lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1371809671-24037-1-git-send-email-nsekhar@ti.com>
Date:	Fri, 21 Jun 2013 15:44:31 +0530
From:	Sekhar Nori <nsekhar@...com>
To:	Joel A Fernandes <joelagnel@...com>
CC:	Linux DaVinci Kernel List 
	<davinci-linux-open-source@...ux.davincidsp.com>,
	Russell King <linux@....linux.org.uk>,
	Benoit Cousson <b-cousson@...com>,
	Arnd Bergmann <arnd@...db.de>,
	Linux Documentation List <linux-doc@...r.kernel.org>,
	Tony Lindgren <tony@...mide.com>,
	Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
	Mark Brown <broonie@...nel.org>,
	Linux MMC List <linux-mmc@...r.kernel.org>,
	Koen Kooi <koen@...gleboard.org>,
	Rob Herring <rob.herring@...xeda.com>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Grant Likely <grant.likely@...retlab.ca>,
	Vinod Koul <vinod.koul@...el.com>,
	Jason Kridner <jkridner@...gleboard.org>,
	Rob Landley <rob@...dley.net>,
	Linux SPI Devel List 
	<spi-devel-general@...ts.sourceforge.net>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Linux OMAP List <linux-omap@...r.kernel.org>,
	Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
	Matt Porter <matt@...orter.com>
Subject: [PATCH] ARM: edma: Add EDMA crossbar event mux support

From: Matt Porter <mporter@...com>

EDMA supports a cross bar which provides ability
to mux additional events into physical channels
present in the channel controller.

This is required when the number of events present
in the system are more than number of available
physical channels.

Changes by Joel:
* Split EDMA xbar support out of original EDMA DT parsing patch
to keep it easier for review.
* Rewrite shift and offset calculation.

Suggested-by: Sekhar Nori <nsekhar@...com>
Suggested by: Andy Shevchenko <andy.shevchenko@...il.com>
Signed-off-by: Joel A Fernandes <joelagnel@...com>
Acked-by: Arnd Bergmann <arnd@...db.de>
[nsekhar@...com: fix checkpatch errors and a minor coding improvement]
Signed-off-by: Sekhar Nori <nsekhar@...com>
---
 arch/arm/common/edma.c             |   78 ++++++++++++++++++++++++++++++++++++
 include/linux/platform_data/edma.h |    1 +
 2 files changed, 79 insertions(+)

diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index b3770ab..2b591b1 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -1378,12 +1378,76 @@ EXPORT_SYMBOL(edma_clear_event);
 
 #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
 
+static int edma_of_read_u32_to_s16_array(const struct device_node *np,
+					 const char *propname, s16 *out_values,
+					 size_t sz)
+{
+	int ret;
+
+	ret = of_property_read_u16_array(np, propname, out_values, sz);
+	if (ret)
+		return ret;
+
+	/* Terminate it */
+	*out_values++ = -1;
+	*out_values++ = -1;
+
+	return 0;
+}
+
+static int edma_xbar_event_map(struct device *dev,
+			       struct device_node *node,
+			       struct edma_soc_info *pdata, int len)
+{
+	int ret, i;
+	struct resource res;
+	void __iomem *xbar;
+	const s16 (*xbar_chans)[2];
+	u32 shift, offset, mux;
+
+	xbar_chans = devm_kzalloc(dev,
+				  len/sizeof(s16) + 2*sizeof(s16),
+				  GFP_KERNEL);
+	if (!xbar_chans)
+		return -ENOMEM;
+
+	ret = of_address_to_resource(node, 1, &res);
+	if (ret)
+		return -EIO;
+
+	xbar = devm_ioremap(dev, res.start, resource_size(&res));
+	if (!xbar)
+		return -ENOMEM;
+
+	ret = edma_of_read_u32_to_s16_array(node,
+					    "ti,edma-xbar-event-map",
+					    (s16 *)xbar_chans,
+					    len/sizeof(u32));
+	if (ret)
+		return -EIO;
+
+	for (i = 0; xbar_chans[i][0] != -1; i++) {
+		shift = (xbar_chans[i][1] & 0x03) << 3;
+		offset = xbar_chans[i][1] & 0xfffffffc;
+		mux = readl(xbar + offset);
+		mux &= ~(0xff << shift);
+		mux |= xbar_chans[i][0] << shift;
+		writel(mux, (xbar + offset));
+	}
+
+	pdata->xbar_chans = xbar_chans;
+
+	return 0;
+}
+
 static int edma_of_parse_dt(struct device *dev,
 			    struct device_node *node,
 			    struct edma_soc_info *pdata)
 {
 	int ret = 0, i;
 	u32 value;
+	struct property *prop;
+	size_t sz;
 	struct edma_rsv_info *rsv_info;
 	s8 (*queue_tc_map)[2], (*queue_priority_map)[2];
 
@@ -1439,6 +1503,10 @@ static int edma_of_parse_dt(struct device *dev,
 
 	pdata->default_queue = 0;
 
+	prop = of_find_property(node, "ti,edma-xbar-event-map", &sz);
+	if (prop)
+		ret = edma_xbar_event_map(dev, node, pdata, sz);
+
 	return ret;
 }
 
@@ -1492,6 +1560,7 @@ static int edma_probe(struct platform_device *pdev)
 	int			status = -1;
 	const s16		(*rsv_chans)[2];
 	const s16		(*rsv_slots)[2];
+	const s16		(*xbar_chans)[2];
 	int			irq[EDMA_MAX_CC] = {0, 0};
 	int			err_irq[EDMA_MAX_CC] = {0, 0};
 	struct resource		*r[EDMA_MAX_CC] = {NULL};
@@ -1599,6 +1668,15 @@ static int edma_probe(struct platform_device *pdev)
 			}
 		}
 
+		/* Clear the xbar mapped channels in unused list */
+		xbar_chans = info[j]->xbar_chans;
+		if (xbar_chans) {
+			for (i = 0; xbar_chans[i][1] != -1; i++) {
+				off = xbar_chans[i][1];
+				clear_bits(off, 1,
+					   edma_cc[j]->edma_unused);
+			}
+		}
 
 		if (node) {
 			irq[j] = irq_of_parse_and_map(node, 0);
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index 317f2be..57300fd 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -177,6 +177,7 @@ struct edma_soc_info {
 
 	s8	(*queue_tc_mapping)[2];
 	s8	(*queue_priority_mapping)[2];
+	const s16	(*xbar_chans)[2];
 };
 
 #endif
-- 
1.7.10.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ