linux-kernel - [PATCHv3 0/3] Add support for the Nuvoton NAU7802 ADC to the cfa10049

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1372094699-3832-1-git-send-email-alexandre.belloni@free-electrons.com>
Date:	Mon, 24 Jun 2013 19:24:56 +0200
From:	Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To:	Shawn Guo <shawn.guo@...aro.org>,
	Jonathan Cameron <jic23@....ac.uk>
Cc:	jimwall@...om, brian@...stalfontz.com,
	Maxime Ripard <maxime.ripard@...e-electrons.com>,
	linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-doc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	devicetree-discuss@...ts.ozlabs.org, Rob Landley <rob@...dley.net>,
	Rob Herring <rob.herring@...xeda.com>,
	Grant Likely <grant.likely@...retlab.ca>,
	Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: [PATCHv3 0/3] Add support for the Nuvoton NAU7802 ADC to the cfa10049

Hi,

This is v3 of the patchset that adds support for the 3 Nuvoton NAU7802 ADCs
present on the CFA-10049 board from Crystalfontz. The first patch adds the
driver, the next ones are adding them in the DT after switching the second i2c
bus to bitbanging following a lot of timeout issues we have on that bus.

Changes in v3:
 - removed the min_conversion knob in sysfs, it is now hardcoded to 6
 - added error checking in probe
 - corrected error checking
 - corrected possibly uninitialized vldo
 - used ARRAY_SIZE(nau7802_chan_array) instead of 2
 - added that vldo refers to the internal voltage regulator

Changes in v2:
 - channels are now statically allocated
 - no wrappers around i2c functions
 - sampling_freq is a shared attribute
 - setting gain is done through scale
 - cosmetics changes (s/idev/indio_dev/, blank lines before returns)
 - use of sign_extend32 to extend the sign
 - reading scale now returns IIO_VAL_FRACTIONAL_LOG2
 - no dt lookup for interrupts, this is done in of_i2c.c but that was mask due
 to a bug.

what I didn't address is setting the external reference voltage through a fixed
regulator and I kept the vldo attribute to set the internal voltage reference in
the DT as Jonathan seemed to be ok with that. If anybody is using a nau7802 with
an external reference, it will still be time to add the fixed regulator. It
shouldn't be difficult but I don't have any hardware to test.

Regards,

Alexandre Belloni (1):
  iio: Add Nuvoton NAU7802 ADC driver

Maxime Ripard (2):
  ARM: mxs: cfa10049: Switch bus i2c1 to bitbanging
  ARM: mxs: cfa10049: Add NAU7802 ADCs to the device tree

 .../bindings/iio/adc/nuvoton-nau7802.txt           |  18 +
 arch/arm/boot/dts/imx28-cfa10049.dts               | 126 +++--
 drivers/iio/adc/Kconfig                            |   9 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/nau7802.c                          | 576 +++++++++++++++++++++
 5 files changed, 687 insertions(+), 43 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt
 create mode 100644 drivers/iio/adc/nau7802.c

-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/