lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Tue, 18 Jun 2013 08:38:05 -0700 From: Guenter Roeck <linux@...ck-us.net> To: netdev@...r.kernel.org Cc: "David S. Miller" <davem@...emloft.net>, linux-kernel@...r.kernel.org, Guenter Roeck <linux@...ck-us.net>, Frank Li <Frank.Li@...escale.com>, Jim Baxter <jim_baxter@...tor.com> Subject: [PATCH v2] net: fec: Fix build for MCF5272 Commits 4c09eed9 (net: fec: Enable imx6 enet checksum acceleration) and baa70a5c (net: fec: enable pause frame to improve rx prefomance for 1G network) introduced functionality into the FEC driver which is not supported on MCF5272. The registers used to implement this functionality do not exist on MCF5272. Since register defines for MCF5272 are separate from register defines for other chips, building images for MCF5272 fails, complaining about several undefined symbols. Adding the missing register defines is not an option, since the registers do not exist on MCF5272. Disable the added functionality for MCF5272 builds. Cc: Frank Li <Frank.Li@...escale.com> Cc: Jim Baxter <jim_baxter@...tor.com> Signed-off-by: Guenter Roeck <linux@...ck-us.net> --- v2: Improved explanation to clarify that the build fails due to missing register defines which can not be added since the registers don't exist on MCF5272. This problem exists in 3.9 as well, though only due to commit baa70a5c. The patch does therefore not cleanly apply to 3.9. Options I can see are to ignore the build error in 3.9, to back-port the patch manually, or to split it into two separate patches. David, let me know which approach you prefer. drivers/net/ethernet/freescale/fec_main.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index a667015..d48099f 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -516,6 +516,7 @@ fec_restart(struct net_device *ndev, int duplex) /* Set MII speed */ writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); +#if !defined(CONFIG_M5272) /* set RX checksum */ val = readl(fep->hwp + FEC_RACC); if (fep->csum_flags & FLAG_RX_CSUM_ENABLED) @@ -523,6 +524,7 @@ fec_restart(struct net_device *ndev, int duplex) else val &= ~FEC_RACC_OPTIONS; writel(val, fep->hwp + FEC_RACC); +#endif /* * The phy interface and speed need to get configured @@ -575,6 +577,7 @@ fec_restart(struct net_device *ndev, int duplex) #endif } +#if !defined(CONFIG_M5272) /* enable pause frame*/ if ((fep->pause_flag & FEC_PAUSE_FLAG_ENABLE) || ((fep->pause_flag & FEC_PAUSE_FLAG_AUTONEG) && @@ -592,6 +595,7 @@ fec_restart(struct net_device *ndev, int duplex) } else { rcntl &= ~FEC_ENET_FCE; } +#endif /* !defined(CONFIG_M5272) */ writel(rcntl, fep->hwp + FEC_R_CNTRL); @@ -1205,7 +1209,9 @@ static int fec_enet_mii_probe(struct net_device *ndev) /* mask with MAC supported features */ if (id_entry->driver_data & FEC_QUIRK_HAS_GBIT) { phy_dev->supported &= PHY_GBIT_FEATURES; +#if !defined(CONFIG_M5272) phy_dev->supported |= SUPPORTED_Pause; +#endif } else phy_dev->supported &= PHY_BASIC_FEATURES; @@ -1390,6 +1396,8 @@ static int fec_enet_get_ts_info(struct net_device *ndev, } } +#if !defined(CONFIG_M5272) + static void fec_enet_get_pauseparam(struct net_device *ndev, struct ethtool_pauseparam *pause) { @@ -1436,9 +1444,13 @@ static int fec_enet_set_pauseparam(struct net_device *ndev, return 0; } +#endif /* !defined(CONFIG_M5272) */ + static const struct ethtool_ops fec_enet_ethtool_ops = { +#if !defined(CONFIG_M5272) .get_pauseparam = fec_enet_get_pauseparam, .set_pauseparam = fec_enet_set_pauseparam, +#endif .get_settings = fec_enet_get_settings, .set_settings = fec_enet_set_settings, .get_drvinfo = fec_enet_get_drvinfo, @@ -1874,10 +1886,12 @@ fec_probe(struct platform_device *pdev) /* setup board info structure */ fep = netdev_priv(ndev); +#if !defined(CONFIG_M5272) /* default enable pause frame auto negotiation */ if (pdev->id_entry && (pdev->id_entry->driver_data & FEC_QUIRK_HAS_GBIT)) fep->pause_flag |= FEC_PAUSE_FLAG_AUTONEG; +#endif fep->hwp = devm_request_and_ioremap(&pdev->dev, r); fep->pdev = pdev; -- 1.7.9.7 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists