lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20130621184921.GA26008@lukather>
Date:	Fri, 21 Jun 2013 20:49:21 +0200
From:	Maxime Ripard <maxime.ripard@...e-electrons.com>
To:	Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Cc:	linux-fbdev@...r.kernel.org,
	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>,
	jimwall@...om, brian@...stalfontz.com,
	linux-kernel@...r.kernel.org, Richard Purdie <rpurdie@...ys.net>,
	Florian Tobias Schandinat <FlorianSchandinat@....de>
Subject: Re: [PATCH 2/2] fb: backlight: HX8357: Add HX8369 support

Hi Alex,

On Fri, Jun 21, 2013 at 08:27:39PM +0200, Alexandre Belloni wrote:
> Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
> ---
>  drivers/video/backlight/hx8357.c | 183 +++++++++++++++++++++++++++++++++++++--
>  1 file changed, 175 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
> index 69f5672..b1c4042 100644
> --- a/drivers/video/backlight/hx8357.c
> +++ b/drivers/video/backlight/hx8357.c
> @@ -71,6 +71,18 @@
>  #define HX8357_SET_POWER_NORMAL		0xd2
>  #define HX8357_SET_PANEL_RELATED	0xe9
>  
> +#define HX8369_SET_DISPLAY_BRIGHTNESS		0x51
> +#define HX8369_WRITE_CABC_DISPLAY_VALUE		0x53
> +#define HX8369_WRITE_CABC_BRIGHT_CTRL		0x55
> +#define HX8369_WRITE_CABC_MIN_BRIGHTNESS	0x5e
> +#define HX8369_SET_POWER			0xb1
> +#define HX8369_SET_DISPLAY_MODE			0xb2
> +#define HX8369_SET_DISPLAY_WAVEFORM_CYC		0xb4
> +#define HX8369_SET_VCOM				0xb6
> +#define HX8369_SET_EXTENSION_COMMAND		0xb9
> +#define HX8369_SET_GIP				0xd5
> +#define HX8369_SET_GAMMA_CURVE_RELATED		0xe0
> +
>  struct hx8357_data {
>  	unsigned		im_pins[HX8357_NUM_IM_PINS];
>  	unsigned		reset;
> @@ -144,6 +156,61 @@ static u8 hx8357_seq_display_mode[] = {
>  	HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
>  };
>  
> +static u8 hx8369_seq_write_CABC_min_brightness[] = {
> +	HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
> +};
> +
> +static u8 hx8369_seq_write_CABC_control[] = {
> +	HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
> +};
> +
> +static u8 hx8369_seq_set_display_brightness[] = {
> +	HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
> +};
> +
> +static u8 hx8369_seq_write_CABC_control_setting[] = {
> +	HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
> +};
> +
> +static u8 hx8369_seq_extension_command[] = {
> +	HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
> +};
> +
> +static u8 hx8369_seq_display_related[] = {
> +	HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
> +	0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00,	0x01,
> +};
> +
> +static u8 hx8369_seq_panel_waveform_cycle[] = {
> +	HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
> +};
> +
> +static u8 hx8369_seq_set_address_mode[] = {
> +	HX8357_SET_ADDRESS_MODE, 0x00,
> +};
> +
> +static u8 hx8369_seq_vcom[] = {
> +	HX8369_SET_VCOM, 0x3e, 0x3e,
> +};
> +
> +static u8 hx8369_seq_gip[] = {
> +	HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
> +	0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
> +	0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
> +};
> +
> +static u8 hx8369_seq_power[] = {
> +	HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
> +	0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
> +};
> +
> +static u8 hx8369_seq_gamma_curve_related[] = {
> +	HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
> +	0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
> +	0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
> +	0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
> +};
> +
>  static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
>  				u8 *txbuf, u16 txlen,
>  				u8 *rxbuf, u16 rxlen)
> @@ -242,6 +309,16 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
>  	return 0;
>  }
>  
> +static void hx8357_lcd_reset(struct hx8357_data *lcd)
> +{
> +	gpio_set_value(lcd->reset, 1);
> +	usleep_range(10000, 12000);
> +	gpio_set_value(lcd->reset, 0);
> +	usleep_range(10000, 12000);
> +	gpio_set_value(lcd->reset, 1);
> +	msleep(120);
> +}

We should probably use the new reset framework here, especially
reset-gpio (I'm not sure what's the current status of the patch though).

> +
>  static int hx8357_lcd_init(struct lcd_device *lcdev)
>  {
>  	struct hx8357_data *lcd = lcd_get_data(lcdev);
> @@ -257,13 +334,7 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
>  		gpio_set_value_cansleep(lcd->im_pins[2], 1);
>  	}
>  
> -	/* Reset the screen */
> -	gpio_set_value(lcd->reset, 1);
> -	usleep_range(10000, 12000);
> -	gpio_set_value(lcd->reset, 0);
> -	usleep_range(10000, 12000);
> -	gpio_set_value(lcd->reset, 1);
> -	msleep(120);
> +	hx8357_lcd_reset(lcd);

And that would become reset_device_reset

>  	ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
>  				ARRAY_SIZE(hx8357_seq_power));
> @@ -359,6 +430,97 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
>  	return 0;
>  }
>  
> +static int hx8369_lcd_init(struct lcd_device *lcdev)
> +{
> +	struct hx8357_data *lcd = lcd_get_data(lcdev);
> +	int ret;
> +
> +	hx8357_lcd_reset(lcd);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
> +				ARRAY_SIZE(hx8369_seq_extension_command));
> +	if (ret < 0)
> +		return ret;
> +	usleep_range(10000, 12000);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
> +				ARRAY_SIZE(hx8369_seq_display_related));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
> +				ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
> +				ARRAY_SIZE(hx8369_seq_set_address_mode));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
> +				ARRAY_SIZE(hx8369_seq_vcom));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
> +				ARRAY_SIZE(hx8369_seq_gip));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
> +				ARRAY_SIZE(hx8369_seq_power));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
> +	if (ret < 0)
> +		return ret;
> +
> +	msleep(120);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
> +				ARRAY_SIZE(hx8369_seq_gamma_curve_related));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
> +	if (ret < 0)
> +		return ret;
> +	usleep_range(1000, 1200);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
> +				ARRAY_SIZE(hx8369_seq_write_CABC_control));
> +	if (ret < 0)
> +		return ret;
> +	usleep_range(10000, 12000);
> +
> +	ret = hx8357_spi_write_array(lcdev,
> +			hx8369_seq_write_CABC_control_setting,
> +			ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_array(lcdev,
> +			hx8369_seq_write_CABC_min_brightness,
> +			ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
> +	if (ret < 0)
> +		return ret;
> +	usleep_range(10000, 12000);
> +
> +	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
> +				ARRAY_SIZE(hx8369_seq_set_display_brightness));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
> +	if (ret < 0)
> +		return ret;
> +	msleep(100);
> +
> +	return 0;
> +}
> +
>  #define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
>  
>  static int hx8357_set_power(struct lcd_device *lcdev, int power)
> @@ -461,7 +623,11 @@ static int hx8357_probe(struct spi_device *spi)
>  	}
>  	spi_set_drvdata(spi, lcdev);
>  
> -	ret = hx8357_lcd_init(lcdev);
> +	ret = -ENODEV;
> +	if (of_device_is_compatible(spi->dev.of_node, "himax,hx8357"))
> +		ret = hx8357_lcd_init(lcdev);
> +	else if (of_device_is_compatible(spi->dev.of_node, "himax,hx8369"))
> +		ret = hx8369_lcd_init(lcdev);
>  	if (ret) {
>  		dev_err(&spi->dev, "Couldn't initialize panel\n");
>  		goto init_error;
> @@ -486,6 +652,7 @@ static int hx8357_remove(struct spi_device *spi)
>  
>  static const struct of_device_id hx8357_dt_ids[] = {
>  	{ .compatible = "himax,hx8357" },
> +	{ .compatible = "himax,hx8369" },

Maybe you could use the .data field and of_match_device here.

>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
> -- 
> 1.8.1.2
> 

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Download attachment "signature.asc" of type "application/pgp-signature" (837 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ