linux-kernel - [PATCH] USB: initialize or shutdown PHY when add or remove host controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1371539701-11441-1-git-send-email-chao.xie@marvell.com>
Date:	Tue, 18 Jun 2013 03:15:01 -0400
From:	Chao Xie <chao.xie@...vell.com>
To:	<gregkh@...uxfoundation.org>, <stern@...land.harvard.edu>,
	<rogerq@...com>, <balbi@...com>, <linux-usb@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>, <xiechao.mail@...il.com>
CC:	Chao Xie <chao.xie@...vell.com>
Subject: [PATCH] USB: initialize or shutdown PHY when add or remove host controller

Some controller need software to initialize PHY before add
host controller, and shut down PHY after remove host controller.
Add the generic code for these controllers so they do not need
do it in its own host controller driver.

Signed-off-by: Chao Xie <chao.xie@...vell.com>
---
 drivers/usb/core/hcd.c |   19 ++++++++++++++++++-
 1 files changed, 18 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index d53547d..b26196b 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -43,6 +43,7 @@
 
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
+#include <linux/usb/phy.h>
 
 #include "usb.h"
 
@@ -2531,12 +2532,22 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	 */
 	set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
 
+	/* Initialize the PHY before other hardware operation. */
+	if (hcd->phy) {
+		retval = usb_phy_init(hcd->phy);
+		if (retval) {
+			dev_err(hcd->self.controller,
+				"can't initialize phy\n");
+			goto err_hcd_driver_setup;
+		}
+	}
+
 	/* "reset" is misnamed; its role is now one-time init. the controller
 	 * should already have been reset (and boot firmware kicked off etc).
 	 */
 	if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
 		dev_err(hcd->self.controller, "can't setup\n");
-		goto err_hcd_driver_setup;
+		goto err_hcd_driver_init_phy;
 	}
 	hcd->rh_pollable = 1;
 
@@ -2608,6 +2619,9 @@ err_hcd_driver_start:
 	if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
 		free_irq(irqnum, hcd);
 err_request_irq:
+err_hcd_driver_init_phy:
+	if (hcd->phy)
+		usb_phy_shutdown(hcd->phy);
 err_hcd_driver_setup:
 err_set_rh_speed:
 	usb_put_dev(hcd->self.root_hub);
@@ -2674,6 +2688,9 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 			free_irq(hcd->irq, hcd);
 	}
 
+	if (hcd->phy)
+		usb_phy_shutdown(hcd->phy);
+
 	usb_put_dev(hcd->self.root_hub);
 	usb_deregister_bus(&hcd->self);
 	hcd_buffer_destroy(hcd);
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/