| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAD=GYpbJB6=cXisf8ovknE-nAOZm4fi57vsJLbdTy=82RQQstg@mail.gmail.com>
Date: Fri, 21 Jun 2013 08:37:57 -0500
From: Joel A Fernandes <agnel.joel@...il.com>
To: Sekhar Nori <nsekhar@...com>
Cc: Joel A Fernandes <joelagnel@...com>,
Tony Lindgren <tony@...mide.com>,
Matt Porter <matt@...orter.com>,
Grant Likely <grant.likely@...retlab.ca>,
Rob Herring <rob.herring@...xeda.com>,
Vinod Koul <vinod.koul@...el.com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Benoit Cousson <b-cousson@...com>,
Russell King <linux@....linux.org.uk>,
Rob Landley <rob@...dley.net>,
Andrew Morton <akpm@...ux-foundation.org>,
Jason Kridner <jkridner@...gleboard.org>,
Koen Kooi <koen@...gleboard.org>,
Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
Linux OMAP List <linux-omap@...r.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
Linux DaVinci Kernel List
<davinci-linux-open-source@...ux.davincidsp.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux Documentation List <linux-doc@...r.kernel.org>,
Linux MMC List <linux-mmc@...r.kernel.org>,
Linux SPI Devel List
<spi-devel-general@...ts.sourceforge.net>,
Arnd Bergmann <arnd@...db.de>
Subject: Re: [PATCH v12 02/11] ARM: edma: Add DT and runtime PM support to the
private EDMA API
On Fri, Jun 21, 2013 at 4:37 AM, Sekhar Nori <nsekhar@...com> wrote:
> Joel,
>
> Looks like you have not addressed all comments from last time.
> For now, in the interest of time, I have fixed them myself. But next
> time on, if you are not going to fix any comment, then please reply
> upfront before sending out *any* new versions.
Will do. I thought there was just 1 other disagreement. Neverthless
I will make it a point to reply upfront next time.
> Also, *please* run checkpatch and fix all build warnings before you send
> the patch out. You seem to have introduced new checkpatch errors and
> compile warnings with this version.
Ok, this really sucks. Somehow I missed the new checkpatch error.
Thanks for fixing it & Sorry.
Joel
> On 6/21/2013 2:36 AM, Joel A Fernandes wrote:
>> From: Matt Porter <mporter@...com>
>>
>> Adds support for parsing the TI EDMA DT data into the required EDMA
>> private API platform data. Enables runtime PM support to initialize
>> the EDMA hwmod. Enables build on OMAP.
>>
>> Changes by Joel:
>> * Setup default one-to-one mapping for queue_priority and queue_tc
>> mapping as discussed in [1].
>> * Split out xbar stuff to separate patch. [1]
>> * Dropped unused DT helper to convert to array
>>
>> [1] https://patchwork.kernel.org/patch/2226761/
>>
>> Signed-off-by: Matt Porter <mporter@...com>
>> Acked-by: Sekhar Nori <nsekhar@...com>
>> Signed-off-by: Joel A Fernandes <joelagnel@...com>
>> ---
>> arch/arm/common/edma.c | 180 +++++++++++++++++++++++++++++++++---
>> include/linux/platform_data/edma.h | 4 +-
>> 2 files changed, 169 insertions(+), 15 deletions(-)
>>
>> diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
>> index 7658874..407e01e 100644
>> --- a/arch/arm/common/edma.c
>> +++ b/arch/arm/common/edma.c
>> @@ -25,6 +25,13 @@
>> #include <linux/platform_device.h>
>> #include <linux/io.h>
>> #include <linux/slab.h>
>> +#include <linux/edma.h>
>> +#include <linux/err.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_dma.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/pm_runtime.h>
>>
>> #include <linux/platform_data/edma.h>
>>
>> @@ -1369,13 +1376,102 @@ void edma_clear_event(unsigned channel)
>> }
>> EXPORT_SYMBOL(edma_clear_event);
>>
>> -/*-----------------------------------------------------------------------*/
>> +static int edma_of_read_u32_to_s16_array(const struct device_node *np,
>> + const char *propname, s16 *out_values,
>> + size_t sz)
>> +{
>> + int ret;
>> +
>> + ret = of_property_read_u16_array(np, propname, out_values, sz);
>> + if (ret)
>> + return ret;
>> +
>> + /* Terminate it */
>> + *out_values++ = -1;
>> + *out_values++ = -1;
>> +
>> + return 0;
>> +}
>
> I asked you to get rid of unused functions last time around. This
> function is unused here.
>
>> +
>> +static int edma_of_parse_dt(struct device *dev,
>> + struct device_node *node,
>> + struct edma_soc_info *pdata)
>> +{
>> + int ret = 0, i;
>> + u32 value;
>> + struct property *prop;
>> + size_t sz;
>
> sz and prop are not used in this function and result in unused variable
> warnings.
>
>> + struct edma_rsv_info *rsv_info;
>> + s8 (*queue_tc_map)[2], (*queue_priority_map)[2];
>> +
>> + memset(pdata, 0, sizeof(struct edma_soc_info));
>> +
>> + ret = of_property_read_u32(node, "dma-channels", &value);
>> + if (ret < 0)
>> + return ret;
>> + pdata->n_channel = value;
>> +
>> + ret = of_property_read_u32(node, "ti,edma-regions", &value);
>> + if (ret < 0)
>> + return ret;
>> + pdata->n_region = value;
>> +
>> + ret = of_property_read_u32(node, "ti,edma-slots", &value);
>> + if (ret < 0)
>> + return ret;
>> + pdata->n_slot = value;
>> +
>> + pdata->n_cc = 1;
>> + pdata->n_tc = 3;
>
> n_tc setting is not used in driver as I mentioned last time. I dropped
> this line.
>
>> +
>> + rsv_info =
>> + devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
>> + if (!rsv_info)
>> + return -ENOMEM;
>> + pdata->rsv = rsv_info;
>> +
>> + queue_tc_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
>> + if (!queue_tc_map)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < 3; i++) {
>> + queue_tc_map[i][0] = i;
>> + queue_tc_map[i][1] = i;
>> + }
>> + queue_tc_map[i][0] = -1;
>> + queue_tc_map[i][1] = -1;
>> +
>> + pdata->queue_tc_mapping = queue_tc_map;
>> +
>> + queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL);
>> + if (!queue_priority_map)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < 3; i++) {
>> + queue_priority_map[i][0] = i;
>> + queue_priority_map[i][1] = i;
>> + }
>> + queue_priority_map[i][0] = -1;
>> + queue_priority_map[i][1] = -1;
>> +
>> + pdata->queue_priority_mapping = queue_priority_map;
>> +
>> + pdata->default_queue = 0;
>> +
>> + return ret;
>> +}
>> +
>> +static struct of_dma_filter_info edma_filter_info = {
>> + .filter_fn = edma_filter_fn,
>> +};
>>
>> -static int __init edma_probe(struct platform_device *pdev)
>> +static int edma_probe(struct platform_device *pdev)
>> {
>> struct edma_soc_info **info = pdev->dev.platform_data;
>> - const s8 (*queue_priority_mapping)[2];
>> - const s8 (*queue_tc_mapping)[2];
>> + struct edma_soc_info *ninfo[EDMA_MAX_CC] = {NULL};
>> + struct edma_soc_info tmpinfo;
>> + s8 (*queue_priority_mapping)[2];
>> + s8 (*queue_tc_mapping)[2];
>> int i, j, off, ln, found = 0;
>> int status = -1;
>> const s16 (*rsv_chans)[2];
>> @@ -1383,17 +1479,56 @@ static int __init edma_probe(struct platform_device *pdev)
>> int irq[EDMA_MAX_CC] = {0, 0};
>> int err_irq[EDMA_MAX_CC] = {0, 0};
>> struct resource *r[EDMA_MAX_CC] = {NULL};
>> + struct resource res[EDMA_MAX_CC];
>> char res_name[10];
>> char irq_name[10];
>> + struct device_node *node = pdev->dev.of_node;
>> + struct device *dev = &pdev->dev;
>> + int ret;
>> +
>> + if (node) {
>> + /* Check if this is a second instance registered */
>> + if (arch_num_cc) {
>> + dev_err(dev, "only one EDMA instance is supported via DT\n");
>> + return -ENODEV;
>> + }
>> + info = ninfo;
>> + edma_of_parse_dt(dev, node, &tmpinfo);
>
> As I mentioned last time, this potentially leaks memory since you need
> to return error for the memory allocated through devres APIs to get freed.
>
>> + info[0] = &tmpinfo;
>> +
>> + dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
>> + of_dma_controller_register(dev->of_node,
>> + of_dma_simple_xlate,
>> + &edma_filter_info);
>
> It turns out this patch fails to build if CONFIG_DMADEVICES is not
> enabled. I fixed that in my version. And no, forcing DMADEVICES to be
> on all the time is not right. More on that later.
>
>> + }
>>
>> if (!info)
>> return -ENODEV;
>>
>> + pm_runtime_enable(dev);
>> + ret = pm_runtime_get_sync(dev);
>> + if (ret < 0) {
>> + dev_err(dev, "pm_runtime_get_sync() failed\n");
>> + return ret;
>> + }
>> +
>> for (j = 0; j < EDMA_MAX_CC; j++) {
>> - sprintf(res_name, "edma_cc%d", j);
>> - r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>> + if (!info[j]) {
>> + if (!found)
>> + return -ENODEV;
>> + break;
>> + }
>> + if (node) {
>> + ret = of_address_to_resource(node, j, &res[j]);
>> + if (!ret)
>> + r[j] = &res[j];
>> + } else {
>> + sprintf(res_name, "edma_cc%d", j);
>> + r[j] = platform_get_resource_byname(pdev,
>> + IORESOURCE_MEM,
>> res_name);
>> - if (!r[j] || !info[j]) {
>> + }
>> + if (!r[j]) {
>> if (found)
>> break;
>> else
>> @@ -1440,7 +1575,7 @@ static int __init edma_probe(struct platform_device *pdev)
>> off = rsv_chans[i][0];
>> ln = rsv_chans[i][1];
>> clear_bits(off, ln,
>> - edma_cc[j]->edma_unused);
>> + edma_cc[j]->edma_unused);
>> }
>> }
>>
>> @@ -1456,8 +1591,14 @@ static int __init edma_probe(struct platform_device *pdev)
>> }
>> }
>>
>> - sprintf(irq_name, "edma%d", j);
>> - irq[j] = platform_get_irq_byname(pdev, irq_name);
>> +
>> + if (node) {
>> + irq[j] = irq_of_parse_and_map(node, 0);
>> + }
>> + else {
>> + sprintf(irq_name, "edma%d", j);
>> + irq[j] = platform_get_irq_byname(pdev, irq_name);
>> + }
>
> You ended up introducing checkpatch error here..
>
>> edma_cc[j]->irq_res_start = irq[j];
>> status = devm_request_irq(&pdev->dev, irq[j],
>> dma_irq_handler, 0, "edma",
>> @@ -1469,8 +1610,13 @@ static int __init edma_probe(struct platform_device *pdev)
>> return status;
>> }
>>
>> - sprintf(irq_name, "edma%d_err", j);
>> - err_irq[j] = platform_get_irq_byname(pdev, irq_name);
>> + if (node) {
>> + err_irq[j] = irq_of_parse_and_map(node, 2);
>> + }
>> + else {
>> + sprintf(irq_name, "edma%d_err", j);
>> + err_irq[j] = platform_get_irq_byname(pdev, irq_name);
>> + }
>
> .. and here.
>
>> edma_cc[j]->irq_res_end = err_irq[j];
>> status = devm_request_irq(&pdev->dev, err_irq[j],
>> dma_ccerr_handler, 0,
>> @@ -1516,9 +1662,17 @@ static int __init edma_probe(struct platform_device *pdev)
>> return 0;
>> }
>>
>> +static const struct of_device_id edma_of_ids[] = {
>> + { .compatible = "ti,edma3", },
>> + {}
>> +};
>>
>> static struct platform_driver edma_driver = {
>> - .driver.name = "edma",
>> + .driver = {
>> + .name = "edma",
>> + .of_match_table = edma_of_ids,
>> + },
>> + .probe = edma_probe,
>> };
>>
>> static int __init edma_init(void)
>> diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
>> index 2344ea2..317f2be 100644
>> --- a/include/linux/platform_data/edma.h
>> +++ b/include/linux/platform_data/edma.h
>> @@ -175,8 +175,8 @@ struct edma_soc_info {
>> /* Resource reservation for other cores */
>> struct edma_rsv_info *rsv;
>>
>> - const s8 (*queue_tc_mapping)[2];
>> - const s8 (*queue_priority_mapping)[2];
>> + s8 (*queue_tc_mapping)[2];
>> + s8 (*queue_priority_mapping)[2];
>
> So the warnings/errors introduced in this patch must be fixed in this
> patch only. I merged your 07/11 into this. But that does not solve all
> the problems since you ignored non-DA8XX platforms. I fixed those.
>
> Also, Arnd acked the whole series so I added his ack to this.
>
> I have tested the updated on non-DT DM644x board. That means a large
> part of the patch is actually untested. Can you please test it and let
> me know it works? I will sent the patch as a reply to this mail.
>
> Thanks,
> Sekhar
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists