| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1372159970-6361-1-git-send-email-ruslan.bilovol@ti.com>
Date: Tue, 25 Jun 2013 14:32:50 +0300
From: Ruslan Bilovol <ruslan.bilovol@...com>
To: b-cousson@...com, tony@...mide.com
Cc: benoit.cousson@...aro.org, linux-kernel@...r.kernel.org,
linux-omap@...r.kernel.org, devicetree-discuss@...ts.ozlabs.org
Subject: [PATCH v2] ARM: DTS: OMAP4: Add OMAP4 Blaze Tablet support
The OMAP4 Blaze Tablet is TI OMAP4 processor-based
development platform in a tablet formfactor.
The platform contains many of the features found in
present-day handsets (such as audio, video, wireless
functions and user interfaces) and in addition
contains features for software development and test.
This patch adds initial support for the OMAP4 Blaze
Tablet development platform. Additional functionality
depends on different drivers and code modifications that
are not upstreamed yet or do not support DT yet, so will
be added later.
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@...com>
---
v2:
- Rebased onto 'for_3.11/dts' branch of bcousson/linux-omap-dt tree
- Bound more hardware and picked up updates from omap4-sdp
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/omap4-blazetablet.dts | 483 +++++++++++++++++++++++++++++++
2 files changed, 484 insertions(+)
create mode 100644 arch/arm/boot/dts/omap4-blazetablet.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05da469..4fafde1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -150,6 +150,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap4-var-som.dtb \
omap4-sdp.dtb \
omap4-sdp-es23plus.dtb \
+ omap4-blazetablet.dtb \
omap5-uevm.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
diff --git a/arch/arm/boot/dts/omap4-blazetablet.dts b/arch/arm/boot/dts/omap4-blazetablet.dts
new file mode 100644
index 0000000..07f40b6
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-blazetablet.dts
@@ -0,0 +1,483 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Ruslan Bilovol <ruslan.bilovol@...com>
+ *
+ * based on omap4-sdp.dts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+#include "elpida_ecb240abacn.dtsi"
+
+/ {
+ model = "TI OMAP4 Blaze Tablet";
+ compatible = "ti,omap4-blazetablet", "ti,omap4430", "ti,omap4";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ vdd_eth: fixedregulator-vdd-eth {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_ETH";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 16 0>; /* gpio line 48 */
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ vbat: fixedregulator-vbat {
+ compatible = "regulator-fixed";
+ regulator-name = "VBAT";
+ regulator-min-microvolt = <3750000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-boot-on;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ volume_up {
+ label = "volume-up";
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* 43 */
+ gpio-key,wakeup;
+ };
+
+ home {
+ label = "home";
+ linux,code = <102>; /* KEY_HOME */
+ gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; /* 46 */
+ gpio-key,wakeup;
+ };
+
+ volume_down {
+ label = "volume-down";
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; /* 47 */
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ debug2 {
+ label = "omap4:green:debug2";
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* 173 */
+ };
+
+ debug4 {
+ label = "omap4:green:debug4";
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
+ };
+
+ user1 {
+ label = "omap4:blue:user";
+ gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
+ };
+
+ user2 {
+ label = "omap4:red:user";
+ gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
+ };
+
+ user3 {
+ label = "omap4:green:user";
+ gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* 174 */
+ };
+ };
+
+ sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "BlazeTablet";
+
+ ti,jack-detection = <1>;
+ ti,mclk-freq = <38400000>;
+
+ ti,mcpdm = <&mcpdm>;
+ ti,dmic = <&dmic>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "Vibrator", "VIBRAL",
+ "Vibrator", "VIBRAR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "MAINMIC", "Main Handset Mic",
+ "Main Handset Mic", "Main Mic Bias",
+ "SUBMIC", "Sub Handset Mic",
+ "Sub Handset Mic", "Main Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In",
+ "DMic", "Digital Mic",
+ "Digital Mic", "Digital Mic1 Bias";
+ };
+};
+
+&omap4_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6030_wkup_pins
+ >;
+
+ twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+ pinctrl-single,pins = <
+ 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
+ >;
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6030_pins
+ &twl6040_pins
+ &mcpdm_pins
+ &dmic_pins
+ &mcbsp1_pins
+ &mcbsp2_pins
+ &dss_hdmi_pins
+ &tpd12s015_pins
+ &gpio_keys_pins
+ &leds_pins
+ >;
+
+ gpio_keys_pins: pinmux_gpio_keys_pins {
+ pinctrl-single,pins = <
+ 0x26 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a19.gpio_43 */
+ 0x2C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a22.gpio_46 */
+ 0x2E (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a22.gpio_47 */
+ >;
+ };
+
+ leds_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ 0x34 (PIN_OUTPUT | MUX_MODE3) /* gpmc_ncs0.gpio_50 */
+ 0x138 (PIN_OUTPUT | MUX_MODE3) /* usbb2_hsic_data.gpio_169 */
+ 0x13a (PIN_OUTPUT | MUX_MODE3) /* usbb2_hsic_strobe.gpio_170 */
+ 0x140 (PIN_OUTPUT | MUX_MODE3) /* kpd_col5.gpio_173 */
+ 0x142 (PIN_OUTPUT | MUX_MODE3) /* kpd_col5.gpio_174 */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+ 0xda (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ 0xdc (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
+ 0xde (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
+ 0x102 (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
+ 0x104 (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ 0x106 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ uart4_pins: pinmux_uart4_pins {
+ pinctrl-single,pins = <
+ 0x11c (PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
+ 0x11e (PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
+ >;
+ };
+
+ twl6030_pins: pinmux_twl6030_pins {
+ pinctrl-single,pins = <
+ 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */
+ >;
+ };
+
+ twl6040_pins: pinmux_twl6040_pins {
+ pinctrl-single,pins = <
+ 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
+ 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
+ >;
+ };
+
+ mcpdm_pins: pinmux_mcpdm_pins {
+ pinctrl-single,pins = <
+ 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
+ 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
+ 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
+ 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
+ 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
+ >;
+ };
+
+ dmic_pins: pinmux_dmic_pins {
+ pinctrl-single,pins = <
+ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
+ 0xd2 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
+ 0xd4 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
+ 0xd6 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ 0xb6 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+ 0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
+ 0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
+ 0xbc (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
+ >;
+ };
+
+ mcspi1_pins: pinmux_mcspi1_pins {
+ pinctrl-single,pins = <
+ 0xf2 (PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ 0xf4 (PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ 0xf6 (PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ 0xf8 (PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ 0xfa (PIN_INPUT | MUX_MODE0) /* mcspi1_cs1.mcspi1_cs1 */
+ >;
+ };
+
+ dss_hdmi_pins: pinmux_dss_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ >;
+ };
+
+ tpd12s015_pins: pinmux_tpd12s015_pins {
+ pinctrl-single,pins = <
+ 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ i2c4_pins: pinmux_i2c4_pins {
+ pinctrl-single,pins = <
+ 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ >;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-parent = <&gic>;
+ };
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+ interrupt-parent = <&gic>;
+ ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+
+ /* regulators for vibra motor */
+ vddvibl-supply = <&vbat>;
+ vddvibr-supply = <&vbat>;
+
+ vibra {
+ /* Vibra driver, motor resistance parameters */
+ ti,vibldrv-res = <8>;
+ ti,vibrdrv-res = <3>;
+ ti,viblmotor-res = <10>;
+ ti,vibrmotor-res = <10>;
+ ti,vddvibl-uV = <0>; /* fixed volt supply - VBAT */
+ ti,vddvibr-uV = <0>; /* fixed volt supply - VBAT */
+ };
+ };
+};
+
+#include "twl6030.dtsi"
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <400000>;
+
+ /*
+ * Temperature Sensor
+ * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+ */
+ tmp105@48 {
+ compatible = "ti,tmp105";
+ reg = <0x48>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ clock-frequency = <400000>;
+
+ /*
+ * 3-Axis Digital Compass
+ * https://www.sparkfun.com/products/10426
+ */
+ hmc5883@1e {
+ compatible = "honeywell,hmc5883";
+ reg = <0x1e>;
+ };
+
+ /*
+ * BMP085 digital pressure sensor
+ */
+ bmp085@77 {
+ compatible = "bosch,bmp085";
+ reg = <0x77>;
+ };
+};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+
+ eth@0 {
+ compatible = "ks8851";
+ spi-max-frequency = <24000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
+ vdd-supply = <&vdd_eth>;
+ };
+
+ /*
+ * Dummy interface for debug UART multiplexor
+ */
+ quart@1 {
+ compatible = "dummy";
+ spi-max-frequency = <24000000>;
+ reg = <1>;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vaux1>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ bus-width = <4>;
+ ti,non-removable;
+};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+};
+
+&mcbsp3 {
+ status = "disabled";
+};
+
+&twl_usb_comparator {
+ usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+ interface-type = <1>;
+ mode = <3>;
+ power = <100>;
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists