| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CANuQgHEd3L=F20Nrp3zWh2+uXvRU9P_KVN=1xr3RXnoGBsaHLw@mail.gmail.com>
Date: Wed, 19 Jun 2013 17:39:21 +0530
From: Chander Kashyap <chander.kashyap@...aro.org>
To: Kukjin Kim <kgene.kim@...sung.com>
Cc: Tomasz Figa <tomasz.figa@...il.com>,
Tomasz Figa <t.figa@...sung.com>,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Russell King - ARM Linux <linux@....linux.org.uk>,
Jingoo Han <jg1.han@...sung.com>,
Jonghwan Choi <jhbird.choi@...sung.com>,
Abhilash Kesavan <a.kesavan@...sung.com>,
linux-kernel@...r.kernel.org, stable@...r.kernel.org,
Kyungmin Park <kyungmin.park@...sung.com>,
Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>
Subject: Re: [PATCH] ARM: EXYNOS: Fix incorrect usage of S5P_ARM_CORE1_* registers
On 18 June 2013 23:29, Kukjin Kim <kgene.kim@...sung.com> wrote:
> On 06/19/13 02:45, Tomasz Figa wrote:
>>
>> Ccing Arnd and Olof, because I forgot to add them to git send-email...
>>
>> Sorry for the noise.
>>
>> On Tuesday 18 of June 2013 17:26:31 Tomasz Figa wrote:
>>>
>>> S5P_ARM_CORE1_* registers affect only core 1. To control further cores
>>> properly another registers must be used.
>>>
>>> This patch replaces S5P_ARM_CORE1_* register definitions with
>>> S5P_ARM_CORE_*(x) macro which return addresses of registers for
>>> specified core.
>>>
>>> This fixes CPU hotplug on quad core Exynos SoCs on which currently
>>> offlining CPUs 2 or 3 caused CPU 1 to be turned off.
>>
>>
>> Obviously this doesn't happen currently because of the if (cpu == 1), but
>
>
> Yes, not happened...and just note exynos5440 doesn't support hotplug :) so
> this is available on exynos4412 and added 5420.
>
>
>> if logical cpu1 turned out not to be physical cpu1, then it would crash.
>>
>> Best regards,
>> Tomasz
>>
>>> In addition,
>>> bring-up of CPU 2 and 3 is fixed on boards where bootloader powers off
>>> secondary cores by default.
>>>
> I need to test on board about above...
>
>>> Cc: stable@...r.kernel.org
>>> Signed-off-by: Tomasz Figa<t.figa@...sung.com>
>>> Signed-off-by: Kyungmin Park<kyungmin.park@...sung.com>
>>> ---
>>> arch/arm/mach-exynos/hotplug.c | 9 +++++----
>>> arch/arm/mach-exynos/include/mach/regs-pmu.h | 10 +++++++---
>>> arch/arm/mach-exynos/platsmp.c | 9 +++++----
>>> 3 files changed, 17 insertions(+), 11 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-exynos/hotplug.c
>>> b/arch/arm/mach-exynos/hotplug.c index af90cfa..c089943 100644
>>> --- a/arch/arm/mach-exynos/hotplug.c
>>> +++ b/arch/arm/mach-exynos/hotplug.c
>>> @@ -93,10 +93,11 @@ static inline void cpu_leave_lowpower(void)
>>> static inline void platform_do_lowpower(unsigned int cpu, int
>>> *spurious) {
>>> for (;;) {
>>> + void __iomem *reg_base;
>>> + unsigned int phys_cpu = cpu_logical_map(cpu);
>>>
>>> - /* make cpu1 to be turned off at next WFI command */
>>> - if (cpu == 1)
>>> - __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
>>> + reg_base = S5P_ARM_CORE_CONFIGURATION(phys_cpu);
Tomasz,
This will break for non-zero, MPIDR value. Say if MPIDR is 1 then for
cpu0 phys_cpu value will be 0x100,
and address calculation will be (S5P_ARM_CORE0_CONFIGURATION +
((0x101) * 0x80)), which is wrong.
>>> + __raw_writel(0, reg_base);
>>>
>>> /*
>>> * here's the WFI
>>> @@ -106,7 +107,7 @@ static inline void platform_do_lowpower(unsigned int
>>> cpu, int *spurious)
>>> : "memory", "cc");
>>>
>>> - if (pen_release == cpu_logical_map(cpu)) {
>>> + if (pen_release == phys_cpu) {
>>> /*
>>> * OK, proper wakeup, we're done
>>> */
>>> diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h
>>> b/arch/arm/mach-exynos/include/mach/regs-pmu.h index 57344b7..cf40b86
>>> 100644
>>> --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
>>> +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
>>> @@ -125,10 +125,14 @@
>>> #define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0)
>>>
>>> #define S5P_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000)
>>> +#define S5P_ARM_CORE0_STATUS S5P_PMUREG(0x2004)
>>> #define S5P_ARM_CORE0_OPTION S5P_PMUREG(0x2008)
>>> -#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080)
>>> -#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084)
>>> -#define S5P_ARM_CORE1_OPTION S5P_PMUREG(0x2088)
>>> +#define S5P_ARM_CORE_CONFIGURATION(_nr) \
>>> + (S5P_ARM_CORE0_CONFIGURATION + ((_nr) * 0x80))
>>> +#define S5P_ARM_CORE_STATUS(_nr) \
>>> + (S5P_ARM_CORE0_STATUS + ((_nr) * 0x80))
>>> +#define S5P_ARM_CORE_OPTION(_nr) \
>>> + (S5P_ARM_CORE0_OPTION + ((_nr) * 0x80))
>>>
>>> #define S5P_ARM_COMMON_OPTION S5P_PMUREG(0x2408)
>>> #define S5P_TOP_PWR_OPTION S5P_PMUREG(0x2C48)
>>> diff --git a/arch/arm/mach-exynos/platsmp.c
>>> b/arch/arm/mach-exynos/platsmp.c index d9c6d0a..2cbabc8 100644
>>> --- a/arch/arm/mach-exynos/platsmp.c
>>> +++ b/arch/arm/mach-exynos/platsmp.c
>>> @@ -109,14 +109,15 @@ static int __cpuinit
>>> exynos_boot_secondary(unsigned int cpu, struct task_struct */
>>> write_pen_release(phys_cpu);
>>>
>>> - if (!(__raw_readl(S5P_ARM_CORE1_STATUS)& S5P_CORE_LOCAL_PWR_EN))
>>
>> {
>>>
>>> + if (!(__raw_readl(S5P_ARM_CORE_STATUS(phys_cpu))
>>> + & S5P_CORE_LOCAL_PWR_EN)) {
>>> __raw_writel(S5P_CORE_LOCAL_PWR_EN,
>>> - S5P_ARM_CORE1_CONFIGURATION);
>>> + S5P_ARM_CORE_CONFIGURATION(phys_cpu));
>>>
>>> timeout = 10;
>>>
>>> /* wait max 10 ms until cpu1 is on */
>>> - while ((__raw_readl(S5P_ARM_CORE1_STATUS)
>>> + while ((__raw_readl(S5P_ARM_CORE_STATUS(phys_cpu))
Ditto
>>> & S5P_CORE_LOCAL_PWR_EN) !=
>>> S5P_CORE_LOCAL_PWR_EN)
>>
>> {
>>>
>>> if (timeout-- == 0)
>>> break;
>>> @@ -125,7 +126,7 @@ static int __cpuinit exynos_boot_secondary(unsigned
>>> int cpu, struct task_struct }
>>>
>>> if (timeout == 0) {
>>> - printk(KERN_ERR "cpu1 power enable failed");
>>> + printk(KERN_ERR "cpu%u power enable failed",
>>> cpu);
>>> spin_unlock(&boot_lock);
>>> return -ETIMEDOUT;
>>> }
>>
>> --
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc"
> in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
with warm regards,
Chander Kashyap
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists