| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <51C20416.7010809@ti.com>
Date: Wed, 19 Jun 2013 15:18:46 -0400
From: Eduardo Valentin <eduardo.valentin@...com>
To: Amit Daniel Kachhap <amit.daniel@...sung.com>
CC: <linux-pm@...r.kernel.org>, Zhang Rui <rui.zhang@...el.com>,
Eduardo Valentin <eduardo.valentin@...com>,
<linux-samsung-soc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <amit.kachhap@...il.com>,
Kukjin Kim <kgene.kim@...sung.com>, <jonghwa3.lee@...sung.com>
Subject: Re: [PATCH V6 06/30] thermal: exynos: Move exynos_thermal.h from
include/* to driver/* folder
On 17-06-2013 02:46, Amit Daniel Kachhap wrote:
> This patch renames and moves include/linux/platform_data/exynos_thermal.h to
> drivers/thermal/samsung/exynos_tmu.h. This file movement is needed as exynos
> SOC's are not supporting non-DT based platforms and this file now just contains
> exynos tmu driver related definations.
> Also struct freq_clip_table is now moved to exynos_thermal_common.c as it fixes
> the compilation issue occuring because now this new tmu header file is included
> in tmu driver c file and not in the common thermal header file.
>
> Acked-by: Kukjin Kim <kgene.kim@...sung.com>
> Acked-by: Jonghwa Lee <jonghwa3.lee@...sung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@...sung.com>
> ---
> drivers/thermal/samsung/exynos_thermal_common.c | 1 -
> drivers/thermal/samsung/exynos_thermal_common.h | 15 ++++++++++++
> drivers/thermal/samsung/exynos_tmu.c | 2 +-
> .../thermal/samsung/exynos_tmu.h | 24 ++++---------------
> 4 files changed, 21 insertions(+), 21 deletions(-)
> rename include/linux/platform_data/exynos_thermal.h => drivers/thermal/samsung/exynos_tmu.h (84%)
>
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
> index 92e50bc..dd49c9f 100644
> --- a/drivers/thermal/samsung/exynos_thermal_common.c
> +++ b/drivers/thermal/samsung/exynos_thermal_common.c
> @@ -21,7 +21,6 @@
> */
>
> #include <linux/cpu_cooling.h>
> -#include <linux/platform_data/exynos_thermal.h>
> #include <linux/slab.h>
> #include <linux/thermal.h>
>
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
> index 8df1848..068f56c 100644
> --- a/drivers/thermal/samsung/exynos_thermal_common.h
> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
> @@ -44,6 +44,21 @@
>
> #define EXYNOS_ZONE_COUNT 3
>
> +/**
> + * struct freq_clip_table
> + * @freq_clip_max: maximum frequency allowed for this cooling state.
> + * @temp_level: Temperature level at which the temperature clipping will
> + * happen.
> + * @mask_val: cpumask of the allowed cpu's where the clipping will take place.
> + *
> + * This structure is required to be filled and passed to the
> + * cpufreq_cooling_unregister function.
> + */
> +struct freq_clip_table {
> + unsigned int freq_clip_max;
> + unsigned int temp_level;
> + const struct cpumask *mask_val;
> +};
> struct thermal_trip_point_conf {
> int trip_val[MAX_TRIP_COUNT];
> int trip_count;
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 22a8874..6aa2fd2 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -27,9 +27,9 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/platform_device.h>
> -#include <linux/platform_data/exynos_thermal.h>
>
> #include "exynos_thermal_common.h"
> +#include "exynos_tmu.h"
>
> /* Exynos generic registers */
> #define EXYNOS_TMU_REG_TRIMINFO 0x0
> diff --git a/include/linux/platform_data/exynos_thermal.h b/drivers/thermal/samsung/exynos_tmu.h
> similarity index 84%
> rename from include/linux/platform_data/exynos_thermal.h
> rename to drivers/thermal/samsung/exynos_tmu.h
> index da7e627..9e0f887 100644
> --- a/include/linux/platform_data/exynos_thermal.h
> +++ b/drivers/thermal/samsung/exynos_tmu.h
> @@ -1,8 +1,9 @@
> /*
> - * exynos_thermal.h - Samsung EXYNOS TMU (Thermal Management Unit)
> + * exynos_tmu.h - Samsung EXYNOS TMU (Thermal Management Unit)
> *
> * Copyright (C) 2011 Samsung Electronics
> * Donggeun Kim <dg77.kim@...sung.com>
> + * Amit Daniel Kachhap <amit.daniel@...sung.com>
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> @@ -19,8 +20,8 @@
> * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> */
>
> -#ifndef _LINUX_EXYNOS_THERMAL_H
> -#define _LINUX_EXYNOS_THERMAL_H
> +#ifndef _EXYNOS_TMU_H
> +#define _EXYNOS_TMU_H
> #include <linux/cpu_cooling.h>
>
> enum calibration_type {
> @@ -33,21 +34,6 @@ enum soc_type {
> SOC_ARCH_EXYNOS4210 = 1,
> SOC_ARCH_EXYNOS,
> };
> -/**
> - * struct freq_clip_table
> - * @freq_clip_max: maximum frequency allowed for this cooling state.
> - * @temp_level: Temperature level at which the temperature clipping will
> - * happen.
> - * @mask_val: cpumask of the allowed cpu's where the clipping will take place.
> - *
> - * This structure is required to be filled and passed to the
> - * cpufreq_cooling_unregister function.
> - */
> -struct freq_clip_table {
> - unsigned int freq_clip_max;
> - unsigned int temp_level;
> - const struct cpumask *mask_val;
> -};
>
> /**
> * struct exynos_tmu_platform_data
> @@ -116,4 +102,4 @@ struct exynos_tmu_platform_data {
> struct freq_clip_table freq_tab[4];
Because you have this struct right here, you need still to have:
+#include "exynos_thermal_common.h"
in your include list of exynos_tmu.h (this file).
A part from this minor issue, you can add my acked:
Acked-by: Eduardo Valentin <eduardo.valentin@...com>
> unsigned int freq_tab_count;
> };
> -#endif /* _LINUX_EXYNOS_THERMAL_H */
> +#endif /* _EXYNOS_TMU_H */
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
Download attachment "signature.asc" of type "application/pgp-signature" (296 bytes)
Powered by blists - more mailing lists