[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAKMK7uGPeAXmm21KCK4ZfqrynykyKCjn5dZVTsBheQ4JnaoW=A@mail.gmail.com>
Date: Mon, 24 Jun 2013 20:26:18 +0200
From: Daniel Vetter <daniel@...ll.ch>
To: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>
Cc: dri-devel <dri-devel@...ts.freedesktop.org>,
Chris Wilson <chris@...is-wilson.co.uk>,
Imre Deak <imre.deak@...el.com>,
Dave Airlie <airlied@...ux.ie>,
Dave Airlie <airlied@...il.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] drm/i915: make compact dma scatter lists creation work
with SWIOTLB backend.
On Mon, Jun 24, 2013 at 7:32 PM, Konrad Rzeszutek Wilk
<konrad.wilk@...cle.com> wrote:
> On Mon, Jun 24, 2013 at 07:09:12PM +0200, Daniel Vetter wrote:
>> On Mon, Jun 24, 2013 at 11:47:48AM -0400, Konrad Rzeszutek Wilk wrote:
>> > Git commit 90797e6d1ec0dfde6ba62a48b9ee3803887d6ed4
>> > ("drm/i915: create compact dma scatter lists for gem objects") makes
>> > certain assumptions about the under laying DMA API that are not always
>> > correct.
>> >
>> > On a ThinkPad X230 with an Intel HD 4000 with Xen during the bootup
>> > I see:
>> >
>> > [drm:intel_pipe_set_base] *ERROR* pin & fence failed
>> > [drm:intel_crtc_set_config] *ERROR* failed to set mode on [CRTC:3], err = -28
>> >
>> > Bit of debugging traced it down to dma_map_sg failing (in
>> > i915_gem_gtt_prepare_object) as some of the SG entries were huge (3MB).
>> >
>> > That unfortunately are sizes that the SWIOTLB is incapable of handling -
>> > the maximum it can handle is a an entry of 512KB of virtual contiguous
>> > memory for its bounce buffer. (See IO_TLB_SEGSIZE).
>> >
>> > Previous to the above mention git commit the SG entries were of 4KB, and
>> > the code introduced by above git commit squashed the CPU contiguous PFNs
>> > in one big virtual address provided to DMA API.
>> >
>> > This patch is a simple semi-revert - were we emulate the old behavior
>> > if we detect that SWIOTLB is online. If it is not online then we continue
>> > on with the new compact scatter gather mechanism.
>> >
>> > An alternative solution would be for the the '.get_pages' and the
>> > i915_gem_gtt_prepare_object to retry with smaller max gap of the
>> > amount of PFNs that can be combined together - but with this issue
>> > discovered during rc7 that might be too risky.
>> >
>> > Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>
>> > CC: Chris Wilson <chris@...is-wilson.co.uk>
>> > CC: Imre Deak <imre.deak@...el.com>
>> > CC: Daniel Vetter <daniel.vetter@...ll.ch>
>> > CC: David Airlie <airlied@...ux.ie>
>> > CC: <dri-devel@...ts.freedesktop.org>
>> > Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>
>>
>> Two things:
>
> Hey Daniel,
>
>>
>> - SWIOTLB usage should seriously blow up all over the place in drm/i915.
>> We really rely on the everywhere else true fact that the pages and their
>> dma mapping point at the same backing storage.
>
> It works. As in, it seems to work for just a normal desktop user. I don't
> see much of dma_sync_* sprinkled around the drm/i915 so I would think that
> there are some issues would be hit as well - but at the first glance
> when using it on a laptop it looks OK.
Yeah, we have a pretty serious case of "roll our own coherency stuff".
The biggest reason is that for a long time i915.ko didn't care one bit
about iommus, and the thing we care about (flushing cpu caches for
dma) isn't supported on x86 since x86 every dma is coherent (well, not
quite, but we don't have support for it). I think longer-term it would
make sense to move the clfushing we're doing into the dma layer.
>> - How is this solved elsewhere when constructing sg tables? Or are we
>> really the only guys who try to construct such big sg entries? I
>> expected somewhat that the dma mapping backed would fill in the segment
>> limits accordingly, but I haven't found anything really on a quick
>> search.
>
> The TTM layer (so radeon, nouveau) uses pci_alloc_coherent which will
> construct the dma mapped pages. That allows it to construct "SWIOTLB-approved"
> pages that won't need to go through dma_map/dma_unmap as they are
> already mapped and ready to go.
>
> Coming back to your question - I think that i915 is the one that I've
> encountered.
That's a bit surprising. With dma_buf graphics people will use sg
tables much more (there's even a nice sg_alloc_table_from_pages helper
to construct them), and those sg tables tend to have large segments. I
guess we need some more generic solution here ...
For now I guess we can live with your CONFIG_SWIOTLB hack.
-Daniel
>>
>>
>> Cheers, Daniel
>>
>> > ---
>> > drivers/gpu/drm/i915/i915_gem.c | 15 ++++++++++++---
>> > 1 file changed, 12 insertions(+), 3 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
>> > index 970ad17..7045f45 100644
>> > --- a/drivers/gpu/drm/i915/i915_gem.c
>> > +++ b/drivers/gpu/drm/i915/i915_gem.c
>> > @@ -1801,7 +1801,14 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj)
>> > gfp |= __GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD;
>> > gfp &= ~(__GFP_IO | __GFP_WAIT);
>> > }
>> > -
>> > +#ifdef CONFIG_SWIOTLB
>> > + if (swiotlb_nr_tbl()) {
>> > + st->nents++;
>> > + sg_set_page(sg, page, PAGE_SIZE, 0);
>> > + sg = sg_next(sg);
>> > + continue;
>> > + }
>> > +#endif
>> > if (!i || page_to_pfn(page) != last_pfn + 1) {
>> > if (i)
>> > sg = sg_next(sg);
>> > @@ -1812,8 +1819,10 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj)
>> > }
>> > last_pfn = page_to_pfn(page);
>> > }
>> > -
>> > - sg_mark_end(sg);
>> > +#ifdef CONFIG_SWIOTLB
>> > + if (!swiotlb_nr_tbl())
>> > +#endif
>> > + sg_mark_end(sg);
>> > obj->pages = st;
>> >
>> > if (i915_gem_object_needs_bit17_swizzle(obj))
>> > --
>> > 1.8.1.4
>> >
>>
>> --
>> Daniel Vetter
>> Software Engineer, Intel Corporation
>> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists