linux-kernel - [PATCH] clk/zynq/clkc: Add CLK_SET_RATE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1371509260-2340-1-git-send-email-soren.brinkmann@xilinx.com>
Date:	Mon, 17 Jun 2013 15:47:40 -0700
From:	Soren Brinkmann <soren.brinkmann@...inx.com>
To:	Michal Simek <michal.simek@...inx.com>,
	Mike Turquette <mturquette@...aro.org>
Cc:	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	Soren Brinkmann <soren.brinkmann@...inx.com>
Subject: [PATCH] clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes

Zynq's Ethernet clocks are created by the following hierarchy:
	mux0 ---> div0 ---> div1 ---> mux1 ---> gate
Rate change requests on the gate have to propagate all the way up to
div0 to properly leverage all dividers. Mux1 was missing the
CLK_SET_RATE_PARENT flag, which is required to achieve this.

Signed-off-by: Soren Brinkmann <soren.brinkmann@...inx.com>
---
 drivers/clk/zynq/clkc.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c
index 515a573..089d3e3 100644
--- a/drivers/clk/zynq/clkc.c
+++ b/drivers/clk/zynq/clkc.c
@@ -365,8 +365,9 @@ static void __init zynq_clk_setup(struct device_node *np)
 			CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 20, 6,
 			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
 			&gem0clk_lock);
-	clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2, 0,
-			SLCR_GEM0_CLK_CTRL, 6, 1, 0, &gem0clk_lock);
+	clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2,
+			CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 6, 1, 0,
+			&gem0clk_lock);
 	clks[gem0] = clk_register_gate(NULL, clk_output_name[gem0],
 			"gem0_emio_mux", CLK_SET_RATE_PARENT,
 			SLCR_GEM0_CLK_CTRL, 0, 0, &gem0clk_lock);
@@ -387,8 +388,9 @@ static void __init zynq_clk_setup(struct device_node *np)
 			CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 20, 6,
 			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
 			&gem1clk_lock);
-	clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2, 0,
-			SLCR_GEM1_CLK_CTRL, 6, 1, 0, &gem1clk_lock);
+	clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2,
+			CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 6, 1, 0,
+			&gem1clk_lock);
 	clks[gem1] = clk_register_gate(NULL, clk_output_name[gem1],
 			"gem1_emio_mux", CLK_SET_RATE_PARENT,
 			SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock);
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/