linux-kernel - Re: [PATCH] Documentation: dt: bindings: TI WiLink modules

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20130628114129.GO11297@arwen.pp.htv.fi>
Date:	Fri, 28 Jun 2013 14:41:29 +0300
From:	Felipe Balbi <balbi@...com>
To:	Luciano Coelho <coelho@...com>
CC:	Mark Rutland <mark.rutland@....com>, <mturquette@...aro.org>,
	"grant.likely@...aro.org" <grant.likely@...aro.org>,
	"rob.herring@...xeda.com" <rob.herring@...xeda.com>,
	"devicetree-discuss@...ts.ozlabs.org" 
	<devicetree-discuss@...ts.ozlabs.org>,
	"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>,
	"linux-wireless@...r.kernel.org" <linux-wireless@...r.kernel.org>,
	"linux-arm@...r.kernel.org" <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH] Documentation: dt: bindings: TI WiLink modules

On Fri, Jun 28, 2013 at 02:22:11PM +0300, Luciano Coelho wrote:
> On Fri, 2013-06-28 at 13:31 +0300, Luciano Coelho wrote:
> > (fixed Mike's address)
> > 
> > On Fri, 2013-06-28 at 11:21 +0100, Mark Rutland wrote:
> > > On Fri, Jun 28, 2013 at 10:53:35AM +0100, Luciano Coelho wrote:
> > > > On Fri, 2013-06-28 at 10:38 +0100, Mark Rutland wrote:
> > > > > On Tue, Jun 25, 2013 at 09:35:30AM +0100, Luciano Coelho wrote:
> > > > > > +Optional properties:
> > > > > > +--------------------
> > > > > > +
> > > > > > +- refclock: the internal WLAN reference clock frequency (required for
> > > > > > +  WiLink6 and WiLink7; not used for WiLink8).  Must be one of the
> > > > > > +  following:
> > > > > > +	0 = 19.2 MHz
> > > > > > +	1 = 26.0 MHz
> > > > > > +	2 = 38.4 MHz
> > > > > > +	3 = 52.0 MHz
> > > > > > +	4 = 38.4 MHz, XTAL
> > > > > > +	5 = 26.0 MHz, XTAL
> > > > > > +
> > > > > > +- tcxoclock: the internal WLAN TCXO clock frequency (required for
> > > > > > +  WiLink7 not used for WiLink6 and WiLink8).  Must be one of the
> > > > > > +  following:
> > > > > > +	0 = 19.200 MHz
> > > > > > +	1 = 26.000 MHz
> > > > > > +	2 = 38.400 MHz
> > > > > > +	3 = 52.000 MHz
> > > > > > +	4 = 16.368 MHz
> > > > > > +	5 = 32.736 MHz
> > > > > > +	6 = 16.800 MHz
> > > > > > +	7 = 33.600 MHz
> > > > > 
> > > > > This looks suspiciously like what we have the common clock bindings for:
> > > > > 
> > > > > refclk {
> > > > > 	compatible = "fixed-clock";
> > > > > 	#clock-cells = <0>;
> > > > > 	clock-frequency = <19200000>;
> > > > > }
> > > > > 
> > > > > wilink {
> > > > > 	compatible = "ti,wilink7";
> > > > > 	interrupt-parent = <&some_interrupt_controller>;
> > > > > 	interrupts = <0 1 1>;
> > > > > 	clocks = <&refclk>, <&refclk>;
> > > > > 	clock-names = "refclk", "txoclk";
> > > > > };
> > > > > 
> > > > > Could you not use them?
> > > > 
> > > > Hmmm... this actually does look good.  But these are internal clocks in
> > > > the modules, they cannot be accessed from outside.  Does it make sense
> > > > to register them with the clock framework?
> > > 
> > > Given we already have a common way of describing clocks, I think it
> > > makes sense to use it -- people already understand the common bindings,
> > > and it's less code to add add to the kernel. I don't think the fact
> > > these clocks are internal should prevent us from describing them as we
> > > would an external clock.
> > 
> > Yes, I agree with you.  Thanks for the suggestion! I think it will look
> > much better.  And now that I dug a bit more into the code, I can see
> > that there are only structs being populated, so there shouldn't be any
> > other side-effects.
> 
> Hmmm, one thing that escaped me.  Besides the frequency, I also need a
> boolean that tells if the clock is XTAL or not.  I can't figure out how
> to pass this if I use the generic clock framework.  Any suggestions?

Could you use clock-output-names for that ?

XTAL clock:

refclk {
	compatible = "fixed-clock";
	#clock cells = <0>;
	clock-frequency = <19200000>;
	clock-output-names = "xtal";
};

non-XTAL clock:

refclk {
	compatible = "fixed-clock";
	#clock cells = <0>;
	clock-frequency = <19200000>;
	clock-output-names = "osc"; /* any better name ? */
};

-- 
balbi

Download attachment "signature.asc" of type "application/pgp-signature" (837 bytes)