linux-kernel - [PATCH v10 7/8] spi: omap2-mcspi: convert to dma_request_slave_channel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 14 Jun 2013 21:32:49 -0500
From:	Joel A Fernandes <joelagnel@...com>
To:	Tony Lindgren <tony@...mide.com>, Sekhar Nori <nsekhar@...com>,
	Matt Porter <matt@...orter.com>,
	Grant Likely <grant.likely@...retlab.ca>,
	Rob Herring <rob.herring@...xeda.com>,
	Vinod Koul <vinod.koul@...el.com>,
	Mark Brown <broonie@...nsource.wolfsonmicro.com>,
	Benoit Cousson <b-cousson@...com>,
	Russell King <linux@....linux.org.uk>,
	Rob Landley <rob@...dley.net>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Jason Kridner <jkridner@...gleboard.org>,
	Koen Kooi <koen@...gleboard.org>
CC:	Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
	Linux OMAP List <linux-omap@...r.kernel.org>,
	Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
	Linux DaVinci Kernel List 
	<davinci-linux-open-source@...ux.davincidsp.com>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Linux Documentation List <linux-doc@...r.kernel.org>,
	Linux MMC List <linux-mmc@...r.kernel.org>,
	Linux SPI Devel List 
	<spi-devel-general@...ts.sourceforge.net>,
	Arnd Bergmann <arnd@...db.de>,
	Joel A Fernandes <joelagnel@...com>
Subject: [PATCH v10 7/8] spi: omap2-mcspi: convert to dma_request_slave_channel_compat()

From: Matt Porter <mporter@...com>

Convert dmaengine channel requests to use
dma_request_slave_channel_compat(). This supports the DT case of
platforms requiring channel selection from either the OMAP DMA or
the EDMA engine. AM33xx only boots from DT and is the only user
implementing EDMA so in the !DT case we can default to the OMAP DMA
filter.

Signed-off-by: Matt Porter <mporter@...com>
Acked-by: Mark Brown <broonie@...nsource.wolfsonmicro.com>
Signed-off-by: Joel A Fernandes <joelagnel@...com>
---
 drivers/spi/spi-omap2-mcspi.c |   64 ++++++++++++++++++++++++++++-------------
 1 file changed, 44 insertions(+), 20 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 86d2158..ca4ab78 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -102,6 +102,9 @@ struct omap2_mcspi_dma {
 
 	struct completion dma_tx_completion;
 	struct completion dma_rx_completion;
+
+	char dma_rx_ch_name[14];
+	char dma_tx_ch_name[14];
 };
 
 /* use PIO for small transfers, avoiding DMA setup/teardown overhead and
@@ -830,12 +833,20 @@ static int omap2_mcspi_request_dma(struct spi_device *spi)
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 	sig = mcspi_dma->dma_rx_sync_dev;
-	mcspi_dma->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+
+	mcspi_dma->dma_rx =
+		dma_request_slave_channel_compat(mask, omap_dma_filter_fn,
+						 &sig, &master->dev,
+						 mcspi_dma->dma_rx_ch_name);
 	if (!mcspi_dma->dma_rx)
 		goto no_dma;
 
 	sig = mcspi_dma->dma_tx_sync_dev;
-	mcspi_dma->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+	mcspi_dma->dma_tx =
+		dma_request_slave_channel_compat(mask, omap_dma_filter_fn,
+						 &sig, &master->dev,
+						 mcspi_dma->dma_tx_ch_name);
+
 	if (!mcspi_dma->dma_tx) {
 		dma_release_channel(mcspi_dma->dma_rx);
 		mcspi_dma->dma_rx = NULL;
@@ -1256,29 +1267,42 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 		goto free_master;
 
 	for (i = 0; i < master->num_chipselect; i++) {
-		char dma_ch_name[14];
+		char *dma_rx_ch_name = mcspi->dma_channels[i].dma_rx_ch_name;
+		char *dma_tx_ch_name = mcspi->dma_channels[i].dma_tx_ch_name;
 		struct resource *dma_res;
 
-		sprintf(dma_ch_name, "rx%d", i);
-		dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
-				dma_ch_name);
-		if (!dma_res) {
-			dev_dbg(&pdev->dev, "cannot get DMA RX channel\n");
-			status = -ENODEV;
-			break;
-		}
+		sprintf(dma_rx_ch_name, "rx%d", i);
+		if (!pdev->dev.of_node) {
+			dma_res =
+				platform_get_resource_byname(pdev,
+							     IORESOURCE_DMA,
+							     dma_rx_ch_name);
+			if (!dma_res) {
+				dev_dbg(&pdev->dev,
+					"cannot get DMA RX channel\n");
+				status = -ENODEV;
+				break;
+			}
 
-		mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start;
-		sprintf(dma_ch_name, "tx%d", i);
-		dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
-				dma_ch_name);
-		if (!dma_res) {
-			dev_dbg(&pdev->dev, "cannot get DMA TX channel\n");
-			status = -ENODEV;
-			break;
+			mcspi->dma_channels[i].dma_rx_sync_dev =
+				dma_res->start;
 		}
+		sprintf(dma_tx_ch_name, "tx%d", i);
+		if (!pdev->dev.of_node) {
+			dma_res =
+				platform_get_resource_byname(pdev,
+							     IORESOURCE_DMA,
+							     dma_tx_ch_name);
+			if (!dma_res) {
+				dev_dbg(&pdev->dev,
+					"cannot get DMA TX channel\n");
+				status = -ENODEV;
+				break;
+			}
 
-		mcspi->dma_channels[i].dma_tx_sync_dev = dma_res->start;
+			mcspi->dma_channels[i].dma_tx_sync_dev =
+				dma_res->start;
+		}
 	}
 
 	if (status < 0)
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/