[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1371799414-3654-1-git-send-email-b.brezillon@overkiz.com>
Date: Fri, 21 Jun 2013 09:23:34 +0200
From: Boris BREZILLON <b.brezillon@...rkiz.com>
To: Wim Van Sebroeck <wim@...ana.be>,
Nicolas Ferre <nicolas.ferre@...el.com>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>,
Ludovic Desroches <ludovic.desroches@...el.com>,
Yang Wenyou <Wenyou.Yang@...el.com>,
Grant Likely <grant.likely@...aro.org>,
Rob Herring <rob.herring@...xeda.com>,
Rob Landley <rob@...dley.net>,
Fabio Porcedda <fabio.porcedda@...il.com>
Cc: linux-watchdog@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree-discuss@...ts.ozlabs.org, linux-doc@...r.kernel.org,
Boris BREZILLON <b.brezillon@...rkiz.com>
Subject: [PATCH v2 2/4] watchdog: at91sam9_wdt: update device tree doc
Add new at91sam9 watchdog properties to the documentation.
Signed-off-by: Boris BREZILLON <b.brezillon@...rkiz.com>
---
.../devicetree/bindings/watchdog/atmel-wdt.txt | 30 ++++++++++++++++++--
1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
index fcdd48f..e043106 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -9,11 +9,37 @@ Required properties:
Optional properties:
- timeout-sec: contains the watchdog timeout in seconds.
+- interrupts : Should contain WDT interrupt.
+- atmel,max-heartbeat-sec : Should contain the maximum heartbeat value in
+ seconds. This value should be less than 16. It is used to compute the
+ WDV field.
+- atmel,min-heartbeat-sec : Should contain the minimum heartbeat value in
+ seconds. This value should be less than 4 times the max-heartbeat-sec
+ value. It is used to compute the WDD field.
+- atmel,watchdog-type : Should be "hardware" or "software". Hardware watchdog
+ use the at91 watchdog reset. Software watchdog use the watchdog
+ interrupt to trigger a software reset.
+- atmel,reset-type : Should be "proc" or "all".
+ "all" : assert peripherals and processor reset signals
+ "proc" : assert the processor reset signal
+ This is valid only when using "hardware" watchdog.
+- atmel,disable : Should be present if you want to disable the watchdog.
+- atmel,idle-halt : Should be present if you want to stop the watchdog when
+ entering idle state.
+- atmel,dbg-halt : Should be present if you want to stop the watchdog when
+ entering debug state.
Example:
-
watchdog@...ffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
- timeout-sec = <10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ timeout-sec = <15>;
+ atmel,watchdog-type = "hardware";
+ atmel,reset-type = "all";
+ atmel,dbg-halt;
+ atmel,idle-halt;
+ atmel,max-heartbeat-sec = <16>;
+ atmel,min-heartbeat-sec = <0>;
+ status = "okay";
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists