| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <51C875E0.7050702@ti.com>
Date: Mon, 24 Jun 2013 12:37:52 -0400
From: Eduardo Valentin <eduardo.valentin@...com>
To: Amit Daniel Kachhap <amit.daniel@...sung.com>
CC: <linux-pm@...r.kernel.org>, Zhang Rui <rui.zhang@...el.com>,
Eduardo Valentin <eduardo.valentin@...com>,
<linux-samsung-soc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <amit.kachhap@...il.com>,
Kukjin Kim <kgene.kim@...sung.com>
Subject: Re: [PATCH V7 23/30] thermal: exynos: Add thermal configuration data
for exynos5440 TMU sensor
On 24-06-2013 06:50, Amit Daniel Kachhap wrote:
> This patch adds configuration data for exynos5440 soc. Also register
> definations for the controller are added.
>
> Acked-by: Jonghwa Lee <jonghwa3.lee@...sung.com>
> Acked-by: Kukjin Kim <kgene.kim@...sung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@...sung.com>
Acked-by: Eduardo Valentin <eduardo.valentin@...com>
> ---
> drivers/thermal/samsung/exynos_tmu.c | 4 ++
> drivers/thermal/samsung/exynos_tmu_data.c | 71 +++++++++++++++++++++++++++++
> drivers/thermal/samsung/exynos_tmu_data.h | 7 +++
> 3 files changed, 82 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 6bc86f6..651f460 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -456,6 +456,10 @@ static const struct of_device_id exynos_tmu_match[] = {
> .compatible = "samsung,exynos5250-tmu",
> .data = (void *)EXYNOS5250_TMU_DRV_DATA,
> },
> + {
> + .compatible = "samsung,exynos5440-tmu",
> + .data = (void *)EXYNOS5440_TMU_DRV_DATA,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, exynos_tmu_match);
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
> index 2612b45..5952915 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.c
> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
> @@ -175,3 +175,74 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
> .tmu_count = 1,
> };
> #endif
> +
> +#if defined(CONFIG_SOC_EXYNOS5440)
> +static const struct exynos_tmu_registers exynos5440_tmu_registers = {
> + .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
> + .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
> + .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
> + .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
> + .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
> + .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
> + .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
> + .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
> + .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
> + .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
> + .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
> + .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
> + .tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
> + .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
> + .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
> + .threshold_th1 = EXYNOS5440_TMU_S0_7_TH1,
> + .threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
> + .threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT,
> + .tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
> + .inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
> + .inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
> + .inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
> + .inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
> + .inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
> + .inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
> + .inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
> + .inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT,
> + .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
> + .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
> + .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
> + .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
> + .emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
> + .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
> + .tmu_pmin = EXYNOS5440_TMU_PMIN,
> +};
> +
> +#define EXYNOS5440_TMU_DATA \
> + .trigger_levels[0] = 100, \
> + .trigger_levels[4] = 105, \
> + .trigger_enable[0] = 1, \
> + .trigger_type[0] = SW_TRIP, \
> + .trigger_type[4] = HW_TRIP, \
> + .max_trigger_level = 5, \
> + .gain = 5, \
> + .reference_voltage = 16, \
> + .noise_cancel_mode = 4, \
> + .cal_type = TYPE_ONE_POINT_TRIMMING, \
> + .cal_mode = 0, \
> + .efuse_value = 0x5b2d, \
> + .min_efuse_value = 16, \
> + .max_efuse_value = 76, \
> + .first_point_trim = 25, \
> + .second_point_trim = 70, \
> + .default_temp_offset = 25, \
> + .type = SOC_ARCH_EXYNOS5440, \
> + .registers = &exynos5440_tmu_registers, \
> + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
> + TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_SHARED_MEMORY),
> +
> +struct exynos_tmu_init_data const exynos5440_default_tmu_data = {
> + .tmu_data = {
> + { EXYNOS5440_TMU_DATA } ,
> + { EXYNOS5440_TMU_DATA } ,
> + { EXYNOS5440_TMU_DATA } ,
> + },
> + .tmu_count = 3,
> +};
> +#endif
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
> index ad263e9..43ce5fb 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> @@ -143,4 +143,11 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
> #define EXYNOS5250_TMU_DRV_DATA (NULL)
> #endif
>
> +#if defined(CONFIG_SOC_EXYNOS5440)
> +extern struct exynos_tmu_init_data const exynos5440_default_tmu_data;
> +#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)
> +#else
> +#define EXYNOS5440_TMU_DRV_DATA (NULL)
> +#endif
> +
> #endif /*_EXYNOS_TMU_DATA_H*/
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
Download attachment "signature.asc" of type "application/pgp-signature" (296 bytes)
Powered by blists - more mailing lists