| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1371811707-24634-1-git-send-email-iivanov@mm-sol.com>
Date: Fri, 21 Jun 2013 13:48:27 +0300
From: "Ivan T. Ivanov" <iivanov@...sol.com>
To: linux-arm-msm@...r.kernel.org
Cc: "Ivan T. Ivanov" <iivanov@...sol.com>,
David Brown <davidb@...eaurora.org>,
Daniel Walker <dwalker@...o99.com>,
Bryan Huntsman <bryanh@...eaurora.org>,
Felipe Balbi <balbi@...com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org
Subject: [PATCH] usb: phy: msm: Move mach depndend code to platform data
From: "Ivan T. Ivanov" <iivanov@...sol.com>
This patch fix compilation error and is an intermediate step
before the addition of DeviceTree support for newer targets.
Fix suggested here: https://lkml.org/lkml/2013/6/19/381
Cc: David Brown <davidb@...eaurora.org>
Cc: Daniel Walker <dwalker@...o99.com>
Cc: Bryan Huntsman <bryanh@...eaurora.org>
Cc: Felipe Balbi <balbi@...com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
Cc: linux-usb@...r.kernel.org
Signed-off-by: Ivan T. Ivanov <iivanov@...sol.com>
---
arch/arm/mach-msm/board-msm7x30.c | 35 +++++++++++++++++++++++
arch/arm/mach-msm/board-qsd8x50.c | 34 +++++++++++++++++++++++
drivers/usb/phy/phy-msm-usb.c | 55 ++++++++++---------------------------
include/linux/usb/msm_hsusb.h | 2 ++
4 files changed, 85 insertions(+), 41 deletions(-)
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index db3d8c0..4df7daa 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -31,6 +31,7 @@
#include <asm/setup.h>
#include <mach/board.h>
+#include <mach/clk.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
@@ -61,10 +62,44 @@ static int hsusb_phy_init_seq[] = {
-1
};
+static int hsusb_phy_link_clk_reset(struct clk *link_clk, bool assert)
+{
+ int ret;
+
+ if (assert) {
+ ret = clk_reset(link_clk, CLK_RESET_ASSERT);
+ if (ret)
+ pr_err("usb hs_clk assert failed\n");
+ } else {
+ ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
+ if (ret)
+ pr_err("usb hs_clk deassert failed\n");
+ }
+ return ret;
+}
+
+static int hsusb_phy_clk_reset(struct clk *phy_clk)
+{
+ int ret;
+
+ ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
+ if (ret) {
+ pr_err("usb phy clk assert failed\n");
+ return ret;
+ }
+ usleep_range(10000, 12000);
+ ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
+ if (ret)
+ pr_err("usb phy clk deassert failed\n");
+ return ret;
+}
+
static struct msm_otg_platform_data msm_otg_pdata = {
.phy_init_seq = hsusb_phy_init_seq,
.mode = USB_PERIPHERAL,
.otg_control = OTG_PHY_CONTROL,
+ .phy_link_clk_reset = hsusb_phy_link_clk_reset,
+ .phy_phy_clk_reset = hsusb_phy_clk_reset,
};
struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index f14a73d..d3d92ab 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -82,10 +82,44 @@ static int hsusb_phy_init_seq[] = {
-1
};
+static int hsusb_phy_link_clk_reset(struct clk *link_clk, bool assert)
+{
+ int ret;
+
+ if (assert) {
+ ret = clk_reset(link_clk, CLK_RESET_ASSERT);
+ if (ret)
+ pr_err("usb hs_clk assert failed\n");
+ } else {
+ ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
+ if (ret)
+ pr_err("usb hs_clk deassert failed\n");
+ }
+ return ret;
+}
+
+static int hsusb_phy_clk_reset(struct clk *phy_clk)
+{
+ int ret;
+
+ ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
+ if (ret) {
+ pr_err("usb phy clk assert failed\n");
+ return ret;
+ }
+ usleep_range(10000, 12000);
+ ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
+ if (ret)
+ pr_err("usb phy clk deassert failed\n");
+ return ret;
+}
+
static struct msm_otg_platform_data msm_otg_pdata = {
.phy_init_seq = hsusb_phy_init_seq,
.mode = USB_PERIPHERAL,
.otg_control = OTG_PHY_CONTROL,
+ .phy_link_clk_reset = hsusb_phy_link_clk_reset,
+ .phy_phy_clk_reset = hsusb_phy_clk_reset,
};
static struct platform_device *devices[] __initdata = {
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index d08f334..ab1b880 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -40,8 +40,6 @@
#include <linux/usb/msm_hsusb_hw.h>
#include <linux/regulator/consumer.h>
-#include <mach/clk.h>
-
#define MSM_USB_BASE (motg->regs)
#define DRIVER_NAME "msm_otg"
@@ -306,51 +304,20 @@ static void ulpi_init(struct msm_otg *motg)
}
}
-static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
-{
- int ret;
-
- if (assert) {
- ret = clk_reset(motg->clk, CLK_RESET_ASSERT);
- if (ret)
- dev_err(motg->phy.dev, "usb hs_clk assert failed\n");
- } else {
- ret = clk_reset(motg->clk, CLK_RESET_DEASSERT);
- if (ret)
- dev_err(motg->phy.dev, "usb hs_clk deassert failed\n");
- }
- return ret;
-}
-
-static int msm_otg_phy_clk_reset(struct msm_otg *motg)
-{
- int ret;
-
- ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT);
- if (ret) {
- dev_err(motg->phy.dev, "usb phy clk assert failed\n");
- return ret;
- }
- usleep_range(10000, 12000);
- ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT);
- if (ret)
- dev_err(motg->phy.dev, "usb phy clk deassert failed\n");
- return ret;
-}
-
static int msm_otg_phy_reset(struct msm_otg *motg)
{
+ struct msm_otg_platform_data *pdata = motg->pdata;
u32 val;
int ret;
int retries;
- ret = msm_otg_link_clk_reset(motg, 1);
+ ret = pdata->phy_link_clk_reset(motg->clk, true);
if (ret)
return ret;
- ret = msm_otg_phy_clk_reset(motg);
+ ret = pdata->phy_clk_reset(motg->phy_reset_clk);
if (ret)
return ret;
- ret = msm_otg_link_clk_reset(motg, 0);
+ ret = pdata->phy_link_clk_reset(motg->clk, false);
if (ret)
return ret;
@@ -362,7 +329,7 @@ static int msm_otg_phy_reset(struct msm_otg *motg)
ULPI_CLR(ULPI_FUNC_CTRL));
if (!ret)
break;
- ret = msm_otg_phy_clk_reset(motg);
+ ret = pdata->phy_clk_reset(motg->phy_reset_clk);
if (ret)
return ret;
}
@@ -370,7 +337,7 @@ static int msm_otg_phy_reset(struct msm_otg *motg)
return -ETIMEDOUT;
/* This reset calibrates the phy, if the above write succeeded */
- ret = msm_otg_phy_clk_reset(motg);
+ ret = pdata->phy_clk_reset(motg->phy_reset_clk);
if (ret)
return ret;
@@ -378,7 +345,7 @@ static int msm_otg_phy_reset(struct msm_otg *motg)
ret = ulpi_read(&motg->phy, ULPI_DEBUG);
if (ret != -ETIMEDOUT)
break;
- ret = msm_otg_phy_clk_reset(motg);
+ ret = pdata->phy_clk_reset(motg->phy_reset_clk);
if (ret)
return ret;
}
@@ -1414,16 +1381,22 @@ static void msm_otg_debugfs_cleanup(void)
static int __init msm_otg_probe(struct platform_device *pdev)
{
int ret = 0;
+ struct msm_otg_platform_data *pdata = pdev->dev.platform_data;
struct resource *res;
struct msm_otg *motg;
struct usb_phy *phy;
dev_info(&pdev->dev, "msm_otg probe\n");
- if (!pdev->dev.platform_data) {
+ if (!pdata) {
dev_err(&pdev->dev, "No platform data given. Bailing out\n");
return -ENODEV;
}
+ if (!pdata->phy_clk_reset || !pdata->phy_link_clk_reset) {
+ dev_err(&pdev->dev, "No phy or link clock reset methods\n");
+ return -ENODEV;
+ }
+
motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL);
if (!motg) {
dev_err(&pdev->dev, "unable to allocate msm_otg\n");
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 22a396c..66081ed 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -135,6 +135,8 @@ struct msm_otg_platform_data {
enum msm_usb_phy_type phy_type;
void (*setup_gpio)(enum usb_otg_state state);
char *pclk_src_name;
+ int (*phy_link_clk_reset)(struct clk *link_clk, bool assert);
+ int (*phy_clk_reset)(struct clk *phy_clk);
};
/**
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists