [ 28.515249] WARNING: at drivers/pci/pci.c:130 pci_ioremap_bar+0x69/0x70() [ 28.515251] Modules linked in: pata_acpi pata_marvell fuse zram(C) rfcomm bnep rtsx_pci_sdmmc rtsx_pci_ms memstick mmc_core iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm joydev qcserial usb_wwan usbserial uvcvideo pcspkr btusb videobuf2_vmalloc arc4 videobuf2_memops videobuf2_core videodev bluetooth media iwldvm mac80211 iwlwifi r8169 rtsx_pci mii cfg80211 snd_hda_codec_hdmi snd_hda_codec_realtek sony_laptop i915 snd_hda_intel snd_hda_codec rfkill snd_hwdep intel_agp intel_gtt snd_pcm snd_page_alloc i2c_algo_bit drm_kms_helper drm snd_timer lpc_ich agpgart snd mfd_core i2c_i801 sha256_ssse3 sha256_generic dm_crypt raid0 md_mod crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd xhci_hcd ehci_pci ehci_hcd dm_mirror dm_region_hash dm_log [ 28.515331] dm_mod [last unloaded: microcode] [ 28.515336] CPU: 0 PID: 40 Comm: kworker/0:1 Tainted: G C 3.10.0-rc5 #2 [ 28.515338] Hardware name: Sony Corporation VPCZ23A4R/VAIO, BIOS R1013H5 05/21/2012 [ 28.515343] Workqueue: kacpi_hotplug acpi_os_execute_deferred [ 28.515346] ffffffff81a2a334 ffff880253d3f7a8 ffffffff8165abf8 ffff880253d3f7e8 [ 28.515351] ffffffff8103c8cb ffff880253d3f7c8 ffff88023263e000 ffff880252c7b000 [ 28.515357] 0000000000000000 ffff88023263d800 0000000000000001 ffff880253d3f7f8 [ 28.515362] Call Trace: [ 28.515368] [] dump_stack+0x19/0x1b [ 28.515373] [] warn_slowpath_common+0x6b/0xa0 [ 28.515377] [] warn_slowpath_null+0x15/0x20 [ 28.515381] [] pci_ioremap_bar+0x69/0x70 [ 28.515388] [] azx_first_init+0x56/0x600 [snd_hda_intel] [ 28.515392] [] ? pci_get_domain_bus_and_slot+0x2f/0x70 [ 28.515398] [] azx_probe+0x555/0x940 [snd_hda_intel] [ 28.515403] [] ? trace_hardirqs_on+0xd/0x10 [ 28.515407] [] local_pci_probe+0x46/0x80 [ 28.515411] [] pci_device_probe+0xf9/0x120 [ 28.515418] [] driver_probe_device+0x76/0x220 [ 28.515423] [] __device_attach+0x4b/0x60 [ 28.515427] [] ? __driver_attach+0xb0/0xb0 [ 28.515431] [] bus_for_each_drv+0x5c/0x90 [ 28.515435] [] device_attach+0x98/0xb0 [ 28.515439] [] pci_bus_add_device+0x34/0x60 [ 28.515443] [] pci_bus_add_devices+0x49/0xf0 [ 28.515447] [] pci_bus_add_devices+0x97/0xf0 [ 28.515451] [] pci_bus_add_devices+0x97/0xf0 [ 28.515454] [] pci_bus_add_devices+0x97/0xf0 [ 28.515458] [] pci_bus_add_devices+0x97/0xf0 [ 28.515463] [] enable_device+0x370/0x450 [ 28.515468] [] acpiphp_enable_slot+0xca/0x140 [ 28.515472] [] _handle_hotplug_event_func+0x96/0x1a0 [ 28.515477] [] hotplug_dock_devices+0x67/0xed [ 28.515481] [] ? notifier_call_chain+0x70/0x70 [ 28.515485] [] acpi_dock_deferred_cb+0xd4/0x1c9 [ 28.515489] [] acpi_os_execute_deferred+0x20/0x2d [ 28.515494] [] process_one_work+0x1c2/0x560 [ 28.515498] [] ? process_one_work+0x157/0x560 [ 28.515502] [] worker_thread+0x116/0x370 [ 28.515506] [] ? manage_workers.isra.20+0x2d0/0x2d0 [ 28.515510] [] kthread+0xd6/0xe0 [ 28.515514] [] ? _raw_spin_unlock_irq+0x2b/0x60 [ 28.515519] [] ? __init_kthread_worker+0x70/0x70 [ 28.515523] [] ret_from_fork+0x7c/0xb0 [ 28.515527] [] ? __init_kthread_worker+0x70/0x70 [ 28.515530] ---[ end trace 29626ae1d9eae593 ]--- [ 28.515532] hda-intel 0000:16:00.1: ioremap error [ 28.515948] pcieport 0000:17:00.0: irq 59 for MSI/MSI-X [ 28.516502] pcieport 0000:18:00.0: irq 60 for MSI/MSI-X [ 28.517573] pcieport 0000:18:01.0: irq 61 for MSI/MSI-X [ 28.518551] pcieport 0000:18:02.0: irq 62 for MSI/MSI-X [ 28.518963] pcieport 0000:18:03.0: irq 63 for MSI/MSI-X [ 28.520238] pcieport 0000:18:04.0: irq 64 for MSI/MSI-X [ 28.521195] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:19:00 [ 28.521867] acpiphp: Slot [1-3] registered [ 28.522021] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 28.522156] r8169 0000:19:00.0 (unregistered net_device): region #2 not an MMIO resource, aborting [ 28.522501] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:1a:00 [ 28.522540] acpiphp: Slot [1-4] registered [ 28.522780] pata_marvell 0000:1a:00.0: no available native port [ 28.522997] pata_acpi 0000:1a:00.0: no available native port [ 28.523101] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:1b:00 [ 28.523150] acpiphp: Slot [1-5] registered [ 28.523626] xhci_hcd 0000:1b:00.0: init 0000:1b:00.0 fail, -16 [ 28.523634] xhci_hcd: probe of 0000:1b:00.0 failed with error -16 [ 28.523658] acpiphp_glue: _handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM0 [ 28.523664] acpiphp_glue: _handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM1 [ 28.523669] acpiphp_glue: _handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2 [ 28.523673] acpiphp_glue: _handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR0.GFXA [ 28.523689] acpiphp_glue: _handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR0.GHDA [ 28.523700] acpiphp_glue: _handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR1.LPCI.LPC0.DLAN [ 28.523708] acpiphp_glue: _handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR1.LPCI.LPC1.DODD [ 28.523715] acpiphp_glue: _handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB.LPM2.LPRI.LPR1.LPCI.LPC2.DUSB