| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DC88CAD03C0052499C1907B327FC63229EBEB1@DBDE04.ent.ti.com>
Date: Mon, 17 Jun 2013 06:21:07 +0000
From: "J, KEERTHY" <j-keerthy@...com>
To: "Cousson, Benoit" <b-cousson@...com>
CC: "linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"ldewangan@...dia.com" <ldewangan@...dia.com>,
"grant.likely@...retlab.ca" <grant.likely@...retlab.ca>,
"swarren@...dotorg.org" <swarren@...dotorg.org>,
"swarren@...dia.com" <swarren@...dia.com>,
"sameo@...ux.intel.com" <sameo@...ux.intel.com>,
"gg@...mlogic.co.uk" <gg@...mlogic.co.uk>,
"lee.jones@...aro.org" <lee.jones@...aro.org>,
"devicetree-discuss@...ts.ozlabs.org"
<devicetree-discuss@...ts.ozlabs.org>
Subject: RE: [PATCH v6] ARM: dts: OMAP5: Add Palmas MFD node and regulator
nodes
Hi Benoit,
> -----Original Message-----
> From: J, KEERTHY
> Sent: Thursday, June 13, 2013 10:19 PM
> To: Cousson, Benoit
> Cc: linux-omap@...r.kernel.org; linux-kernel@...r.kernel.org;
> ldewangan@...dia.com; grant.likely@...retlab.ca; swarren@...dotorg.org;
> swarren@...dia.com; sameo@...ux.intel.com; gg@...mlogic.co.uk;
> lee.jones@...aro.org; devicetree-discuss@...ts.ozlabs.org
> Subject: RE: [PATCH v6] ARM: dts: OMAP5: Add Palmas MFD node and
> regulator nodes
>
> Hi Benoit,
>
>
> > -----Original Message-----
> > From: J, KEERTHY
> > Sent: Thursday, June 13, 2013 10:00 AM
> > To: Cousson, Benoit; devicetree-discuss@...ts.ozlabs.org
> > Cc: linux-omap@...r.kernel.org; linux-kernel@...r.kernel.org;
> > ldewangan@...dia.com; grant.likely@...retlab.ca;
> > swarren@...dotorg.org; swarren@...dia.com; sameo@...ux.intel.com;
> > gg@...mlogic.co.uk; lee.jones@...aro.org; J, KEERTHY
> > Subject: [PATCH v6] ARM: dts: OMAP5: Add Palmas MFD node and
> regulator
> > nodes
> >
> > This patch adds Palmas MFD node and the regulator nodes for OMAP5.
> >
> > The node definitions are based on: https://lkml.org/lkml/2013/6/6/25
> >
> > Boot tested on omap5-uevm board.
>
> Could you please pull this patch?
>
A gentle ping on this patch.
> Regards,
> Keerthy
Regards,
Keerthy
>
> >
> > Signed-off-by: Graeme Gregory <gg@...mlogic.co.uk>
> > Signed-off-by: J Keerthy <j-keerthy@...com>
> > Reviewed-by: Stephen Warren <swarren@...dia.com>
> > ---
> > V6:
> > Changed the order of properties.
> >
> > V5:
> > Corrected the IRQ_TYPE flag for OMAP5 board.
> >
> > V4:
> > Removed splitting Palmas node.
> >
> > V3:
> > Moved the entire Palmas device tree node to board file.
> >
> > arch/arm/boot/dts/omap5-uevm.dts | 167
> > ++++++++++++++++++++++++++++++++++++++
> > 1 files changed, 167 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/omap5-uevm.dts
> > b/arch/arm/boot/dts/omap5-uevm.dts
> > index 927db1e..3d0b7b6 100644
> > --- a/arch/arm/boot/dts/omap5-uevm.dts
> > +++ b/arch/arm/boot/dts/omap5-uevm.dts
> > @@ -8,6 +8,8 @@
> > /dts-v1/;
> >
> > #include "omap5.dtsi"
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> >
> > / {
> > model = "TI OMAP5 uEVM board";
> > @@ -254,6 +256,171 @@
> > pinctrl-0 = <&i2c1_pins>;
> >
> > clock-frequency = <400000>;
> > +
> > + palmas: palmas@48 {
> > + compatible = "ti,palmas";
> > + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
> > + interrupt-parent = <&gic>;
> > + reg = <0x48>;
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > +
> > + palmas_pmic {
> > + compatible = "ti,palmas-pmic";
> > + interrupt-parent = <&palmas>;
> > + interrupts = <14 IRQ_TYPE_NONE>;
> > + interrupt-name = "short-irq";
> > +
> > + ti,ldo6-vibrator;
> > +
> > + regulators {
> > + smps123_reg: smps123 {
> > + regulator-name = "smps123";
> > + regulator-min-microvolt = < 600000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps45_reg: smps45 {
> > + regulator-name = "smps45";
> > + regulator-min-microvolt = < 600000>;
> > + regulator-max-microvolt = <1310000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps6_reg: smps6 {
> > + regulator-name = "smps6";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps7_reg: smps7 {
> > + regulator-name = "smps7";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps8_reg: smps8 {
> > + regulator-name = "smps8";
> > + regulator-min-microvolt = < 600000>;
> > + regulator-max-microvolt = <1310000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps9_reg: smps9 {
> > + regulator-name = "smps9";
> > + regulator-min-microvolt = <2100000>;
> > + regulator-max-microvolt = <2100000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + ti,smps-range = <0x80>;
> > + };
> > +
> > + smps10_reg: smps10 {
> > + regulator-name = "smps10";
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo1_reg: ldo1 {
> > + regulator-name = "ldo1";
> > + regulator-min-microvolt = <2800000>;
> > + regulator-max-microvolt = <2800000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo2_reg: ldo2 {
> > + regulator-name = "ldo2";
> > + regulator-min-microvolt = <2900000>;
> > + regulator-max-microvolt = <2900000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo3_reg: ldo3 {
> > + regulator-name = "ldo3";
> > + regulator-min-microvolt = <3000000>;
> > + regulator-max-microvolt = <3000000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo4_reg: ldo4 {
> > + regulator-name = "ldo4";
> > + regulator-min-microvolt = <2200000>;
> > + regulator-max-microvolt = <2200000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo5_reg: ldo5 {
> > + regulator-name = "ldo5";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo6_reg: ldo6 {
> > + regulator-name = "ldo6";
> > + regulator-min-microvolt = <1500000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo7_reg: ldo7 {
> > + regulator-name = "ldo7";
> > + regulator-min-microvolt = <1500000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo8_reg: ldo8 {
> > + regulator-name = "ldo8";
> > + regulator-min-microvolt = <1500000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo9_reg: ldo9 {
> > + regulator-name = "ldo9";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldoln_reg: ldoln {
> > + regulator-name = "ldoln";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldousb_reg: ldousb {
> > + regulator-name = "ldousb";
> > + regulator-min-microvolt = <3250000>;
> > + regulator-max-microvolt = <3250000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > + };
> > + };
> > + };
> > };
> >
> > &i2c5 {
> > --
> > 1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists