[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACRpkdap753rf82jqDx4CGRcsNRUYwsrsfpJe4=331NQom6SuA@mail.gmail.com>
Date: Wed, 19 Jun 2013 10:40:04 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: Kevin Strasser <kevin.strasser@...ux.intel.com>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Darren Hart <dvhart@...ux.intel.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
Guenter Roeck <linux@...ck-us.net>,
Michael Brunner <Michael.Brunner@...tron.com>,
Michael Brunner <mibru@....de>,
Chris Healy <chealy@...co-us.com>,
Thomas Gleixner <tglx@...utronix.de>,
Dirk Hohndel <Dirk.Hohndel@...el.com>,
Wolfram Sang <wsa@...-dreams.de>,
Ben Dooks <ben-linux@...ff.org>,
Grant Likely <grant.likely@...retlab.ca>,
Wim Van Sebroeck <wim@...ana.be>,
Mark Brown <broonie@...nel.org>
Subject: Re: [PATCH v2 1/4] mfd: Kontron PLD mfd driver
On Tue, Jun 18, 2013 at 11:04 PM, Kevin Strasser
<kevin.strasser@...ux.intel.com> wrote:
> Add core MFD driver for the on-board PLD found on some Kontron embedded
> modules. The PLD device may provide functions like watchdog, GPIO, UART
> and I2C bus.
>
> The following modules are supported:
> * COMe-bIP#
> * COMe-bPC2 (ETXexpress-PC)
> * COMe-bSC# (ETXexpress-SC T#)
> * COMe-cCT6
> * COMe-cDC2 (microETXexpress-DC)
> * COMe-cPC2 (microETXexpress-PC)
> * COMe-mCT10
> * ETX-OH
>
> Signed-off-by: Kevin Strasser <kevin.strasser@...ux.intel.com>
> Signed-off-by: Michael Brunner <michael.brunner@...tron.com>
> Acked-by: Guenter Roeck <linux@...ck-us.net>
> Acked-by: Darren Hart <dvhart@...ux.intel.com>
(...)
> +/**
> + * kempld_read8 - read 8 bit register
> + * @pld: kempld_device_data structure describing the PLD
> + * @index: register index on the chip
> + *
> + * kempld_get_mutex must be called prior to calling this function.
> + */
> +u8 kempld_read8(struct kempld_device_data *pld, u8 index)
> +{
> + iowrite8(index, pld->io_index);
> + return ioread8(pld->io_data);
> +}
> +EXPORT_SYMBOL_GPL(kempld_read8);
> +
> +/**
> + * kempld_write8 - write 8 bit register
> + * @pld: kempld_device_data structure describing the PLD
> + * @index: register index on the chip
> + * @data: new register value
> + *
> + * kempld_get_mutex must be called prior to calling this function.
> + */
> +void kempld_write8(struct kempld_device_data *pld, u8 index, u8 data)
> +{
> + iowrite8(index, pld->io_index);
> + iowrite8(data, pld->io_data);
> +}
> +EXPORT_SYMBOL_GPL(kempld_write8);
> +
> +/**
> + * kempld_read16 - read 16 bit register
> + * @pld: kempld_device_data structure describing the PLD
> + * @index: register index on the chip
> + *
> + * kempld_get_mutex must be called prior to calling this function.
> + */
> +u16 kempld_read16(struct kempld_device_data *pld, u8 index)
> +{
> + return kempld_read8(pld, index) | kempld_read8(pld, index + 1) << 8;
> +}
> +EXPORT_SYMBOL_GPL(kempld_read16);
> +
> +/**
> + * kempld_write16 - write 16 bit register
> + * @pld: kempld_device_data structure describing the PLD
> + * @index: register index on the chip
> + * @data: new register value
> + *
> + * kempld_get_mutex must be called prior to calling this function.
> + */
> +void kempld_write16(struct kempld_device_data *pld, u8 index, u16 data)
> +{
> + kempld_write8(pld, index, (u8)data);
> + kempld_write8(pld, index + 1, (u8)(data >> 8));
> +}
> +EXPORT_SYMBOL_GPL(kempld_write16);
> +
> +/**
> + * kempld_read32 - read 32 bit register
> + * @pld: kempld_device_data structure describing the PLD
> + * @index: register index on the chip
> + *
> + * kempld_get_mutex must be called prior to calling this function.
> + */
> +u32 kempld_read32(struct kempld_device_data *pld, u8 index)
> +{
> + return kempld_read16(pld, index) | kempld_read16(pld, index + 2) << 16;
> +}
> +EXPORT_SYMBOL_GPL(kempld_read32);
> +
> +/**
> + * kempld_write32 - write 32 bit register
> + * @pld: kempld_device_data structure describing the PLD
> + * @index: register index on the chip
> + * @data: new register value
> + *
> + * kempld_get_mutex must be called prior to calling this function.
> + */
> +void kempld_write32(struct kempld_device_data *pld, u8 index, u32 data)
> +{
> + kempld_write16(pld, index, (u16)data);
> + kempld_write16(pld, index + 2, (u16)(data >> 16));
> +}
> +EXPORT_SYMBOL_GPL(kempld_write32);
(...)
> +extern u8 kempld_read8(struct kempld_device_data *pld, u8 index);
> +extern void kempld_write8(struct kempld_device_data *pld, u8 index, u8 data);
> +extern u16 kempld_read16(struct kempld_device_data *pld, u8 index);
> +extern void kempld_write16(struct kempld_device_data *pld, u8 index, u16 data);
> +extern u32 kempld_read32(struct kempld_device_data *pld, u8 index);
> +extern void kempld_write32(struct kempld_device_data *pld, u8 index, u32 data);
Not really my business, but I think if I was to implement this
inter-module API I would use regmap for this read/write marshalling
right here.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists