linux-kernel - [PATCH 2/2] DMA: EDMA: Add comments for A-sync case calculations

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <1372210324-7181-1-git-send-email-joelagnel@ti.com>
Date:	Tue, 25 Jun 2013 20:32:04 -0500
From:	Joel A Fernandes <joelagnel@...com>
To:	Tony Lindgren <tony@...mide.com>, Sekhar Nori <nsekhar@...com>,
	Matt Porter <matt@...orter.com>,
	Grant Likely <grant.likely@...retlab.ca>,
	Rob Herring <rob.herring@...xeda.com>,
	Vinod Koul <vinod.koul@...el.com>,
	Mark Brown <broonie@...aro.org>,
	Benoit Cousson <b-cousson@...com>,
	Russell King <linux@....linux.org.uk>,
	Balaji TK <balajitk@...com>, Chris Ball <cjb@...top.org>
CC:	Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
	Linux OMAP List <linux-omap@...r.kernel.org>,
	Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
	Linux DaVinci Kernel List 
	<davinci-linux-open-source@...ux.davincidsp.com>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Linux Documentation List <linux-doc@...r.kernel.org>,
	Linux MMC List <linux-mmc@...r.kernel.org>,
	Linux SPI Devel List 
	<spi-devel-general@...ts.sourceforge.net>,
	Arnd Bergmann <arnd@...db.de>
Subject: [PATCH 2/2] DMA: EDMA: Add comments for A-sync case calculations

From: Joel A Fernandes <agnel.joel@...il.com>

A-sync case in EDMA driver is tricky and not so obvious.
Document the reasons for the calculations and the scenarious
they are used.

Signed-off-by: Joel A Fernandes <agnel.joel@...il.com>
---
 drivers/dma/edma.c |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index e008ed2..a1d9f3785 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -284,8 +284,24 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
 		 */
 		if (burst == 1) {
 			edesc->absync = false;
+			/*
+			 * For the A-sync case, bcnt and ccnt are the remainder
+			 * and quotient respectively of the division of:
+			 * (sg_dma_len(sg) / acnt) by (SZ_64K -1). This is so
+			 * that in case bcnt over flows, we have ccnt to use.
+			 * Note: In A-sync tranfer only, bcntrld is used, but it
+			 * only applies for sg_dma_len(sg) >= SZ_64K.
+			 * In this case, the best way adopted is- bccnt for the
+			 * first frame will be the remainder below. Then for
+			 * every successive frame, bcnt will be SZ_64K-1. This
+			 * is assured as bcntrld = 0xffff in end of function.
+			 */
 			ccnt = sg_dma_len(sg) / acnt / (SZ_64K - 1);
 			bcnt = sg_dma_len(sg) / acnt - ccnt * (SZ_64K - 1);
+			/*
+			 * If bcnt is non-zero, we have a remainder and hence an
+			 * extra frame to transfer, so increment ccnt.
+			 */
 			if (bcnt)
 				ccnt++;
 			else
@@ -343,6 +359,12 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
 
 		edesc->pset[i].a_b_cnt = bcnt << 16 | acnt;
 		edesc->pset[i].ccnt = ccnt;
+		/*
+		 * Only time when (bcntrld) auto reload is required is for
+		 * A-sync case, and in this case, a requirement of reload value
+		 * of SZ_64K-1 only is assured. 'link' is initially set to NULL
+		 * and then later will be populated by edma_execute.
+		 */
 		edesc->pset[i].link_bcntrld = 0xffffffff;
 
 	}
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/