| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Pine.LNX.4.64.1306210827090.27277@axis700.grange>
Date: Fri, 21 Jun 2013 08:30:26 +0200 (CEST)
From: Guennadi Liakhovetski <g.liakhovetski@....de>
To: linux-kernel@...r.kernel.org
cc: Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Magnus Damm <magnus.damm@...il.com>, linux-sh@...r.kernel.org
Subject: [PATCH 2/2] regulators: max8973: initial DT support
This patch adds primitive DT support to the max8973 regulator driver. None
of the configuration parameters, supported in the platform data are yet
available in DT, therefore no configuration is performed if booting with
no platform data. This means, that DT instantiation can only be used on
boards, where no run-time configuration of the chip is required. In such
cases the driver can be used to scale its output voltage. In the future
support for configuration parameters should be added.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@...il.com>
---
.../bindings/regulator/max8973-regulator.txt | 25 +++++++
drivers/regulator/max8973-regulator.c | 73 ++++++++++++++++----
2 files changed, 85 insertions(+), 13 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/max8973-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
new file mode 100644
index 0000000..c1629f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
@@ -0,0 +1,25 @@
+* Maxim MAX8973 Voltage Regulator
+
+Required properties:
+
+- compatible: must be "maxium,max8973"
+- reg: the i2c slave address of the regulator. It should be 0x1b.
+- regulators: a subnode with a single regulator descriptor in it called "dcdc"
+
+The single dcdc regulator can use any standard regulator properties.
+
+Example:
+
+ max8973@1b {
+ compatible = "maxium,max8973";
+ reg = <0x1b>;
+
+ regulators {
+ vdd_dvfs: dcdc {
+ regulator-min-microvolt = <935000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index b2dbdd7..ecfdea7 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -26,10 +26,12 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8973-regulator.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/slab.h>
@@ -353,6 +355,10 @@ static int max8973_init_dcdc(struct max8973_chip *max,
return ret;
}
+static struct of_regulator_match max8973_regulator_match = {
+ .name = "dcdc",
+};
+
static const struct regmap_config max8973_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -360,6 +366,32 @@ static const struct regmap_config max8973_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
+static int max8973_regulator_parse_dt(struct device *dev)
+{
+ struct device_node *regulators =
+ of_find_node_by_name(dev->of_node, "regulators");
+ int ret;
+
+ if (!regulators) {
+ dev_err(dev, "regulator node not found\n");
+ return -ENODEV;
+ }
+
+ ret = of_regulator_match(dev, regulators,
+ &max8973_regulator_match, 1);
+ of_node_put(regulators);
+ if (ret < 0) {
+ dev_err(dev, "Error parsing regulator init data: %d\n", ret);
+ return ret;
+ }
+ if (!ret) {
+ dev_err(dev, "No regulator configuration found\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int max8973_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -370,7 +402,12 @@ static int max8973_probe(struct i2c_client *client,
int ret;
pdata = client->dev.platform_data;
- if (!pdata) {
+
+ if (client->dev.of_node) {
+ ret = max8973_regulator_parse_dt(&client->dev);
+ if (ret < 0)
+ return ret;
+ } else if (!pdata) {
dev_err(&client->dev, "No Platform data");
return -EIO;
}
@@ -400,7 +437,7 @@ static int max8973_probe(struct i2c_client *client,
max->desc.uV_step = MAX8973_VOLATGE_STEP;
max->desc.n_voltages = MAX8973_BUCK_N_VOLTAGE;
- if (!pdata->enable_ext_control) {
+ if (!pdata || !pdata->enable_ext_control) {
max->desc.enable_reg = MAX8973_VOUT;
max->desc.enable_mask = MAX8973_VOUT_ENABLE;
max->ops.enable = regulator_enable_regmap;
@@ -408,12 +445,17 @@ static int max8973_probe(struct i2c_client *client,
max->ops.is_enabled = regulator_is_enabled_regmap;
}
- max->enable_external_control = pdata->enable_ext_control;
- max->dvs_gpio = pdata->dvs_gpio;
- max->curr_gpio_val = pdata->dvs_def_state;
- max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
+ if (pdata) {
+ max->dvs_gpio = pdata->dvs_gpio;
+ max->enable_external_control = pdata->enable_ext_control;
+ max->curr_gpio_val = pdata->dvs_def_state;
+ max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
+ } else {
+ max->dvs_gpio = -EINVAL;
+ max->curr_vout_reg = MAX8973_VOUT;
+ }
+
max->lru_index[0] = max->curr_vout_reg;
- max->valid_dvs_gpio = false;
if (gpio_is_valid(max->dvs_gpio)) {
int gpio_flags;
@@ -439,18 +481,23 @@ static int max8973_probe(struct i2c_client *client,
max->lru_index[i] = i;
max->lru_index[0] = max->curr_vout_reg;
max->lru_index[max->curr_vout_reg] = 0;
+ } else {
+ max->valid_dvs_gpio = false;
}
- ret = max8973_init_dcdc(max, pdata);
- if (ret < 0) {
- dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret);
- return ret;
+ if (pdata) {
+ ret = max8973_init_dcdc(max, pdata);
+ if (ret < 0) {
+ dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret);
+ return ret;
+ }
}
config.dev = &client->dev;
- config.init_data = pdata->reg_init_data;
+ config.init_data = pdata ? pdata->reg_init_data :
+ max8973_regulator_match.init_data;
config.driver_data = max;
- config.of_node = client->dev.of_node;
+ config.of_node = max8973_regulator_match.of_node;
config.regmap = max->regmap;
/* Register the regulators */
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists