| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1372447136-5751-2-git-send-email-alexandre.bounine@idt.com>
Date: Fri, 28 Jun 2013 15:18:50 -0400
From: Alexandre Bounine <alexandre.bounine@....com>
To: Andrew Morton <akpm@...ux-foundation.org>,
linux-kernel@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org
Cc: Alexandre Bounine <alexandre.bounine@....com>,
Matt Porter <mporter@...nel.crashing.org>,
Li Yang <leoli@...escale.com>,
Kumar Gala <galak@...nel.crashing.org>,
Andre van Herk <andre.van.herk@...drive.nl>,
Micha Nelissen <micha.nelissen@...drive.nl>,
Stef van Os <stef.van.os@...drive.nl>,
Jean Delvare <jdelvare@...e.de>
Subject: [PATCH 1/7] rapidio: convert switch drivers to modules
Rework RapidIO switch drivers to add an option to build them as loadable
kernel modules.
This patch removes RapidIO-specific vmlinux section and converts switch drivers
to be compatible with LDM driver registration method. To simplify registration
of device-specific callback routines this patch introduces rio_switch_ops data
structure. The sw_sysfs() callback is removed from the list of device-specific
operations because under the new structure its functions can be handled by
switch driver's probe() and remove() routines.
If a specific switch device driver is not loaded the RapidIO subsystem core will
use default standard-based operations to configure a switch. Because the current
implementation of RapidIO enumeration/discovery method relies on availability of
device-specific operations for error management, switch device drivers must be
loaded before the RapidIO enumeration/discovery starts.
This patch also moves several common routines from enumeration/discovery module
into the RapidIO core code to make switch-specific operations accessible to all
components of RapidIO subsystem.
Signed-off-by: Alexandre Bounine <alexandre.bounine@....com>
Cc: Matt Porter <mporter@...nel.crashing.org>
Cc: Li Yang <leoli@...escale.com>
Cc: Kumar Gala <galak@...nel.crashing.org>
Cc: Andre van Herk <andre.van.herk@...drive.nl>
Cc: Micha Nelissen <micha.nelissen@...drive.nl>
Cc: Stef van Os <stef.van.os@...drive.nl>
Cc: Jean Delvare <jdelvare@...e.de>
---
drivers/rapidio/Kconfig | 5 +
drivers/rapidio/rio-scan.c | 171 +--------------------
drivers/rapidio/rio-sysfs.c | 4 -
drivers/rapidio/rio.c | 286 +++++++++++++++++++++++++++++------
drivers/rapidio/rio.h | 41 +----
drivers/rapidio/switches/Kconfig | 12 +-
drivers/rapidio/switches/idt_gen2.c | 98 ++++++++++---
drivers/rapidio/switches/idtcps.c | 86 +++++++++--
drivers/rapidio/switches/tsi568.c | 71 ++++++++-
drivers/rapidio/switches/tsi57x.c | 81 ++++++++--
include/asm-generic/vmlinux.lds.h | 7 -
include/linux/rio.h | 51 +++----
12 files changed, 568 insertions(+), 345 deletions(-)
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index 5ab0564..3e3be57 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -67,4 +67,9 @@ config RAPIDIO_ENUM_BASIC
endchoice
+menu "RapidIO Switch drivers"
+ depends on RAPIDIO
+
source "drivers/rapidio/switches/Kconfig"
+
+endmenu
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 4c15dbf..61c913f 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -406,6 +406,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
rio_mport_write_config_32(port, destid, hopcount,
RIO_COMPONENT_TAG_CSR, next_comptag);
rdev->comp_tag = next_comptag++;
+ rdev->do_enum = true;
} else {
rio_mport_read_config_32(port, destid, hopcount,
RIO_COMPONENT_TAG_CSR,
@@ -434,6 +435,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
rswitch = rdev->rswitch;
rswitch->switchid = rdev->comp_tag & RIO_CTAG_UDEVID;
rswitch->port_ok = 0;
+ spin_lock_init(&rswitch->lock);
rswitch->route_table = kzalloc(sizeof(u8)*
RIO_MAX_ROUTE_ENTRIES(port->sys_size),
GFP_KERNEL);
@@ -445,11 +447,9 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
rswitch->switchid);
- rio_switch_init(rdev, do_enum);
- if (do_enum && rswitch->clr_table)
- rswitch->clr_table(port, destid, hopcount,
- RIO_GLOBAL_TABLE);
+ if (do_enum)
+ rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0);
list_add_tail(&rswitch->node, &net->switches);
@@ -533,156 +533,6 @@ rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
}
/**
- * rio_lock_device - Acquires host device lock for specified device
- * @port: Master port to send transaction
- * @destid: Destination ID for device/switch
- * @hopcount: Hopcount to reach switch
- * @wait_ms: Max wait time in msec (0 = no timeout)
- *
- * Attepts to acquire host device lock for specified device
- * Returns 0 if device lock acquired or EINVAL if timeout expires.
- */
-static int
-rio_lock_device(struct rio_mport *port, u16 destid, u8 hopcount, int wait_ms)
-{
- u32 result;
- int tcnt = 0;
-
- /* Attempt to acquire device lock */
- rio_mport_write_config_32(port, destid, hopcount,
- RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
- rio_mport_read_config_32(port, destid, hopcount,
- RIO_HOST_DID_LOCK_CSR, &result);
-
- while (result != port->host_deviceid) {
- if (wait_ms != 0 && tcnt == wait_ms) {
- pr_debug("RIO: timeout when locking device %x:%x\n",
- destid, hopcount);
- return -EINVAL;
- }
-
- /* Delay a bit */
- mdelay(1);
- tcnt++;
- /* Try to acquire device lock again */
- rio_mport_write_config_32(port, destid,
- hopcount,
- RIO_HOST_DID_LOCK_CSR,
- port->host_deviceid);
- rio_mport_read_config_32(port, destid,
- hopcount,
- RIO_HOST_DID_LOCK_CSR, &result);
- }
-
- return 0;
-}
-
-/**
- * rio_unlock_device - Releases host device lock for specified device
- * @port: Master port to send transaction
- * @destid: Destination ID for device/switch
- * @hopcount: Hopcount to reach switch
- *
- * Returns 0 if device lock released or EINVAL if fails.
- */
-static int
-rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount)
-{
- u32 result;
-
- /* Release device lock */
- rio_mport_write_config_32(port, destid,
- hopcount,
- RIO_HOST_DID_LOCK_CSR,
- port->host_deviceid);
- rio_mport_read_config_32(port, destid, hopcount,
- RIO_HOST_DID_LOCK_CSR, &result);
- if ((result & 0xffff) != 0xffff) {
- pr_debug("RIO: badness when releasing device lock %x:%x\n",
- destid, hopcount);
- return -EINVAL;
- }
-
- return 0;
-}
-
-/**
- * rio_route_add_entry- Add a route entry to a switch routing table
- * @rdev: RIO device
- * @table: Routing table ID
- * @route_destid: Destination ID to be routed
- * @route_port: Port number to be routed
- * @lock: lock switch device flag
- *
- * Calls the switch specific add_entry() method to add a route entry
- * on a switch. The route table can be specified using the @table
- * argument if a switch has per port routing tables or the normal
- * use is to specific all tables (or the global table) by passing
- * %RIO_GLOBAL_TABLE in @table. Returns %0 on success or %-EINVAL
- * on failure.
- */
-static int
-rio_route_add_entry(struct rio_dev *rdev,
- u16 table, u16 route_destid, u8 route_port, int lock)
-{
- int rc;
-
- if (lock) {
- rc = rio_lock_device(rdev->net->hport, rdev->destid,
- rdev->hopcount, 1000);
- if (rc)
- return rc;
- }
-
- rc = rdev->rswitch->add_entry(rdev->net->hport, rdev->destid,
- rdev->hopcount, table,
- route_destid, route_port);
- if (lock)
- rio_unlock_device(rdev->net->hport, rdev->destid,
- rdev->hopcount);
-
- return rc;
-}
-
-/**
- * rio_route_get_entry- Read a route entry in a switch routing table
- * @rdev: RIO device
- * @table: Routing table ID
- * @route_destid: Destination ID to be routed
- * @route_port: Pointer to read port number into
- * @lock: lock switch device flag
- *
- * Calls the switch specific get_entry() method to read a route entry
- * in a switch. The route table can be specified using the @table
- * argument if a switch has per port routing tables or the normal
- * use is to specific all tables (or the global table) by passing
- * %RIO_GLOBAL_TABLE in @table. Returns %0 on success or %-EINVAL
- * on failure.
- */
-static int
-rio_route_get_entry(struct rio_dev *rdev, u16 table,
- u16 route_destid, u8 *route_port, int lock)
-{
- int rc;
-
- if (lock) {
- rc = rio_lock_device(rdev->net->hport, rdev->destid,
- rdev->hopcount, 1000);
- if (rc)
- return rc;
- }
-
- rc = rdev->rswitch->get_entry(rdev->net->hport, rdev->destid,
- rdev->hopcount, table,
- route_destid, route_port);
- if (lock)
- rio_unlock_device(rdev->net->hport, rdev->destid,
- rdev->hopcount);
-
- return rc;
-}
-
-/**
* rio_get_host_deviceid_lock- Reads the Host Device ID Lock CSR on a device
* @port: Master port to send transaction
* @hopcount: Number of hops to the device
@@ -1094,12 +944,9 @@ static void rio_update_route_tables(struct rio_net *net)
sport = RIO_GET_PORT_NUM(swrdev->swpinfo);
- if (rswitch->add_entry) {
- rio_route_add_entry(swrdev,
- RIO_GLOBAL_TABLE, destid,
- sport, 0);
- rswitch->route_table[destid] = sport;
- }
+ rio_route_add_entry(swrdev, RIO_GLOBAL_TABLE,
+ destid, sport, 0);
+ rswitch->route_table[destid] = sport;
}
}
}
@@ -1115,8 +962,8 @@ static void rio_update_route_tables(struct rio_net *net)
static void rio_init_em(struct rio_dev *rdev)
{
if (rio_is_switch(rdev) && (rdev->em_efptr) &&
- (rdev->rswitch->em_init)) {
- rdev->rswitch->em_init(rdev);
+ rdev->rswitch->ops && rdev->rswitch->ops->em_init) {
+ rdev->rswitch->ops->em_init(rdev);
}
}
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index 66d4acd..864e52f 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -257,8 +257,6 @@ int rio_create_sysfs_dev_files(struct rio_dev *rdev)
err |= device_create_file(&rdev->dev, &dev_attr_routes);
err |= device_create_file(&rdev->dev, &dev_attr_lnext);
err |= device_create_file(&rdev->dev, &dev_attr_hopcount);
- if (!err && rdev->rswitch->sw_sysfs)
- err = rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_CREATE);
}
if (err)
@@ -281,8 +279,6 @@ void rio_remove_sysfs_dev_files(struct rio_dev *rdev)
device_remove_file(&rdev->dev, &dev_attr_routes);
device_remove_file(&rdev->dev, &dev_attr_lnext);
device_remove_file(&rdev->dev, &dev_attr_hopcount);
- if (rdev->rswitch->sw_sysfs)
- rdev->rswitch->sw_sysfs(rdev, RIO_SW_SYSFS_REMOVE);
}
}
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index cb1c089..b17d521 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -7,7 +7,6 @@
*
* Copyright 2009 Integrated Device Technology, Inc.
* Alex Bounine <alexandre.bounine@....com>
- * - Added Port-Write/Error Management initialization and handling
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -580,44 +579,6 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock)
EXPORT_SYMBOL_GPL(rio_set_port_lockout);
/**
- * rio_switch_init - Sets switch operations for a particular vendor switch
- * @rdev: RIO device
- * @do_enum: Enumeration/Discovery mode flag
- *
- * Searches the RIO switch ops table for known switch types. If the vid
- * and did match a switch table entry, then call switch initialization
- * routine to setup switch-specific routines.
- */
-void rio_switch_init(struct rio_dev *rdev, int do_enum)
-{
- struct rio_switch_ops *cur = __start_rio_switch_ops;
- struct rio_switch_ops *end = __end_rio_switch_ops;
-
- while (cur < end) {
- if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
- pr_debug("RIO: calling init routine for %s\n",
- rio_name(rdev));
- cur->init_hook(rdev, do_enum);
- break;
- }
- cur++;
- }
-
- if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
- pr_debug("RIO: adding STD routing ops for %s\n",
- rio_name(rdev));
- rdev->rswitch->add_entry = rio_std_route_add_entry;
- rdev->rswitch->get_entry = rio_std_route_get_entry;
- rdev->rswitch->clr_table = rio_std_route_clr_table;
- }
-
- if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
- printk(KERN_ERR "RIO: missing routing ops for %s\n",
- rio_name(rdev));
-}
-EXPORT_SYMBOL_GPL(rio_switch_init);
-
-/**
* rio_enable_rx_tx_port - enable input receiver and output transmitter of
* given port
* @port: Master port associated with the RIO network
@@ -970,8 +931,8 @@ int rio_inb_pwrite_handler(union rio_pw_msg *pw_msg)
/*
* Process the port-write notification from switch
*/
- if (rdev->rswitch->em_handle)
- rdev->rswitch->em_handle(rdev, portnum);
+ if (rdev->rswitch->ops && rdev->rswitch->ops->em_handle)
+ rdev->rswitch->ops->em_handle(rdev, portnum);
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
@@ -1207,8 +1168,9 @@ struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from)
* @route_destid: destID entry in the RT
* @route_port: destination port for specified destID
*/
-int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
- u16 table, u16 route_destid, u8 route_port)
+static int
+rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
{
if (table == RIO_GLOBAL_TABLE) {
rio_mport_write_config_32(mport, destid, hopcount,
@@ -1234,8 +1196,9 @@ int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
* @route_destid: destID entry in the RT
* @route_port: returned destination port for specified destID
*/
-int rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
- u16 table, u16 route_destid, u8 *route_port)
+static int
+rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
{
u32 result;
@@ -1259,8 +1222,9 @@ int rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
* @hopcount: Number of switch hops to the device
* @table: routing table ID (global or port-specific)
*/
-int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
- u16 table)
+static int
+rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
{
u32 max_destid = 0xff;
u32 i, pef, id_inc = 1, ext_cfg = 0;
@@ -1301,6 +1265,234 @@ int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
return 0;
}
+/**
+ * rio_lock_device - Acquires host device lock for specified device
+ * @port: Master port to send transaction
+ * @destid: Destination ID for device/switch
+ * @hopcount: Hopcount to reach switch
+ * @wait_ms: Max wait time in msec (0 = no timeout)
+ *
+ * Attepts to acquire host device lock for specified device
+ * Returns 0 if device lock acquired or EINVAL if timeout expires.
+ */
+int rio_lock_device(struct rio_mport *port, u16 destid,
+ u8 hopcount, int wait_ms)
+{
+ u32 result;
+ int tcnt = 0;
+
+ /* Attempt to acquire device lock */
+ rio_mport_write_config_32(port, destid, hopcount,
+ RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_HOST_DID_LOCK_CSR, &result);
+
+ while (result != port->host_deviceid) {
+ if (wait_ms != 0 && tcnt == wait_ms) {
+ pr_debug("RIO: timeout when locking device %x:%x\n",
+ destid, hopcount);
+ return -EINVAL;
+ }
+
+ /* Delay a bit */
+ mdelay(1);
+ tcnt++;
+ /* Try to acquire device lock again */
+ rio_mport_write_config_32(port, destid,
+ hopcount,
+ RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+ rio_mport_read_config_32(port, destid,
+ hopcount,
+ RIO_HOST_DID_LOCK_CSR, &result);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_lock_device);
+
+/**
+ * rio_unlock_device - Releases host device lock for specified device
+ * @port: Master port to send transaction
+ * @destid: Destination ID for device/switch
+ * @hopcount: Hopcount to reach switch
+ *
+ * Returns 0 if device lock released or EINVAL if fails.
+ */
+int rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount)
+{
+ u32 result;
+
+ /* Release device lock */
+ rio_mport_write_config_32(port, destid,
+ hopcount,
+ RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_HOST_DID_LOCK_CSR, &result);
+ if ((result & 0xffff) != 0xffff) {
+ pr_debug("RIO: badness when releasing device lock %x:%x\n",
+ destid, hopcount);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_unlock_device);
+
+/**
+ * rio_route_add_entry- Add a route entry to a switch routing table
+ * @rdev: RIO device
+ * @table: Routing table ID
+ * @route_destid: Destination ID to be routed
+ * @route_port: Port number to be routed
+ * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock)
+ *
+ * If available calls the switch specific add_entry() method to add a route
+ * entry into a switch routing table. Otherwise uses standard RT update method
+ * as defined by RapidIO specification. A specific routing table can be selected
+ * using the @table argument if a switch has per port routing tables or
+ * the standard (or global) table may be used by passing
+ * %RIO_GLOBAL_TABLE in @table.
+ *
+ * Returns %0 on success or %-EINVAL on failure.
+ */
+int rio_route_add_entry(struct rio_dev *rdev,
+ u16 table, u16 route_destid, u8 route_port, int lock)
+{
+ int rc = -EINVAL;
+ struct rio_switch_ops *ops = rdev->rswitch->ops;
+
+ if (lock) {
+ rc = rio_lock_device(rdev->net->hport, rdev->destid,
+ rdev->hopcount, 1000);
+ if (rc)
+ return rc;
+ }
+
+ spin_lock(&rdev->rswitch->lock);
+
+ if (ops == NULL || ops->add_entry == NULL) {
+ rc = rio_std_route_add_entry(rdev->net->hport, rdev->destid,
+ rdev->hopcount, table,
+ route_destid, route_port);
+ } else if (try_module_get(ops->owner)) {
+ rc = ops->add_entry(rdev->net->hport, rdev->destid,
+ rdev->hopcount, table, route_destid,
+ route_port);
+ module_put(ops->owner);
+ }
+
+ spin_unlock(&rdev->rswitch->lock);
+
+ if (lock)
+ rio_unlock_device(rdev->net->hport, rdev->destid,
+ rdev->hopcount);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_route_add_entry);
+
+/**
+ * rio_route_get_entry- Read an entry from a switch routing table
+ * @rdev: RIO device
+ * @table: Routing table ID
+ * @route_destid: Destination ID to be routed
+ * @route_port: Pointer to read port number into
+ * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock)
+ *
+ * If available calls the switch specific get_entry() method to fetch a route
+ * entry from a switch routing table. Otherwise uses standard RT read method
+ * as defined by RapidIO specification. A specific routing table can be selected
+ * using the @table argument if a switch has per port routing tables or
+ * the standard (or global) table may be used by passing
+ * %RIO_GLOBAL_TABLE in @table.
+ *
+ * Returns %0 on success or %-EINVAL on failure.
+ */
+int rio_route_get_entry(struct rio_dev *rdev, u16 table,
+ u16 route_destid, u8 *route_port, int lock)
+{
+ int rc = -EINVAL;
+ struct rio_switch_ops *ops = rdev->rswitch->ops;
+
+ if (lock) {
+ rc = rio_lock_device(rdev->net->hport, rdev->destid,
+ rdev->hopcount, 1000);
+ if (rc)
+ return rc;
+ }
+
+ spin_lock(&rdev->rswitch->lock);
+
+ if (ops == NULL || ops->get_entry == NULL) {
+ rc = rio_std_route_get_entry(rdev->net->hport, rdev->destid,
+ rdev->hopcount, table,
+ route_destid, route_port);
+ } else if (try_module_get(ops->owner)) {
+ rc = ops->get_entry(rdev->net->hport, rdev->destid,
+ rdev->hopcount, table, route_destid,
+ route_port);
+ module_put(ops->owner);
+ }
+
+ spin_unlock(&rdev->rswitch->lock);
+
+ if (lock)
+ rio_unlock_device(rdev->net->hport, rdev->destid,
+ rdev->hopcount);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_route_get_entry);
+
+/**
+ * rio_route_clr_table - Clear a switch routing table
+ * @rdev: RIO device
+ * @table: Routing table ID
+ * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock)
+ *
+ * If available calls the switch specific clr_table() method to clear a switch
+ * routing table. Otherwise uses standard RT write method as defined by RapidIO
+ * specification. A specific routing table can be selected using the @table
+ * argument if a switch has per port routing tables or the standard (or global)
+ * table may be used by passing %RIO_GLOBAL_TABLE in @table.
+ *
+ * Returns %0 on success or %-EINVAL on failure.
+ */
+int rio_route_clr_table(struct rio_dev *rdev, u16 table, int lock)
+{
+ int rc = -EINVAL;
+ struct rio_switch_ops *ops = rdev->rswitch->ops;
+
+ if (lock) {
+ rc = rio_lock_device(rdev->net->hport, rdev->destid,
+ rdev->hopcount, 1000);
+ if (rc)
+ return rc;
+ }
+
+ spin_lock(&rdev->rswitch->lock);
+
+ if (ops == NULL || ops->clr_table == NULL) {
+ rc = rio_std_route_clr_table(rdev->net->hport, rdev->destid,
+ rdev->hopcount, table);
+ } else if (try_module_get(ops->owner)) {
+ rc = ops->clr_table(rdev->net->hport, rdev->destid,
+ rdev->hopcount, table);
+
+ module_put(ops->owner);
+ }
+
+ spin_unlock(&rdev->rswitch->lock);
+
+ if (lock)
+ rio_unlock_device(rdev->net->hport, rdev->destid,
+ rdev->hopcount);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_route_clr_table);
+
#ifdef CONFIG_RAPIDIO_DMA_ENGINE
static bool rio_chan_filter(struct dma_chan *chan, void *arg)
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index c14f864..d595877 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -28,18 +28,17 @@ extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid,
u8 hopcount);
extern int rio_create_sysfs_dev_files(struct rio_dev *rdev);
-extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid,
- u8 hopcount, u16 table, u16 route_destid,
- u8 route_port);
-extern int rio_std_route_get_entry(struct rio_mport *mport, u16 destid,
- u8 hopcount, u16 table, u16 route_destid,
- u8 *route_port);
-extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid,
- u8 hopcount, u16 table);
+extern int rio_lock_device(struct rio_mport *port, u16 destid,
+ u8 hopcount, int wait_ms);
+extern int rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount);
+extern int rio_route_add_entry(struct rio_dev *rdev,
+ u16 table, u16 route_destid, u8 route_port, int lock);
+extern int rio_route_get_entry(struct rio_dev *rdev, u16 table,
+ u16 route_destid, u8 *route_port, int lock);
+extern int rio_route_clr_table(struct rio_dev *rdev, u16 table, int lock);
extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock);
extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from);
extern int rio_add_device(struct rio_dev *rdev);
-extern void rio_switch_init(struct rio_dev *rdev, int do_enum);
extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid,
u8 hopcount, u8 port_num);
extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops);
@@ -51,29 +50,5 @@ extern struct rio_mport *rio_find_mport(int mport_id);
extern struct device_attribute rio_dev_attrs[];
extern struct bus_attribute rio_bus_attrs[];
-extern struct rio_switch_ops __start_rio_switch_ops[];
-extern struct rio_switch_ops __end_rio_switch_ops[];
-
-/* Helpers internal to the RIO core code */
-#define DECLARE_RIO_SWITCH_SECTION(section, name, vid, did, init_hook) \
- static const struct rio_switch_ops __rio_switch_##name __used \
- __section(section) = { vid, did, init_hook };
-
-/**
- * DECLARE_RIO_SWITCH_INIT - Registers switch initialization routine
- * @vid: RIO vendor ID
- * @did: RIO device ID
- * @init_hook: Callback that performs switch-specific initialization
- *
- * Manipulating switch route tables and error management in RIO
- * is switch specific. This registers a switch by vendor and device ID with
- * initialization callback for setting up switch operations and (if required)
- * hardware initialization. A &struct rio_switch_ops is initialized with
- * pointer to the init routine and placed into a RIO-specific kernel section.
- */
-#define DECLARE_RIO_SWITCH_INIT(vid, did, init_hook) \
- DECLARE_RIO_SWITCH_SECTION(.rio_switch_ops, vid##did, \
- vid, did, init_hook)
-
#define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
#define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
diff --git a/drivers/rapidio/switches/Kconfig b/drivers/rapidio/switches/Kconfig
index 62d4a06..3458415 100644
--- a/drivers/rapidio/switches/Kconfig
+++ b/drivers/rapidio/switches/Kconfig
@@ -2,27 +2,23 @@
# RapidIO switches configuration
#
config RAPIDIO_TSI57X
- bool "IDT Tsi57x SRIO switches support"
- depends on RAPIDIO
+ tristate "IDT Tsi57x SRIO switches support"
---help---
Includes support for IDT Tsi57x family of serial RapidIO switches.
config RAPIDIO_CPS_XX
- bool "IDT CPS-xx SRIO switches support"
- depends on RAPIDIO
+ tristate "IDT CPS-xx SRIO switches support"
---help---
Includes support for IDT CPS-16/12/10/8 serial RapidIO switches.
config RAPIDIO_TSI568
- bool "Tsi568 SRIO switch support"
- depends on RAPIDIO
+ tristate "Tsi568 SRIO switch support"
default n
---help---
Includes support for IDT Tsi568 serial RapidIO switch.
config RAPIDIO_CPS_GEN2
- bool "IDT CPS Gen.2 SRIO switch support"
- depends on RAPIDIO
+ tristate "IDT CPS Gen.2 SRIO switch support"
default n
---help---
Includes support for ITD CPS Gen.2 serial RapidIO switches.
diff --git a/drivers/rapidio/switches/idt_gen2.c b/drivers/rapidio/switches/idt_gen2.c
index 809b7a3..9126d4b 100644
--- a/drivers/rapidio/switches/idt_gen2.c
+++ b/drivers/rapidio/switches/idt_gen2.c
@@ -15,6 +15,7 @@
#include <linux/rio_drv.h>
#include <linux/rio_ids.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include "../rio.h"
#define LOCAL_RTE_CONF_DESTID_SEL 0x010070
@@ -387,12 +388,12 @@ idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf)
static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL);
-static int idtg2_sysfs(struct rio_dev *rdev, int create)
+static int idtg2_sysfs(struct rio_dev *rdev, bool create)
{
struct device *dev = &rdev->dev;
int err = 0;
- if (create == RIO_SW_SYSFS_CREATE) {
+ if (create) {
/* Initialize sysfs entries */
err = device_create_file(dev, &dev_attr_errlog);
if (err)
@@ -403,29 +404,90 @@ static int idtg2_sysfs(struct rio_dev *rdev, int create)
return err;
}
-static int idtg2_switch_init(struct rio_dev *rdev, int do_enum)
+static struct rio_switch_ops idtg2_switch_ops = {
+ .owner = THIS_MODULE,
+ .add_entry = idtg2_route_add_entry,
+ .get_entry = idtg2_route_get_entry,
+ .clr_table = idtg2_route_clr_table,
+ .set_domain = idtg2_set_domain,
+ .get_domain = idtg2_get_domain,
+ .em_init = idtg2_em_init,
+ .em_handle = idtg2_em_handler,
+};
+
+static int idtg2_probe(struct rio_dev *rdev, const struct rio_device_id *id)
{
pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
- rdev->rswitch->add_entry = idtg2_route_add_entry;
- rdev->rswitch->get_entry = idtg2_route_get_entry;
- rdev->rswitch->clr_table = idtg2_route_clr_table;
- rdev->rswitch->set_domain = idtg2_set_domain;
- rdev->rswitch->get_domain = idtg2_get_domain;
- rdev->rswitch->em_init = idtg2_em_init;
- rdev->rswitch->em_handle = idtg2_em_handler;
- rdev->rswitch->sw_sysfs = idtg2_sysfs;
-
- if (do_enum) {
+
+ spin_lock(&rdev->rswitch->lock);
+
+ if (rdev->rswitch->ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return -EINVAL;
+ }
+
+ rdev->rswitch->ops = &idtg2_switch_ops;
+
+ if (rdev->do_enum) {
/* Ensure that default routing is disabled on startup */
rio_write_config_32(rdev,
RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE);
}
+ /* Create device-specific sysfs attributes */
+ idtg2_sysfs(rdev, true);
+
+ spin_unlock(&rdev->rswitch->lock);
return 0;
}
-DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1848, idtg2_switch_init);
-DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1616, idtg2_switch_init);
-DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTVPS1616, idtg2_switch_init);
-DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTSPS1616, idtg2_switch_init);
-DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1432, idtg2_switch_init);
+static void idtg2_remove(struct rio_dev *rdev)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+ spin_lock(&rdev->rswitch->lock);
+ if (rdev->rswitch->ops != &idtg2_switch_ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return;
+ }
+ rdev->rswitch->ops = NULL;
+
+ /* Remove device-specific sysfs attributes */
+ idtg2_sysfs(rdev, false);
+
+ spin_unlock(&rdev->rswitch->lock);
+}
+
+static struct rio_device_id idtg2_id_table[] = {
+ {RIO_DEVICE(RIO_DID_IDTCPS1848, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTCPS1616, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTVPS1616, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTSPS1616, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTCPS1432, RIO_VID_IDT)},
+ { 0, } /* terminate list */
+};
+
+static struct rio_driver idtg2_driver = {
+ .name = "idt_gen2",
+ .id_table = idtg2_id_table,
+ .probe = idtg2_probe,
+ .remove = idtg2_remove,
+};
+
+static int __init idtg2_init(void)
+{
+ return rio_register_driver(&idtg2_driver);
+}
+
+static void __exit idtg2_exit(void)
+{
+ pr_debug("RIO: %s\n", __func__);
+ rio_unregister_driver(&idtg2_driver);
+ pr_debug("RIO: %s done\n", __func__);
+}
+
+device_initcall(idtg2_init);
+module_exit(idtg2_exit);
+
+MODULE_DESCRIPTION("IDT CPS Gen.2 Serial RapidIO switch family driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rapidio/switches/idtcps.c b/drivers/rapidio/switches/idtcps.c
index d06ee2d..7fbb60d 100644
--- a/drivers/rapidio/switches/idtcps.c
+++ b/drivers/rapidio/switches/idtcps.c
@@ -13,6 +13,7 @@
#include <linux/rio.h>
#include <linux/rio_drv.h>
#include <linux/rio_ids.h>
+#include <linux/module.h>
#include "../rio.h"
#define CPS_DEFAULT_ROUTE 0xde
@@ -118,18 +119,31 @@ idtcps_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
return 0;
}
-static int idtcps_switch_init(struct rio_dev *rdev, int do_enum)
+static struct rio_switch_ops idtcps_switch_ops = {
+ .owner = THIS_MODULE,
+ .add_entry = idtcps_route_add_entry,
+ .get_entry = idtcps_route_get_entry,
+ .clr_table = idtcps_route_clr_table,
+ .set_domain = idtcps_set_domain,
+ .get_domain = idtcps_get_domain,
+ .em_init = NULL,
+ .em_handle = NULL,
+};
+
+static int idtcps_probe(struct rio_dev *rdev, const struct rio_device_id *id)
{
pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
- rdev->rswitch->add_entry = idtcps_route_add_entry;
- rdev->rswitch->get_entry = idtcps_route_get_entry;
- rdev->rswitch->clr_table = idtcps_route_clr_table;
- rdev->rswitch->set_domain = idtcps_set_domain;
- rdev->rswitch->get_domain = idtcps_get_domain;
- rdev->rswitch->em_init = NULL;
- rdev->rswitch->em_handle = NULL;
-
- if (do_enum) {
+
+ spin_lock(&rdev->rswitch->lock);
+
+ if (rdev->rswitch->ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return -EINVAL;
+ }
+
+ rdev->rswitch->ops = &idtcps_switch_ops;
+
+ if (rdev->do_enum) {
/* set TVAL = ~50us */
rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
@@ -138,12 +152,52 @@ static int idtcps_switch_init(struct rio_dev *rdev, int do_enum)
RIO_STD_RTE_DEFAULT_PORT, CPS_NO_ROUTE);
}
+ spin_unlock(&rdev->rswitch->lock);
return 0;
}
-DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS6Q, idtcps_switch_init);
-DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS8, idtcps_switch_init);
-DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS10Q, idtcps_switch_init);
-DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS12, idtcps_switch_init);
-DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS16, idtcps_switch_init);
-DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDT70K200, idtcps_switch_init);
+static void idtcps_remove(struct rio_dev *rdev)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+ spin_lock(&rdev->rswitch->lock);
+ if (rdev->rswitch->ops != &idtcps_switch_ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return;
+ }
+ rdev->rswitch->ops = NULL;
+ spin_unlock(&rdev->rswitch->lock);
+}
+
+static struct rio_device_id idtcps_id_table[] = {
+ {RIO_DEVICE(RIO_DID_IDTCPS6Q, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTCPS8, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTCPS10Q, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTCPS12, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTCPS16, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDT70K200, RIO_VID_IDT)},
+ { 0, } /* terminate list */
+};
+
+static struct rio_driver idtcps_driver = {
+ .name = "idtcps",
+ .id_table = idtcps_id_table,
+ .probe = idtcps_probe,
+ .remove = idtcps_remove,
+};
+
+static int __init idtcps_init(void)
+{
+ return rio_register_driver(&idtcps_driver);
+}
+
+static void __exit idtcps_exit(void)
+{
+ rio_unregister_driver(&idtcps_driver);
+}
+
+device_initcall(idtcps_init);
+module_exit(idtcps_exit);
+
+MODULE_DESCRIPTION("IDT CPS Gen.1 Serial RapidIO switch family driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rapidio/switches/tsi568.c b/drivers/rapidio/switches/tsi568.c
index 3994c00..8a43561 100644
--- a/drivers/rapidio/switches/tsi568.c
+++ b/drivers/rapidio/switches/tsi568.c
@@ -19,6 +19,7 @@
#include <linux/rio_drv.h>
#include <linux/rio_ids.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include "../rio.h"
/* Global (broadcast) route registers */
@@ -129,18 +130,70 @@ tsi568_em_init(struct rio_dev *rdev)
return 0;
}
-static int tsi568_switch_init(struct rio_dev *rdev, int do_enum)
+static struct rio_switch_ops tsi568_switch_ops = {
+ .owner = THIS_MODULE,
+ .add_entry = tsi568_route_add_entry,
+ .get_entry = tsi568_route_get_entry,
+ .clr_table = tsi568_route_clr_table,
+ .set_domain = NULL,
+ .get_domain = NULL,
+ .em_init = tsi568_em_init,
+ .em_handle = NULL,
+};
+
+static int tsi568_probe(struct rio_dev *rdev, const struct rio_device_id *id)
{
pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
- rdev->rswitch->add_entry = tsi568_route_add_entry;
- rdev->rswitch->get_entry = tsi568_route_get_entry;
- rdev->rswitch->clr_table = tsi568_route_clr_table;
- rdev->rswitch->set_domain = NULL;
- rdev->rswitch->get_domain = NULL;
- rdev->rswitch->em_init = tsi568_em_init;
- rdev->rswitch->em_handle = NULL;
+ spin_lock(&rdev->rswitch->lock);
+
+ if (rdev->rswitch->ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return -EINVAL;
+ }
+
+ rdev->rswitch->ops = &tsi568_switch_ops;
+ spin_unlock(&rdev->rswitch->lock);
return 0;
}
-DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI568, tsi568_switch_init);
+static void tsi568_remove(struct rio_dev *rdev)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+ spin_lock(&rdev->rswitch->lock);
+ if (rdev->rswitch->ops != &tsi568_switch_ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return;
+ }
+ rdev->rswitch->ops = NULL;
+ spin_unlock(&rdev->rswitch->lock);
+}
+
+static struct rio_device_id tsi568_id_table[] = {
+ {RIO_DEVICE(RIO_DID_TSI568, RIO_VID_TUNDRA)},
+ { 0, } /* terminate list */
+};
+
+static struct rio_driver tsi568_driver = {
+ .name = "tsi568",
+ .id_table = tsi568_id_table,
+ .probe = tsi568_probe,
+ .remove = tsi568_remove,
+};
+
+static int __init tsi568_init(void)
+{
+ return rio_register_driver(&tsi568_driver);
+}
+
+static void __exit tsi568_exit(void)
+{
+ rio_unregister_driver(&tsi568_driver);
+}
+
+device_initcall(tsi568_init);
+module_exit(tsi568_exit);
+
+MODULE_DESCRIPTION("IDT Tsi568 Serial RapidIO switch driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c
index db8b802..42c8b01 100644
--- a/drivers/rapidio/switches/tsi57x.c
+++ b/drivers/rapidio/switches/tsi57x.c
@@ -19,6 +19,7 @@
#include <linux/rio_drv.h>
#include <linux/rio_ids.h>
#include <linux/delay.h>
+#include <linux/module.h>
#include "../rio.h"
/* Global (broadcast) route registers */
@@ -292,27 +293,79 @@ exit_es:
return 0;
}
-static int tsi57x_switch_init(struct rio_dev *rdev, int do_enum)
+static struct rio_switch_ops tsi57x_switch_ops = {
+ .owner = THIS_MODULE,
+ .add_entry = tsi57x_route_add_entry,
+ .get_entry = tsi57x_route_get_entry,
+ .clr_table = tsi57x_route_clr_table,
+ .set_domain = tsi57x_set_domain,
+ .get_domain = tsi57x_get_domain,
+ .em_init = tsi57x_em_init,
+ .em_handle = tsi57x_em_handler,
+};
+
+static int tsi57x_probe(struct rio_dev *rdev, const struct rio_device_id *id)
{
pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
- rdev->rswitch->add_entry = tsi57x_route_add_entry;
- rdev->rswitch->get_entry = tsi57x_route_get_entry;
- rdev->rswitch->clr_table = tsi57x_route_clr_table;
- rdev->rswitch->set_domain = tsi57x_set_domain;
- rdev->rswitch->get_domain = tsi57x_get_domain;
- rdev->rswitch->em_init = tsi57x_em_init;
- rdev->rswitch->em_handle = tsi57x_em_handler;
-
- if (do_enum) {
+
+ spin_lock(&rdev->rswitch->lock);
+
+ if (rdev->rswitch->ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return -EINVAL;
+ }
+ rdev->rswitch->ops = &tsi57x_switch_ops;
+
+ if (rdev->do_enum) {
/* Ensure that default routing is disabled on startup */
rio_write_config_32(rdev, RIO_STD_RTE_DEFAULT_PORT,
RIO_INVALID_ROUTE);
}
+ spin_unlock(&rdev->rswitch->lock);
return 0;
}
-DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_switch_init);
-DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_switch_init);
-DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_switch_init);
-DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_switch_init);
+static void tsi57x_remove(struct rio_dev *rdev)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+ spin_lock(&rdev->rswitch->lock);
+ if (rdev->rswitch->ops != &tsi57x_switch_ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return;
+ }
+ rdev->rswitch->ops = NULL;
+ spin_unlock(&rdev->rswitch->lock);
+}
+
+static struct rio_device_id tsi57x_id_table[] = {
+ {RIO_DEVICE(RIO_DID_TSI572, RIO_VID_TUNDRA)},
+ {RIO_DEVICE(RIO_DID_TSI574, RIO_VID_TUNDRA)},
+ {RIO_DEVICE(RIO_DID_TSI577, RIO_VID_TUNDRA)},
+ {RIO_DEVICE(RIO_DID_TSI578, RIO_VID_TUNDRA)},
+ { 0, } /* terminate list */
+};
+
+static struct rio_driver tsi57x_driver = {
+ .name = "tsi57x",
+ .id_table = tsi57x_id_table,
+ .probe = tsi57x_probe,
+ .remove = tsi57x_remove,
+};
+
+static int __init tsi57x_init(void)
+{
+ return rio_register_driver(&tsi57x_driver);
+}
+
+static void __exit tsi57x_exit(void)
+{
+ rio_unregister_driver(&tsi57x_driver);
+}
+
+device_initcall(tsi57x_init);
+module_exit(tsi57x_exit);
+
+MODULE_DESCRIPTION("IDT Tsi57x Serial RapidIO switch family driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index eb58d2d..43d3cb3 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -285,13 +285,6 @@
VMLINUX_SYMBOL(__end_builtin_fw) = .; \
} \
\
- /* RapidIO route ops */ \
- .rio_ops : AT(ADDR(.rio_ops) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start_rio_switch_ops) = .; \
- *(.rio_switch_ops) \
- VMLINUX_SYMBOL(__end_rio_switch_ops) = .; \
- } \
- \
TRACEDATA \
\
/* Kernel symbol table: Normal symbols */ \
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 18e0993..fcd492e 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -94,6 +94,23 @@ union rio_pw_msg;
* @switchid: Switch ID that is unique across a network
* @route_table: Copy of switch routing table
* @port_ok: Status of each port (one bit per port) - OK=1 or UNINIT=0
+ * @ops: pointer to switch-specific operations
+ * @lock: lock to serialize operations updates
+ * @nextdev: Array of per-port pointers to the next attached device
+ */
+struct rio_switch {
+ struct list_head node;
+ u16 switchid;
+ u8 *route_table;
+ u32 port_ok;
+ struct rio_switch_ops *ops;
+ spinlock_t lock;
+ struct rio_dev *nextdev[0];
+};
+
+/**
+ * struct rio_switch_ops - Per-switch operations
+ * @owner: The module owner of this structure
* @add_entry: Callback for switch-specific route add function
* @get_entry: Callback for switch-specific route get function
* @clr_table: Callback for switch-specific clear route table function
@@ -101,14 +118,12 @@ union rio_pw_msg;
* @get_domain: Callback for switch-specific domain get function
* @em_init: Callback for switch-specific error management init function
* @em_handle: Callback for switch-specific error management handler function
- * @sw_sysfs: Callback that initializes switch-specific sysfs attributes
- * @nextdev: Array of per-port pointers to the next attached device
+ *
+ * Defines the operations that are necessary to initialize/control
+ * a particular RIO switch device.
*/
-struct rio_switch {
- struct list_head node;
- u16 switchid;
- u8 *route_table;
- u32 port_ok;
+struct rio_switch_ops {
+ struct module *owner;
int (*add_entry) (struct rio_mport *mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 route_port);
int (*get_entry) (struct rio_mport *mport, u16 destid, u8 hopcount,
@@ -121,8 +136,6 @@ struct rio_switch {
u8 *sw_domain);
int (*em_init) (struct rio_dev *dev);
int (*em_handle) (struct rio_dev *dev, u8 swport);
- int (*sw_sysfs) (struct rio_dev *dev, int create);
- struct rio_dev *nextdev[0];
};
/**
@@ -130,6 +143,7 @@ struct rio_switch {
* @global_list: Node in list of all RIO devices
* @net_list: Node in list of RIO devices in a network
* @net: Network this device is a part of
+ * @do_enum: Enumeration flag
* @did: Device ID
* @vid: Vendor ID
* @device_rev: Device revision
@@ -158,6 +172,7 @@ struct rio_dev {
struct list_head global_list; /* node in list of all RIO devices */
struct list_head net_list; /* node in per net list */
struct rio_net *net; /* RIO net this device resides in */
+ bool do_enum;
u16 did;
u16 vid;
u32 device_rev;
@@ -297,10 +312,6 @@ struct rio_net {
struct rio_id_table destid_table; /* destID allocation table */
};
-/* Definitions used by switch sysfs initialization callback */
-#define RIO_SW_SYSFS_CREATE 1 /* Create switch attributes */
-#define RIO_SW_SYSFS_REMOVE 0 /* Remove switch attributes */
-
/* Low-level architecture-dependent routines */
/**
@@ -400,20 +411,6 @@ struct rio_device_id {
u16 asm_did, asm_vid;
};
-/**
- * struct rio_switch_ops - Per-switch operations
- * @vid: RIO vendor ID
- * @did: RIO device ID
- * @init_hook: Callback that performs switch device initialization
- *
- * Defines the operations that are necessary to initialize/control
- * a particular RIO switch device.
- */
-struct rio_switch_ops {
- u16 vid, did;
- int (*init_hook) (struct rio_dev *rdev, int do_enum);
-};
-
union rio_pw_msg {
struct {
u32 comptag; /* Component Tag CSR */
--
1.7.8.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists