| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 21 Jun 2013 10:04:00 +0530
From: amit daniel kachhap <amit.daniel@...sung.com>
To: Eduardo Valentin <eduardo.valentin@...com>
Cc: linux-pm@...r.kernel.org, Zhang Rui <rui.zhang@...el.com>,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
Kukjin Kim <kgene.kim@...sung.com>, jonghwa3.lee@...sung.com
Subject: Re: [PATCH V6 06/30] thermal: exynos: Move exynos_thermal.h from
include/* to driver/* folder
On Thu, Jun 20, 2013 at 12:50 AM, Eduardo Valentin
<eduardo.valentin@...com> wrote:
> On 19-06-2013 15:18, Eduardo Valentin wrote:
>> On 17-06-2013 02:46, Amit Daniel Kachhap wrote:
>>> This patch renames and moves include/linux/platform_data/exynos_thermal.h to
>>> drivers/thermal/samsung/exynos_tmu.h. This file movement is needed as exynos
>>> SOC's are not supporting non-DT based platforms and this file now just contains
>>> exynos tmu driver related definations.
>>> Also struct freq_clip_table is now moved to exynos_thermal_common.c as it fixes
>>> the compilation issue occuring because now this new tmu header file is included
>>> in tmu driver c file and not in the common thermal header file.
>>>
>>> Acked-by: Kukjin Kim <kgene.kim@...sung.com>
>>> Acked-by: Jonghwa Lee <jonghwa3.lee@...sung.com>
>>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@...sung.com>
>>> ---
>>> drivers/thermal/samsung/exynos_thermal_common.c | 1 -
>>> drivers/thermal/samsung/exynos_thermal_common.h | 15 ++++++++++++
>>> drivers/thermal/samsung/exynos_tmu.c | 2 +-
>>> .../thermal/samsung/exynos_tmu.h | 24 ++++---------------
>>> 4 files changed, 21 insertions(+), 21 deletions(-)
>>> rename include/linux/platform_data/exynos_thermal.h => drivers/thermal/samsung/exynos_tmu.h (84%)
>>>
>>> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
>>> index 92e50bc..dd49c9f 100644
>>> --- a/drivers/thermal/samsung/exynos_thermal_common.c
>>> +++ b/drivers/thermal/samsung/exynos_thermal_common.c
>>> @@ -21,7 +21,6 @@
>>> */
>>>
>>> #include <linux/cpu_cooling.h>
>>> -#include <linux/platform_data/exynos_thermal.h>
>>> #include <linux/slab.h>
>>> #include <linux/thermal.h>
>>>
>>> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
>>> index 8df1848..068f56c 100644
>>> --- a/drivers/thermal/samsung/exynos_thermal_common.h
>>> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
>>> @@ -44,6 +44,21 @@
>>>
>>> #define EXYNOS_ZONE_COUNT 3
>>>
>>> +/**
>>> + * struct freq_clip_table
>>> + * @freq_clip_max: maximum frequency allowed for this cooling state.
>>> + * @temp_level: Temperature level at which the temperature clipping will
>>> + * happen.
>>> + * @mask_val: cpumask of the allowed cpu's where the clipping will take place.
>>> + *
>>> + * This structure is required to be filled and passed to the
>>> + * cpufreq_cooling_unregister function.
>>> + */
>>> +struct freq_clip_table {
>>> + unsigned int freq_clip_max;
>>> + unsigned int temp_level;
>>> + const struct cpumask *mask_val;
>>> +};
>
> Another minor: add an empty line here.
Ok
>
>>> struct thermal_trip_point_conf {
>>> int trip_val[MAX_TRIP_COUNT];
>>> int trip_count;
>>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>>> index 22a8874..6aa2fd2 100644
>>> --- a/drivers/thermal/samsung/exynos_tmu.c
>>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>>> @@ -27,9 +27,9 @@
>>> #include <linux/module.h>
>>> #include <linux/of.h>
>>> #include <linux/platform_device.h>
>>> -#include <linux/platform_data/exynos_thermal.h>
>>>
>>> #include "exynos_thermal_common.h"
>>> +#include "exynos_tmu.h"
>>>
>>> /* Exynos generic registers */
>>> #define EXYNOS_TMU_REG_TRIMINFO 0x0
>>> diff --git a/include/linux/platform_data/exynos_thermal.h b/drivers/thermal/samsung/exynos_tmu.h
>>> similarity index 84%
>>> rename from include/linux/platform_data/exynos_thermal.h
>>> rename to drivers/thermal/samsung/exynos_tmu.h
>>> index da7e627..9e0f887 100644
>>> --- a/include/linux/platform_data/exynos_thermal.h
>>> +++ b/drivers/thermal/samsung/exynos_tmu.h
>>> @@ -1,8 +1,9 @@
>>> /*
>>> - * exynos_thermal.h - Samsung EXYNOS TMU (Thermal Management Unit)
>>> + * exynos_tmu.h - Samsung EXYNOS TMU (Thermal Management Unit)
>>> *
>>> * Copyright (C) 2011 Samsung Electronics
>>> * Donggeun Kim <dg77.kim@...sung.com>
>>> + * Amit Daniel Kachhap <amit.daniel@...sung.com>
>>> *
>>> * This program is free software; you can redistribute it and/or modify
>>> * it under the terms of the GNU General Public License as published by
>>> @@ -19,8 +20,8 @@
>>> * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>>> */
>>>
>>> -#ifndef _LINUX_EXYNOS_THERMAL_H
>>> -#define _LINUX_EXYNOS_THERMAL_H
>>> +#ifndef _EXYNOS_TMU_H
>>> +#define _EXYNOS_TMU_H
>>> #include <linux/cpu_cooling.h>
>>>
>>> enum calibration_type {
>>> @@ -33,21 +34,6 @@ enum soc_type {
>>> SOC_ARCH_EXYNOS4210 = 1,
>>> SOC_ARCH_EXYNOS,
>>> };
>>> -/**
>>> - * struct freq_clip_table
>>> - * @freq_clip_max: maximum frequency allowed for this cooling state.
>>> - * @temp_level: Temperature level at which the temperature clipping will
>>> - * happen.
>>> - * @mask_val: cpumask of the allowed cpu's where the clipping will take place.
>>> - *
>>> - * This structure is required to be filled and passed to the
>>> - * cpufreq_cooling_unregister function.
>>> - */
>>> -struct freq_clip_table {
>>> - unsigned int freq_clip_max;
>>> - unsigned int temp_level;
>>> - const struct cpumask *mask_val;
>>> -};
>>>
>>> /**
>>> * struct exynos_tmu_platform_data
>>> @@ -116,4 +102,4 @@ struct exynos_tmu_platform_data {
>>> struct freq_clip_table freq_tab[4];
>>
>> Because you have this struct right here, you need still to have:
>> +#include "exynos_thermal_common.h"
>>
>> in your include list of exynos_tmu.h (this file).
>>
>> A part from this minor issue, you can add my acked:
>>
>> Acked-by: Eduardo Valentin <eduardo.valentin@...com>
>>
>>> unsigned int freq_tab_count;
>>> };
>>> -#endif /* _LINUX_EXYNOS_THERMAL_H */
>>> +#endif /* _EXYNOS_TMU_H */
>>>
>>
>>
>
>
> --
> You have got to be excited about what you are doing. (L. Lamport)
>
> Eduardo Valentin
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists