[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.0-rc5-rafael (root@aep-vaio) (gcc version 4.6.3 (Gentoo 4.6.3 p1.11, pie-0.5.2) ) #1 SMP PREEMPT Fri Jun 14 22:46:04 YEKT 2013 [ 0.000000] Command line: root=/dev/vaio/gentoo64a-root rd.luks.uuid=luks-54ed2bf3-fb3d-4442-b8be-2f0cfda6a521 acpiphp.debug=1 initrd=/boot/initramfs.img.bisect BOOT_IMAGE=/boot/vmlinuz.bisect [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ae3efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009ae3f000-0x000000009aebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Sony Corporation VPCZ23A4R/VAIO, BIOS R1013H5 05/21/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 09B000000 mask FFF000000 uncachable [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 240000000 mask FF0000000 write-back [ 0.000000] 8 base 250000000 mask FF0000000 write-back [ 0.000000] 9 base 25FE00000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x026ba000, 0x026bafff] PGTABLE [ 0.000000] BRK [0x026bb000, 0x026bbfff] PGTABLE [ 0.000000] BRK [0x026bc000, 0x026bcfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25fc00000-0x25fdfffff] [ 0.000000] [mem 0x25fc00000-0x25fdfffff] page 2M [ 0.000000] BRK [0x026bd000, 0x026bdfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25fbfffff] [ 0.000000] [mem 0x25c000000-0x25fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff] [ 0.000000] [mem 0x200000000-0x25bffffff] page 2M [ 0.000000] BRK [0x026be000, 0x026befff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9ae3efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x9adfffff] page 2M [ 0.000000] [mem 0x9ae00000-0x9ae3efff] page 4k [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff] [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x7fac3000-0x7fffefff] [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 Sony) [ 0.000000] ACPI: XSDT 000000009affe120 00094 (v01 Sony VAIO 20120521 01000013) [ 0.000000] ACPI: FACP 000000009affc000 000F4 (v04 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: DSDT 000000009aff0000 08607 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: FACS 000000009af6e000 00040 [ 0.000000] ACPI: ASF! 000000009affd000 000A5 (v32 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: HPET 000000009affb000 00038 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: APIC 000000009affa000 0008C (v02 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: MCFG 000000009aff9000 0003C (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: SLIC 000000009afef000 00176 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: WDAT 000000009afee000 00224 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afed000 00CA6 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: BOOT 000000009afeb000 00028 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe9000 0022B (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: ASPT 000000009afe6000 00034 (v07 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe5000 00846 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe4000 00996 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: SSDT 000000009afe3000 00EE8 (v01 Sony VAIO 20120521 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25fdfffff] [ 0.000000] NODE_DATA [mem 0x25fdf4000-0x25fdf8fff] [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257400000-ffff88025f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x25fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0008efff] [ 0.000000] node 0: [mem 0x00100000-0x9ae3efff] [ 0.000000] node 0: [mem 0x9afff000-0x9affffff] [ 0.000000] node 0: [mem 0x100000000-0x25fdfffff] [ 0.000000] On node 0 totalpages: 2075598 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 142 pages reserved [ 0.000000] DMA zone: 3982 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9849 pages used for memmap [ 0.000000] DMA32 zone: 630336 pages, LIFO batch:31 [ 0.000000] Normal zone: 22520 pages used for memmap [ 0.000000] Normal zone: 1441280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000 [ 0.000000] PM: Registered nosave memory: 0000000000090000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000009ae3f000 - 000000009aebf000 [ 0.000000] PM: Registered nosave memory: 000000009aebf000 - 000000009afbf000 [ 0.000000] PM: Registered nosave memory: 000000009afbf000 - 000000009afff000 [ 0.000000] PM: Registered nosave memory: 000000009b000000 - 000000009fa00000 [ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025fa00000 s83904 r8192 d22592 u262144 [ 0.000000] pcpu-alloc: s83904 r8192 d22592 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2043023 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/vaio/gentoo64a-root rd.luks.uuid=luks-54ed2bf3-fb3d-4442-b8be-2f0cfda6a521 acpiphp.debug=1 initrd=/boot/initramfs.img.bisect BOOT_IMAGE=/boot/vmlinuz.bisect [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8074252k/9959424k available (6576k kernel code, 1657032k absent, 228140k reserved, 6466k data, 980k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5855 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] kmemleak: Kernel memory leak detector disabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2793.681 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.36 BogoMIPS (lpj=2793681) [ 0.000123] pid_max: default: 32768 minimum: 301 [ 0.000240] Security Framework initialized [ 0.000824] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002404] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003106] Mount-cache hash table entries: 256 [ 0.003770] Initializing cgroup subsys memory [ 0.003850] Initializing cgroup subsys devices [ 0.003934] Initializing cgroup subsys freezer [ 0.004485] Initializing cgroup subsys blkio [ 0.004543] Initializing cgroup subsys net_prio [ 0.004602] Initializing cgroup subsys hugetlb [ 0.004704] CPU: Physical Processor ID: 0 [ 0.004762] CPU: Processor Core ID: 0 [ 0.004821] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.004917] mce: CPU supports 7 MCE banks [ 0.004983] CPU0: Thermal monitoring enabled (TM1) [ 0.005053] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 5 [ 0.005316] Freeing SMP alternatives: 24k freed [ 0.005381] ACPI: Core revision 20130328 [ 0.016551] ACPI: All ACPI Tables successfully acquired [ 0.028796] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.038872] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (fam: 06, model: 2a, stepping: 07) [ 0.039077] TSC deadline timer enabled [ 0.039091] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.039328] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.039410] ... version: 3 [ 0.039468] ... bit width: 48 [ 0.039526] ... generic registers: 4 [ 0.039583] ... value mask: 0000ffffffffffff [ 0.039643] ... max period: 000000007fffffff [ 0.039702] ... fixed-purpose events: 3 [ 0.039760] ... event mask: 000000070000000f [ 0.049455] SMP alternatives: lockdep: fixing up alternatives [ 0.063007] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.049534] smpboot: Booting Node 0, Processors #1 [ 0.064942] SMP alternatives: lockdep: fixing up alternatives [ 0.065054] #2 [ 0.080505] SMP alternatives: lockdep: fixing up alternatives [ 0.080620] #3 [ 0.093944] Brought up 4 CPUs [ 0.094053] smpboot: Total of 4 processors activated (22349.44 BogoMIPS) [ 0.097680] devtmpfs: initialized [ 0.100259] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes) [ 0.100594] xor: automatically using best checksumming function: [ 0.110038] avx : 20480.000 MB/sec [ 0.110274] NET: Registered protocol family 16 [ 0.110693] ACPI: bus type PCI registered [ 0.110752] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.110885] dca service started, version 1.12.1 [ 0.111003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.111088] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.133640] PCI: Using configuration type 1 for base access [ 0.135746] bio: create slab at 0 [ 0.152215] raid6: sse2x1 7582 MB/s [ 0.169264] raid6: sse2x2 9378 MB/s [ 0.186315] raid6: sse2x4 10820 MB/s [ 0.186374] raid6: using algorithm sse2x4 (10820 MB/s) [ 0.186434] raid6: using ssse3x2 recovery algorithm [ 0.186569] ACPI: Added _OSI(Module Device) [ 0.186628] ACPI: Added _OSI(Processor Device) [ 0.186687] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.186747] ACPI: Added _OSI(Processor Aggregator Device) [ 0.191384] ACPI: EC: Look up EC in DSDT [ 0.195887] ACPI: Executed 1 blocks of module-level executable AML code [ 0.204544] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.212409] ACPI: SSDT 000000009ae70718 0067C (v01 Sony VAIO 20120521 INTL 20100121) [ 0.213729] ACPI: Dynamic OEM Table Load: [ 0.213865] ACPI: SSDT (null) 0067C (v01 Sony VAIO 20120521 INTL 20100121) [ 0.218783] ACPI: SSDT 000000009ae71a98 00303 (v01 Sony VAIO 20120521 INTL 20100121) [ 0.220164] ACPI: Dynamic OEM Table Load: [ 0.220300] ACPI: SSDT (null) 00303 (v01 Sony VAIO 20120521 INTL 20100121) [ 0.223695] ACPI: SSDT 000000009ae6fd98 00119 (v01 Sony VAIO 20120521 INTL 20100121) [ 0.225019] ACPI: Dynamic OEM Table Load: [ 0.225155] ACPI: SSDT (null) 00119 (v01 Sony VAIO 20120521 INTL 20100121) [ 0.636793] ACPI: Interpreter enabled [ 0.636856] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.637017] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.637205] ACPI: (supports S0 S3 S4 S5) [ 0.637264] ACPI: Using IOAPIC for interrupt routing [ 0.637357] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.638381] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.656417] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.656595] \_SB_.PCI0:_OSC invalid UUID [ 0.656597] _OSC request data:1 8 0 [ 0.657641] PCI host bridge to bus 0000:00 [ 0.657702] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.657763] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.657826] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.657889] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.657952] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] [ 0.658049] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.658258] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 0.658274] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit] [ 0.658282] pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.658289] pci 0000:00:02.0: reg 20: [io 0xa000-0xa03f] [ 0.658478] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.658517] pci 0000:00:16.0: reg 10: [mem 0xd9404000-0xd940400f 64bit] [ 0.658650] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.658830] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.659124] pci 0000:00:1a.0: reg 10: [mem 0xd9409000-0xd94093ff] [ 0.660827] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.660921] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.661095] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.661124] pci 0000:00:1b.0: reg 10: [mem 0xd9400000-0xd9403fff 64bit] [ 0.661264] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.661318] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.661440] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.661582] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.661642] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.661765] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.661910] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.661973] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.662092] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.662233] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.662297] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.662415] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.662556] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.662623] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.662747] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400 [ 0.662898] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.662971] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 0.663103] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.663398] pci 0000:00:1d.0: reg 10: [mem 0xd9408000-0xd94083ff] [ 0.665110] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.665176] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.665296] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100 [ 0.665537] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400 [ 0.665575] pci 0000:00:1f.2: reg 10: [io 0xa088-0xa08f] [ 0.665591] pci 0000:00:1f.2: reg 14: [io 0xa094-0xa097] [ 0.665605] pci 0000:00:1f.2: reg 18: [io 0xa080-0xa087] [ 0.665620] pci 0000:00:1f.2: reg 1c: [io 0xa090-0xa093] [ 0.665635] pci 0000:00:1f.2: reg 20: [io 0xa060-0xa07f] [ 0.665650] pci 0000:00:1f.2: reg 24: [mem 0xd9407000-0xd94077ff] [ 0.665748] pci 0000:00:1f.2: PME# supported from D3hot [ 0.665863] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.665891] pci 0000:00:1f.3: reg 10: [mem 0xd9405000-0xd94050ff 64bit] [ 0.665937] pci 0000:00:1f.3: reg 20: [io 0xa040-0xa05f] [ 0.666491] pci 0000:02:00.0: [8086:0091] type 00 class 0x028000 [ 0.666815] pci 0000:02:00.0: reg 10: [mem 0xd8400000-0xd8401fff 64bit] [ 0.668322] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.668498] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.670137] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.670202] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.670208] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff] [ 0.670218] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.670370] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.670399] pci 0000:03:00.0: reg 10: [mem 0xd7400000-0xd7400fff] [ 0.670606] pci 0000:03:00.0: supports D1 D2 [ 0.670607] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.670659] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.672013] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.672104] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff] [ 0.672110] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff] [ 0.672120] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.672323] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.672360] pci 0000:04:00.0: reg 10: [mem 0xd6400000-0xd6401fff 64bit] [ 0.672568] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.672627] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.672767] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.672831] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff] [ 0.672837] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff] [ 0.672846] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref] [ 0.673056] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.673131] pci 0000:05:00.0: reg 10: [io 0x6000-0x60ff] [ 0.673266] pci 0000:05:00.0: reg 18: [mem 0xd3404000-0xd3404fff 64bit pref] [ 0.673348] pci 0000:05:00.0: reg 20: [mem 0xd3400000-0xd3403fff 64bit pref] [ 0.673715] pci 0000:05:00.0: supports D1 D2 [ 0.673717] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.673853] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.676069] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.676149] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.676155] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff] [ 0.676164] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref] [ 0.676318] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:08:00 [ 0.676438] acpiphp: Slot [1] registered [ 0.676549] pci 0000:00:1c.6: PCI bridge to [bus 08-20] [ 0.676614] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff] [ 0.676620] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff] [ 0.676630] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref] [ 0.676738] \_SB_.PCI0:_OSC invalid UUID [ 0.676739] _OSC request data:1 1f 0 [ 0.676743] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.676820] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.678582] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.679270] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.679899] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.680529] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.681158] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.681834] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.682555] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.683184] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.684584] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.684727] acpi root: \_SB_.PCI0 notify handler is installed [ 0.684876] Found 1 acpi root devices [ 0.685004] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.685404] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.685487] vgaarb: loaded [ 0.685542] vgaarb: bridge control possible 0000:00:02.0 [ 0.685678] SCSI subsystem initialized [ 0.685737] ACPI: bus type ATA registered [ 0.685878] libata version 3.00 loaded. [ 0.685892] ACPI: bus type USB registered [ 0.685975] usbcore: registered new interface driver usbfs [ 0.686049] usbcore: registered new interface driver hub [ 0.686144] usbcore: registered new device driver usb [ 0.686249] PCI: Using ACPI for IRQ routing [ 0.694351] PCI: pci_cache_line_size set to 64 bytes [ 0.694539] e820: reserve RAM buffer [mem 0x0008f400-0x0008ffff] [ 0.694547] e820: reserve RAM buffer [mem 0x9ae3f000-0x9bffffff] [ 0.694549] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff] [ 0.694551] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff] [ 0.694900] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.695320] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.697404] Switching to clocksource hpet [ 0.704037] pnp: PnP ACPI init [ 0.704123] ACPI: bus type PNP registered [ 0.704293] pnp 00:00: [dma 4] [ 0.704348] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.704386] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.704508] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.704561] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.704636] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.704699] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.704761] system 00:04: [io 0xffff] has been reserved [ 0.704822] system 00:04: [io 0xffff] has been reserved [ 0.704884] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.704946] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.705007] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.705069] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.705131] system 00:04: [io 0x2000] has been reserved [ 0.705192] system 00:04: [io 0x2004] has been reserved [ 0.705255] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.705299] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.705364] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.705428] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.705479] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.705538] pnp 00:08: Plug and Play ACPI device, IDs SNY9015 PNP0f13 (active) [ 0.705727] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.705792] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.705855] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.705919] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.705982] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.706045] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.706109] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.706173] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.706239] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.706303] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.706368] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.707160] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved [ 0.707231] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved [ 0.707302] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.707323] pnp: PnP ACPI: found 11 devices [ 0.707382] ACPI: bus type PNP unregistered [ 0.715692] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.715757] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.715825] pci 0000:00:1c.0: bridge window [mem 0xd8400000-0xd93fffff] [ 0.715892] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.715975] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.716036] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff] [ 0.716104] pci 0000:00:1c.1: bridge window [mem 0xd7400000-0xd83fffff] [ 0.716659] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.716743] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.716805] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff] [ 0.716873] pci 0000:00:1c.2: bridge window [mem 0xd6400000-0xd73fffff] [ 0.716940] pci 0000:00:1c.2: bridge window [mem 0xd2400000-0xd33fffff 64bit pref] [ 0.717024] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.717085] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff] [ 0.717152] pci 0000:00:1c.3: bridge window [mem 0xd5400000-0xd63fffff] [ 0.717218] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd43fffff 64bit pref] [ 0.717301] pci 0000:00:1c.6: PCI bridge to [bus 08-20] [ 0.717364] pci 0000:00:1c.6: bridge window [io 0x3000-0x5fff] [ 0.717432] pci 0000:00:1c.6: bridge window [mem 0xb0000000-0xcfffffff] [ 0.717499] pci 0000:00:1c.6: bridge window [mem 0xd4400000-0xd53fffff 64bit pref] [ 0.718011] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.718013] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.718015] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.718017] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.718019] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.718020] pci_bus 0000:02: resource 1 [mem 0xd8400000-0xd93fffff] [ 0.718022] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref] [ 0.718024] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] [ 0.718026] pci_bus 0000:03: resource 1 [mem 0xd7400000-0xd83fffff] [ 0.718027] pci_bus 0000:03: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref] [ 0.718029] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff] [ 0.718031] pci_bus 0000:04: resource 1 [mem 0xd6400000-0xd73fffff] [ 0.718032] pci_bus 0000:04: resource 2 [mem 0xd2400000-0xd33fffff 64bit pref] [ 0.718034] pci_bus 0000:05: resource 0 [io 0x6000-0x6fff] [ 0.718036] pci_bus 0000:05: resource 1 [mem 0xd5400000-0xd63fffff] [ 0.718037] pci_bus 0000:05: resource 2 [mem 0xd3400000-0xd43fffff 64bit pref] [ 0.718039] pci_bus 0000:08: resource 0 [io 0x3000-0x5fff] [ 0.718041] pci_bus 0000:08: resource 1 [mem 0xb0000000-0xcfffffff] [ 0.718043] pci_bus 0000:08: resource 2 [mem 0xd4400000-0xd53fffff 64bit pref] [ 0.718089] NET: Registered protocol family 2 [ 0.718605] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.719082] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 0.722572] TCP: Hash tables configured (established 65536 bind 65536) [ 0.722689] TCP: reno registered [ 0.722794] UDP hash table entries: 4096 (order: 7, 655360 bytes) [ 0.723338] UDP-Lite hash table entries: 4096 (order: 7, 655360 bytes) [ 0.724049] NET: Registered protocol family 1 [ 0.724123] pci 0000:00:02.0: Boot video device [ 0.758061] PCI: CLS 64 bytes, default 64 [ 0.758218] Unpacking initramfs... [ 0.843018] Freeing initrd memory: 5360k freed [ 0.843798] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.843866] software IO TLB [mem 0x96e3f000-0x9ae3f000] (64MB) mapped at [ffff880096e3f000-ffff88009ae3efff] [ 0.843979] Simple Boot Flag at 0x44 set to 0x1 [ 0.844647] audit: initializing netlink socket (disabled) [ 0.844755] type=2000 audit(1371228900.822:1): initialized [ 0.865363] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.868000] VFS: Disk quotas dquot_6.5.2 [ 0.868112] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.868767] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.869134] NILFS version 2 loaded [ 0.869386] bio: create slab at 1 [ 0.869722] Btrfs loaded [ 0.869784] msgmni has been set to 15780 [ 0.870480] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.870568] io scheduler noop registered [ 0.870626] io scheduler deadline registered [ 0.870764] io scheduler cfq registered (default) [ 0.871328] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.871472] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.871534] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 [ 0.871617] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 0.871692] cpcihp_generic: not configured, disabling. [ 0.871788] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.874468] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed [ 0.874976] intel_idle: MWAIT substates: 0x21120 [ 0.874978] intel_idle: v0.4 model 0x2A [ 0.874979] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.875138] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.875385] ACPI: AC Adapter [ADP1] (off-line) [ 0.875678] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.875806] ACPI: Lid Switch [LID0] [ 0.875912] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.876019] ACPI: Power Button [PWRB] [ 0.876182] ACPI: Requesting acpi_cpufreq [ 0.883717] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.883799] ACPI: Thermal Zone [TZ01] (64 C) [ 0.883981] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 0.884163] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.888909] loop: module loaded [ 0.889346] mei_me 0000:00:16.0: setting latency timer to 64 [ 0.889466] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 0.890358] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.890449] ACPI: Battery Slot [BAT1] (battery present) [ 0.890622] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.890710] ACPI: Battery Slot [BAT2] (battery absent) [ 0.895097] Loading iSCSI transport class v2.0-870. [ 0.895300] iscsi: registered transport (tcp) [ 0.895426] ahci 0000:00:1f.2: version 3.0 [ 0.895602] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.895680] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl RAID mode [ 0.895769] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part apst [ 0.895848] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.896842] scsi0 : ahci [ 0.897119] scsi1 : ahci [ 0.897275] scsi2 : ahci [ 0.897436] scsi3 : ahci [ 0.897593] scsi4 : ahci [ 0.897752] scsi5 : ahci [ 0.897868] ata1: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407100 irq 41 [ 0.897945] ata2: SATA max UDMA/133 abar m2048@0xd9407000 port 0xd9407180 irq 41 [ 0.898020] ata3: DUMMY [ 0.898074] ata4: DUMMY [ 0.898147] ata5: DUMMY [ 0.898202] ata6: DUMMY [ 0.898471] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.901277] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.901530] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.901790] mousedev: PS/2 mouse device common for all mice [ 0.902308] rtc_cmos 00:05: RTC can wake from S4 [ 0.902614] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.902711] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.902858] Intel P-state driver initializing. [ 0.902937] Intel pstate controlling: cpu 0 [ 0.903073] Intel pstate controlling: cpu 1 [ 0.903151] Intel pstate controlling: cpu 2 [ 0.903227] Intel pstate controlling: cpu 3 [ 0.903513] cpuidle: using governor ladder [ 0.904053] cpuidle: using governor menu [ 0.904117] ledtrig-cpu: registered to indicate activity on CPUs [ 0.904194] hidraw: raw HID events driver (C) Jiri Kosina [ 0.904490] TCP: cubic registered [ 0.904549] Initializing XFRM netlink socket [ 0.904778] NET: Registered protocol family 10 [ 0.905265] NET: Registered protocol family 17 [ 0.905405] Key type dns_resolver registered [ 0.905888] PM: Hibernation image not present or could not be loaded. [ 0.905909] registered taskstats version 1 [ 0.907132] rtc_cmos 00:05: setting system clock to 2013-06-14 16:55:01 UTC (1371228901) [ 0.921175] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.203290] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.203430] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.204240] ata2.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM05S1Q, max UDMA/133 [ 1.204345] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.204453] ata1.00: ATA-8: SAMSUNG MZRPC256HADR-000SO, CXM05S1Q, max UDMA/133 [ 1.204564] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.205102] ata1.00: configured for UDMA/133 [ 1.205300] ata2.00: configured for UDMA/133 [ 1.206248] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5 [ 1.207255] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.207681] sd 0:0:0:0: [sda] Write Protect is off [ 1.207750] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.207814] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.207843] scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZRPC256 CXM0 PQ: 0 ANSI: 5 [ 1.208061] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.208359] sd 1:0:0:0: [sdb] Write Protect is off [ 1.208429] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.208497] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.209317] sda: sda1 sda2 [ 1.209319] sdb: unknown partition table [ 1.209885] sda: p2 size 489641984 extends beyond EOD, enabling native capacity [ 1.210414] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.211395] sda: sda1 sda2 [ 1.211652] sda: p2 size 489641984 extends beyond EOD, truncated [ 1.212312] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.213331] Freeing unused kernel memory: 980k freed [ 1.213503] Write protecting the kernel read-only data: 12288k [ 1.216744] Freeing unused kernel memory: 1604k freed [ 1.219247] Freeing unused kernel memory: 1256k freed [ 1.246686] dracut: dracut-027-r3 [ 1.269853] device-mapper: uevent: version 1.0.3 [ 1.270037] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 1.274051] systemd-udevd[168]: starting version 204 [ 1.337371] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.337627] ehci-pci: EHCI PCI platform driver [ 1.337877] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 1.337958] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.338250] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.338520] ehci-pci 0000:00:1a.0: debug port 2 [ 1.342571] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.342620] ehci-pci 0000:00:1a.0: irq 23, io mem 0xd9409000 [ 1.348367] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.350622] hub 1-0:1.0: USB hub found [ 1.350735] hub 1-0:1.0: 2 ports detected [ 1.351421] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.351509] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 [ 1.351541] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 1.351866] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X [ 1.351877] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 1.351888] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.351899] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 1.351909] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 1.352628] xHCI xhci_add_endpoint called for root hub [ 1.352632] xHCI xhci_check_bandwidth called for root hub [ 1.352784] hub 2-0:1.0: USB hub found [ 1.352900] hub 2-0:1.0: 2 ports detected [ 1.354454] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.354470] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.354484] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 1.354514] ehci-pci 0000:00:1d.0: debug port 2 [ 1.354857] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 1.357416] xHCI xhci_add_endpoint called for root hub [ 1.357418] xHCI xhci_check_bandwidth called for root hub [ 1.357684] hub 4-0:1.0: USB hub found [ 1.357786] hub 4-0:1.0: 2 ports detected [ 1.358429] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.358462] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd9408000 [ 1.364350] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.365795] hub 3-0:1.0: USB hub found [ 1.365857] hub 3-0:1.0: 2 ports detected [ 1.385053] md: bind [ 1.595746] md: bind [ 1.605515] md: bind [ 1.605940] md: bind [ 1.608001] md: raid0 personality registered for level 0 [ 1.608491] md/raid0:md126: md_size is 500129792 sectors. [ 1.608553] md: RAID0 configuration for md126 - 1 zone [ 1.608613] md: zone0=[sda/sdb] [ 1.608844] zone-offset= 0KB, device-offset= 0KB, size= 250065152KB [ 1.609032] md126: detected capacity change from 0 to 256066453504 [ 1.610413] md126: p1 p2 [ 1.652732] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.684769] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x122c00, board id: 1690, fw id: 934878 [ 1.720481] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3 [ 1.769049] hub 1-1:1.0: USB hub found [ 1.769279] hub 1-1:1.0: 6 ports detected [ 1.847164] tsc: Refined TSC clocksource calibration: 2793.653 MHz [ 1.847269] Switching to clocksource tsc [ 1.873020] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.973280] dracut: luksOpen /dev/md126p2 luks-54ed2bf3-fb3d-4442-b8be-2f0cfda6a521 [ 1.987989] hub 3-1:1.0: USB hub found [ 1.988152] hub 3-1:1.0: 8 ports detected [ 2.063649] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.205828] usb 1-1.2: new full-speed USB device number 4 using ehci-pci [ 2.371821] usb 1-1.3: new high-speed USB device number 5 using ehci-pci [ 2.553221] usb 1-1.4: new high-speed USB device number 6 using ehci-pci [ 2.642136] usb 1-1.4: config 1 has an invalid interface number: 8 but max is 3 [ 2.642251] usb 1-1.4: config 1 has no interface number 1 [ 8.867308] sha256_ssse3: Using AVX optimized SHA-256 implementation [ 8.868685] bio: create slab at 2 [ 9.036970] dracut: Scanning devices dm-0 for LVM logical volumes vaio/gentoo64a-root [ 9.047835] dracut: inactive '/dev/vaio/gentoo64a-root' [16.00 GiB] inherit [ 9.047960] dracut: inactive '/dev/vaio/portage' [12.00 GiB] inherit [ 9.048083] dracut: inactive '/dev/vaio/home' [180.00 GiB] inherit [ 9.101472] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 9.114257] dracut: Checking ext4: /dev/vaio/gentoo64a-root [ 9.114351] dracut: issuing e2fsck -a /dev/vaio/gentoo64a-root [ 9.164759] dracut: /dev/vaio/gentoo64a-root: clean, 575802/1048576 files, 3584508/4194304 blocks [ 9.166606] dracut: Mounting /dev/vaio/gentoo64a-root with -o noatime,ro [ 9.170110] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 9.177249] dracut: Mounted root filesystem /dev/mapper/vaio-gentoo64a--root [ 9.191434] dracut: Switching root [ 9.509572] systemd-udevd[629]: starting version 204 [ 9.592305] ACPI Warning: 0x000000000000a040-0x000000000000a05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251) [ 9.592311] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.593059] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251) [ 9.593064] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.593068] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 9.593073] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.593076] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 9.593081] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.593083] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 9.593088] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.593090] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 9.593481] Linux agpgart interface v0.103 [ 9.599250] [drm] Initialized drm 1.1.0 20060810 [ 9.605848] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 9.612414] sony_laptop: Sony Notebook Control Driver v0.6 [ 9.612808] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input4 [ 9.613294] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input5 [ 9.621804] hda_codec: ALC275: SKU not ready 0x411111f0 [ 9.624045] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 9.634637] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 9.634769] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 9.635768] sony_laptop: brightness ignored, must be controlled by ACPI video driver [ 9.640801] rtsx_pci 0000:03:00.0: irq 48 for MSI/MSI-X [ 9.640827] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 48 [ 9.646258] [drm] Memory usable by graphics device = 2048M [ 9.646327] i915 0000:00:02.0: setting latency timer to 64 [ 9.651659] cfg80211: Calling CRDA to update world regulatory domain [ 9.654343] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 9.654346] Copyright(c) 2003-2013 Intel Corporation [ 9.654781] iwlwifi 0000:02:00.0: irq 49 for MSI/MSI-X [ 9.655301] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9.655694] r8169 0000:05:00.0: irq 50 for MSI/MSI-X [ 9.658833] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 54:42:49:9a:df:1e, XID 0c900800 IRQ 50 [ 9.658837] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 9.660934] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 9.669285] Bluetooth: Core ver 2.16 [ 9.669307] NET: Registered protocol family 31 [ 9.669309] Bluetooth: HCI device and connection manager initialized [ 9.669893] Bluetooth: HCI socket layer initialized [ 9.669898] Bluetooth: L2CAP socket layer initialized [ 9.669912] Bluetooth: SCO socket layer initialized [ 9.679110] usbcore: registered new interface driver btusb [ 9.689730] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 9.689733] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 9.689735] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 9.689736] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled [ 9.689737] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled [ 9.689739] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 9.689850] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 9.691683] usbcore: registered new interface driver usbserial [ 9.694653] usbcore: registered new interface driver usbserial_generic [ 9.694836] usbserial: USB Serial support registered for generic [ 9.696052] i915 0000:00:02.0: irq 51 for MSI/MSI-X [ 9.696510] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 9.696512] [drm] Driver supports precise vblank timestamp query. [ 9.697541] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 9.698632] usbcore: registered new interface driver qcserial [ 9.703698] usbserial: USB Serial support registered for Qualcomm USB modem [ 9.704816] qcserial 1-1.4:1.0: Qualcomm USB modem converter detected [ 9.706264] usb 1-1.4: Qualcomm USB modem converter now attached to ttyUSB0 [ 9.707735] qcserial 1-1.4:1.2: Qualcomm USB modem converter detected [ 9.708783] usb 1-1.4: Qualcomm USB modem converter now attached to ttyUSB1 [ 9.710406] qcserial 1-1.4:1.3: Qualcomm USB modem converter detected [ 9.711823] usb 1-1.4: Qualcomm USB modem converter now attached to ttyUSB2 [ 9.714046] media: Linux media interface: v0.10 [ 9.714367] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 9.717923] Linux video capture interface: v2.00 [ 9.724810] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 9.727750] uvcvideo: Found UVC 1.00 device USB2.0 Camera (05c8:0318) [ 9.728323] Error: Driver 'pcspkr' is already registered, aborting... [ 9.732007] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10 [ 9.732634] usbcore: registered new interface driver uvcvideo [ 9.732637] USB Video Class driver (1.1.1) [ 9.742513] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 9.742517] [drm] This can cause pipe underruns and display issues. [ 9.742519] [drm] Please upgrade your BIOS to fix this. [ 9.747659] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14 [ 9.748522] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14 [ 9.748947] microcode: CPU0 updated to revision 0x28, date = 2012-04-24 [ 9.748961] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14 [ 9.749013] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14 [ 9.749246] microcode: CPU1 updated to revision 0x28, date = 2012-04-24 [ 9.749257] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14 [ 9.749307] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14 [ 9.749570] microcode: CPU2 updated to revision 0x28, date = 2012-04-24 [ 9.749581] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14 [ 9.749623] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14 [ 9.749897] microcode: CPU3 updated to revision 0x28, date = 2012-04-24 [ 9.749999] perf_event_intel: PEBS enabled due to microcode update [ 9.750160] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 9.758713] fbcon: inteldrmfb (fb0) is primary device [ 9.794844] iTCO_vendor_support: vendor-support=0 [ 9.795691] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 9.795896] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.843467] cfg80211: World regulatory domain updated: [ 9.843468] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.843470] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.843472] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.843473] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.843475] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.843476] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.849983] systemd-udevd[659]: renamed network interface eth0 to enp5s0 [ 9.883014] systemd-udevd[654]: renamed network interface wlan0 to wlp2s0 [ 11.554433] Console: switching to colour frame buffer device 240x67 [ 11.557607] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 11.557609] i915 0000:00:02.0: registered panic notifier [ 11.558105] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.558115] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.558125] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.558135] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.558144] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.558153] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.558162] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 11.559676] acpi device:3e: registered as cooling_device5 [ 11.559965] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 11.560043] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:09/input/input11 [ 11.560584] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 11.739623] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp on [ 12.811871] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 12.888954] EXT4-fs (md126p1): mounted filesystem with ordered data mode. Opts: (null) [ 12.893881] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 12.899494] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 13.312663] microcode: Microcode Update Driver: v2.00 removed. [ 13.798250] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 13.805275] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 14.190399] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 14.197274] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 14.407370] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 15.796584] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.796588] Bluetooth: BNEP filters: protocol multicast [ 15.796596] Bluetooth: BNEP socket layer initialized [ 15.961351] Bluetooth: RFCOMM TTY layer initialized [ 15.961369] Bluetooth: RFCOMM socket layer initialized [ 15.961371] Bluetooth: RFCOMM ver 1.11 [ 16.313208] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 16.317010] zram: Created 4 device(s) ... [ 16.328748] Adding 1572860k swap on /dev/zram0. Priority:10 extents:1 across:1572860k SSFS [ 16.336492] Adding 1572860k swap on /dev/zram1. Priority:10 extents:1 across:1572860k SSFS [ 16.343086] Adding 1572860k swap on /dev/zram2. Priority:10 extents:1 across:1572860k SSFS [ 16.350064] Adding 1572860k swap on /dev/zram3. Priority:10 extents:1 across:1572860k SSFS [ 17.719894] wlp2s0: authenticate with 08:60:6e:cc:a2:94 [ 17.726106] wlp2s0: send auth to 08:60:6e:cc:a2:94 (try 1/3) [ 17.750124] wlp2s0: authenticated [ 17.750971] wlp2s0: associate with 08:60:6e:cc:a2:94 (try 1/3) [ 17.751869] wlp2s0: RX AssocResp from 08:60:6e:cc:a2:94 (capab=0x11 status=0 aid=1) [ 17.755176] wlp2s0: associated [ 17.755240] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 25.781326] ACPI: \_SB_.DOCK: docking [ 25.782919] acpiphp_glue: _handle_hotplug_event_func: Bus check notify on \_SB_.PCI0.RP07.LPMB [ 25.782981] acpiphp_glue: bus exists... trim [ 25.783664] ACPI: Device does not support D3cold [ 25.783814] ACPI: Device does not support D3cold [ 25.784108] ACPI: Device does not support D3cold [ 25.784260] ACPI: Device does not support D3cold [ 25.784402] ACPI: Device does not support D3cold [ 25.784578] ACPI: Device does not support D3cold [ 25.784759] ACPI: Device does not support D3cold [ 25.784845] ACPI: Device does not support D3cold [ 25.784926] ACPI: Device does not support D3cold [ 25.784985] ACPI: Device does not support D3cold [ 25.785031] ACPI: Device does not support D3cold [ 25.785108] ACPI: Device does not support D3cold [ 25.785349] ACPI: Device does not support D3cold [ 25.786114] ACPI: Device does not support D3cold [ 25.786193] ACPI: Device does not support D3cold [ 25.787583] ACPI: Device does not support D3cold [ 25.788548] ACPI: Device does not support D3cold [ 25.789912] ACPI: Device does not support D3cold [ 25.791193] ACPI: Device does not support D3cold [ 25.791312] ACPI: Device does not support D3cold [ 25.793253] ACPI: Device does not support D3cold [ 25.793868] ACPI: Device does not support D3cold [ 25.794678] ACPI: Device does not support D3cold [ 25.794858] ACPI: Device does not support D3cold [ 25.795102] ACPI: Device does not support D3cold [ 25.795761] ACPI: Device does not support D3cold [ 25.796386] ACPI: Device does not support D3cold [ 25.796907] ACPI: Device does not support D3cold [ 25.797320] ACPI: Device does not support D3cold [ 25.797669] ACPI: Device does not support D3cold [ 25.797984] ACPI: Device does not support D3cold [ 25.808038] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 25.808060] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 25.808077] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 25.808095] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 25.808112] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 25.808129] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 25.808146] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 25.808316] pci 0000:08:00.0: [8086:151b] type 01 class 0x060400 [ 25.808494] pci 0000:08:00.0: supports D1 D2 [ 25.808496] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.810088] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:0a:00 [ 25.810399] acpiphp: Slot [1-1] registered [ 25.810440] acpiphp_glue: found ACPI PCI Hotplug slot 2 at PCI 0000:0a:03 [ 25.810878] acpiphp: Slot [2] registered [ 25.810915] acpiphp_glue: found ACPI PCI Hotplug slot 3 at PCI 0000:0a:04 [ 25.811000] acpiphp: Slot [3] registered [ 25.811044] pci 0000:0a:00.0: [8086:151b] type 01 class 0x060400 [ 25.811201] pci 0000:0a:00.0: supports D1 D2 [ 25.811202] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.812688] pci 0000:0a:03.0: [8086:151b] type 01 class 0x060400 [ 25.812858] pci 0000:0a:03.0: supports D1 D2 [ 25.812859] pci 0000:0a:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.815661] pci 0000:0a:04.0: [8086:151b] type 01 class 0x060400 [ 25.815833] pci 0000:0a:04.0: supports D1 D2 [ 25.815834] pci 0000:0a:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.816008] pci 0000:08:00.0: PCI bridge to [bus 0a-1d] [ 25.816019] pci 0000:08:00.0: bridge window [io 0x3000-0x5fff] [ 25.816025] pci 0000:08:00.0: bridge window [mem 0xb0000000-0xc03fffff] [ 25.816035] pci 0000:08:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 25.817416] pci 0000:0a:00.0: PCI bridge to [bus 0b] [ 25.817432] pci 0000:0a:00.0: bridge window [mem 0xc0300000-0xc03fffff] [ 25.820691] pci 0000:0a:03.0: PCI bridge to [bus 0c] [ 25.821446] pci 0000:14:00.0: [8086:151b] type 01 class 0x060400 [ 25.821724] pci 0000:14:00.0: supports D1 D2 [ 25.821726] pci 0000:14:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.822076] pci 0000:0a:04.0: PCI bridge to [bus 14-1d] [ 25.822087] pci 0000:0a:04.0: bridge window [io 0x3000-0x5fff] [ 25.822092] pci 0000:0a:04.0: bridge window [mem 0xb0000000-0xc02fffff] [ 25.822103] pci 0000:0a:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 25.822327] pci 0000:15:03.0: [8086:151b] type 01 class 0x060400 [ 25.822563] pci 0000:15:03.0: supports D1 D2 [ 25.822564] pci 0000:15:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.822737] pci 0000:15:04.0: [8086:151b] type 01 class 0x060400 [ 25.822969] pci 0000:15:04.0: supports D1 D2 [ 25.822971] pci 0000:15:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.823183] pci 0000:14:00.0: PCI bridge to [bus 15-1d] [ 25.823198] pci 0000:14:00.0: bridge window [io 0x3000-0x5fff] [ 25.823206] pci 0000:14:00.0: bridge window [mem 0xb0000000-0xc02fffff] [ 25.823221] pci 0000:14:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 25.823407] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:16:00 [ 25.823432] acpiphp: Slot [1-2] registered [ 25.823460] acpiphp_glue: sibling found, but _SUN doesn't match! [ 25.823518] pci 0000:16:00.0: [1002:6740] type 00 class 0x030000 [ 25.823583] pci 0000:16:00.0: reg 10: [mem 0x00000000-0x0fffffff 64bit pref] [ 25.823865] pci 0000:16:00.0: reg 18: [mem 0x00000000-0x0001ffff 64bit] [ 25.823902] pci 0000:16:00.0: reg 20: [io 0x0000-0x00ff] [ 25.823969] pci 0000:16:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 25.824128] pci 0000:16:00.0: supports D1 D2 [ 25.825147] vgaarb: device added: PCI:0000:16:00.0,decodes=io+mem,owns=none,locks=none [ 25.825152] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 25.825154] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:16:00.0 [ 25.825252] pci 0000:16:00.1: [1002:aa90] type 00 class 0x040300 [ 25.825317] pci 0000:16:00.1: reg 10: [mem 0x00000000-0x00003fff 64bit] [ 25.825689] pci 0000:16:00.1: supports D1 D2 [ 25.826312] pci 0000:15:03.0: PCI bridge to [bus 16] [ 25.826327] pci 0000:15:03.0: bridge window [io 0x5000-0x5fff] [ 25.826335] pci 0000:15:03.0: bridge window [mem 0xc0200000-0xc02fffff] [ 25.826350] pci 0000:15:03.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 25.826588] pci 0000:17:00.0: [8086:151b] type 01 class 0x060400 [ 25.826922] pci 0000:17:00.0: supports D1 D2 [ 25.826924] pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.828648] pci 0000:15:04.0: PCI bridge to [bus 17-1d] [ 25.828665] pci 0000:15:04.0: bridge window [io 0x3000-0x4fff] [ 25.828673] pci 0000:15:04.0: bridge window [mem 0xc0000000-0xc01fffff] [ 25.828688] pci 0000:15:04.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 25.829061] pci 0000:18:00.0: [8086:151b] type 01 class 0x060400 [ 25.829392] pci 0000:18:00.0: supports D1 D2 [ 25.829394] pci 0000:18:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.830132] pci 0000:18:01.0: [8086:151b] type 01 class 0x060400 [ 25.830444] pci 0000:18:01.0: supports D1 D2 [ 25.830446] pci 0000:18:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.831199] pci 0000:18:02.0: [8086:151b] type 01 class 0x060400 [ 25.831515] pci 0000:18:02.0: supports D1 D2 [ 25.831517] pci 0000:18:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.832244] pci 0000:18:03.0: [8086:151b] type 01 class 0x060400 [ 25.832578] pci 0000:18:03.0: supports D1 D2 [ 25.832580] pci 0000:18:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.834004] pci 0000:18:04.0: [8086:151b] type 01 class 0x060400 [ 25.834364] pci 0000:18:04.0: supports D1 D2 [ 25.834368] pci 0000:18:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.834891] pci 0000:17:00.0: PCI bridge to [bus 18-1d] [ 25.834915] pci 0000:17:00.0: bridge window [io 0x3000-0x4fff] [ 25.834927] pci 0000:17:00.0: bridge window [mem 0xc0000000-0xc01fffff] [ 25.834950] pci 0000:17:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 25.835707] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:19:00 [ 25.835748] acpiphp: Slot [1-3] registered [ 25.835842] pci 0000:19:00.0: [10ec:8168] type 00 class 0x020000 [ 25.835905] pci 0000:19:00.0: reg 10: [io 0x0000-0x00ff] [ 25.836011] pci 0000:19:00.0: reg 18: [mem 0x00000000-0x00000fff 64bit pref] [ 25.836101] pci 0000:19:00.0: reg 20: [mem 0x00000000-0x00003fff 64bit pref] [ 25.836376] pci 0000:19:00.0: supports D1 D2 [ 25.836377] pci 0000:19:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 25.837450] pci 0000:18:00.0: PCI bridge to [bus 19] [ 25.837475] pci 0000:18:00.0: bridge window [io 0x4000-0x4fff] [ 25.837507] pci 0000:18:00.0: bridge window [mem 0xd4400000-0xd44fffff 64bit pref] [ 25.838467] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:1a:00 [ 25.838493] acpiphp: Slot [1-4] registered [ 25.838577] pci 0000:1a:00.0: [11ab:6121] type 00 class 0x01018f [ 25.838635] pci 0000:1a:00.0: reg 10: [io 0x8000-0x8007] [ 25.838695] pci 0000:1a:00.0: reg 14: [io 0x8040-0x8043] [ 25.838736] pci 0000:1a:00.0: reg 18: [io 0x8200-0x8207] [ 25.838776] pci 0000:1a:00.0: reg 1c: [io 0x8800-0x8803] [ 25.838816] pci 0000:1a:00.0: reg 20: [io 0x900000-0x90000f] [ 25.838855] pci 0000:1a:00.0: reg 24: [mem 0x00800000-0x008003ff] [ 25.839102] pci 0000:1a:00.0: supports D1 [ 25.839104] pci 0000:1a:00.0: PME# supported from D0 D1 D3hot [ 25.840376] pci 0000:18:01.0: PCI bridge to [bus 1a] [ 25.840402] pci 0000:18:01.0: bridge window [io 0x3000-0x3fff] [ 25.840416] pci 0000:18:01.0: bridge window [mem 0xc0100000-0xc01fffff] [ 25.840776] acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:1b:00 [ 25.840805] acpiphp: Slot [1-5] registered [ 25.840901] pci 0000:1b:00.0: [1033:0194] type 00 class 0x0c0330 [ 25.840980] pci 0000:1b:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit] [ 25.841268] [drm] radeon kernel modesetting enabled. [ 25.841397] pci 0000:1b:00.0: PME# supported from D0 D3hot D3cold [ 25.841731] pci 0000:18:02.0: PCI bridge to [bus 1b] [ 25.841765] pci 0000:18:02.0: bridge window [mem 0xc0000000-0xc00fffff] [ 25.842990] pci 0000:18:03.0: PCI bridge to [bus 1c] [ 25.843635] pci 0000:18:04.0: PCI bridge to [bus 1d] [ 25.844222] pci 0000:08:00.0: BAR 15: can't assign mem pref (size 0x28000000) [ 25.844225] pci 0000:08:00.0: BAR 14: assigned [mem 0xb0000000-0xc06fffff] [ 25.844227] pci 0000:08:00.0: BAR 13: can't assign io (size 0xb000) [ 25.844231] pci 0000:0a:04.0: BAR 15: can't assign mem pref (size 0x20000000) [ 25.844233] pci 0000:0a:00.0: BAR 14: assigned [mem 0xb0000000-0xb01fffff] [ 25.844235] pci 0000:0a:00.0: BAR 15: assigned [mem 0xb0200000-0xb03fffff 64bit pref] [ 25.844237] pci 0000:0a:03.0: BAR 14: assigned [mem 0xb0400000-0xb05fffff] [ 25.844239] pci 0000:0a:03.0: BAR 15: assigned [mem 0xb0600000-0xb07fffff 64bit pref] [ 25.844241] pci 0000:0a:04.0: BAR 14: can't assign mem (size 0x10300000) [ 25.844243] pci 0000:0a:00.0: BAR 13: can't assign io (size 0x1000) [ 25.844244] pci 0000:0a:03.0: BAR 13: can't assign io (size 0x1000) [ 25.844246] pci 0000:0a:04.0: BAR 13: can't assign io (size 0x8000) [ 25.844249] pci 0000:0a:00.0: PCI bridge to [bus 0b] [ 25.844257] pci 0000:0a:00.0: bridge window [mem 0xb0000000-0xb01fffff] [ 25.844263] pci 0000:0a:00.0: bridge window [mem 0xb0200000-0xb03fffff 64bit pref] [ 25.844273] pci 0000:0a:03.0: PCI bridge to [bus 0c] [ 25.844282] pci 0000:0a:03.0: bridge window [mem 0xb0400000-0xb05fffff] [ 25.844288] pci 0000:0a:03.0: bridge window [mem 0xb0600000-0xb07fffff 64bit pref] [ 25.844299] pci 0000:14:00.0: BAR 15: can't assign mem pref (size 0x20000000) [ 25.844301] pci 0000:14:00.0: BAR 14: can't assign mem (size 0x10300000) [ 25.844302] pci 0000:14:00.0: BAR 13: can't assign io (size 0x7000) [ 25.844305] pci 0000:15:03.0: BAR 15: can't assign mem pref (size 0x18000000) [ 25.844307] pci 0000:15:03.0: BAR 14: can't assign mem (size 0x200000) [ 25.844308] pci 0000:15:04.0: BAR 14: can't assign mem (size 0xa00000) [ 25.844310] pci 0000:15:04.0: BAR 15: can't assign mem pref (size 0xa00000) [ 25.844312] pci 0000:15:03.0: BAR 13: can't assign io (size 0x1000) [ 25.844313] pci 0000:15:04.0: BAR 13: can't assign io (size 0x6000) [ 25.844316] pci 0000:16:00.0: BAR 0: can't assign mem pref (size 0x10000000) [ 25.844318] pci 0000:16:00.0: BAR 2: can't assign mem (size 0x20000) [ 25.844319] pci 0000:16:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 25.844321] pci 0000:16:00.1: BAR 0: can't assign mem (size 0x4000) [ 25.844323] pci 0000:16:00.0: BAR 4: can't assign io (size 0x100) [ 25.844325] pci 0000:15:03.0: PCI bridge to [bus 16] [ 25.844360] pci 0000:17:00.0: BAR 14: can't assign mem (size 0xa00000) [ 25.844362] pci 0000:17:00.0: BAR 15: can't assign mem pref (size 0xa00000) [ 25.844363] pci 0000:17:00.0: BAR 13: can't assign io (size 0x5000) [ 25.844368] pci 0000:18:00.0: BAR 14: can't assign mem (size 0x200000) [ 25.844369] pci 0000:18:00.0: BAR 15: can't assign mem pref (size 0x200000) [ 25.844371] pci 0000:18:01.0: BAR 14: can't assign mem (size 0x200000) [ 25.844372] pci 0000:18:01.0: BAR 15: can't assign mem pref (size 0x200000) [ 25.844374] pci 0000:18:02.0: BAR 14: can't assign mem (size 0x200000) [ 25.844376] pci 0000:18:02.0: BAR 15: can't assign mem pref (size 0x200000) [ 25.844377] pci 0000:18:03.0: BAR 14: can't assign mem (size 0x200000) [ 25.844379] pci 0000:18:03.0: BAR 15: can't assign mem pref (size 0x200000) [ 25.844380] pci 0000:18:04.0: BAR 14: can't assign mem (size 0x200000) [ 25.844382] pci 0000:18:04.0: BAR 15: can't assign mem pref (size 0x200000) [ 25.844383] pci 0000:18:00.0: BAR 13: can't assign io (size 0x1000) [ 25.844385] pci 0000:18:01.0: BAR 13: can't assign io (size 0x1000) [ 25.844386] pci 0000:18:02.0: BAR 13: can't assign io (size 0x1000) [ 25.844388] pci 0000:18:03.0: BAR 13: can't assign io (size 0x1000) [ 25.844390] pci 0000:18:04.0: BAR 13: can't assign io (size 0x1000) [ 25.844394] pci 0000:19:00.0: BAR 4: can't assign mem pref (size 0x4000) [ 25.844396] pci 0000:19:00.0: BAR 2: can't assign mem pref (size 0x1000) [ 25.844397] pci 0000:19:00.0: BAR 0: can't assign io (size 0x100) [ 25.844399] pci 0000:18:00.0: PCI bridge to [bus 19] [ 25.844443] pci 0000:1a:00.0: BAR 5: can't assign mem (size 0x400) [ 25.844445] pci 0000:1a:00.0: BAR 4: can't assign io (size 0x10) [ 25.844446] pci 0000:1a:00.0: BAR 0: can't assign io (size 0x8) [ 25.844448] pci 0000:1a:00.0: BAR 2: can't assign io (size 0x8) [ 25.844449] pci 0000:1a:00.0: BAR 1: can't assign io (size 0x4) [ 25.844450] pci 0000:1a:00.0: BAR 3: can't assign io (size 0x4) [ 25.844453] pci 0000:18:01.0: PCI bridge to [bus 1a] [ 25.844495] pci 0000:1b:00.0: BAR 0: can't assign mem (size 0x2000) [ 25.844497] pci 0000:18:02.0: PCI bridge to [bus 1b] [ 25.844540] pci 0000:18:03.0: PCI bridge to [bus 1c] [ 25.844582] pci 0000:18:04.0: PCI bridge to [bus 1d] [ 25.844625] pci 0000:17:00.0: PCI bridge to [bus 18-1d] [ 25.844677] pci 0000:15:04.0: PCI bridge to [bus 17-1d] [ 25.844713] pci 0000:14:00.0: PCI bridge to [bus 15-1d] [ 25.844749] pci 0000:0a:04.0: PCI bridge to [bus 14-1d] [ 25.844772] pci 0000:08:00.0: PCI bridge to [bus 0a-1d] [ 25.844782] pci 0000:08:00.0: bridge window [mem 0xb0000000-0xc06fffff] [ 25.844811] pci 0000:08:00.0: no hotplug settings from platform [ 25.844827] pci 0000:0a:00.0: no hotplug settings from platform [ 25.844843] pci 0000:0a:03.0: no hotplug settings from platform [ 25.844859] pci 0000:0a:04.0: no hotplug settings from platform [ 25.844880] pci 0000:14:00.0: no hotplug settings from platform [ 25.844905] pci 0000:15:03.0: no hotplug settings from platform [ 25.844933] pci 0000:16:00.0: no hotplug settings from platform [ 25.844962] pci 0000:16:00.1: no hotplug settings from platform [ 25.844984] pci 0000:15:04.0: no hotplug settings from platform [ 25.845002] pci 0000:17:00.0: no hotplug settings from platform [ 25.845022] pci 0000:18:00.0: no hotplug settings from platform [ 25.845045] pci 0000:19:00.0: no hotplug settings from platform [ 25.845064] pci 0000:18:01.0: no hotplug settings from platform [ 25.845086] pci 0000:1a:00.0: no hotplug settings from platform [ 25.845106] pci 0000:18:02.0: no hotplug settings from platform [ 25.845128] pci 0000:1b:00.0: no hotplug settings from platform [ 25.845148] pci 0000:18:03.0: no hotplug settings from platform [ 25.845167] pci 0000:18:04.0: no hotplug settings from platform [ 25.846116] pcieport 0000:08:00.0: irq 52 for MSI/MSI-X [ 25.846820] pcieport 0000:0a:00.0: irq 53 for MSI/MSI-X [ 25.847131] pcieport 0000:0a:03.0: irq 54 for MSI/MSI-X [ 25.848599] pcieport 0000:0a:04.0: irq 55 for MSI/MSI-X [ 25.850171] pcieport 0000:14:00.0: irq 56 for MSI/MSI-X [ 25.850742] pcieport 0000:15:03.0: irq 57 for MSI/MSI-X [ 25.851088] pcieport 0000:15:04.0: irq 58 for MSI/MSI-X [ 25.852364] [drm] initializing kernel modesetting (TURKS 0x1002:0x6740 0x104D:0x9084). [ 25.852375] radeon 0000:16:00.0: Fatal error during GPU init [ 25.853140] radeon: probe of 0000:16:00.0 failed with error -12 [ 25.853359] hda-intel 0000:16:00.1: Handle VGA-switcheroo audio client [ 25.853391] ------------[ cut here ]------------ [ 25.853398] WARNING: at drivers/pci/pci.c:130 pci_ioremap_bar+0x69/0x70() [ 25.853400] Modules linked in: ata_generic pata_acpi pata_marvell radeon ttm zram(C) rfcomm bnep rtsx_pci_sdmmc rtsx_pci_ms mmc_core memstick iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm joydev uvcvideo pcspkr videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media arc4 qcserial usb_wwan iwldvm usbserial mac80211 btusb bluetooth r8169 iwlwifi mii cfg80211 rtsx_pci snd_hda_codec_hdmi snd_hda_codec_realtek sony_laptop rfkill i915 snd_hda_intel intel_agp snd_hda_codec intel_gtt snd_hwdep i2c_algo_bit snd_pcm drm_kms_helper snd_page_alloc snd_timer drm snd agpgart lpc_ich mfd_core i2c_i801 sha256_ssse3 sha256_generic dm_crypt raid0 md_mod crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd xhci_hcd ehci_pci ehci_hcd dm_mirror [ 25.853475] dm_region_hash dm_log dm_mod [last unloaded: microcode] [ 25.853482] CPU: 0 PID: 40 Comm: kworker/0:1 Tainted: G C 3.10.0-rc5-rafael #1 [ 25.853484] Hardware name: Sony Corporation VPCZ23A4R/VAIO, BIOS R1013H5 05/21/2012 [ 25.853489] Workqueue: kacpi_hotplug _handle_hotplug_event_func [ 25.853492] ffffffff81a2a38c ffff880253d3f858 ffffffff8165acc8 ffff880253d3f898 [ 25.853497] ffffffff8103c8cb ffff880253d3f878 ffff88025282c000 ffff8802537a0000 [ 25.853502] 0000000000000000 ffff88025282b800 0000000000000001 ffff880253d3f8a8 [ 25.853507] Call Trace: [ 25.853513] [] dump_stack+0x19/0x1b [ 25.853518] [] warn_slowpath_common+0x6b/0xa0 [ 25.853521] [] warn_slowpath_null+0x15/0x20 [ 25.853525] [] pci_ioremap_bar+0x69/0x70 [ 25.853531] [] azx_first_init+0x56/0x600 [snd_hda_intel] [ 25.853535] [] ? pci_get_domain_bus_and_slot+0x2f/0x70 [ 25.853540] [] azx_probe+0x555/0x940 [snd_hda_intel] [ 25.853544] [] ? trace_hardirqs_on+0xd/0x10 [ 25.853548] [] local_pci_probe+0x46/0x80 [ 25.853552] [] pci_device_probe+0xf9/0x120 [ 25.853558] [] driver_probe_device+0x76/0x220 [ 25.853561] [] __device_attach+0x4b/0x60 [ 25.853564] [] ? __driver_attach+0xb0/0xb0 [ 25.853568] [] bus_for_each_drv+0x5c/0x90 [ 25.853572] [] device_attach+0x98/0xb0 [ 25.853576] [] pci_bus_add_device+0x34/0x60 [ 25.853580] [] pci_bus_add_devices+0x39/0xa0 [ 25.853583] [] pci_bus_add_devices+0x87/0xa0 [ 25.853587] [] pci_bus_add_devices+0x87/0xa0 [ 25.853591] [] pci_bus_add_devices+0x87/0xa0 [ 25.853594] [] pci_bus_add_devices+0x87/0xa0 [ 25.853598] [] enable_device+0x370/0x450 [ 25.853601] [] acpiphp_enable_slot+0xca/0x140 [ 25.853603] [] _handle_hotplug_event_func+0xa6/0x1e0 [ 25.853607] [] process_one_work+0x1c2/0x560 [ 25.853610] [] ? process_one_work+0x157/0x560 [ 25.853612] [] worker_thread+0x116/0x370 [ 25.853616] [] ? manage_workers.isra.20+0x2d0/0x2d0 [ 25.853620] [] kthread+0xd6/0xe0 [ 25.853624] [] ? _raw_spin_unlock_irq+0x2b/0x60 [ 25.853629] [] ? __init_kthread_worker+0x70/0x70 [ 25.853634] [] ret_from_fork+0x7c/0xb0 [ 25.853638] [] ? __init_kthread_worker+0x70/0x70 [ 25.853640] ---[ end trace 8851d86037e0cfe0 ]--- [ 25.853643] hda-intel 0000:16:00.1: ioremap error [ 25.854390] pcieport 0000:17:00.0: irq 59 for MSI/MSI-X [ 25.854859] pcieport 0000:18:00.0: irq 60 for MSI/MSI-X [ 25.855275] pcieport 0000:18:01.0: irq 61 for MSI/MSI-X [ 25.855738] pcieport 0000:18:02.0: irq 62 for MSI/MSI-X [ 25.856524] pcieport 0000:18:03.0: irq 63 for MSI/MSI-X [ 25.856970] pcieport 0000:18:04.0: irq 64 for MSI/MSI-X [ 25.857852] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 25.857944] r8169 0000:19:00.0 (unregistered net_device): region #2 not an MMIO resource, aborting [ 25.858182] pata_marvell 0000:1a:00.0: no available native port [ 25.858323] pata_acpi 0000:1a:00.0: no available native port [ 25.858765] xhci_hcd 0000:1b:00.0: init 0000:1b:00.0 fail, -16 [ 25.858781] xhci_hcd: probe of 0000:1b:00.0 failed with error -16 [ 30.969243] ====================================================== [ 30.969283] [ INFO: possible circular locking dependency detected ] [ 30.969309] 3.10.0-rc5-rafael #1 Tainted: G WC [ 30.969331] ------------------------------------------------------- [ 30.969356] kworker/0:1/40 is trying to acquire lock: [ 30.969378] (&slot->crit_sect){+.+.+.}, at: [] acpiphp_disable_slot+0x20/0x140 [ 30.969429] but task is already holding lock: [ 30.969452] (&dock_station->hp_lock){+.+.+.}, at: [] hotplug_dock_devices+0x2c/0xda [ 30.969501] which lock already depends on the new lock. [ 30.969532] the existing dependency chain (in reverse order) is: [ 30.969574] -> #1 (&dock_station->hp_lock){+.+.+.}: [ 30.969618] [] lock_acquire+0x87/0x150 [ 30.969653] [] mutex_lock_nested+0x5e/0x3e0 [ 30.969691] [] register_hotplug_dock_device+0x6a/0xbf [ 30.969731] [] register_slot+0x467/0x5b0 [ 30.969766] [] acpi_ns_walk_namespace+0xbb/0x17b [ 30.969806] [] acpi_walk_namespace+0x8e/0xc8 [ 30.971389] [] acpiphp_enumerate_slots+0x1bd/0x320 [ 30.972995] [] acpi_pci_add_bus+0x2f/0x40 [ 30.974602] [] pcibios_add_bus+0x9/0x10 [ 30.976190] [] pci_add_new_bus+0x1c8/0x390 [ 30.977776] [] pci_scan_bridge+0x5e5/0x620 [ 30.979378] [] enable_device+0x169/0x450 [ 30.980964] [] acpiphp_enable_slot+0xca/0x140 [ 30.982561] [] _handle_hotplug_event_func+0xa6/0x1e0 [ 30.984132] [] process_one_work+0x1c2/0x560 [ 30.985691] [] worker_thread+0x116/0x370 [ 30.987208] [] kthread+0xd6/0xe0 [ 30.988708] [] ret_from_fork+0x7c/0xb0 [ 30.990175] -> #0 (&slot->crit_sect){+.+.+.}: [ 30.993074] [] __lock_acquire+0x1d23/0x1ee0 [ 30.994572] [] lock_acquire+0x87/0x150 [ 30.996055] [] mutex_lock_nested+0x5e/0x3e0 [ 30.997578] [] acpiphp_disable_slot+0x20/0x140 [ 30.999047] [] handle_dock_event_func+0x24/0x40 [ 31.000516] [] hotplug_dock_devices+0x57/0xda [ 31.001946] [] handle_eject_request+0xaf/0xdf [ 31.003384] [] acpi_dock_deferred_cb+0x163/0x1c8 [ 31.004780] [] acpi_os_execute_deferred+0x20/0x2d [ 31.006187] [] process_one_work+0x1c2/0x560 [ 31.007549] [] worker_thread+0x116/0x370 [ 31.008888] [] kthread+0xd6/0xe0 [ 31.010224] [] ret_from_fork+0x7c/0xb0 [ 31.011547] other info that might help us debug this: [ 31.015593] Possible unsafe locking scenario: [ 31.018350] CPU0 CPU1 [ 31.019691] ---- ---- [ 31.021002] lock(&dock_station->hp_lock); [ 31.022327] lock(&slot->crit_sect); [ 31.023650] lock(&dock_station->hp_lock); [ 31.025010] lock(&slot->crit_sect); [ 31.026342] *** DEADLOCK *** [ 31.030353] 4 locks held by kworker/0:1/40: [ 31.031637] #0: (kacpi_hotplug){.+.+.+}, at: [] process_one_work+0x157/0x560 [ 31.032960] #1: ((&dpc->work)#3){+.+.+.}, at: [] process_one_work+0x157/0x560 [ 31.034307] #2: (acpi_scan_lock){+.+.+.}, at: [] acpi_scan_lock_acquire+0x12/0x14 [ 31.035630] #3: (&dock_station->hp_lock){+.+.+.}, at: [] hotplug_dock_devices+0x2c/0xda [ 31.036993] stack backtrace: [ 31.039585] CPU: 0 PID: 40 Comm: kworker/0:1 Tainted: G WC 3.10.0-rc5-rafael #1 [ 31.040899] Hardware name: Sony Corporation VPCZ23A4R/VAIO, BIOS R1013H5 05/21/2012 [ 31.042235] Workqueue: kacpi_hotplug acpi_os_execute_deferred [ 31.043541] ffffffff820a4c00 ffff880253d3f998 ffffffff8165acc8 ffff880253d3f9e8 [ 31.044878] ffffffff81656a54 ffff880253d50798 ffff880253d3fa60 ffff880253d50000 [ 31.046202] ffff880253d50770 ffff880253d50000 ffffffff820a4c00 ffff880253d50798 [ 31.047502] Call Trace: [ 31.048798] [] dump_stack+0x19/0x1b [ 31.050086] [] print_circular_bug+0x2b0/0x2c1 [ 31.051418] [] __lock_acquire+0x1d23/0x1ee0 [ 31.052720] [] ? _raw_spin_unlock_irqrestore+0x65/0x80 [ 31.054022] [] ? __wake_up+0x2d/0x70 [ 31.055350] [] ? acpiphp_disable_slot+0x20/0x140 [ 31.056651] [] lock_acquire+0x87/0x150 [ 31.057978] [] ? acpiphp_disable_slot+0x20/0x140 [ 31.059283] [] ? kfree+0xaf/0x250 [ 31.060609] [] ? acpiphp_disable_slot+0x20/0x140 [ 31.061908] [] mutex_lock_nested+0x5e/0x3e0 [ 31.063234] [] ? acpiphp_disable_slot+0x20/0x140 [ 31.064542] [] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 31.065858] [] acpiphp_disable_slot+0x20/0x140 [ 31.067202] [] handle_dock_event_func+0x24/0x40 [ 31.068521] [] hotplug_dock_devices+0x57/0xda [ 31.069868] [] handle_eject_request+0xaf/0xdf [ 31.071187] [] acpi_dock_deferred_cb+0x163/0x1c8 [ 31.072536] [] acpi_os_execute_deferred+0x20/0x2d [ 31.073856] [] process_one_work+0x1c2/0x560 [ 31.075201] [] ? process_one_work+0x157/0x560 [ 31.076524] [] worker_thread+0x116/0x370 [ 31.077838] [] ? manage_workers.isra.20+0x2d0/0x2d0 [ 31.079191] [] kthread+0xd6/0xe0 [ 31.080508] [] ? _raw_spin_unlock_irq+0x2b/0x60 [ 31.081865] [] ? __init_kthread_worker+0x70/0x70 [ 31.083185] [] ret_from_fork+0x7c/0xb0 [ 31.084532] [] ? __init_kthread_worker+0x70/0x70 [ 31.089594] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=none,decodes=io+mem:owns=none [ 31.096378] pci_bus 0000:0b: busn_res: [bus 0b] is released [ 31.097528] pci_bus 0000:0c: busn_res: [bus 0c] is released [ 31.098487] pci_bus 0000:16: busn_res: [bus 16] is released [ 52.229446] fuse init (API version 7.22) [ 52.440061] ata1.00: configured for UDMA/133 [ 52.440067] ata1: EH complete [ 52.444040] ata2.00: configured for UDMA/133 [ 52.444046] ata2: EH complete [ 52.473608] EXT4-fs (dm-1): re-mounted. Opts: commit=0 [ 52.477959] EXT4-fs (md126p1): re-mounted. Opts: commit=0 [ 52.481721] EXT4-fs (dm-2): re-mounted. Opts: commit=0 [ 52.492858] EXT4-fs (dm-3): re-mounted. Opts: commit=0 [ 57.398831] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 57.398844] Bluetooth: HIDP socket layer initialized [ 57.400870] elecom 0005:056E:0061.0001: unknown main item tag 0x0 [ 57.400974] input: Laser BTmouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/bluetooth/hci0/hci0:36/input12 [ 57.401190] elecom 0005:056E:0061.0001: input,hidraw0: BLUETOOTH HID v0.1e Mouse [Laser BTmouse] on 88:53:2e:c0:50:98